* CT6 CTX allocation cache
*/
static struct kmem_cache *ctx_cachep;
+/*
+ * error level for logging
+ */
+int ql_errlev = ql_log_all;
int ql2xlogintimeout = 20;
module_param(ql2xlogintimeout, int, S_IRUGO);
int ql2xextended_error_logging;
module_param(ql2xextended_error_logging, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xextended_error_logging,
- "Option to enable extended error logging, "
- "Default is 0 - no logging. 1 - log errors.");
+ "Option to enable extended error logging,\n"
+ "\t\tDefault is 0 - no logging. 0x40000000 - Module Init & Probe.\n"
+ "\t\t0x20000000 - Mailbox Cmnds. 0x10000000 - Device Discovery.\n"
+ "\t\t0x08000000 - IO tracing. 0x04000000 - DPC Thread.\n"
+ "\t\t0x02000000 - Async events. 0x01000000 - Timer routines.\n"
+ "\t\t0x00800000 - User space. 0x00400000 - Task Management.\n"
+ "\t\t0x00200000 - AER/EEH. 0x00100000 - Multi Q.\n"
+ "\t\t0x00080000 - P3P Specific. 0x00040000 - Virtual Port.\n"
+ "\t\t0x00020000 - Buffer Dump. 0x00010000 - Misc.\n"
+ "\t\t0x7fffffff - For enabling all logs, can be too many logs.\n"
+ "\t\tDo LOGICAL OR of the value to enable more than one level");
int ql2xshiftctondsd = 6;
module_param(ql2xshiftctondsd, int, S_IRUGO);
"Maximum queue depth to report for target devices.");
/* Do not change the value of this after module load */
-int ql2xenabledif = 1;
+int ql2xenabledif = 0;
module_param(ql2xenabledif, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xenabledif,
" Enable T10-CRC-DIF "
- " Default is 0 - No DIF Support. 1 - Enable it");
+ " Default is 0 - No DIF Support. 1 - Enable it"
+ ", 2 - Enable DIF for all types, except Type 0.");
-int ql2xenablehba_err_chk;
+int ql2xenablehba_err_chk = 2;
module_param(ql2xenablehba_err_chk, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xenablehba_err_chk,
- " Enable T10-CRC-DIF Error isolation by HBA"
- " Default is 0 - Error isolation disabled, 1 - Enable it");
+ " Enable T10-CRC-DIF Error isolation by HBA:\n"
+ " Default is 1.\n"
+ " 0 -- Error isolation disabled\n"
+ " 1 -- Error isolation enabled only for DIX Type 0\n"
+ " 2 -- Error isolation enabled for all Types\n");
int ql2xiidmaenable=1;
module_param(ql2xiidmaenable, int, S_IRUGO);
int ql2xfwloadbin;
module_param(ql2xfwloadbin, int, S_IRUGO);
MODULE_PARM_DESC(ql2xfwloadbin,
- "Option to specify location from which to load ISP firmware:\n"
- " 2 -- load firmware via the request_firmware() (hotplug)\n"
+ "Option to specify location from which to load ISP firmware:.\n"
+ " 2 -- load firmware via the request_firmware() (hotplug).\n"
" interface.\n"
" 1 -- load firmware from flash.\n"
" 0 -- use default semantics.\n");
int ql2xdbwr = 1;
module_param(ql2xdbwr, int, S_IRUGO);
MODULE_PARM_DESC(ql2xdbwr,
- "Option to specify scheme for request queue posting\n"
+ "Option to specify scheme for request queue posting.\n"
" 0 -- Regular doorbell.\n"
" 1 -- CAMRAM doorbell (faster).\n");
int ql2xdontresethba;
module_param(ql2xdontresethba, int, S_IRUGO);
MODULE_PARM_DESC(ql2xdontresethba,
- "Option to specify reset behaviour\n"
+ "Option to specify reset behaviour.\n"
" 0 (Default) -- Reset on failure.\n"
" 1 -- Do not reset on failure.\n");
qla2x00_restart_timer(scsi_qla_host_t *vha, unsigned long interval)
{
/* Currently used for 82XX only. */
- if (vha->device_flags & DFLG_DEV_FAILED)
+ if (vha->device_flags & DFLG_DEV_FAILED) {
+ ql_dbg(ql_dbg_timer, vha, 0x600d,
+ "Device in a failed state, returning.\n");
return;
+ }
mod_timer(&vha->timer, jiffies + interval * HZ);
}
/* -------------------------------------------------------------------------- */
static int qla2x00_alloc_queues(struct qla_hw_data *ha)
{
+ scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
ha->req_q_map = kzalloc(sizeof(struct req_que *) * ha->max_req_queues,
GFP_KERNEL);
if (!ha->req_q_map) {
- qla_printk(KERN_WARNING, ha,
- "Unable to allocate memory for request queue ptrs\n");
+ ql_log(ql_log_fatal, vha, 0x003b,
+ "Unable to allocate memory for request queue ptrs.\n");
goto fail_req_map;
}
ha->rsp_q_map = kzalloc(sizeof(struct rsp_que *) * ha->max_rsp_queues,
GFP_KERNEL);
if (!ha->rsp_q_map) {
- qla_printk(KERN_WARNING, ha,
- "Unable to allocate memory for response queue ptrs\n");
+ ql_log(ql_log_fatal, vha, 0x003c,
+ "Unable to allocate memory for response queue ptrs.\n");
goto fail_rsp_map;
}
set_bit(0, ha->rsp_qid_map);
struct qla_hw_data *ha = vha->hw;
if (!(ha->fw_attributes & BIT_6)) {
- qla_printk(KERN_INFO, ha,
- "Firmware is not multi-queue capable\n");
+ ql_log(ql_log_warn, vha, 0x00d8,
+ "Firmware is not multi-queue capable.\n");
goto fail;
}
if (ql2xmultique_tag) {
req = qla25xx_create_req_que(ha, options, 0, 0, -1,
QLA_DEFAULT_QUE_QOS);
if (!req) {
- qla_printk(KERN_WARNING, ha,
- "Can't create request queue\n");
+ ql_log(ql_log_warn, vha, 0x00e0,
+ "Failed to create request queue.\n");
goto fail;
}
ha->wq = alloc_workqueue("qla2xxx_wq", WQ_MEM_RECLAIM, 1);
for (ques = 1; ques < ha->max_rsp_queues; ques++) {
ret = qla25xx_create_rsp_que(ha, options, 0, 0, req);
if (!ret) {
- qla_printk(KERN_WARNING, ha,
- "Response Queue create failed\n");
+ ql_log(ql_log_warn, vha, 0x00e8,
+ "Failed to create response queue.\n");
goto fail2;
}
}
ha->flags.cpu_affinity_enabled = 1;
-
- DEBUG2(qla_printk(KERN_INFO, ha,
- "CPU affinity mode enabled, no. of response"
- " queues:%d, no. of request queues:%d\n",
- ha->max_rsp_queues, ha->max_req_queues));
+ ql_dbg(ql_dbg_multiq, vha, 0xc007,
+ "CPU affinity mode enalbed, "
+ "no. of response queues:%d no. of request queues:%d.\n",
+ ha->max_rsp_queues, ha->max_req_queues);
+ ql_dbg(ql_dbg_init, vha, 0x00e9,
+ "CPU affinity mode enalbed, "
+ "no. of response queues:%d no. of request queues:%d.\n",
+ ha->max_rsp_queues, ha->max_req_queues);
}
return 0;
fail2:
struct qla_hw_data *ha = vha->hw;
sp = mempool_alloc(ha->srb_mempool, GFP_ATOMIC);
- if (!sp)
+ if (!sp) {
+ ql_log(ql_log_warn, vha, 0x3006,
+ "Memory allocation failed for sp.\n");
return sp;
+ }
atomic_set(&sp->ref_count, 1);
sp->fcport = fcport;
int rval;
if (ha->flags.eeh_busy) {
- if (ha->flags.pci_channel_io_perm_failure)
+ if (ha->flags.pci_channel_io_perm_failure) {
+ ql_dbg(ql_dbg_io, vha, 0x3001,
+ "PCI Channel IO permanent failure, exiting "
+ "cmd=%p.\n", cmd);
cmd->result = DID_NO_CONNECT << 16;
- else
+ } else {
+ ql_dbg(ql_dbg_io, vha, 0x3002,
+ "EEH_Busy, Requeuing the cmd=%p.\n", cmd);
cmd->result = DID_REQUEUE << 16;
+ }
goto qc24_fail_command;
}
rval = fc_remote_port_chkready(rport);
if (rval) {
cmd->result = rval;
+ ql_dbg(ql_dbg_io, vha, 0x3003,
+ "fc_remote_port_chkready failed for cmd=%p, rval=0x%x.\n",
+ cmd, rval);
goto qc24_fail_command;
}
if (!vha->flags.difdix_supported &&
scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) {
- DEBUG2(qla_printk(KERN_ERR, ha,
- "DIF Cap Not Reg, fail DIF capable cmd's:%x\n",
- cmd->cmnd[0]));
+ ql_dbg(ql_dbg_io, vha, 0x3004,
+ "DIF Cap not reg, fail DIF capable cmd's:%p.\n",
+ cmd);
cmd->result = DID_NO_CONNECT << 16;
goto qc24_fail_command;
}
if (atomic_read(&fcport->state) != FCS_ONLINE) {
if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
+ ql_dbg(ql_dbg_io, vha, 0x3005,
+ "Returning DNC, fcport_state=%d loop_state=%d.\n",
+ atomic_read(&fcport->state),
+ atomic_read(&base_vha->loop_state));
cmd->result = DID_NO_CONNECT << 16;
goto qc24_fail_command;
}
goto qc24_host_busy;
rval = ha->isp_ops->start_scsi(sp);
- if (rval != QLA_SUCCESS)
+ if (rval != QLA_SUCCESS) {
+ ql_dbg(ql_dbg_io, vha, 0x3013,
+ "Start scsi failed rval=%d for cmd=%p.\n", rval, cmd);
goto qc24_host_busy_free_sp;
+ }
return 0;
int ret = QLA_SUCCESS;
if (unlikely(pci_channel_offline(ha->pdev)) || ha->flags.eeh_busy) {
- DEBUG17(qla_printk(KERN_WARNING, ha, "return:eh_wait\n"));
+ ql_dbg(ql_dbg_taskm, vha, 0x8005,
+ "Return:eh_wait.\n");
return ret;
}
else
return_status = QLA_FUNCTION_FAILED;
- DEBUG2(printk("%s return_status=%d\n", __func__, return_status));
+ ql_dbg(ql_dbg_taskm, vha, 0x8019,
+ "%s return status=%d.\n", __func__, return_status);
return return_status;
}
int wait = 0;
struct qla_hw_data *ha = vha->hw;
+ ql_dbg(ql_dbg_taskm, vha, 0x8000,
+ "Entered %s for cmd=%p.\n", __func__, cmd);
if (!CMD_SP(cmd))
return SUCCESS;
ret = fc_block_scsi_eh(cmd);
+ ql_dbg(ql_dbg_taskm, vha, 0x8001,
+ "Return value of fc_block_scsi_eh=%d.\n", ret);
if (ret != 0)
return ret;
ret = SUCCESS;
return SUCCESS;
}
- DEBUG2(printk("%s(%ld): aborting sp %p from RISC.",
- __func__, vha->host_no, sp));
+ ql_dbg(ql_dbg_taskm, vha, 0x8002,
+ "Aborting sp=%p cmd=%p from RISC ", sp, cmd);
/* Get a reference to the sp and drop the lock.*/
sp_get(sp);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (ha->isp_ops->abort_command(sp)) {
- DEBUG2(printk("%s(%ld): abort_command "
- "mbx failed.\n", __func__, vha->host_no));
- ret = FAILED;
+ ql_dbg(ql_dbg_taskm, vha, 0x8003,
+ "Abort command mbx failed for cmd=%p.\n", cmd);
} else {
- DEBUG3(printk("%s(%ld): abort_command "
- "mbx success.\n", __func__, vha->host_no));
+ ql_dbg(ql_dbg_taskm, vha, 0x8004,
+ "Abort command mbx success.\n");
wait = 1;
}
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
qla2x00_sp_compl(ha, sp);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Wait for the command to be returned. */
if (wait) {
if (qla2x00_eh_wait_on_command(cmd) != QLA_SUCCESS) {
- qla_printk(KERN_ERR, ha,
- "scsi(%ld:%d:%d): Abort handler timed out -- %x.\n",
- vha->host_no, id, lun, ret);
+ ql_log(ql_log_warn, vha, 0x8006,
+ "Abort handler timed out for cmd=%p.\n", cmd);
ret = FAILED;
}
}
- qla_printk(KERN_INFO, ha,
- "scsi(%ld:%d:%d): Abort command issued -- %d %x.\n",
- vha->host_no, id, lun, wait, ret);
+ ql_log(ql_log_info, vha, 0x801c,
+ "Abort command issued -- %d %x.\n", wait, ret);
return ret;
}
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
int err;
- if (!fcport)
+ if (!fcport) {
+ ql_log(ql_log_warn, vha, 0x8007,
+ "fcport is NULL.\n");
return FAILED;
+ }
err = fc_block_scsi_eh(cmd);
+ ql_dbg(ql_dbg_taskm, vha, 0x8008,
+ "fc_block_scsi_eh ret=%d.\n", err);
if (err != 0)
return err;
- qla_printk(KERN_INFO, vha->hw, "scsi(%ld:%d:%d): %s RESET ISSUED.\n",
- vha->host_no, cmd->device->id, cmd->device->lun, name);
+ ql_log(ql_log_info, vha, 0x8009,
+ "%s RESET ISSUED for id %d lun %d cmd=%p.\n", name,
+ cmd->device->id, cmd->device->lun, cmd);
err = 0;
- if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS)
+ if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
+ ql_log(ql_log_warn, vha, 0x800a,
+ "Wait for hba online failed for cmd=%p.\n", cmd);
goto eh_reset_failed;
+ }
err = 1;
- if (qla2x00_wait_for_loop_ready(vha) != QLA_SUCCESS)
+ if (qla2x00_wait_for_loop_ready(vha) != QLA_SUCCESS) {
+ ql_log(ql_log_warn, vha, 0x800b,
+ "Wait for loop ready failed for cmd=%p.\n", cmd);
goto eh_reset_failed;
+ }
err = 2;
if (do_reset(fcport, cmd->device->lun, cmd->request->cpu + 1)
- != QLA_SUCCESS)
+ != QLA_SUCCESS) {
+ ql_log(ql_log_warn, vha, 0x800c,
+ "do_reset failed for cmd=%p.\n", cmd);
goto eh_reset_failed;
+ }
err = 3;
if (qla2x00_eh_wait_for_pending_commands(vha, cmd->device->id,
- cmd->device->lun, type) != QLA_SUCCESS)
+ cmd->device->lun, type) != QLA_SUCCESS) {
+ ql_log(ql_log_warn, vha, 0x800d,
+ "wait for peding cmds failed for cmd=%p.\n", cmd);
goto eh_reset_failed;
+ }
- qla_printk(KERN_INFO, vha->hw, "scsi(%ld:%d:%d): %s RESET SUCCEEDED.\n",
- vha->host_no, cmd->device->id, cmd->device->lun, name);
+ ql_log(ql_log_info, vha, 0x800e,
+ "%s RESET SUCCEEDED for id %d lun %d cmd=%p.\n", name,
+ cmd->device->id, cmd->device->lun, cmd);
return SUCCESS;
eh_reset_failed:
- qla_printk(KERN_INFO, vha->hw, "scsi(%ld:%d:%d): %s RESET FAILED: %s.\n"
- , vha->host_no, cmd->device->id, cmd->device->lun, name,
- reset_errors[err]);
+ ql_log(ql_log_info, vha, 0x800f,
+ "%s RESET FAILED: %s for id %d lun %d cmd=%p.\n", name,
+ reset_errors[err], cmd->device->id, cmd->device->lun);
return FAILED;
}
id = cmd->device->id;
lun = cmd->device->lun;
- if (!fcport)
+ if (!fcport) {
+ ql_log(ql_log_warn, vha, 0x8010,
+ "fcport is NULL.\n");
return ret;
+ }
ret = fc_block_scsi_eh(cmd);
+ ql_dbg(ql_dbg_taskm, vha, 0x8011,
+ "fc_block_scsi_eh ret=%d.\n", ret);
if (ret != 0)
return ret;
ret = FAILED;
- qla_printk(KERN_INFO, vha->hw,
- "scsi(%ld:%d:%d): BUS RESET ISSUED.\n", vha->host_no, id, lun);
+ ql_log(ql_log_info, vha, 0x8012,
+ "BUS RESET ISSUED for id %d lun %d.\n", id, lun);
if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
- DEBUG2(printk("%s failed:board disabled\n",__func__));
+ ql_log(ql_log_fatal, vha, 0x8013,
+ "Wait for hba online failed board disabled.\n");
goto eh_bus_reset_done;
}
/* Flush outstanding commands. */
if (qla2x00_eh_wait_for_pending_commands(vha, 0, 0, WAIT_HOST) !=
- QLA_SUCCESS)
+ QLA_SUCCESS) {
+ ql_log(ql_log_warn, vha, 0x8014,
+ "Wait for pending commands failed.\n");
ret = FAILED;
+ }
eh_bus_reset_done:
- qla_printk(KERN_INFO, vha->hw, "%s: reset %s\n", __func__,
- (ret == FAILED) ? "failed" : "succeeded");
+ ql_log(ql_log_warn, vha, 0x802b,
+ "BUS RESET %s.\n", (ret == FAILED) ? "FAILED" : "SUCCEDED");
return ret;
}
id = cmd->device->id;
lun = cmd->device->lun;
- if (!fcport)
+ if (!fcport) {
+ ql_log(ql_log_warn, vha, 0x8016,
+ "fcport is NULL.\n");
return ret;
+ }
ret = fc_block_scsi_eh(cmd);
+ ql_dbg(ql_dbg_taskm, vha, 0x8017,
+ "fc_block_scsi_eh ret=%d.\n", ret);
if (ret != 0)
return ret;
ret = FAILED;
- qla_printk(KERN_INFO, ha,
- "scsi(%ld:%d:%d): ADAPTER RESET ISSUED.\n", vha->host_no, id, lun);
+ ql_log(ql_log_info, vha, 0x8018,
+ "ADAPTER RESET ISSUED for id %d lun %d.\n", id, lun);
if (qla2x00_wait_for_reset_ready(vha) != QLA_SUCCESS)
goto eh_host_reset_lock;
/* failed. schedule dpc to try */
set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags);
- if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS)
+ if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
+ ql_log(ql_log_warn, vha, 0x802a,
+ "wait for hba online failed.\n");
goto eh_host_reset_lock;
+ }
}
clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
}
ret = SUCCESS;
eh_host_reset_lock:
- qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
+ qla_printk(KERN_INFO, ha, "%s: reset %s.\n", __func__,
(ret == FAILED) ? "failed" : "succeeded");
return ret;
ret = ha->isp_ops->target_reset(fcport, 0, 0);
if (ret != QLA_SUCCESS) {
- DEBUG2_3(printk("%s(%ld): bus_reset failed: "
- "target_reset=%d d_id=%x.\n", __func__,
- vha->host_no, ret, fcport->d_id.b24));
+ ql_dbg(ql_dbg_taskm, vha, 0x802c,
+ "Bus Reset failed: Target Reset=%d "
+ "d_id=%x.\n", ret, fcport->d_id.b24);
}
}
}
if (ha->flags.enable_lip_full_login && !IS_QLA8XXX_TYPE(ha)) {
ret = qla2x00_full_login_lip(vha);
if (ret != QLA_SUCCESS) {
- DEBUG2_3(printk("%s(%ld): failed: "
- "full_login_lip=%d.\n", __func__, vha->host_no,
- ret));
+ ql_dbg(ql_dbg_taskm, vha, 0x802d,
+ "full_login_lip=%d.\n", ret);
}
atomic_set(&vha->loop_state, LOOP_DOWN);
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
if (ha->flags.enable_lip_reset) {
ret = qla2x00_lip_reset(vha);
if (ret != QLA_SUCCESS) {
- DEBUG2_3(printk("%s(%ld): failed: "
- "lip_reset=%d.\n", __func__, vha->host_no, ret));
+ ql_dbg(ql_dbg_taskm, vha, 0x802e,
+ "lip_reset failed (%d).\n", ret);
} else
qla2x00_wait_for_loop_ready(vha);
}
if (!scsi_track_queue_full(sdev, qdepth))
return;
- DEBUG2(qla_printk(KERN_INFO, fcport->vha->hw,
- "scsi(%ld:%d:%d:%d): Queue depth adjusted-down to %d.\n",
- fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun,
- sdev->queue_depth));
+ ql_dbg(ql_dbg_io, fcport->vha, 0x3029,
+ "Queue depth adjusted-down "
+ "to %d for scsi(%ld:%d:%d:%d).\n",
+ sdev->queue_depth, fcport->vha->host_no,
+ sdev->channel, sdev->id, sdev->lun);
}
static void qla2x00_adjust_sdev_qdepth_up(struct scsi_device *sdev, int qdepth)
{
fc_port_t *fcport = sdev->hostdata;
struct scsi_qla_host *vha = fcport->vha;
- struct qla_hw_data *ha = vha->hw;
struct req_que *req = NULL;
req = vha->req;
else
scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, qdepth);
- DEBUG2(qla_printk(KERN_INFO, ha,
- "scsi(%ld:%d:%d:%d): Queue depth adjusted-up to %d.\n",
- fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun,
- sdev->queue_depth));
+ ql_dbg(ql_dbg_io, vha, 0x302a,
+ "Queue depth adjusted-up to %d for "
+ "scsi(%ld:%d:%d:%d).\n",
+ sdev->queue_depth, fcport->vha->host_no,
+ sdev->channel, sdev->id, sdev->lun);
}
static int
ha->flags.port0 = 1;
else
ha->flags.port0 = 0;
+ ql_dbg_pci(ql_dbg_init, ha->pdev, 0x000b,
+ "device_type=0x%x port=%d fw_srisc_address=%p.\n",
+ ha->device_type, ha->flags.port0, ha->fw_srisc_address);
}
static int
if (pci_request_selected_regions(ha->pdev, ha->bars,
QLA2XXX_DRIVER_NAME)) {
- qla_printk(KERN_WARNING, ha,
- "Failed to reserve PIO/MMIO regions (%s)\n",
+ ql_log_pci(ql_log_fatal, ha->pdev, 0x0011,
+ "Failed to reserve PIO/MMIO regions (%s), aborting.\n",
pci_name(ha->pdev));
-
goto iospace_error_exit;
}
if (!(ha->bars & 1))
pio = pci_resource_start(ha->pdev, 0);
if (pci_resource_flags(ha->pdev, 0) & IORESOURCE_IO) {
if (pci_resource_len(ha->pdev, 0) < MIN_IOBASE_LEN) {
- qla_printk(KERN_WARNING, ha,
- "Invalid PCI I/O region size (%s)...\n",
- pci_name(ha->pdev));
+ ql_log_pci(ql_log_warn, ha->pdev, 0x0012,
+ "Invalid pci I/O region size (%s).\n",
+ pci_name(ha->pdev));
pio = 0;
}
} else {
- qla_printk(KERN_WARNING, ha,
- "region #0 not a PIO resource (%s)...\n",
+ ql_log_pci(ql_log_warn, ha->pdev, 0x0013,
+ "Region #0 no a PIO resource (%s).\n",
pci_name(ha->pdev));
pio = 0;
}
ha->pio_address = pio;
+ ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0014,
+ "PIO address=%p.\n",
+ ha->pio_address);
skip_pio:
/* Use MMIO operations for all accesses. */
if (!(pci_resource_flags(ha->pdev, 1) & IORESOURCE_MEM)) {
- qla_printk(KERN_ERR, ha,
- "region #1 not an MMIO resource (%s), aborting\n",
+ ql_log_pci(ql_log_fatal, ha->pdev, 0x0015,
+ "Region #1 not an MMIO resource (%s), aborting.\n",
pci_name(ha->pdev));
goto iospace_error_exit;
}
if (pci_resource_len(ha->pdev, 1) < MIN_IOBASE_LEN) {
- qla_printk(KERN_ERR, ha,
- "Invalid PCI mem region size (%s), aborting\n",
- pci_name(ha->pdev));
+ ql_log_pci(ql_log_fatal, ha->pdev, 0x0016,
+ "Invalid PCI mem region size (%s), aborting.\n",
+ pci_name(ha->pdev));
goto iospace_error_exit;
}
ha->iobase = ioremap(pci_resource_start(ha->pdev, 1), MIN_IOBASE_LEN);
if (!ha->iobase) {
- qla_printk(KERN_ERR, ha,
- "cannot remap MMIO (%s), aborting\n", pci_name(ha->pdev));
-
+ ql_log_pci(ql_log_fatal, ha->pdev, 0x0017,
+ "Cannot remap MMIO (%s), aborting.\n",
+ pci_name(ha->pdev));
goto iospace_error_exit;
}
ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 3),
pci_resource_len(ha->pdev, 3));
if (ha->mqiobase) {
+ ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0018,
+ "MQIO Base=%p.\n", ha->mqiobase);
/* Read MSIX vector size of the board */
pci_read_config_word(ha->pdev, QLA_PCI_MSIX_CONTROL, &msix);
ha->msix_count = msix;
ha->max_req_queues = 2;
} else if (ql2xmaxqueues > 1) {
ha->max_req_queues = ql2xmaxqueues > QLA_MQ_SIZE ?
- QLA_MQ_SIZE : ql2xmaxqueues;
- DEBUG2(qla_printk(KERN_INFO, ha, "QoS mode set, max no"
- " of request queues:%d\n", ha->max_req_queues));
+ QLA_MQ_SIZE : ql2xmaxqueues;
+ ql_dbg_pci(ql_dbg_multiq, ha->pdev, 0xc008,
+ "QoS mode set, max no of request queues:%d.\n",
+ ha->max_req_queues);
+ ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0019,
+ "QoS mode set, max no of request queues:%d.\n",
+ ha->max_req_queues);
}
- qla_printk(KERN_INFO, ha,
- "MSI-X vector count: %d\n", msix);
+ ql_log_pci(ql_log_info, ha->pdev, 0x001a,
+ "MSI-X vector count: %d.\n", msix);
} else
- qla_printk(KERN_INFO, ha, "BAR 3 not enabled\n");
+ ql_log_pci(ql_log_info, ha->pdev, 0x001b,
+ "BAR 3 not enabled.\n");
mqiobase_exit:
ha->msix_count = ha->max_rsp_queues + 1;
+ ql_dbg_pci(ql_dbg_init, ha->pdev, 0x001c,
+ "MSIX Count:%d.\n", ha->msix_count);
return (0);
iospace_error_exit:
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8021) {
bars = pci_select_bars(pdev, IORESOURCE_MEM);
mem_only = 1;
+ ql_dbg_pci(ql_dbg_init, pdev, 0x0007,
+ "Mem only adapter.\n");
}
+ ql_dbg_pci(ql_dbg_init, pdev, 0x0008,
+ "Bars=%d.\n", bars);
if (mem_only) {
if (pci_enable_device_mem(pdev))
ha = kzalloc(sizeof(struct qla_hw_data), GFP_KERNEL);
if (!ha) {
- DEBUG(printk("Unable to allocate memory for ha\n"));
+ ql_log_pci(ql_log_fatal, pdev, 0x0009,
+ "Unable to allocate memory for ha.\n");
goto probe_out;
}
+ ql_dbg_pci(ql_dbg_init, pdev, 0x000a,
+ "Memory allocated for ha=%p.\n", ha);
ha->pdev = pdev;
/* Clear our data area */
if (ret)
goto probe_hw_failed;
- qla_printk(KERN_INFO, ha,
- "Found an ISP%04X, irq %d, iobase 0x%p\n", pdev->device, pdev->irq,
- ha->iobase);
-
+ ql_log_pci(ql_log_info, pdev, 0x001d,
+ "Found an ISP%04X irq %d iobase 0x%p.\n",
+ pdev->device, pdev->irq, ha->iobase);
ha->prev_topology = 0;
ha->init_cb_size = sizeof(init_cb_t);
ha->link_data_rate = PORT_SPEED_UNKNOWN;
ha->nvram_conf_off = FARX_ACCESS_NVRAM_CONF;
ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA;
}
-
+ ql_dbg_pci(ql_dbg_init, pdev, 0x001e,
+ "mbx_count=%d, req_length=%d, "
+ "rsp_length=%d, max_loop_id=%d, init_cb_size=%d, "
+ "gid_list_info_size=%d, optrom_size=%d, nvram_npiv_size=%d, .\n",
+ ha->mbx_count, req_length, rsp_length, ha->max_loop_id,
+ ha->init_cb_size, ha->gid_list_info_size, ha->optrom_size,
+ ha->nvram_npiv_size);
+ ql_dbg_pci(ql_dbg_init, pdev, 0x001f,
+ "isp_ops=%p, flash_conf_off=%d, "
+ "flash_data_off=%d, nvram_conf_off=%d, nvram_data_off=%d.\n",
+ ha->isp_ops, ha->flash_conf_off, ha->flash_data_off,
+ ha->nvram_conf_off, ha->nvram_data_off);
mutex_init(&ha->vport_lock);
init_completion(&ha->mbx_cmd_comp);
complete(&ha->mbx_cmd_comp);
set_bit(0, (unsigned long *) ha->vp_idx_map);
qla2x00_config_dma_addressing(ha);
+ ql_dbg_pci(ql_dbg_init, pdev, 0x0020,
+ "64 Bit addressing is %s.\n",
+ ha->flags.enable_64bit_addressing ? "enable" :
+ "disable");
ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp);
if (!ret) {
- qla_printk(KERN_WARNING, ha,
- "[ERROR] Failed to allocate memory for adapter\n");
+ ql_log_pci(ql_log_fatal, pdev, 0x0031,
+ "Failed to allocate memory for adapter, aborting.\n");
goto probe_hw_failed;
}
base_vha = qla2x00_create_host(sht, ha);
if (!base_vha) {
- qla_printk(KERN_WARNING, ha,
- "[ERROR] Failed to allocate memory for scsi_host\n");
-
ret = -ENOMEM;
qla2x00_mem_free(ha);
qla2x00_free_req_que(ha, req);
if (!IS_QLA82XX(ha))
host->sg_tablesize = QLA_SG_ALL;
}
-
+ ql_dbg(ql_dbg_init, base_vha, 0x0032,
+ "can_queue=%d, req=%p, "
+ "mgmt_svr_loop_id=%d, sg_tablesize=%d.\n",
+ host->can_queue, base_vha->req,
+ base_vha->mgmt_svr_loop_id, host->sg_tablesize);
host->max_id = max_id;
host->this_id = 255;
host->cmd_per_lun = 3;
host->unique_id = host->host_no;
- if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif)
+ if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif)
host->max_cmd_len = 32;
else
host->max_cmd_len = MAX_CMDSZ;
host->transportt = qla2xxx_transport_template;
sht->vendor_id = (SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_QLOGIC);
+ ql_dbg(ql_dbg_init, base_vha, 0x0033,
+ "max_id=%d this_id=%d "
+ "cmd_per_len=%d unique_id=%d max_cmd_len=%d max_channel=%d "
+ "max_lun=%d transportt=%p, vendor_id=%d.\n", host->max_id,
+ host->this_id, host->cmd_per_lun, host->unique_id,
+ host->max_cmd_len, host->max_channel, host->max_lun,
+ host->transportt, sht->vendor_id);
+
/* Set up the irqs */
ret = qla2x00_request_irqs(ha, rsp);
if (ret)
/* Alloc arrays of request and response ring ptrs */
que_init:
if (!qla2x00_alloc_queues(ha)) {
- qla_printk(KERN_WARNING, ha,
- "[ERROR] Failed to allocate memory for queue"
- " pointers\n");
+ ql_log(ql_log_fatal, base_vha, 0x003d,
+ "Failed to allocate memory for queue pointers.. aborting.\n");
goto probe_init_failed;
}
rsp->rsp_q_out = &ha->iobase->isp82.rsp_q_out[0];
}
- if (qla2x00_initialize_adapter(base_vha)) {
- qla_printk(KERN_WARNING, ha,
- "Failed to initialize adapter\n");
+ ql_dbg(ql_dbg_multiq, base_vha, 0xc009,
+ "rsp_q_map=%p req_q_map=%p rsp->req=%p req->rsp=%p.\n",
+ ha->rsp_q_map, ha->req_q_map, rsp->req, req->rsp);
+ ql_dbg(ql_dbg_multiq, base_vha, 0xc00a,
+ "req->req_q_in=%p req->req_q_out=%p "
+ "rsp->rsp_q_in=%p rsp->rsp_q_out=%p.\n",
+ req->req_q_in, req->req_q_out,
+ rsp->rsp_q_in, rsp->rsp_q_out);
+ ql_dbg(ql_dbg_init, base_vha, 0x003e,
+ "rsp_q_map=%p req_q_map=%p rsp->req=%p req->rsp=%p.\n",
+ ha->rsp_q_map, ha->req_q_map, rsp->req, req->rsp);
+ ql_dbg(ql_dbg_init, base_vha, 0x003f,
+ "req->req_q_in=%p req->req_q_out=%p rsp->rsp_q_in=%p rsp->rsp_q_out=%p.\n",
+ req->req_q_in, req->req_q_out, rsp->rsp_q_in, rsp->rsp_q_out);
- DEBUG2(printk("scsi(%ld): Failed to initialize adapter - "
- "Adapter flags %x.\n",
- base_vha->host_no, base_vha->device_flags));
+ if (qla2x00_initialize_adapter(base_vha)) {
+ ql_log(ql_log_fatal, base_vha, 0x00d6,
+ "Failed to initialize adapter - Adapter flags %x.\n",
+ base_vha->device_flags);
if (IS_QLA82XX(ha)) {
qla82xx_idc_lock(ha);
qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
QLA82XX_DEV_FAILED);
qla82xx_idc_unlock(ha);
- qla_printk(KERN_INFO, ha, "HW State: FAILED\n");
+ ql_log(ql_log_fatal, base_vha, 0x00d7,
+ "HW State: FAILED.\n");
}
ret = -ENODEV;
if (ha->mqenable) {
if (qla25xx_setup_mode(base_vha)) {
- qla_printk(KERN_WARNING, ha,
- "Can't create queues, falling back to single"
- " queue mode\n");
+ ql_log(ql_log_warn, base_vha, 0x00ec,
+ "Failed to create queues, falling back to single queue mode.\n");
goto que_init;
}
}
* Startup the kernel thread for this host adapter
*/
ha->dpc_thread = kthread_create(qla2x00_do_dpc, ha,
- "%s_dpc", base_vha->host_str);
+ "%s_dpc", base_vha->host_str);
if (IS_ERR(ha->dpc_thread)) {
- qla_printk(KERN_WARNING, ha,
- "Unable to start DPC thread!\n");
+ ql_log(ql_log_fatal, base_vha, 0x00ed,
+ "Failed to start DPC thread.\n");
ret = PTR_ERR(ha->dpc_thread);
goto probe_failed;
}
+ ql_dbg(ql_dbg_init, base_vha, 0x00ee,
+ "DPC thread started successfully.\n");
skip_dpc:
list_add_tail(&base_vha->list, &ha->vp_list);
/* Initialized the timer */
qla2x00_start_timer(base_vha, qla2x00_timer, WATCH_INTERVAL);
-
- DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n",
- base_vha->host_no, ha));
-
- if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) {
+ ql_dbg(ql_dbg_init, base_vha, 0x00ef,
+ "Started qla2x00_timer with "
+ "interval=%d.\n", WATCH_INTERVAL);
+ ql_dbg(ql_dbg_init, base_vha, 0x00f0,
+ "Detected hba at address=%p.\n",
+ ha);
+
+ if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) {
if (ha->fw_attributes & BIT_4) {
+ int prot = 0;
base_vha->flags.difdix_supported = 1;
- DEBUG18(qla_printk(KERN_INFO, ha,
- "Registering for DIF/DIX type 1 and 3"
- " protection.\n"));
+ ql_dbg(ql_dbg_init, base_vha, 0x00f1,
+ "Registering for DIF/DIX type 1 and 3 protection.\n");
+ if (ql2xenabledif == 1)
+ prot = SHOST_DIX_TYPE0_PROTECTION;
scsi_host_set_prot(host,
- SHOST_DIF_TYPE1_PROTECTION
+ prot | SHOST_DIF_TYPE1_PROTECTION
| SHOST_DIF_TYPE2_PROTECTION
| SHOST_DIF_TYPE3_PROTECTION
| SHOST_DIX_TYPE1_PROTECTION
base_vha->flags.init_done = 1;
base_vha->flags.online = 1;
+ ql_dbg(ql_dbg_init, base_vha, 0x00f2,
+ "Init done and hba is online.\n");
+
scsi_scan_host(host);
qla2x00_alloc_sysfs_attr(base_vha);
qla2x00_dfs_setup(base_vha);
- qla_printk(KERN_INFO, ha, "\n"
- " QLogic Fibre Channel HBA Driver: %s\n"
- " QLogic %s - %s\n"
- " ISP%04X: %s @ %s hdma%c, host#=%ld, fw=%s\n",
- qla2x00_version_str, ha->model_number,
- ha->model_desc ? ha->model_desc : "", pdev->device,
- ha->isp_ops->pci_info_str(base_vha, pci_info), pci_name(pdev),
- ha->flags.enable_64bit_addressing ? '+' : '-', base_vha->host_no,
+ ql_log(ql_log_info, base_vha, 0x00fa,
+ "QLogic Fibre Channed HBA Driver: %s.\n",
+ qla2x00_version_str);
+ ql_log(ql_log_info, base_vha, 0x00fb,
+ "QLogic %s - %s.\n",
+ ha->model_number, ha->model_desc ? ha->model_desc : "");
+ ql_log(ql_log_info, base_vha, 0x00fc,
+ "ISP%04X: %s @ %s hdma%c host#=%ld fw=%s.\n",
+ pdev->device, ha->isp_ops->pci_info_str(base_vha, pci_info),
+ pci_name(pdev), ha->flags.enable_64bit_addressing ? '+' : '-',
+ base_vha->host_no,
ha->isp_ops->fw_version_str(base_vha, fw_str));
return 0;
fcport->login_retry = vha->hw->login_retry_count;
set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
- DEBUG(printk("scsi(%ld): Port login retry: "
+ ql_dbg(ql_dbg_disc, vha, 0x2067,
+ "Port login retry "
"%02x%02x%02x%02x%02x%02x%02x%02x, "
- "id = 0x%04x retry cnt=%d\n",
- vha->host_no,
- fcport->port_name[0],
- fcport->port_name[1],
- fcport->port_name[2],
- fcport->port_name[3],
- fcport->port_name[4],
- fcport->port_name[5],
- fcport->port_name[6],
- fcport->port_name[7],
- fcport->loop_id,
- fcport->login_retry));
+ "id = 0x%04x retry cnt=%d.\n",
+ fcport->port_name[0], fcport->port_name[1],
+ fcport->port_name[2], fcport->port_name[3],
+ fcport->port_name[4], fcport->port_name[5],
+ fcport->port_name[6], fcport->port_name[7],
+ fcport->loop_id, fcport->login_retry);
}
}
ctx_cachep);
if (!ha->ctx_mempool)
goto fail_free_srb_mempool;
+ ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0021,
+ "ctx_cachep=%p ctx_mempool=%p.\n",
+ ctx_cachep, ha->ctx_mempool);
}
/* Get memory for cached NVRAM */
if (!ha->s_dma_pool)
goto fail_free_nvram;
+ ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0022,
+ "init_cb=%p gid_list=%p, srb_mempool=%p s_dma_pool=%p.\n",
+ ha->init_cb, ha->gid_list, ha->srb_mempool, ha->s_dma_pool);
+
if (IS_QLA82XX(ha) || ql2xenabledif) {
ha->dl_dma_pool = dma_pool_create(name, &ha->pdev->dev,
DSD_LIST_DMA_POOL_SIZE, 8, 0);
if (!ha->dl_dma_pool) {
- qla_printk(KERN_WARNING, ha,
- "Memory Allocation failed - dl_dma_pool\n");
+ ql_log_pci(ql_log_fatal, ha->pdev, 0x0023,
+ "Failed to allocate memory for dl_dma_pool.\n");
goto fail_s_dma_pool;
}
ha->fcp_cmnd_dma_pool = dma_pool_create(name, &ha->pdev->dev,
FCP_CMND_DMA_POOL_SIZE, 8, 0);
if (!ha->fcp_cmnd_dma_pool) {
- qla_printk(KERN_WARNING, ha,
- "Memory Allocation failed - fcp_cmnd_dma_pool\n");
+ ql_log_pci(ql_log_fatal, ha->pdev, 0x0024,
+ "Failed to allocate memory for fcp_cmnd_dma_pool.\n");
goto fail_dl_dma_pool;
}
+ ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0025,
+ "dl_dma_pool=%p fcp_cmnd_dma_pool=%p.\n",
+ ha->dl_dma_pool, ha->fcp_cmnd_dma_pool);
}
/* Allocate memory for SNS commands */
sizeof(struct sns_cmd_pkt), &ha->sns_cmd_dma, GFP_KERNEL);
if (!ha->sns_cmd)
goto fail_dma_pool;
+ ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0026,
+ "sns_cmd.\n", ha->sns_cmd);
} else {
/* Get consistent memory allocated for MS IOCB */
ha->ms_iocb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
sizeof(struct ct_sns_pkt), &ha->ct_sns_dma, GFP_KERNEL);
if (!ha->ct_sns)
goto fail_free_ms_iocb;
+ ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0027,
+ "ms_iocb=%p ct_sns=%p.\n",
+ ha->ms_iocb, ha->ct_sns);
}
/* Allocate memory for request ring */
*req = kzalloc(sizeof(struct req_que), GFP_KERNEL);
if (!*req) {
- DEBUG(printk("Unable to allocate memory for req\n"));
+ ql_log_pci(ql_log_fatal, ha->pdev, 0x0028,
+ "Failed to allocate memory for req.\n");
goto fail_req;
}
(*req)->length = req_len;
((*req)->length + 1) * sizeof(request_t),
&(*req)->dma, GFP_KERNEL);
if (!(*req)->ring) {
- DEBUG(printk("Unable to allocate memory for req_ring\n"));
+ ql_log_pci(ql_log_fatal, ha->pdev, 0x0029,
+ "Failed to allocate memory for req_ring.\n");
goto fail_req_ring;
}
/* Allocate memory for response ring */
*rsp = kzalloc(sizeof(struct rsp_que), GFP_KERNEL);
if (!*rsp) {
- qla_printk(KERN_WARNING, ha,
- "Unable to allocate memory for rsp\n");
+ ql_log_pci(ql_log_fatal, ha->pdev, 0x002a,
+ "Failed to allocate memory for rsp.\n");
goto fail_rsp;
}
(*rsp)->hw = ha;
((*rsp)->length + 1) * sizeof(response_t),
&(*rsp)->dma, GFP_KERNEL);
if (!(*rsp)->ring) {
- qla_printk(KERN_WARNING, ha,
- "Unable to allocate memory for rsp_ring\n");
+ ql_log_pci(ql_log_fatal, ha->pdev, 0x002b,
+ "Failed to allocate memory for rsp_ring.\n");
goto fail_rsp_ring;
}
(*req)->rsp = *rsp;
(*rsp)->req = *req;
+ ql_dbg_pci(ql_dbg_init, ha->pdev, 0x002c,
+ "req=%p req->length=%d req->ring=%p rsp=%p "
+ "rsp->length=%d rsp->ring=%p.\n",
+ *req, (*req)->length, (*req)->ring, *rsp, (*rsp)->length,
+ (*rsp)->ring);
/* Allocate memory for NVRAM data for vports */
if (ha->nvram_npiv_size) {
ha->npiv_info = kzalloc(sizeof(struct qla_npiv_entry) *
- ha->nvram_npiv_size, GFP_KERNEL);
+ ha->nvram_npiv_size, GFP_KERNEL);
if (!ha->npiv_info) {
- qla_printk(KERN_WARNING, ha,
- "Unable to allocate memory for npiv info\n");
+ ql_log_pci(ql_log_fatal, ha->pdev, 0x002d,
+ "Failed to allocate memory for npiv_info.\n");
goto fail_npiv_info;
}
} else
&ha->ex_init_cb_dma);
if (!ha->ex_init_cb)
goto fail_ex_init_cb;
+ ql_dbg_pci(ql_dbg_init, ha->pdev, 0x002e,
+ "ex_init_cb=%p.\n", ha->ex_init_cb);
}
INIT_LIST_HEAD(&ha->gbl_dsd_list);
&ha->async_pd_dma);
if (!ha->async_pd)
goto fail_async_pd;
+ ql_dbg_pci(ql_dbg_init, ha->pdev, 0x002f,
+ "async_pd=%p.\n", ha->async_pd);
}
INIT_LIST_HEAD(&ha->vp_list);
ha->init_cb = NULL;
ha->init_cb_dma = 0;
fail:
- DEBUG(printk("%s: Memory allocation failure\n", __func__));
+ ql_log(ql_log_fatal, NULL, 0x0030,
+ "Memory allocation failure.\n");
return -ENOMEM;
}
host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t));
if (host == NULL) {
- printk(KERN_WARNING
- "qla2xxx: Couldn't allocate host from scsi layer!\n");
+ ql_log_pci(ql_log_fatal, ha->pdev, 0x0107,
+ "Failed to allocate host from the scsi layer, aborting.\n");
goto fail;
}
spin_lock_init(&vha->work_lock);
sprintf(vha->host_str, "%s_%ld", QLA2XXX_DRIVER_NAME, vha->host_no);
+ ql_dbg(ql_dbg_init, vha, 0x0041,
+ "Allocated the host=%p hw=%p vha=%p dev_name=%s",
+ vha->host, vha->hw, vha,
+ dev_name(&(ha->pdev->dev)));
+
return vha;
fail:
if (status == QLA_SUCCESS) {
fcport->old_loop_id = fcport->loop_id;
- DEBUG(printk("scsi(%ld): port login OK: logged "
- "in ID 0x%x\n", vha->host_no, fcport->loop_id));
+ ql_dbg(ql_dbg_disc, vha, 0x2003,
+ "Port login OK: logged in ID 0x%x.\n",
+ fcport->loop_id);
qla2x00_update_fcport(vha, fcport);
} else if (status == 1) {
set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
/* retry the login again */
- DEBUG(printk("scsi(%ld): Retrying"
- " %d login again loop_id 0x%x\n",
- vha->host_no, fcport->login_retry,
- fcport->loop_id));
+ ql_dbg(ql_dbg_disc, vha, 0x2007,
+ "Retrying %d login again loop_id 0x%x.\n",
+ fcport->login_retry, fcport->loop_id);
} else {
fcport->login_retry = 0;
}
set_current_state(TASK_INTERRUPTIBLE);
while (!kthread_should_stop()) {
- DEBUG3(printk("qla2x00: DPC handler sleeping\n"));
+ ql_dbg(ql_dbg_dpc, base_vha, 0x4000,
+ "DPC handler sleeping.\n");
schedule();
__set_current_state(TASK_RUNNING);
- DEBUG3(printk("qla2x00: DPC handler waking up\n"));
+ ql_dbg(ql_dbg_dpc, base_vha, 0x4001,
+ "DPC handler waking up.\n");
+ ql_dbg(ql_dbg_dpc, base_vha, 0x4002,
+ "dpc_flags=0x%lx.\n", base_vha->dpc_flags);
/* Initialization not yet finished. Don't do anything yet. */
if (!base_vha->flags.init_done)
continue;
if (ha->flags.eeh_busy) {
- DEBUG17(qla_printk(KERN_WARNING, ha,
- "qla2x00_do_dpc: dpc_flags: %lx\n",
- base_vha->dpc_flags));
+ ql_dbg(ql_dbg_dpc, base_vha, 0x4003,
+ "eeh_busy=%d.\n", ha->flags.eeh_busy);
continue;
}
- DEBUG3(printk("scsi(%ld): DPC handler\n", base_vha->host_no));
-
ha->dpc_active = 1;
if (ha->flags.mbox_busy) {
qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
QLA82XX_DEV_FAILED);
qla82xx_idc_unlock(ha);
- qla_printk(KERN_INFO, ha,
- "HW State: FAILED\n");
+ ql_log(ql_log_info, base_vha, 0x4004,
+ "HW State: FAILED.\n");
qla82xx_device_state_handler(base_vha);
continue;
}
if (test_and_clear_bit(FCOE_CTX_RESET_NEEDED,
&base_vha->dpc_flags)) {
- DEBUG(printk(KERN_INFO
- "scsi(%ld): dpc: sched "
- "qla82xx_fcoe_ctx_reset ha = %p\n",
- base_vha->host_no, ha));
+ ql_dbg(ql_dbg_dpc, base_vha, 0x4005,
+ "FCoE context reset scheduled.\n");
if (!(test_and_set_bit(ABORT_ISP_ACTIVE,
&base_vha->dpc_flags))) {
if (qla82xx_fcoe_ctx_reset(base_vha)) {
&base_vha->dpc_flags);
}
- DEBUG(printk("scsi(%ld): dpc:"
- " qla82xx_fcoe_ctx_reset end\n",
- base_vha->host_no));
+ ql_dbg(ql_dbg_dpc, base_vha, 0x4006,
+ "FCoE context reset end.\n");
}
}
if (test_and_clear_bit(ISP_ABORT_NEEDED,
&base_vha->dpc_flags)) {
- DEBUG(printk("scsi(%ld): dpc: sched "
- "qla2x00_abort_isp ha = %p\n",
- base_vha->host_no, ha));
+ ql_dbg(ql_dbg_dpc, base_vha, 0x4007,
+ "ISP abort scheduled.\n");
if (!(test_and_set_bit(ABORT_ISP_ACTIVE,
&base_vha->dpc_flags))) {
&base_vha->dpc_flags);
}
- DEBUG(printk("scsi(%ld): dpc: qla2x00_abort_isp end\n",
- base_vha->host_no));
+ ql_dbg(ql_dbg_dpc, base_vha, 0x4008,
+ "ISP abort end.\n");
}
if (test_bit(FCPORT_UPDATE_NEEDED, &base_vha->dpc_flags)) {
}
if (test_bit(ISP_QUIESCE_NEEDED, &base_vha->dpc_flags)) {
- DEBUG(printk(KERN_INFO "scsi(%ld): dpc: sched "
- "qla2x00_quiesce_needed ha = %p\n",
- base_vha->host_no, ha));
+ ql_dbg(ql_dbg_dpc, base_vha, 0x4009,
+ "Quiescence mode scheduled.\n");
qla82xx_device_state_handler(base_vha);
clear_bit(ISP_QUIESCE_NEEDED, &base_vha->dpc_flags);
if (!ha->flags.quiesce_owner) {
qla82xx_clear_qsnt_ready(base_vha);
qla82xx_idc_unlock(ha);
}
+ ql_dbg(ql_dbg_dpc, base_vha, 0x400a,
+ "Quiescence mode end.\n");
}
if (test_and_clear_bit(RESET_MARKER_NEEDED,
&base_vha->dpc_flags) &&
(!(test_and_set_bit(RESET_ACTIVE, &base_vha->dpc_flags)))) {
- DEBUG(printk("scsi(%ld): qla2x00_reset_marker()\n",
- base_vha->host_no));
-
+ ql_dbg(ql_dbg_dpc, base_vha, 0x400b,
+ "Reset marker scheduled.\n");
qla2x00_rst_aen(base_vha);
clear_bit(RESET_ACTIVE, &base_vha->dpc_flags);
+ ql_dbg(ql_dbg_dpc, base_vha, 0x400c,
+ "Reset marker end.\n");
}
/* Retry each device up to login retry count */
!test_bit(LOOP_RESYNC_NEEDED, &base_vha->dpc_flags) &&
atomic_read(&base_vha->loop_state) != LOOP_DOWN) {
- DEBUG(printk("scsi(%ld): qla2x00_port_login()\n",
- base_vha->host_no));
+ ql_dbg(ql_dbg_dpc, base_vha, 0x400d,
+ "Relogin scheduled.\n");
qla2x00_relogin(base_vha);
-
- DEBUG(printk("scsi(%ld): qla2x00_port_login - end\n",
- base_vha->host_no));
+ ql_dbg(ql_dbg_dpc, base_vha, 0x400e,
+ "Relogin end.\n");
}
if (test_and_clear_bit(LOOP_RESYNC_NEEDED,
&base_vha->dpc_flags)) {
- DEBUG(printk("scsi(%ld): qla2x00_loop_resync()\n",
- base_vha->host_no));
+ ql_dbg(ql_dbg_dpc, base_vha, 0x400f,
+ "Loop resync scheduled.\n");
if (!(test_and_set_bit(LOOP_RESYNC_ACTIVE,
&base_vha->dpc_flags))) {
&base_vha->dpc_flags);
}
- DEBUG(printk("scsi(%ld): qla2x00_loop_resync - end\n",
- base_vha->host_no));
+ ql_dbg(ql_dbg_dpc, base_vha, 0x4010,
+ "Loop resync end.\n");
}
if (test_bit(NPIV_CONFIG_NEEDED, &base_vha->dpc_flags) &&
} /* End of while(1) */
__set_current_state(TASK_RUNNING);
- DEBUG(printk("scsi(%ld): DPC handler exiting\n", base_vha->host_no));
+ ql_dbg(ql_dbg_dpc, base_vha, 0x4011,
+ "DPC handler exiting.\n");
/*
* Make sure that nobody tries to wake us up again.
qla2x00_sp_compl(struct qla_hw_data *ha, srb_t *sp)
{
if (atomic_read(&sp->ref_count) == 0) {
- DEBUG2(qla_printk(KERN_WARNING, ha,
- "SP reference-count to ZERO -- sp=%p\n", sp));
- DEBUG2(BUG());
+ ql_dbg(ql_dbg_io, sp->fcport->vha, 0x3015,
+ "SP reference-count to ZERO -- sp=%p cmd=%p.\n",
+ sp, sp->cmd);
+ if (ql2xextended_error_logging & ql_dbg_io)
+ BUG();
return;
}
if (!atomic_dec_and_test(&sp->ref_count))
struct req_que *req;
if (ha->flags.eeh_busy) {
+ ql_dbg(ql_dbg_timer, vha, 0x6000,
+ "EEH = %d, restarting timer.\n",
+ ha->flags.eeh_busy);
qla2x00_restart_timer(vha, WATCH_INTERVAL);
return;
}
if (atomic_read(&vha->loop_down_timer) ==
vha->loop_down_abort_time) {
- DEBUG(printk("scsi(%ld): Loop Down - aborting the "
- "queues before time expire\n",
- vha->host_no));
+ ql_log(ql_log_info, vha, 0x6008,
+ "Loop down - aborting the queues before time expires.\n");
if (!IS_QLA2100(ha) && vha->link_down_timeout)
atomic_set(&vha->loop_state, LOOP_DEAD);
/* if the loop has been down for 4 minutes, reinit adapter */
if (atomic_dec_and_test(&vha->loop_down_timer) != 0) {
if (!(vha->device_flags & DFLG_NO_CABLE)) {
- DEBUG(printk("scsi(%ld): Loop down - "
- "aborting ISP.\n",
- vha->host_no));
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x6009,
"Loop down - aborting ISP.\n");
if (IS_QLA82XX(ha))
&vha->dpc_flags);
}
}
- DEBUG3(printk("scsi(%ld): Loop Down - seconds remaining %d\n",
- vha->host_no,
- atomic_read(&vha->loop_down_timer)));
+ ql_dbg(ql_dbg_timer, vha, 0x600a,
+ "Loop down - seconds remaining %d.\n",
+ atomic_read(&vha->loop_down_timer));
}
/* Check if beacon LED needs to be blinked for physical host only */
test_bit(ISP_UNRECOVERABLE, &vha->dpc_flags) ||
test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags) ||
test_bit(VP_DPC_NEEDED, &vha->dpc_flags) ||
- test_bit(RELOGIN_NEEDED, &vha->dpc_flags)))
+ test_bit(RELOGIN_NEEDED, &vha->dpc_flags))) {
+ ql_dbg(ql_dbg_timer, vha, 0x600b,
+ "isp_abort_needed=%d loop_resync_needed=%d "
+ "fcport_update_needed=%d start_dpc=%d "
+ "reset_marker_needed=%d",
+ test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags),
+ test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags),
+ test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags),
+ start_dpc,
+ test_bit(RESET_MARKER_NEEDED, &vha->dpc_flags));
+ ql_dbg(ql_dbg_timer, vha, 0x600c,
+ "beacon_blink_needed=%d isp_unrecoverable=%d "
+ "fcoe_ctx_reset_needed=%d vp_dpc_needed=%d "
+ "relogin_needed=%d.\n",
+ test_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags),
+ test_bit(ISP_UNRECOVERABLE, &vha->dpc_flags),
+ test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags),
+ test_bit(VP_DPC_NEEDED, &vha->dpc_flags),
+ test_bit(RELOGIN_NEEDED, &vha->dpc_flags));
qla2xxx_wake_dpc(vha);
+ }
qla2x00_restart_timer(vha, WATCH_INTERVAL);
}
goto out;
if (request_firmware(&blob->fw, blob->name, &ha->pdev->dev)) {
- DEBUG2(printk("scsi(%ld): Failed to load firmware image "
- "(%s).\n", vha->host_no, blob->name));
+ ql_log(ql_log_warn, vha, 0x0063,
+ "Failed to load firmware image (%s).\n", blob->name);
blob->fw = NULL;
blob = NULL;
goto out;
scsi_qla_host_t *vha = pci_get_drvdata(pdev);
struct qla_hw_data *ha = vha->hw;
- DEBUG2(qla_printk(KERN_WARNING, ha, "error_detected:state %x\n",
- state));
+ ql_dbg(ql_dbg_aer, vha, 0x9000,
+ "PCI error detected, state %x.\n", state);
switch (state) {
case pci_channel_io_normal:
ha->flags.isp82xx_fw_hung = 1;
if (ha->flags.mbox_busy) {
ha->flags.mbox_int = 1;
- DEBUG2(qla_printk(KERN_ERR, ha,
- "Due to pci channel io frozen, doing premature "
- "completion of mbx command\n"));
+ ql_dbg(ql_dbg_aer, vha, 0x9001,
+ "Due to pci channel io frozen, doing premature "
+ "completion of mbx command.\n");
complete(&ha->mbx_intr_comp);
}
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (risc_paused) {
- qla_printk(KERN_INFO, ha, "RISC paused -- mmio_enabled, "
- "Dumping firmware!\n");
+ ql_log(ql_log_info, base_vha, 0x9003,
+ "RISC paused -- mmio_enabled, Dumping firmware.\n");
ha->isp_ops->fw_dump(base_vha, 0);
return PCI_ERS_RESULT_NEED_RESET;
int fn;
struct pci_dev *other_pdev = NULL;
- DEBUG17(qla_printk(KERN_INFO, ha,
- "scsi(%ld): In qla82xx_error_recovery\n", base_vha->host_no));
+ ql_dbg(ql_dbg_aer, base_vha, 0x9006,
+ "Entered %s.\n", __func__);
set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
fn = PCI_FUNC(ha->pdev->devfn);
while (fn > 0) {
fn--;
- DEBUG17(qla_printk(KERN_INFO, ha,
- "Finding pci device at function = 0x%x\n", fn));
+ ql_dbg(ql_dbg_aer, base_vha, 0x9007,
+ "Finding pci device at function = 0x%x.\n", fn);
other_pdev =
pci_get_domain_bus_and_slot(pci_domain_nr(ha->pdev->bus),
ha->pdev->bus->number, PCI_DEVFN(PCI_SLOT(ha->pdev->devfn),
if (!other_pdev)
continue;
if (atomic_read(&other_pdev->enable_cnt)) {
- DEBUG17(qla_printk(KERN_INFO, ha,
- "Found PCI func available and enabled at 0x%x\n",
- fn));
+ ql_dbg(ql_dbg_aer, base_vha, 0x9008,
+ "Found PCI func available and enable at 0x%x.\n",
+ fn);
pci_dev_put(other_pdev);
break;
}
if (!fn) {
/* Reset owner */
- DEBUG17(qla_printk(KERN_INFO, ha,
- "This devfn is reset owner = 0x%x\n", ha->pdev->devfn));
+ ql_dbg(ql_dbg_aer, base_vha, 0x9009,
+ "This devfn is reset owner = 0x%x.\n",
+ ha->pdev->devfn);
qla82xx_idc_lock(ha);
qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
QLA82XX_IDC_VERSION);
drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE);
- DEBUG17(qla_printk(KERN_INFO, ha,
- "drv_active = 0x%x\n", drv_active));
+ ql_dbg(ql_dbg_aer, base_vha, 0x900a,
+ "drv_active = 0x%x.\n", drv_active);
qla82xx_idc_unlock(ha);
/* Reset if device is not already reset
qla82xx_idc_lock(ha);
if (rval != QLA_SUCCESS) {
- qla_printk(KERN_INFO, ha, "HW State: FAILED\n");
+ ql_log(ql_log_info, base_vha, 0x900b,
+ "HW State: FAILED.\n");
qla82xx_clear_drv_active(ha);
qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
QLA82XX_DEV_FAILED);
} else {
- qla_printk(KERN_INFO, ha, "HW State: READY\n");
+ ql_log(ql_log_info, base_vha, 0x900c,
+ "HW State: READY.\n");
qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
QLA82XX_DEV_READY);
qla82xx_idc_unlock(ha);
}
qla82xx_idc_unlock(ha);
} else {
- DEBUG17(qla_printk(KERN_INFO, ha,
- "This devfn is not reset owner = 0x%x\n", ha->pdev->devfn));
+ ql_dbg(ql_dbg_aer, base_vha, 0x900d,
+ "This devfn is not reset owner = 0x%x.\n",
+ ha->pdev->devfn);
if ((qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE) ==
QLA82XX_DEV_READY)) {
ha->flags.isp82xx_fw_hung = 0;
struct rsp_que *rsp;
int rc, retries = 10;
- DEBUG17(qla_printk(KERN_WARNING, ha, "slot_reset\n"));
+ ql_dbg(ql_dbg_aer, base_vha, 0x9004,
+ "Slot Reset.\n");
/* Workaround: qla2xxx driver which access hardware earlier
* needs error state to be pci_channel_io_online.
rc = pci_enable_device(pdev);
if (rc) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, base_vha, 0x9005,
"Can't re-enable PCI device after reset.\n");
goto exit_slot_reset;
}
exit_slot_reset:
- DEBUG17(qla_printk(KERN_WARNING, ha,
- "slot_reset-return:ret=%x\n", ret));
+ ql_dbg(ql_dbg_aer, base_vha, 0x900e,
+ "slot_reset return %x.\n", ret);
return ret;
}
struct qla_hw_data *ha = base_vha->hw;
int ret;
- DEBUG17(qla_printk(KERN_WARNING, ha, "pci_resume\n"));
+ ql_dbg(ql_dbg_aer, base_vha, 0x900f,
+ "pci_resume.\n");
ret = qla2x00_wait_for_hba_online(base_vha);
if (ret != QLA_SUCCESS) {
- qla_printk(KERN_ERR, ha,
- "the device failed to resume I/O "
- "from slot/link_reset");
+ ql_log(ql_log_fatal, base_vha, 0x9002,
+ "The device failed to resume I/O from slot/link_reset.\n");
}
pci_cleanup_aer_uncorrect_error_status(pdev);
srb_cachep = kmem_cache_create("qla2xxx_srbs", sizeof(srb_t), 0,
SLAB_HWCACHE_ALIGN, NULL);
if (srb_cachep == NULL) {
- printk(KERN_ERR
- "qla2xxx: Unable to allocate SRB cache...Failing load!\n");
+ ql_log(ql_log_fatal, NULL, 0x0001,
+ "Unable to allocate SRB cache...Failing load!.\n");
return -ENOMEM;
}
fc_attach_transport(&qla2xxx_transport_functions);
if (!qla2xxx_transport_template) {
kmem_cache_destroy(srb_cachep);
+ ql_log(ql_log_fatal, NULL, 0x0002,
+ "fc_attach_transport failed...Failing load!.\n");
return -ENODEV;
}
apidev_major = register_chrdev(0, QLA2XXX_APIDEV, &apidev_fops);
if (apidev_major < 0) {
- printk(KERN_WARNING "qla2xxx: Unable to register char device "
- "%s\n", QLA2XXX_APIDEV);
+ ql_log(ql_log_fatal, NULL, 0x0003,
+ "Unable to register char device %s.\n", QLA2XXX_APIDEV);
}
qla2xxx_transport_vport_template =
if (!qla2xxx_transport_vport_template) {
kmem_cache_destroy(srb_cachep);
fc_release_transport(qla2xxx_transport_template);
+ ql_log(ql_log_fatal, NULL, 0x0004,
+ "fc_attach_transport vport failed...Failing load!.\n");
return -ENODEV;
}
-
- printk(KERN_INFO "QLogic Fibre Channel HBA Driver: %s\n",
+ ql_log(ql_log_info, NULL, 0x0005,
+ "QLogic Fibre Channel HBA Driver: %s.\n",
qla2x00_version_str);
ret = pci_register_driver(&qla2xxx_pci_driver);
if (ret) {
kmem_cache_destroy(srb_cachep);
fc_release_transport(qla2xxx_transport_template);
fc_release_transport(qla2xxx_transport_vport_template);
+ ql_log(ql_log_fatal, NULL, 0x0006,
+ "pci_register_driver failed...ret=%d Failing load!.\n",
+ ret);
}
return ret;
}
git.openpandora.org / pandora-kernel.git / blobdiff