Merge head 'upstream' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
[pandora-kernel.git] / drivers / scsi / qla2xxx / qla_mbx.c
index eeaec7c..409ea0a 100644 (file)
@@ -2,7 +2,7 @@
  *                  QLOGIC LINUX SOFTWARE
  *
  * QLogic ISP2x00 device driver for Linux 2.6.x
- * Copyright (C) 2003-2004 QLogic Corporation
+ * Copyright (C) 2003-2005 QLogic Corporation
  * (www.qlogic.com)
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -60,7 +60,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
        unsigned long    flags = 0;
        device_reg_t __iomem *reg = ha->iobase;
        struct timer_list       tmp_intr_timer;
-       uint8_t         abort_active = test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
+       uint8_t         abort_active;
        uint8_t         io_lock_on = ha->flags.init_done;
        uint16_t        command;
        uint16_t        *iptr;
@@ -71,19 +71,20 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
        unsigned long   wait_time;
 
        rval = QLA_SUCCESS;
+       abort_active = test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
+
+       DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
 
-       DEBUG11(printk("qla2x00_mailbox_command(%ld): entered.\n",
-           ha->host_no);)
        /*
-        * Wait for active mailbox commands to finish by waiting at most
-        * tov seconds. This is to serialize actual issuing of mailbox cmds
-        * during non ISP abort time.
+        * Wait for active mailbox commands to finish by waiting at most tov
+        * seconds. This is to serialize actual issuing of mailbox cmds during
+        * non ISP abort time.
         */
        if (!abort_active) {
                if (qla2x00_down_timeout(&ha->mbx_cmd_sem, mcp->tov * HZ)) {
                        /* Timeout occurred. Return error. */
-                       DEBUG2_3_11(printk("qla2x00_mailbox_command(%ld): cmd "
-                           "access timeout. Exiting.\n", ha->host_no);)
+                       DEBUG2_3_11(printk("%s(%ld): cmd access timeout. "
+                           "Exiting.\n", __func__, ha->host_no);)
                        return QLA_FUNCTION_TIMEOUT;
                }
        }
@@ -96,13 +97,16 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
        if (!abort_active)
                spin_lock_irqsave(&ha->mbx_reg_lock, mbx_flags);
 
-       DEBUG11(printk("scsi%d: prepare to issue mbox cmd=0x%x.\n",
-           (int)ha->host_no, mcp->mb[0]);)
+       DEBUG11(printk("scsi(%ld): prepare to issue mbox cmd=0x%x.\n",
+           ha->host_no, mcp->mb[0]);)
 
        spin_lock_irqsave(&ha->hardware_lock, flags);
 
        /* Load mailbox registers. */
-       optr = (uint16_t __iomem *)MAILBOX_REG(ha, reg, 0);
+       if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
+               optr = (uint16_t __iomem *)&reg->isp24.mailbox0;
+       else
+               optr = (uint16_t __iomem *)MAILBOX_REG(ha, &reg->isp, 0);
 
        iptr = mcp->mb;
        command = mcp->mb[0];
@@ -110,7 +114,8 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
 
        for (cnt = 0; cnt < ha->mbx_count; cnt++) {
                if (IS_QLA2200(ha) && cnt == 8)
-                       optr = (uint16_t __iomem *)MAILBOX_REG(ha, reg, 8);
+                       optr =
+                           (uint16_t __iomem *)MAILBOX_REG(ha, &reg->isp, 8);
                if (mboxes & BIT_0)
                        WRT_REG_WORD(optr, *iptr);
 
@@ -120,16 +125,15 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
        }
 
 #if defined(QL_DEBUG_LEVEL_1)
-       printk("qla2x00_mailbox_command: Loaded MBX registers "
-           "(displayed in bytes) = \n");
+       printk("%s(%ld): Loaded MBX registers (displayed in bytes) = \n",
+           __func__, ha->host_no);
        qla2x00_dump_buffer((uint8_t *)mcp->mb, 16);
        printk("\n");
        qla2x00_dump_buffer(((uint8_t *)mcp->mb + 0x10), 16);
        printk("\n");
        qla2x00_dump_buffer(((uint8_t *)mcp->mb + 0x20), 8);
        printk("\n");
-       printk("qla2x00_mailbox_command: I/O address = %lx.\n",
-           (u_long)optr);
+       printk("%s(%ld): I/O address = %p.\n", __func__, ha->host_no, optr);
        qla2x00_dump_regs(ha);
 #endif
 
@@ -138,17 +142,15 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
        clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
 
        /* Unlock mbx registers and wait for interrupt */
-
-       DEBUG11(printk("qla2x00_mailbox_command: going to unlock irq & "
-           "waiting for interrupt. jiffies=%lx.\n", jiffies);)
+       DEBUG11(printk("%s(%ld): going to unlock irq & waiting for interrupt. "
+           "jiffies=%lx.\n", __func__, ha->host_no, jiffies);)
 
        /* Wait for mbx cmd completion until timeout */
 
        if (!abort_active && io_lock_on) {
                /* sleep on completion semaphore */
-               DEBUG11(printk("qla2x00_mailbox_command(%ld): "
-                   "INTERRUPT MODE. Initializing timer.\n",
-                   ha->host_no);)
+               DEBUG11(printk("%s(%ld): INTERRUPT MODE. Initializing timer.\n",
+                   __func__, ha->host_no);)
 
                init_timer(&tmp_intr_timer);
                tmp_intr_timer.data = (unsigned long)&ha->mbx_intr_sem;
@@ -156,16 +158,19 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
                tmp_intr_timer.function =
                    (void (*)(unsigned long))qla2x00_mbx_sem_timeout;
 
-               DEBUG11(printk("qla2x00_mailbox_command(%ld): "
-                   "Adding timer.\n", ha->host_no);)
+               DEBUG11(printk("%s(%ld): Adding timer.\n", __func__,
+                   ha->host_no);)
                add_timer(&tmp_intr_timer);
 
-               DEBUG11(printk("qla2x00_mailbox_command: going to "
-                   "unlock & sleep. time=0x%lx.\n", jiffies);)
+               DEBUG11(printk("%s(%ld): going to unlock & sleep. "
+                   "time=0x%lx.\n", __func__, ha->host_no, jiffies);)
 
                set_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags);
 
-               WRT_REG_WORD(&reg->hccr, HCCR_SET_HOST_INT);
+               if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
+                       WRT_REG_DWORD(&reg->isp24.hccr, HCCRX_SET_HOST_INT);
+               else
+                       WRT_REG_WORD(&reg->isp.hccr, HCCR_SET_HOST_INT);
                spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
                if (!abort_active)
@@ -176,19 +181,20 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
                 */
                down(&ha->mbx_intr_sem);
 
-               DEBUG11(printk("qla2x00_mailbox_command:"
-                   "waking up."
-                   "time=0x%lx\n", jiffies);)
+               DEBUG11(printk("%s(%ld): waking up. time=0x%lx\n", __func__,
+                   ha->host_no, jiffies);)
                clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags);
 
                /* delete the timer */
                del_timer(&tmp_intr_timer);
        } else {
+               DEBUG3_11(printk("%s(%ld): cmd=%x POLLING MODE.\n", __func__,
+                   ha->host_no, command);)
 
-               DEBUG3_11(printk("qla2x00_mailbox_command(%ld): cmd=%x "
-                       "POLLING MODE.\n", ha->host_no, command);)
-
-               WRT_REG_WORD(&reg->hccr, HCCR_SET_HOST_INT);
+               if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
+                       WRT_REG_DWORD(&reg->isp24.hccr, HCCRX_SET_HOST_INT);
+               else
+                       WRT_REG_WORD(&reg->isp.hccr, HCCR_SET_HOST_INT);
                spin_unlock_irqrestore(&ha->hardware_lock, flags);
                if (!abort_active)
                        spin_unlock_irqrestore(&ha->mbx_reg_lock, mbx_flags);
@@ -212,8 +218,8 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
        if (ha->flags.mbox_int) {
                uint16_t *iptr2;
 
-               DEBUG3_11(printk("qla2x00_mailbox_cmd: cmd %x completed.\n",
-                   command);)
+               DEBUG3_11(printk("%s(%ld): cmd %x completed.\n", __func__,
+                   ha->host_no, command);)
 
                /* Got interrupt. Clear the flag. */
                ha->flags.mbox_int = 0;
@@ -238,12 +244,22 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
 
 #if defined(QL_DEBUG_LEVEL_2) || defined(QL_DEBUG_LEVEL_3) || \
                defined(QL_DEBUG_LEVEL_11)
-               printk("qla2x00_mailbox_command(%ld): **** MB Command Timeout "
-                   "for cmd %x ****\n", ha->host_no, command);
-               printk("qla2x00_mailbox_command: icontrol=%x jiffies=%lx\n",
-                   RD_REG_WORD(&reg->ictrl), jiffies);
-               printk("qla2x00_mailbox_command: *** mailbox[0] = 0x%x ***\n",
-                   RD_REG_WORD(optr));
+               uint16_t mb0;
+               uint32_t ictrl;
+
+               if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+                       mb0 = RD_REG_WORD(&reg->isp24.mailbox0);
+                       ictrl = RD_REG_DWORD(&reg->isp24.ictrl);
+               } else {
+                       mb0 = RD_MAILBOX_REG(ha, reg->isp, 0);
+                       ictrl = RD_REG_WORD(&reg->isp.ictrl);
+               }
+               printk("%s(%ld): **** MB Command Timeout for cmd %x ****\n",
+                   __func__, ha->host_no, command);
+               printk("%s(%ld): icontrol=%x jiffies=%lx\n", __func__,
+                   ha->host_no, ictrl, jiffies);
+               printk("%s(%ld): *** mailbox[0] = 0x%x ***\n", __func__,
+                   ha->host_no, mb0);
                qla2x00_dump_regs(ha);
 #endif
 
@@ -259,36 +275,34 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
        ha->mcp = NULL;
 
        if (!abort_active) {
-               DEBUG11(printk("qla2x00_mailbox_cmd: checking for additional "
-                   "resp interrupt.\n");)
+               DEBUG11(printk("%s(%ld): checking for additional resp "
+                   "interrupt.\n", __func__, ha->host_no);)
 
                /* polling mode for non isp_abort commands. */
                qla2x00_poll(ha);
        }
 
-       if (rval == QLA_FUNCTION_TIMEOUT) {
+       if (rval == QLA_FUNCTION_TIMEOUT &&
+           mcp->mb[0] != MBC_GEN_SYSTEM_ERROR) {
                if (!io_lock_on || (mcp->flags & IOCTL_CMD)) {
                        /* not in dpc. schedule it for dpc to take over. */
-                       DEBUG(printk("qla2x00_mailbox_command(%ld): timeout "
-                           "schedule isp_abort_needed.\n",
-                           ha->host_no);)
-                       DEBUG2_3_11(printk("qla2x00_mailbox_command(%ld): "
-                           "timeout schedule isp_abort_needed.\n",
-                           ha->host_no);)
+                       DEBUG(printk("%s(%ld): timeout schedule "
+                           "isp_abort_needed.\n", __func__, ha->host_no);)
+                       DEBUG2_3_11(printk("%s(%ld): timeout schedule "
+                           "isp_abort_needed.\n", __func__, ha->host_no);)
                        qla_printk(KERN_WARNING, ha,
                            "Mailbox command timeout occured. Scheduling ISP "
                            "abort.\n");
                        set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
-                       if (ha->dpc_wait && !ha->dpc_active) 
+                       if (ha->dpc_wait && !ha->dpc_active)
                                up(ha->dpc_wait);
 
                } else if (!abort_active) {
-
                        /* call abort directly since we are in the DPC thread */
-                       DEBUG(printk("qla2x00_mailbox_command(%ld): timeout "
-                           "calling abort_isp\n", ha->host_no);)
-                       DEBUG2_3_11(printk("qla2x00_mailbox_command(%ld): "
-                           "timeout calling abort_isp\n", ha->host_no);)
+                       DEBUG(printk("%s(%ld): timeout calling abort_isp\n",
+                           __func__, ha->host_no);)
+                       DEBUG2_3_11(printk("%s(%ld): timeout calling "
+                           "abort_isp\n", __func__, ha->host_no);)
                        qla_printk(KERN_WARNING, ha,
                            "Mailbox command timeout occured. Issuing ISP "
                            "abort.\n");
@@ -296,15 +310,14 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
                        set_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
                        clear_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
                        if (qla2x00_abort_isp(ha)) {
-                               /* failed. retry later. */
+                               /* Failed. retry later. */
                                set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
                        }
                        clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
-
-                       DEBUG(printk("qla2x00_mailbox_command: finished "
-                           "abort_isp\n");)
-                       DEBUG2_3_11(printk("qla2x00_mailbox_command: finished "
-                           "abort_isp\n");)
+                       DEBUG(printk("%s(%ld): finished abort_isp\n", __func__,
+                           ha->host_no);)
+                       DEBUG2_3_11(printk("%s(%ld): finished abort_isp\n",
+                           __func__, ha->host_no);)
                }
        }
 
@@ -313,17 +326,13 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
                up(&ha->mbx_cmd_sem);
 
        if (rval) {
-               DEBUG2_3_11(printk("qla2x00_mailbox_command(%ld): **** FAILED. "
-                   "mbx0=%x, mbx1=%x, mbx2=%x, cmd=%x ****\n",
-               ha->host_no, mcp->mb[0], mcp->mb[1], mcp->mb[2], command);)
+               DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, "
+                   "mbx2=%x, cmd=%x ****\n", __func__, ha->host_no,
+                   mcp->mb[0], mcp->mb[1], mcp->mb[2], command);)
        } else {
-               DEBUG11(printk("qla2x00_mailbox_command(%ld): done.\n",
-                   ha->host_no);)
+               DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);)
        }
 
-       DEBUG11(printk("qla2x00_mailbox_command(%ld): exiting.\n",
-           ha->host_no);)
-
        return rval;
 }
 
@@ -418,64 +427,40 @@ qla2x00_load_ram(scsi_qla_host_t *ha, dma_addr_t req_dma, uint16_t risc_addr,
  */
 int
 qla2x00_load_ram_ext(scsi_qla_host_t *ha, dma_addr_t req_dma,
-    uint32_t risc_addr, uint16_t risc_code_size)
+    uint32_t risc_addr, uint32_t risc_code_size)
 {
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;
-       uint32_t        req_len;
-       dma_addr_t      nml_dma;
-       uint32_t        nml_len;
-       uint32_t        normalized;
 
        DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
 
-       req_len = risc_code_size;
-       nml_dma = 0;
-       nml_len = 0;
-
-       normalized = qla2x00_normalize_dma_addr(&req_dma, &req_len, &nml_dma,
-           &nml_len);
-
-       /* Load first segment */
        mcp->mb[0] = MBC_LOAD_RISC_RAM_EXTENDED;
        mcp->mb[1] = LSW(risc_addr);
        mcp->mb[2] = MSW(req_dma);
        mcp->mb[3] = LSW(req_dma);
-       mcp->mb[4] = (uint16_t)req_len;
        mcp->mb[6] = MSW(MSD(req_dma));
        mcp->mb[7] = LSW(MSD(req_dma));
        mcp->mb[8] = MSW(risc_addr);
-       mcp->out_mb = MBX_8|MBX_7|MBX_6|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+       mcp->out_mb = MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+       if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+               mcp->mb[4] = MSW(risc_code_size);
+               mcp->mb[5] = LSW(risc_code_size);
+               mcp->out_mb |= MBX_5|MBX_4;
+       } else {
+               mcp->mb[4] = LSW(risc_code_size);
+               mcp->out_mb |= MBX_4;
+       }
+
        mcp->in_mb = MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);
 
-       /* Load second segment - if necessary */
-       if (normalized && (rval == QLA_SUCCESS)) {
-               risc_addr += req_len;
-               mcp->mb[0] = MBC_LOAD_RISC_RAM_EXTENDED;
-               mcp->mb[1] = LSW(risc_addr);
-               mcp->mb[2] = MSW(nml_dma);
-               mcp->mb[3] = LSW(nml_dma);
-               mcp->mb[4] = (uint16_t)nml_len;
-               mcp->mb[6] = MSW(MSD(nml_dma));
-               mcp->mb[7] = LSW(MSD(nml_dma));
-               mcp->mb[8] = MSW(risc_addr);
-               mcp->out_mb = MBX_8|MBX_7|MBX_6|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
-               mcp->in_mb = MBX_0;
-               mcp->tov = 30;
-               mcp->flags = 0;
-               rval = qla2x00_mailbox_command(ha, mcp);
-       }
-
        if (rval != QLA_SUCCESS) {
-               /*EMPTY*/
-               DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n",
-                   __func__, ha->host_no, rval, mcp->mb[0]));
+               DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__,
+                   ha->host_no, rval, mcp->mb[0]));
        } else {
-               /*EMPTY*/
                DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
        }
 
@@ -484,42 +469,62 @@ qla2x00_load_ram_ext(scsi_qla_host_t *ha, dma_addr_t req_dma,
 
 /*
  * qla2x00_execute_fw
- *     Start adapter firmware.
+ *     Start adapter firmware.
  *
  * Input:
- *     ha = adapter block pointer.
- *     TARGET_QUEUE_LOCK must be released.
- *     ADAPTER_STATE_LOCK must be released.
+ *     ha = adapter block pointer.
+ *     TARGET_QUEUE_LOCK must be released.
+ *     ADAPTER_STATE_LOCK must be released.
  *
  * Returns:
- *     qla2x00 local function return status code.
+ *     qla2x00 local function return status code.
  *
  * Context:
- *     Kernel context.
+ *     Kernel context.
  */
 int
-qla2x00_execute_fw(scsi_qla_host_t *ha)
+qla2x00_execute_fw(scsi_qla_host_t *ha, uint32_t risc_addr)
 {
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;
 
-       DEBUG11(printk("qla2x00_execute_fw(%ld): entered.\n", ha->host_no);)
+       DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
 
        mcp->mb[0] = MBC_EXECUTE_FIRMWARE;
-       mcp->mb[1] = *ha->brd_info->fw_info[0].fwstart;
-       mcp->out_mb = MBX_1|MBX_0;
-       if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
-               mcp->mb[2] = 0;
-               mcp->out_mb |= MBX_2;
+       mcp->out_mb = MBX_0;
+       mcp->in_mb = MBX_0;
+       if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+               mcp->mb[1] = MSW(risc_addr);
+               mcp->mb[2] = LSW(risc_addr);
+               mcp->mb[3] = 0;
+               mcp->out_mb |= MBX_3|MBX_2|MBX_1;
+               mcp->in_mb |= MBX_1;
+       } else {
+               mcp->mb[1] = LSW(risc_addr);
+               mcp->out_mb |= MBX_1;
+               if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
+                       mcp->mb[2] = 0;
+                       mcp->out_mb |= MBX_2;
+               }
        }
 
-       mcp->in_mb = MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);
 
-       DEBUG11(printk("qla2x00_execute_fw(%ld): done.\n", ha->host_no);)
+       if (rval != QLA_SUCCESS) {
+               DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__,
+                   ha->host_no, rval, mcp->mb[0]));
+       } else {
+               if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+                       DEBUG11(printk("%s(%ld): done exchanges=%x.\n",
+                           __func__, ha->host_no, mcp->mb[1]);)
+               } else {
+                       DEBUG11(printk("%s(%ld): done.\n", __func__,
+                           ha->host_no);)
+               }
+       }
 
        return rval;
 }
@@ -612,6 +617,7 @@ qla2x00_get_fw_options(scsi_qla_host_t *ha, uint16_t *fwopts)
                DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
                    ha->host_no, rval));
        } else {
+               fwopts[0] = mcp->mb[0];
                fwopts[1] = mcp->mb[1];
                fwopts[2] = mcp->mb[2];
                fwopts[3] = mcp->mb[3];
@@ -650,19 +656,26 @@ qla2x00_set_fw_options(scsi_qla_host_t *ha, uint16_t *fwopts)
        mcp->mb[1] = fwopts[1];
        mcp->mb[2] = fwopts[2];
        mcp->mb[3] = fwopts[3];
-       mcp->mb[10] = fwopts[10];
-       mcp->mb[11] = fwopts[11];
-       mcp->mb[12] = 0;        /* Undocumented, but used */
-       mcp->out_mb = MBX_12|MBX_11|MBX_10|MBX_3|MBX_2|MBX_1|MBX_0;
+       mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_0;
+       if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+               mcp->in_mb |= MBX_1;
+       } else {
+               mcp->mb[10] = fwopts[10];
+               mcp->mb[11] = fwopts[11];
+               mcp->mb[12] = 0;        /* Undocumented, but used */
+               mcp->out_mb |= MBX_12|MBX_11|MBX_10;
+       }
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);
 
+       fwopts[0] = mcp->mb[0];
+
        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
-               DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
-                   ha->host_no, rval));
+               DEBUG2_3_11(printk("%s(%ld): failed=%x (%x/%x).\n", __func__,
+                   ha->host_no, rval, mcp->mb[0], mcp->mb[1]));
        } else {
                /*EMPTY*/
                DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
@@ -747,31 +760,38 @@ qla2x00_mbx_reg_test(scsi_qla_host_t *ha)
  *     Kernel context.
  */
 int
-qla2x00_verify_checksum(scsi_qla_host_t *ha)
+qla2x00_verify_checksum(scsi_qla_host_t *ha, uint32_t risc_addr)
 {
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;
 
-       DEBUG11(printk("qla2x00_verify_checksum(%ld): entered.\n",
-           ha->host_no);)
+       DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
 
        mcp->mb[0] = MBC_VERIFY_CHECKSUM;
-       mcp->mb[1] = *ha->brd_info->fw_info[0].fwstart;
-       mcp->out_mb = MBX_1|MBX_0;
-       mcp->in_mb = MBX_2|MBX_0;
+       mcp->out_mb = MBX_0;
+       mcp->in_mb = MBX_0;
+       if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+               mcp->mb[1] = MSW(risc_addr);
+               mcp->mb[2] = LSW(risc_addr);
+               mcp->out_mb |= MBX_2|MBX_1;
+               mcp->in_mb |= MBX_2|MBX_1;
+       } else {
+               mcp->mb[1] = LSW(risc_addr);
+               mcp->out_mb |= MBX_1;
+               mcp->in_mb |= MBX_1;
+       }
+
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);
 
        if (rval != QLA_SUCCESS) {
-               /*EMPTY*/
-               DEBUG2_3_11(printk("qla2x00_verify_checksum(%ld): failed=%x.\n",
-                   ha->host_no, rval);)
+               DEBUG2_3_11(printk("%s(%ld): failed=%x chk sum=%x.\n", __func__,
+                   ha->host_no, rval, (IS_QLA24XX(ha) || IS_QLA25XX(ha) ?
+                   (mcp->mb[2] << 16) | mcp->mb[1]: mcp->mb[1]));)
        } else {
-               /*EMPTY*/
-               DEBUG11(printk("qla2x00_verify_checksum(%ld): done.\n",
-                   ha->host_no);)
+               DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);)
        }
 
        return rval;
@@ -817,12 +837,16 @@ qla2x00_issue_iocb(scsi_qla_host_t *ha, void*  buffer, dma_addr_t phys_addr,
 
        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
-               DEBUG(printk("qla2x00_issue_iocb(%ld): failed rval 0x%x",
-                   ha->host_no,rval);)
-               DEBUG2(printk("qla2x00_issue_iocb(%ld): failed rval 0x%x",
-                   ha->host_no,rval);)
+               DEBUG(printk("qla2x00_issue_iocb(%ld): failed rval 0x%x\n",
+                   ha->host_no, rval);)
+               DEBUG2(printk("qla2x00_issue_iocb(%ld): failed rval 0x%x\n",
+                   ha->host_no, rval);)
        } else {
-               /*EMPTY*/
+               sts_entry_t *sts_entry = (sts_entry_t *) buffer;
+
+               /* Mask reserved bits. */
+               sts_entry->entry_status &=
+                   IS_QLA24XX(ha) || IS_QLA25XX(ha) ? RF_MASK_24XX :RF_MASK;
        }
 
        return rval;
@@ -918,41 +942,40 @@ qla2x00_abort_target(fc_port_t *fcport)
        int        rval;
        mbx_cmd_t  mc;
        mbx_cmd_t  *mcp = &mc;
+       scsi_qla_host_t *ha;
 
-       DEBUG11(printk("qla2x00_abort_target(%ld): entered.\n",
-           fcport->ha->host_no);)
-
-       if (fcport == NULL) {
-               /* no target to abort */
+       if (fcport == NULL)
                return 0;
-       }
 
+       DEBUG11(printk("%s(%ld): entered.\n", __func__, fcport->ha->host_no);)
+
+       ha = fcport->ha;
        mcp->mb[0] = MBC_ABORT_TARGET;
        mcp->out_mb = MBX_2|MBX_1|MBX_0;
-       if (HAS_EXTENDED_IDS(fcport->ha)) {
+       if (HAS_EXTENDED_IDS(ha)) {
                mcp->mb[1] = fcport->loop_id;
                mcp->mb[10] = 0;
                mcp->out_mb |= MBX_10;
        } else {
                mcp->mb[1] = fcport->loop_id << 8;
        }
-       mcp->mb[2] = fcport->ha->loop_reset_delay;
+       mcp->mb[2] = ha->loop_reset_delay;
 
        mcp->in_mb = MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
-       rval = qla2x00_mailbox_command(fcport->ha, mcp);
+       rval = qla2x00_mailbox_command(ha, mcp);
 
        /* Issue marker command. */
-       fcport->ha->marker_needed = 1;
+       ha->marker_needed = 1;
 
        if (rval != QLA_SUCCESS) {
                DEBUG2_3_11(printk("qla2x00_abort_target(%ld): failed=%x.\n",
-                   fcport->ha->host_no, rval);)
+                   ha->host_no, rval);)
        } else {
                /*EMPTY*/
                DEBUG11(printk("qla2x00_abort_target(%ld): done.\n",
-                   fcport->ha->host_no);)
+                   ha->host_no);)
        }
 
        return rval;
@@ -1202,82 +1225,117 @@ qla2x00_get_port_database(scsi_qla_host_t *ha, fc_port_t *fcport, uint8_t opt)
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;
        port_database_t *pd;
+       struct port_database_24xx *pd24;
        dma_addr_t pd_dma;
 
-       DEBUG11(printk("qla2x00_get_port_database(%ld): entered.\n",
-           ha->host_no);)
+       DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
 
-       pd = dma_pool_alloc(ha->s_dma_pool, GFP_ATOMIC, &pd_dma);
+       pd24 = NULL;
+       pd = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &pd_dma);
        if (pd  == NULL) {
-               DEBUG2_3_11(printk("qla2x00_get_port_database(%ld): **** "
-                   "Mem Alloc Failed ****", ha->host_no);)
+               DEBUG2_3(printk("%s(%ld): failed to allocate Port Database "
+                   "structure.\n", __func__, ha->host_no));
                return QLA_MEMORY_ALLOC_FAILED;
        }
-       memset(pd, 0, PORT_DATABASE_SIZE);
+       memset(pd, 0, max(PORT_DATABASE_SIZE, PORT_DATABASE_24XX_SIZE));
 
-       if (opt != 0)
+       mcp->mb[0] = MBC_GET_PORT_DATABASE;
+       if (opt != 0 && !IS_QLA24XX(ha) && !IS_QLA25XX(ha))
                mcp->mb[0] = MBC_ENHANCED_GET_PORT_DATABASE;
-       else
-               mcp->mb[0] = MBC_GET_PORT_DATABASE;
-       mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
-       if (HAS_EXTENDED_IDS(ha)) {
-               mcp->mb[1] = fcport->loop_id;
-               mcp->mb[10] = opt;
-               mcp->out_mb |= MBX_10;
-       } else {
-               mcp->mb[1] = fcport->loop_id << 8 | opt;
-       }
        mcp->mb[2] = MSW(pd_dma);
        mcp->mb[3] = LSW(pd_dma);
        mcp->mb[6] = MSW(MSD(pd_dma));
        mcp->mb[7] = LSW(MSD(pd_dma));
-
+       mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_0;
        mcp->in_mb = MBX_0;
-       mcp->buf_size = PORT_DATABASE_SIZE;
+       if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+               mcp->mb[1] = fcport->loop_id;
+               mcp->mb[10] = opt;
+               mcp->out_mb |= MBX_10|MBX_1;
+               mcp->in_mb |= MBX_1;
+       } else if (HAS_EXTENDED_IDS(ha)) {
+               mcp->mb[1] = fcport->loop_id;
+               mcp->mb[10] = opt;
+               mcp->out_mb |= MBX_10|MBX_1;
+       } else {
+               mcp->mb[1] = fcport->loop_id << 8 | opt;
+               mcp->out_mb |= MBX_1;
+       }
+       mcp->buf_size = (IS_QLA24XX(ha) || IS_QLA25XX(ha) ?
+           PORT_DATABASE_24XX_SIZE : PORT_DATABASE_SIZE);
        mcp->flags = MBX_DMA_IN;
        mcp->tov = (ha->login_timeout * 2) + (ha->login_timeout / 2);
        rval = qla2x00_mailbox_command(ha, mcp);
        if (rval != QLA_SUCCESS)
                goto gpd_error_out;
 
-       /* Check for logged in state. */
-       if (pd->master_state != PD_STATE_PORT_LOGGED_IN &&
-           pd->slave_state != PD_STATE_PORT_LOGGED_IN) {
-               rval = QLA_FUNCTION_FAILED;
-               goto gpd_error_out;
-       }
-
-       /* Names are little-endian. */
-       memcpy(fcport->node_name, pd->node_name, WWN_SIZE);
-       memcpy(fcport->port_name, pd->port_name, WWN_SIZE);
-
-       /* Get port_id of device. */
-       fcport->d_id.b.al_pa = pd->port_id[2];
-       fcport->d_id.b.area = pd->port_id[3];
-       fcport->d_id.b.domain = pd->port_id[0];
-       fcport->d_id.b.rsvd_1 = 0;
+       if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+               pd24 = (struct port_database_24xx *) pd;
+
+               /* Check for logged in state. */
+               if (pd24->current_login_state != PDS_PRLI_COMPLETE &&
+                   pd24->last_login_state != PDS_PRLI_COMPLETE) {
+                       DEBUG2(printk("%s(%ld): Unable to verify "
+                           "login-state (%x/%x) for loop_id %x\n",
+                           __func__, ha->host_no,
+                           pd24->current_login_state,
+                           pd24->last_login_state, fcport->loop_id));
+                       rval = QLA_FUNCTION_FAILED;
+                       goto gpd_error_out;
+               }
 
-       /* Check for device require authentication. */
-       pd->common_features & BIT_5 ? (fcport->flags |= FCF_AUTH_REQ) :
-           (fcport->flags &= ~FCF_AUTH_REQ);
+               /* Names are little-endian. */
+               memcpy(fcport->node_name, pd24->node_name, WWN_SIZE);
+               memcpy(fcport->port_name, pd24->port_name, WWN_SIZE);
+
+               /* Get port_id of device. */
+               fcport->d_id.b.domain = pd24->port_id[0];
+               fcport->d_id.b.area = pd24->port_id[1];
+               fcport->d_id.b.al_pa = pd24->port_id[2];
+               fcport->d_id.b.rsvd_1 = 0;
+
+               /* If not target must be initiator or unknown type. */
+               if ((pd24->prli_svc_param_word_3[0] & BIT_4) == 0)
+                       fcport->port_type = FCT_INITIATOR;
+               else
+                       fcport->port_type = FCT_TARGET;
+       } else {
+               /* Check for logged in state. */
+               if (pd->master_state != PD_STATE_PORT_LOGGED_IN &&
+                   pd->slave_state != PD_STATE_PORT_LOGGED_IN) {
+                       rval = QLA_FUNCTION_FAILED;
+                       goto gpd_error_out;
+               }
 
-       /* If not target must be initiator or unknown type. */
-       if ((pd->prli_svc_param_word_3[0] & BIT_4) == 0)
-               fcport->port_type = FCT_INITIATOR;
-       else
-               fcport->port_type = FCT_TARGET;
+               /* Names are little-endian. */
+               memcpy(fcport->node_name, pd->node_name, WWN_SIZE);
+               memcpy(fcport->port_name, pd->port_name, WWN_SIZE);
+
+               /* Get port_id of device. */
+               fcport->d_id.b.domain = pd->port_id[0];
+               fcport->d_id.b.area = pd->port_id[3];
+               fcport->d_id.b.al_pa = pd->port_id[2];
+               fcport->d_id.b.rsvd_1 = 0;
+
+               /* Check for device require authentication. */
+               pd->common_features & BIT_5 ? (fcport->flags |= FCF_AUTH_REQ) :
+                   (fcport->flags &= ~FCF_AUTH_REQ);
+
+               /* If not target must be initiator or unknown type. */
+               if ((pd->prli_svc_param_word_3[0] & BIT_4) == 0)
+                       fcport->port_type = FCT_INITIATOR;
+               else
+                       fcport->port_type = FCT_TARGET;
+       }
 
 gpd_error_out:
        dma_pool_free(ha->s_dma_pool, pd, pd_dma);
 
        if (rval != QLA_SUCCESS) {
-               /*EMPTY*/
-               DEBUG2_3_11(printk("qla2x00_get_port_database(%ld): "
-                   "failed=%x.\n", ha->host_no, rval);)
+               DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
+                   __func__, ha->host_no, rval, mcp->mb[0], mcp->mb[1]));
        } else {
-               /*EMPTY*/
-               DEBUG11(printk("qla2x00_get_port_database(%ld): done.\n",
-                   ha->host_no);)
+               DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
        }
 
        return rval;
@@ -1422,21 +1480,27 @@ qla2x00_lip_reset(scsi_qla_host_t *ha)
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;
 
-       DEBUG11(printk("qla2x00_lip_reset(%ld): entered.\n",
-           ha->host_no);)
+       DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
 
-       mcp->mb[0] = MBC_LIP_RESET;
-       mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
-       if (HAS_EXTENDED_IDS(ha)) {
-               mcp->mb[1] = 0x00ff;
-               mcp->mb[10] = 0;
-               mcp->out_mb |= MBX_10;
+       if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+               mcp->mb[0] = MBC_LIP_FULL_LOGIN;
+               mcp->mb[1] = BIT_0;
+               mcp->mb[2] = 0xff;
+               mcp->mb[3] = 0;
+               mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
        } else {
-               mcp->mb[1] = 0xff00;
+               mcp->mb[0] = MBC_LIP_RESET;
+               mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
+               if (HAS_EXTENDED_IDS(ha)) {
+                       mcp->mb[1] = 0x00ff;
+                       mcp->mb[10] = 0;
+                       mcp->out_mb |= MBX_10;
+               } else {
+                       mcp->mb[1] = 0xff00;
+               }
+               mcp->mb[2] = ha->loop_reset_delay;
+               mcp->mb[3] = 0;
        }
-       mcp->mb[2] = ha->loop_reset_delay;
-       mcp->mb[3] = 0;
-
        mcp->in_mb = MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
@@ -1444,11 +1508,11 @@ qla2x00_lip_reset(scsi_qla_host_t *ha)
 
        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
-               DEBUG2_3_11(printk("qla2x00_lip_reset(%ld): failed=%x.\n",
-                   ha->host_no, rval);)
+               DEBUG2_3_11(printk("%s(%ld): failed=%x.\n",
+                   __func__, ha->host_no, rval);)
        } else {
                /*EMPTY*/
-               DEBUG11(printk("qla2x00_lip_reset(%ld): done.\n", ha->host_no);)
+               DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);)
        }
 
        return rval;
@@ -1513,6 +1577,97 @@ qla2x00_send_sns(scsi_qla_host_t *ha, dma_addr_t sns_phys_address,
        return rval;
 }
 
+int
+qla24xx_login_fabric(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain,
+    uint8_t area, uint8_t al_pa, uint16_t *mb, uint8_t opt)
+{
+       int             rval;
+
+       struct logio_entry_24xx *lg;
+       dma_addr_t      lg_dma;
+       uint32_t        iop[2];
+
+       DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
+
+       lg = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &lg_dma);
+       if (lg == NULL) {
+               DEBUG2_3(printk("%s(%ld): failed to allocate Login IOCB.\n",
+                   __func__, ha->host_no));
+               return QLA_MEMORY_ALLOC_FAILED;
+       }
+       memset(lg, 0, sizeof(struct logio_entry_24xx));
+
+       lg->entry_type = LOGINOUT_PORT_IOCB_TYPE;
+       lg->entry_count = 1;
+       lg->nport_handle = cpu_to_le16(loop_id);
+       lg->control_flags = __constant_cpu_to_le16(LCF_COMMAND_PLOGI);
+       if (opt & BIT_0)
+               lg->control_flags |= __constant_cpu_to_le16(LCF_COND_PLOGI);
+       lg->port_id[0] = al_pa;
+       lg->port_id[1] = area;
+       lg->port_id[2] = domain;
+       rval = qla2x00_issue_iocb(ha, lg, lg_dma, 0);
+       if (rval != QLA_SUCCESS) {
+               DEBUG2_3_11(printk("%s(%ld): failed to issue Login IOCB "
+                   "(%x).\n", __func__, ha->host_no, rval);)
+       } else if (lg->entry_status != 0) {
+               DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
+                   "-- error status (%x).\n", __func__, ha->host_no,
+                   lg->entry_status));
+               rval = QLA_FUNCTION_FAILED;
+       } else if (lg->comp_status != __constant_cpu_to_le16(CS_COMPLETE)) {
+               iop[0] = le32_to_cpu(lg->io_parameter[0]);
+               iop[1] = le32_to_cpu(lg->io_parameter[1]);
+
+               DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
+                   "-- completion status (%x)  ioparam=%x/%x.\n", __func__,
+                   ha->host_no, le16_to_cpu(lg->comp_status), iop[0],
+                   iop[1]));
+
+               switch (iop[0]) {
+               case LSC_SCODE_PORTID_USED:
+                       mb[0] = MBS_PORT_ID_USED;
+                       mb[1] = LSW(iop[1]);
+                       break;
+               case LSC_SCODE_NPORT_USED:
+                       mb[0] = MBS_LOOP_ID_USED;
+                       break;
+               case LSC_SCODE_NOLINK:
+               case LSC_SCODE_NOIOCB:
+               case LSC_SCODE_NOXCB:
+               case LSC_SCODE_CMD_FAILED:
+               case LSC_SCODE_NOFABRIC:
+               case LSC_SCODE_FW_NOT_READY:
+               case LSC_SCODE_NOT_LOGGED_IN:
+               case LSC_SCODE_NOPCB:
+               case LSC_SCODE_ELS_REJECT:
+               case LSC_SCODE_CMD_PARAM_ERR:
+               case LSC_SCODE_NONPORT:
+               case LSC_SCODE_LOGGED_IN:
+               case LSC_SCODE_NOFLOGI_ACC:
+               default:
+                       mb[0] = MBS_COMMAND_ERROR;
+                       break;
+               }
+       } else {
+               DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);)
+
+               iop[0] = le32_to_cpu(lg->io_parameter[0]);
+
+               mb[0] = MBS_COMMAND_COMPLETE;
+               mb[1] = 0;
+               if (iop[0] & BIT_4) {
+                       if (iop[0] & BIT_8)
+                               mb[1] |= BIT_1;
+               } else
+                       mb[1] = BIT_0;
+       }
+
+       dma_pool_free(ha->s_dma_pool, lg, lg_dma);
+
+       return rval;
+}
+
 /*
  * qla2x00_login_fabric
  *     Issue login fabric port mailbox command.
@@ -1598,18 +1753,18 @@ qla2x00_login_fabric(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain,
 /*
  * qla2x00_login_local_device
  *           Issue login loop port mailbox command.
- *    
+ *
  * Input:
  *           ha = adapter block pointer.
  *           loop_id = device loop ID.
  *           opt = command options.
- *          
+ *
  * Returns:
  *            Return status code.
- *             
+ *
  * Context:
  *            Kernel context.
- *             
+ *
  */
 int
 qla2x00_login_local_device(scsi_qla_host_t *ha, uint16_t loop_id,
@@ -1665,6 +1820,57 @@ qla2x00_login_local_device(scsi_qla_host_t *ha, uint16_t loop_id,
        return (rval);
 }
 
+int
+qla24xx_fabric_logout(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain,
+    uint8_t area, uint8_t al_pa)
+{
+       int             rval;
+       struct logio_entry_24xx *lg;
+       dma_addr_t      lg_dma;
+
+       DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
+
+       lg = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &lg_dma);
+       if (lg == NULL) {
+               DEBUG2_3(printk("%s(%ld): failed to allocate Logout IOCB.\n",
+                   __func__, ha->host_no));
+               return QLA_MEMORY_ALLOC_FAILED;
+       }
+       memset(lg, 0, sizeof(struct logio_entry_24xx));
+
+       lg->entry_type = LOGINOUT_PORT_IOCB_TYPE;
+       lg->entry_count = 1;
+       lg->nport_handle = cpu_to_le16(loop_id);
+       lg->control_flags =
+           __constant_cpu_to_le16(LCF_COMMAND_LOGO|LCF_EXPL_LOGO);
+       lg->port_id[0] = al_pa;
+       lg->port_id[1] = area;
+       lg->port_id[2] = domain;
+       rval = qla2x00_issue_iocb(ha, lg, lg_dma, 0);
+       if (rval != QLA_SUCCESS) {
+               DEBUG2_3_11(printk("%s(%ld): failed to issue Logout IOCB "
+                   "(%x).\n", __func__, ha->host_no, rval);)
+       } else if (lg->entry_status != 0) {
+               DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
+                   "-- error status (%x).\n", __func__, ha->host_no,
+                   lg->entry_status));
+               rval = QLA_FUNCTION_FAILED;
+       } else if (lg->comp_status != __constant_cpu_to_le16(CS_COMPLETE)) {
+               DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
+                   "-- completion status (%x)  ioparam=%x/%x.\n", __func__,
+                   ha->host_no, le16_to_cpu(lg->comp_status),
+                   le32_to_cpu(lg->io_parameter[0]),
+                   le32_to_cpu(lg->io_parameter[1]));)
+       } else {
+               /*EMPTY*/
+               DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);)
+       }
+
+       dma_pool_free(ha->s_dma_pool, lg, lg_dma);
+
+       return rval;
+}
+
 /*
  * qla2x00_fabric_logout
  *     Issue logout fabric port mailbox command.
@@ -1682,7 +1888,8 @@ qla2x00_login_local_device(scsi_qla_host_t *ha, uint16_t loop_id,
  *     Kernel context.
  */
 int
-qla2x00_fabric_logout(scsi_qla_host_t *ha, uint16_t loop_id)
+qla2x00_fabric_logout(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain,
+    uint8_t area, uint8_t al_pa)
 {
        int rval;
        mbx_cmd_t mc;
@@ -1746,7 +1953,7 @@ qla2x00_full_login_lip(scsi_qla_host_t *ha)
 
        mcp->mb[0] = MBC_LIP_FULL_LOGIN;
        mcp->mb[1] = 0;
-       mcp->mb[2] = 0;
+       mcp->mb[2] = 0xff;
        mcp->mb[3] = 0;
        mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_0;
@@ -1757,7 +1964,7 @@ qla2x00_full_login_lip(scsi_qla_host_t *ha)
        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("qla2x00_full_login_lip(%ld): failed=%x.\n",
-                   ha->instance, rval);)
+                   ha->host_no, rval);)
        } else {
                /*EMPTY*/
                DEBUG11(printk("qla2x00_full_login_lip(%ld): done.\n",
@@ -1794,11 +2001,20 @@ qla2x00_get_id_list(scsi_qla_host_t *ha, void *id_list, dma_addr_t id_list_dma,
                return QLA_FUNCTION_FAILED;
 
        mcp->mb[0] = MBC_GET_ID_LIST;
-       mcp->mb[1] = MSW(id_list_dma);
-       mcp->mb[2] = LSW(id_list_dma);
-       mcp->mb[3] = MSW(MSD(id_list_dma));
-       mcp->mb[6] = LSW(MSD(id_list_dma));
-       mcp->out_mb = MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+       mcp->out_mb = MBX_0;
+       if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+               mcp->mb[2] = MSW(id_list_dma);
+               mcp->mb[3] = LSW(id_list_dma);
+               mcp->mb[6] = MSW(MSD(id_list_dma));
+               mcp->mb[7] = LSW(MSD(id_list_dma));
+               mcp->out_mb |= MBX_7|MBX_6|MBX_3|MBX_2;
+       } else {
+               mcp->mb[1] = MSW(id_list_dma);
+               mcp->mb[2] = LSW(id_list_dma);
+               mcp->mb[3] = MSW(MSD(id_list_dma));
+               mcp->mb[6] = LSW(MSD(id_list_dma));
+               mcp->out_mb |= MBX_6|MBX_3|MBX_2|MBX_1;
+       }
        mcp->in_mb = MBX_1|MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
@@ -1854,7 +2070,7 @@ qla2x00_get_resource_cnts(scsi_qla_host_t *ha, uint16_t *cur_xchg_cnt,
        } else {
                DEBUG11(printk("%s(%ld): done. mb1=%x mb2=%x mb3=%x mb6=%x "
                    "mb7=%x mb10=%x.\n", __func__, ha->host_no,
-                   mcp->mb[1], mcp->mb[2], mcp->mb[3], mcp->mb[6], mcp->mb[7], 
+                   mcp->mb[1], mcp->mb[2], mcp->mb[3], mcp->mb[6], mcp->mb[7],
                    mcp->mb[10]));
 
                if (cur_xchg_cnt)
@@ -1934,4 +2150,318 @@ qla2x00_get_fcal_position_map(scsi_qla_host_t *ha, char *pos_map)
 
        return rval;
 }
+
+uint8_t
+qla24xx_get_isp_stats(scsi_qla_host_t *ha, uint32_t *dwbuf, uint32_t dwords,
+    uint16_t *status)
+{
+       int rval;
+       mbx_cmd_t mc;
+       mbx_cmd_t *mcp = &mc;
+       uint32_t *sbuf, *siter;
+       dma_addr_t sbuf_dma;
+
+       DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
+
+       if (dwords > (DMA_POOL_SIZE / 4)) {
+               DEBUG2_3_11(printk("%s(%ld): Unabled to retrieve %d DWORDs "
+                   "(max %d).\n", __func__, ha->host_no, dwords,
+                   DMA_POOL_SIZE / 4));
+               return BIT_0;
+       }
+       sbuf = dma_pool_alloc(ha->s_dma_pool, GFP_ATOMIC, &sbuf_dma);
+       if (sbuf == NULL) {
+               DEBUG2_3_11(printk("%s(%ld): Failed to allocate memory.\n",
+                   __func__, ha->host_no));
+               return BIT_0;
+       }
+       memset(sbuf, 0, DMA_POOL_SIZE);
+
+       mcp->mb[0] = MBC_GET_LINK_PRIV_STATS;
+       mcp->mb[2] = MSW(sbuf_dma);
+       mcp->mb[3] = LSW(sbuf_dma);
+       mcp->mb[6] = MSW(MSD(sbuf_dma));
+       mcp->mb[7] = LSW(MSD(sbuf_dma));
+       mcp->mb[8] = dwords;
+       mcp->mb[10] = 0;
+       mcp->out_mb = MBX_10|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_0;
+       mcp->in_mb = MBX_2|MBX_1|MBX_0;
+       mcp->tov = 30;
+       mcp->flags = IOCTL_CMD;
+       rval = qla2x00_mailbox_command(ha, mcp);
+
+       if (rval == QLA_SUCCESS) {
+               if (mcp->mb[0] != MBS_COMMAND_COMPLETE) {
+                       DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n",
+                           __func__, ha->host_no, mcp->mb[0]));
+                       status[0] = mcp->mb[0];
+                       rval = BIT_1;
+               } else {
+                       /* Copy over data -- firmware data is LE. */
+                       siter = sbuf;
+                       while (dwords--)
+                               *dwbuf++ = le32_to_cpu(*siter++);
+               }
+       } else {
+               /* Failed. */
+               DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
+                   ha->host_no, rval));
+               rval = BIT_1;
+       }
+
+       dma_pool_free(ha->s_dma_pool, sbuf, sbuf_dma);
+
+       return rval;
+}
 #endif
+
+int
+qla24xx_abort_command(scsi_qla_host_t *ha, srb_t *sp)
+{
+       int             rval;
+       fc_port_t       *fcport;
+       unsigned long   flags = 0;
+
+       struct abort_entry_24xx *abt;
+       dma_addr_t      abt_dma;
+       uint32_t        handle;
+
+       DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
+
+       fcport = sp->fcport;
+       if (atomic_read(&ha->loop_state) == LOOP_DOWN ||
+           atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
+               return QLA_FUNCTION_FAILED;
+       }
+
+       spin_lock_irqsave(&ha->hardware_lock, flags);
+       for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
+               if (ha->outstanding_cmds[handle] == sp)
+                       break;
+       }
+       spin_unlock_irqrestore(&ha->hardware_lock, flags);
+       if (handle == MAX_OUTSTANDING_COMMANDS) {
+               /* Command not found. */
+               return QLA_FUNCTION_FAILED;
+       }
+
+       abt = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &abt_dma);
+       if (abt == NULL) {
+               DEBUG2_3(printk("%s(%ld): failed to allocate Abort IOCB.\n",
+                   __func__, ha->host_no));
+               return QLA_MEMORY_ALLOC_FAILED;
+       }
+       memset(abt, 0, sizeof(struct abort_entry_24xx));
+
+       abt->entry_type = ABORT_IOCB_TYPE;
+       abt->entry_count = 1;
+       abt->nport_handle = cpu_to_le16(fcport->loop_id);
+       abt->handle_to_abort = handle;
+       abt->port_id[0] = fcport->d_id.b.al_pa;
+       abt->port_id[1] = fcport->d_id.b.area;
+       abt->port_id[2] = fcport->d_id.b.domain;
+       rval = qla2x00_issue_iocb(ha, abt, abt_dma, 0);
+       if (rval != QLA_SUCCESS) {
+               DEBUG2_3_11(printk("%s(%ld): failed to issue IOCB (%x).\n",
+                   __func__, ha->host_no, rval);)
+       } else if (abt->entry_status != 0) {
+               DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
+                   "-- error status (%x).\n", __func__, ha->host_no,
+                   abt->entry_status));
+               rval = QLA_FUNCTION_FAILED;
+       } else if (abt->nport_handle != __constant_cpu_to_le16(0)) {
+               DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
+                   "-- completion status (%x).\n", __func__, ha->host_no,
+                   le16_to_cpu(abt->nport_handle));)
+               rval = QLA_FUNCTION_FAILED;
+       } else {
+               DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);)
+               sp->flags |= SRB_ABORT_PENDING;
+       }
+
+       dma_pool_free(ha->s_dma_pool, abt, abt_dma);
+
+       return rval;
+}
+
+struct tsk_mgmt_cmd {
+       union {
+               struct tsk_mgmt_entry tsk;
+               struct sts_entry_24xx sts;
+       } p;
+};
+
+int
+qla24xx_abort_target(fc_port_t *fcport)
+{
+       int             rval;
+       struct tsk_mgmt_cmd *tsk;
+       dma_addr_t      tsk_dma;
+       scsi_qla_host_t *ha;
+
+       if (fcport == NULL)
+               return 0;
+
+       DEBUG11(printk("%s(%ld): entered.\n", __func__, fcport->ha->host_no);)
+
+       ha = fcport->ha;
+       tsk = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &tsk_dma);
+       if (tsk == NULL) {
+               DEBUG2_3(printk("%s(%ld): failed to allocate Task Management "
+                   "IOCB.\n", __func__, ha->host_no));
+               return QLA_MEMORY_ALLOC_FAILED;
+       }
+       memset(tsk, 0, sizeof(struct tsk_mgmt_cmd));
+
+       tsk->p.tsk.entry_type = TSK_MGMT_IOCB_TYPE;
+       tsk->p.tsk.entry_count = 1;
+       tsk->p.tsk.nport_handle = cpu_to_le16(fcport->loop_id);
+       tsk->p.tsk.timeout = __constant_cpu_to_le16(25);
+       tsk->p.tsk.control_flags = __constant_cpu_to_le32(TCF_TARGET_RESET);
+       tsk->p.tsk.port_id[0] = fcport->d_id.b.al_pa;
+       tsk->p.tsk.port_id[1] = fcport->d_id.b.area;
+       tsk->p.tsk.port_id[2] = fcport->d_id.b.domain;
+       rval = qla2x00_issue_iocb(ha, tsk, tsk_dma, 0);
+       if (rval != QLA_SUCCESS) {
+               DEBUG2_3_11(printk("%s(%ld): failed to issue Target Reset IOCB "
+                   "(%x).\n", __func__, ha->host_no, rval);)
+               goto atarget_done;
+       } else if (tsk->p.sts.entry_status != 0) {
+               DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
+                   "-- error status (%x).\n", __func__, ha->host_no,
+                   tsk->p.sts.entry_status));
+               rval = QLA_FUNCTION_FAILED;
+               goto atarget_done;
+       } else if (tsk->p.sts.comp_status !=
+           __constant_cpu_to_le16(CS_COMPLETE)) {
+               DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
+                   "-- completion status (%x).\n", __func__,
+                   ha->host_no, le16_to_cpu(tsk->p.sts.comp_status));)
+               rval = QLA_FUNCTION_FAILED;
+               goto atarget_done;
+       }
+
+       /* Issue marker IOCB. */
+       rval = qla2x00_marker(ha, fcport->loop_id, 0, MK_SYNC_ID);
+       if (rval != QLA_SUCCESS) {
+               DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB "
+                   "(%x).\n", __func__, ha->host_no, rval);)
+       } else {
+               DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);)
+       }
+
+atarget_done:
+       dma_pool_free(ha->s_dma_pool, tsk, tsk_dma);
+
+       return rval;
+}
+
+int
+qla2x00_system_error(scsi_qla_host_t *ha)
+{
+       int rval;
+       mbx_cmd_t mc;
+       mbx_cmd_t *mcp = &mc;
+
+       if (!IS_QLA24XX(ha) && !IS_QLA25XX(ha))
+               return QLA_FUNCTION_FAILED;
+
+       DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
+
+       mcp->mb[0] = MBC_GEN_SYSTEM_ERROR;
+       mcp->out_mb = MBX_0;
+       mcp->in_mb = MBX_0;
+       mcp->tov = 5;
+       mcp->flags = 0;
+       rval = qla2x00_mailbox_command(ha, mcp);
+
+       if (rval != QLA_SUCCESS) {
+               DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
+                   ha->host_no, rval));
+       } else {
+               DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
+       }
+
+       return rval;
+}
+
+/**
+ * qla2x00_get_serdes_params() -
+ * @ha: HA context
+ *
+ * Returns
+ */
+int
+qla2x00_get_serdes_params(scsi_qla_host_t *ha, uint16_t *sw_em_1g,
+    uint16_t *sw_em_2g, uint16_t *sw_em_4g)
+{
+       int rval;
+       mbx_cmd_t mc;
+       mbx_cmd_t *mcp = &mc;
+
+       DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
+
+       mcp->mb[0] = MBC_SERDES_PARAMS;
+       mcp->mb[1] = 0;
+       mcp->out_mb = MBX_1|MBX_0;
+       mcp->in_mb = MBX_4|MBX_3|MBX_2|MBX_0;
+       mcp->tov = 30;
+       mcp->flags = 0;
+       rval = qla2x00_mailbox_command(ha, mcp);
+
+       if (rval != QLA_SUCCESS) {
+               /*EMPTY*/
+               DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
+                   ha->host_no, rval, mcp->mb[0]));
+       } else {
+               DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
+
+               if (sw_em_1g)
+                       *sw_em_1g = mcp->mb[2];
+               if (sw_em_2g)
+                       *sw_em_2g = mcp->mb[3];
+               if (sw_em_4g)
+                       *sw_em_4g = mcp->mb[4];
+       }
+
+       return rval;
+}
+
+/**
+ * qla2x00_set_serdes_params() -
+ * @ha: HA context
+ *
+ * Returns
+ */
+int
+qla2x00_set_serdes_params(scsi_qla_host_t *ha, uint16_t sw_em_1g,
+    uint16_t sw_em_2g, uint16_t sw_em_4g)
+{
+       int rval;
+       mbx_cmd_t mc;
+       mbx_cmd_t *mcp = &mc;
+
+       DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
+
+       mcp->mb[0] = MBC_SERDES_PARAMS;
+       mcp->mb[1] = BIT_0;
+       mcp->mb[2] = sw_em_1g;
+       mcp->mb[3] = sw_em_2g;
+       mcp->mb[4] = sw_em_4g;
+       mcp->out_mb = MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+       mcp->in_mb = MBX_0;
+       mcp->tov = 30;
+       mcp->flags = 0;
+       rval = qla2x00_mailbox_command(ha, mcp);
+
+       if (rval != QLA_SUCCESS) {
+               /*EMPTY*/
+               DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
+                   ha->host_no, rval, mcp->mb[0]));
+       } else {
+               /*EMPTY*/
+               DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
+       }
+
+       return rval;
+}