/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
#include <scsi/scsi_transport_fc.h>
#include "lpfc_version.h"
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
"SCSI_PROT_READ_CONVERT",
"SCSI_PROT_WRITE_CONVERT"
};
+static void
+lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
static void
lpfc_debug_save_data(struct scsi_cmnd *cmnd)
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
shost = lpfc_shost_from_vport(vports[i]);
shost_for_each_device(sdev, shost) {
new_queue_depth =
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
shost = lpfc_shost_from_vport(vports[i]);
shost_for_each_device(sdev, shost) {
if (vports[i]->cfg_lun_queue_depth <=
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
shost = lpfc_shost_from_vport(vports[i]);
shost_for_each_device(sdev, shost) {
rport = starget_to_rport(scsi_target(sdev));
}
/**
- * lpfc_new_scsi_buf - Scsi buffer allocator
+ * lpfc_new_scsi_buf_s3 - Scsi buffer allocator for HBA with SLI3 IF spec
* @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
*
- * This routine allocates a scsi buffer, which contains all the necessary
- * information needed to initiate a SCSI I/O. The non-DMAable buffer region
- * contains information to build the IOCB. The DMAable region contains
- * memory for the FCP CMND, FCP RSP, and the initial BPL. In addition to
- * allocating memory, the FCP CMND and FCP RSP BDEs are setup in the BPL
- * and the BPL BDE is setup in the IOCB.
+ * This routine allocates a scsi buffer for device with SLI-3 interface spec,
+ * the scsi buffer contains all the necessary information needed to initiate
+ * a SCSI I/O. The non-DMAable buffer region contains information to build
+ * the IOCB. The DMAable region contains memory for the FCP CMND, FCP RSP,
+ * and the initial BPL. In addition to allocating memory, the FCP CMND and
+ * FCP RSP BDEs are setup in the BPL and the BPL BDE is setup in the IOCB.
*
* Return codes:
- * NULL - Error
- * Pointer to lpfc_scsi_buf data structure - Success
+ * int - number of scsi buffers that were allocated.
+ * 0 = failure, less than num_to_alloc is a partial failure.
**/
-static struct lpfc_scsi_buf *
-lpfc_new_scsi_buf(struct lpfc_vport *vport)
+static int
+lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc)
{
struct lpfc_hba *phba = vport->phba;
struct lpfc_scsi_buf *psb;
dma_addr_t pdma_phys_fcp_rsp;
dma_addr_t pdma_phys_bpl;
uint16_t iotag;
+ int bcnt;
- psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
- if (!psb)
- return NULL;
+ for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
+ psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
+ if (!psb)
+ break;
+
+ /*
+ * Get memory from the pci pool to map the virt space to pci
+ * bus space for an I/O. The DMA buffer includes space for the
+ * struct fcp_cmnd, struct fcp_rsp and the number of bde's
+ * necessary to support the sg_tablesize.
+ */
+ psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
+ GFP_KERNEL, &psb->dma_handle);
+ if (!psb->data) {
+ kfree(psb);
+ break;
+ }
+
+ /* Initialize virtual ptrs to dma_buf region. */
+ memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
+
+ /* Allocate iotag for psb->cur_iocbq. */
+ iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
+ if (iotag == 0) {
+ pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
+ psb->data, psb->dma_handle);
+ kfree(psb);
+ break;
+ }
+ psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
+
+ psb->fcp_cmnd = psb->data;
+ psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
+ psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp);
+
+ /* Initialize local short-hand pointers. */
+ bpl = psb->fcp_bpl;
+ pdma_phys_fcp_cmd = psb->dma_handle;
+ pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
+ pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp);
+
+ /*
+ * The first two bdes are the FCP_CMD and FCP_RSP. The balance
+ * are sg list bdes. Initialize the first two and leave the
+ * rest for queuecommand.
+ */
+ bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
+ bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
+ bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
+ bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w);
+
+ /* Setup the physical region for the FCP RSP */
+ bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
+ bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
+ bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
+ bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w);
+
+ /*
+ * Since the IOCB for the FCP I/O is built into this
+ * lpfc_scsi_buf, initialize it with all known data now.
+ */
+ iocb = &psb->cur_iocbq.iocb;
+ iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
+ if ((phba->sli_rev == 3) &&
+ !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
+ /* fill in immediate fcp command BDE */
+ iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
+ iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
+ iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
+ unsli3.fcp_ext.icd);
+ iocb->un.fcpi64.bdl.addrHigh = 0;
+ iocb->ulpBdeCount = 0;
+ iocb->ulpLe = 0;
+ /* fill in responce BDE */
+ iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags =
+ BUFF_TYPE_BDE_64;
+ iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
+ sizeof(struct fcp_rsp);
+ iocb->unsli3.fcp_ext.rbde.addrLow =
+ putPaddrLow(pdma_phys_fcp_rsp);
+ iocb->unsli3.fcp_ext.rbde.addrHigh =
+ putPaddrHigh(pdma_phys_fcp_rsp);
+ } else {
+ iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
+ iocb->un.fcpi64.bdl.bdeSize =
+ (2 * sizeof(struct ulp_bde64));
+ iocb->un.fcpi64.bdl.addrLow =
+ putPaddrLow(pdma_phys_bpl);
+ iocb->un.fcpi64.bdl.addrHigh =
+ putPaddrHigh(pdma_phys_bpl);
+ iocb->ulpBdeCount = 1;
+ iocb->ulpLe = 1;
+ }
+ iocb->ulpClass = CLASS3;
+ psb->status = IOSTAT_SUCCESS;
+ /* Put it back into the SCSI buffer list */
+ lpfc_release_scsi_buf_s4(phba, psb);
- /*
- * Get memory from the pci pool to map the virt space to pci bus space
- * for an I/O. The DMA buffer includes space for the struct fcp_cmnd,
- * struct fcp_rsp and the number of bde's necessary to support the
- * sg_tablesize.
- */
- psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool, GFP_KERNEL,
- &psb->dma_handle);
- if (!psb->data) {
- kfree(psb);
- return NULL;
}
- /* Initialize virtual ptrs to dma_buf region. */
- memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
+ return bcnt;
+}
- /* Allocate iotag for psb->cur_iocbq. */
- iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
- if (iotag == 0) {
- pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
- psb->data, psb->dma_handle);
- kfree (psb);
- return NULL;
+/**
+ * lpfc_sli4_fcp_xri_aborted - Fast-path process of fcp xri abort
+ * @phba: pointer to lpfc hba data structure.
+ * @axri: pointer to the fcp xri abort wcqe structure.
+ *
+ * This routine is invoked by the worker thread to process a SLI4 fast-path
+ * FCP aborted xri.
+ **/
+void
+lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba,
+ struct sli4_wcqe_xri_aborted *axri)
+{
+ uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
+ struct lpfc_scsi_buf *psb, *next_psb;
+ unsigned long iflag = 0;
+
+ spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock, iflag);
+ list_for_each_entry_safe(psb, next_psb,
+ &phba->sli4_hba.lpfc_abts_scsi_buf_list, list) {
+ if (psb->cur_iocbq.sli4_xritag == xri) {
+ list_del(&psb->list);
+ psb->status = IOSTAT_SUCCESS;
+ spin_unlock_irqrestore(
+ &phba->sli4_hba.abts_scsi_buf_list_lock,
+ iflag);
+ lpfc_release_scsi_buf_s4(phba, psb);
+ return;
+ }
+ }
+ spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
+ iflag);
+}
+
+/**
+ * lpfc_sli4_repost_scsi_sgl_list - Repsot the Scsi buffers sgl pages as block
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine walks the list of scsi buffers that have been allocated and
+ * repost them to the HBA by using SGL block post. This is needed after a
+ * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
+ * is responsible for moving all scsi buffers on the lpfc_abts_scsi_sgl_list
+ * to the lpfc_scsi_buf_list. If the repost fails, reject all scsi buffers.
+ *
+ * Returns: 0 = success, non-zero failure.
+ **/
+int
+lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba)
+{
+ struct lpfc_scsi_buf *psb;
+ int index, status, bcnt = 0, rcnt = 0, rc = 0;
+ LIST_HEAD(sblist);
+
+ for (index = 0; index < phba->sli4_hba.scsi_xri_cnt; index++) {
+ psb = phba->sli4_hba.lpfc_scsi_psb_array[index];
+ if (psb) {
+ /* Remove from SCSI buffer list */
+ list_del(&psb->list);
+ /* Add it to a local SCSI buffer list */
+ list_add_tail(&psb->list, &sblist);
+ if (++rcnt == LPFC_NEMBED_MBOX_SGL_CNT) {
+ bcnt = rcnt;
+ rcnt = 0;
+ }
+ } else
+ /* A hole present in the XRI array, need to skip */
+ bcnt = rcnt;
+
+ if (index == phba->sli4_hba.scsi_xri_cnt - 1)
+ /* End of XRI array for SCSI buffer, complete */
+ bcnt = rcnt;
+
+ /* Continue until collect up to a nembed page worth of sgls */
+ if (bcnt == 0)
+ continue;
+ /* Now, post the SCSI buffer list sgls as a block */
+ status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt);
+ /* Reset SCSI buffer count for next round of posting */
+ bcnt = 0;
+ while (!list_empty(&sblist)) {
+ list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
+ list);
+ if (status) {
+ /* Put this back on the abort scsi list */
+ psb->status = IOSTAT_LOCAL_REJECT;
+ psb->result = IOERR_ABORT_REQUESTED;
+ rc++;
+ } else
+ psb->status = IOSTAT_SUCCESS;
+ /* Put it back into the SCSI buffer list */
+ lpfc_release_scsi_buf_s4(phba, psb);
+ }
}
- psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
+ return rc;
+}
- psb->fcp_cmnd = psb->data;
- psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
- psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
- sizeof(struct fcp_rsp);
+/**
+ * lpfc_new_scsi_buf_s4 - Scsi buffer allocator for HBA with SLI4 IF spec
+ * @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
+ *
+ * This routine allocates a scsi buffer for device with SLI-4 interface spec,
+ * the scsi buffer contains all the necessary information needed to initiate
+ * a SCSI I/O.
+ *
+ * Return codes:
+ * int - number of scsi buffers that were allocated.
+ * 0 = failure, less than num_to_alloc is a partial failure.
+ **/
+static int
+lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_scsi_buf *psb;
+ struct sli4_sge *sgl;
+ IOCB_t *iocb;
+ dma_addr_t pdma_phys_fcp_cmd;
+ dma_addr_t pdma_phys_fcp_rsp;
+ dma_addr_t pdma_phys_bpl, pdma_phys_bpl1;
+ uint16_t iotag, last_xritag = NO_XRI;
+ int status = 0, index;
+ int bcnt;
+ int non_sequential_xri = 0;
+ int rc = 0;
+ LIST_HEAD(sblist);
+
+ for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
+ psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
+ if (!psb)
+ break;
- /* Initialize local short-hand pointers. */
- bpl = psb->fcp_bpl;
- pdma_phys_fcp_cmd = psb->dma_handle;
- pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
- pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
- sizeof(struct fcp_rsp);
+ /*
+ * Get memory from the pci pool to map the virt space to pci bus
+ * space for an I/O. The DMA buffer includes space for the
+ * struct fcp_cmnd, struct fcp_rsp and the number of bde's
+ * necessary to support the sg_tablesize.
+ */
+ psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
+ GFP_KERNEL, &psb->dma_handle);
+ if (!psb->data) {
+ kfree(psb);
+ break;
+ }
- /*
- * The first two bdes are the FCP_CMD and FCP_RSP. The balance are sg
- * list bdes. Initialize the first two and leave the rest for
- * queuecommand.
- */
- bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
- bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
- bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
- bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
- bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w);
-
- /* Setup the physical region for the FCP RSP */
- bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
- bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
- bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
- bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
- bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w);
+ /* Initialize virtual ptrs to dma_buf region. */
+ memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
- /*
- * Since the IOCB for the FCP I/O is built into this lpfc_scsi_buf,
- * initialize it with all known data now.
- */
- iocb = &psb->cur_iocbq.iocb;
- iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
- if ((phba->sli_rev == 3) &&
- !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
- /* fill in immediate fcp command BDE */
- iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
+ /* Allocate iotag for psb->cur_iocbq. */
+ iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
+ if (iotag == 0) {
+ kfree(psb);
+ break;
+ }
+
+ psb->cur_iocbq.sli4_xritag = lpfc_sli4_next_xritag(phba);
+ if (psb->cur_iocbq.sli4_xritag == NO_XRI) {
+ pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
+ psb->data, psb->dma_handle);
+ kfree(psb);
+ break;
+ }
+ if (last_xritag != NO_XRI
+ && psb->cur_iocbq.sli4_xritag != (last_xritag+1)) {
+ non_sequential_xri = 1;
+ } else
+ list_add_tail(&psb->list, &sblist);
+ last_xritag = psb->cur_iocbq.sli4_xritag;
+
+ index = phba->sli4_hba.scsi_xri_cnt++;
+ psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
+
+ psb->fcp_bpl = psb->data;
+ psb->fcp_cmnd = (psb->data + phba->cfg_sg_dma_buf_size)
+ - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+ psb->fcp_rsp = (struct fcp_rsp *)((uint8_t *)psb->fcp_cmnd +
+ sizeof(struct fcp_cmnd));
+
+ /* Initialize local short-hand pointers. */
+ sgl = (struct sli4_sge *)psb->fcp_bpl;
+ pdma_phys_bpl = psb->dma_handle;
+ pdma_phys_fcp_cmd =
+ (psb->dma_handle + phba->cfg_sg_dma_buf_size)
+ - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+ pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd);
+
+ /*
+ * The first two bdes are the FCP_CMD and FCP_RSP. The balance
+ * are sg list bdes. Initialize the first two and leave the
+ * rest for queuecommand.
+ */
+ sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd));
+ sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd));
+ bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_cmnd));
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->word3 = cpu_to_le32(sgl->word3);
+ sgl++;
+
+ /* Setup the physical region for the FCP RSP */
+ sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_rsp));
+ sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_rsp));
+ bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_rsp));
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->word3 = cpu_to_le32(sgl->word3);
+
+ /*
+ * Since the IOCB for the FCP I/O is built into this
+ * lpfc_scsi_buf, initialize it with all known data now.
+ */
+ iocb = &psb->cur_iocbq.iocb;
+ iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
+ iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_64;
+ /* setting the BLP size to 2 * sizeof BDE may not be correct.
+ * We are setting the bpl to point to out sgl. An sgl's
+ * entries are 16 bytes, a bpl entries are 12 bytes.
+ */
iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
- iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
- unsli3.fcp_ext.icd);
- iocb->un.fcpi64.bdl.addrHigh = 0;
- iocb->ulpBdeCount = 0;
- iocb->ulpLe = 0;
- /* fill in responce BDE */
- iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
- iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
- sizeof(struct fcp_rsp);
- iocb->unsli3.fcp_ext.rbde.addrLow =
- putPaddrLow(pdma_phys_fcp_rsp);
- iocb->unsli3.fcp_ext.rbde.addrHigh =
- putPaddrHigh(pdma_phys_fcp_rsp);
- } else {
- iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
- iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
- iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_bpl);
- iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_bpl);
+ iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_fcp_cmd);
+ iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_fcp_cmd);
iocb->ulpBdeCount = 1;
iocb->ulpLe = 1;
+ iocb->ulpClass = CLASS3;
+ if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
+ pdma_phys_bpl1 = pdma_phys_bpl + SGL_PAGE_SIZE;
+ else
+ pdma_phys_bpl1 = 0;
+ psb->dma_phys_bpl = pdma_phys_bpl;
+ phba->sli4_hba.lpfc_scsi_psb_array[index] = psb;
+ if (non_sequential_xri) {
+ status = lpfc_sli4_post_sgl(phba, pdma_phys_bpl,
+ pdma_phys_bpl1,
+ psb->cur_iocbq.sli4_xritag);
+ if (status) {
+ /* Put this back on the abort scsi list */
+ psb->status = IOSTAT_LOCAL_REJECT;
+ psb->result = IOERR_ABORT_REQUESTED;
+ rc++;
+ } else
+ psb->status = IOSTAT_SUCCESS;
+ /* Put it back into the SCSI buffer list */
+ lpfc_release_scsi_buf_s4(phba, psb);
+ break;
+ }
+ }
+ if (bcnt) {
+ status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt);
+ /* Reset SCSI buffer count for next round of posting */
+ while (!list_empty(&sblist)) {
+ list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
+ list);
+ if (status) {
+ /* Put this back on the abort scsi list */
+ psb->status = IOSTAT_LOCAL_REJECT;
+ psb->result = IOERR_ABORT_REQUESTED;
+ rc++;
+ } else
+ psb->status = IOSTAT_SUCCESS;
+ /* Put it back into the SCSI buffer list */
+ lpfc_release_scsi_buf_s4(phba, psb);
+ }
}
- iocb->ulpClass = CLASS3;
- return psb;
+ return bcnt + non_sequential_xri - rc;
}
/**
- * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list list of Hba
- * @phba: The Hba for which this call is being executed.
+ * lpfc_new_scsi_buf - Wrapper funciton for scsi buffer allocator
+ * @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
+ *
+ * This routine wraps the actual SCSI buffer allocator function pointer from
+ * the lpfc_hba struct.
+ *
+ * Return codes:
+ * int - number of scsi buffers that were allocated.
+ * 0 = failure, less than num_to_alloc is a partial failure.
+ **/
+static inline int
+lpfc_new_scsi_buf(struct lpfc_vport *vport, int num_to_alloc)
+{
+ return vport->phba->lpfc_new_scsi_buf(vport, num_to_alloc);
+}
+
+/**
+ * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
+ * @phba: The HBA for which this call is being executed.
*
* This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
* and returns to caller.
}
/**
- * lpfc_release_scsi_buf - Return a scsi buffer back to hba's lpfc_scsi_buf_list
+ * lpfc_release_scsi_buf - Return a scsi buffer back to hba scsi buf list
* @phba: The Hba for which this call is being executed.
* @psb: The scsi buffer which is being released.
*
* lpfc_scsi_buf_list list.
**/
static void
-lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
{
unsigned long iflag = 0;
}
/**
- * lpfc_scsi_prep_dma_buf - Routine to do DMA mapping for scsi buffer
+ * lpfc_release_scsi_buf_s4: Return a scsi buffer back to hba scsi buf list.
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is being released.
+ *
+ * This routine releases @psb scsi buffer by adding it to tail of @phba
+ * lpfc_scsi_buf_list list. For SLI4 XRI's are tied to the scsi buffer
+ * and cannot be reused for at least RA_TOV amount of time if it was
+ * aborted.
+ **/
+static void
+lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+ unsigned long iflag = 0;
+
+ if (psb->status == IOSTAT_LOCAL_REJECT
+ && psb->result == IOERR_ABORT_REQUESTED) {
+ spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock,
+ iflag);
+ psb->pCmd = NULL;
+ list_add_tail(&psb->list,
+ &phba->sli4_hba.lpfc_abts_scsi_buf_list);
+ spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
+ iflag);
+ } else {
+
+ spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
+ psb->pCmd = NULL;
+ list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list);
+ spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
+ }
+}
+
+/**
+ * lpfc_release_scsi_buf: Return a scsi buffer back to hba scsi buf list.
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is being released.
+ *
+ * This routine releases @psb scsi buffer by adding it to tail of @phba
+ * lpfc_scsi_buf_list list.
+ **/
+static void
+lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+
+ phba->lpfc_release_scsi_buf(phba, psb);
+}
+
+/**
+ * lpfc_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
* @phba: The Hba for which this call is being executed.
* @lpfc_cmd: The scsi buffer which is going to be mapped.
*
* This routine does the pci dma mapping for scatter-gather list of scsi cmnd
- * field of @lpfc_cmd. This routine scans through sg elements and format the
- * bdea. This routine also initializes all IOCB fields which are dependent on
- * scsi command request buffer.
+ * field of @lpfc_cmd for device with SLI-3 interface spec. This routine scans
+ * through sg elements and format the bdea. This routine also initializes all
+ * IOCB fields which are dependent on scsi command request buffer.
*
* Return codes:
* 1 - Error
* 0 - Success
**/
static int
-lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
{
struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
struct scatterlist *sgel = NULL;
return ret;
}
+/**
+ * lpfc_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
+ * field of @lpfc_cmd for device with SLI-4 interface spec.
+ *
+ * Return codes:
+ * 1 - Error
+ * 0 - Success
+ **/
+static int
+lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+{
+ struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
+ struct scatterlist *sgel = NULL;
+ struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
+ struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+ IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
+ dma_addr_t physaddr;
+ uint32_t num_bde = 0;
+ uint32_t dma_len;
+ uint32_t dma_offset = 0;
+ int nseg;
+
+ /*
+ * There are three possibilities here - use scatter-gather segment, use
+ * the single mapping, or neither. Start the lpfc command prep by
+ * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
+ * data bde entry.
+ */
+ if (scsi_sg_count(scsi_cmnd)) {
+ /*
+ * The driver stores the segment count returned from pci_map_sg
+ * because this a count of dma-mappings used to map the use_sg
+ * pages. They are not guaranteed to be the same for those
+ * architectures that implement an IOMMU.
+ */
+
+ nseg = scsi_dma_map(scsi_cmnd);
+ if (unlikely(!nseg))
+ return 1;
+ sgl += 1;
+ /* clear the last flag in the fcp_rsp map entry */
+ sgl->word2 = le32_to_cpu(sgl->word2);
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl += 1;
+
+ lpfc_cmd->seg_cnt = nseg;
+ if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
+ printk(KERN_ERR "%s: Too many sg segments from "
+ "dma_map_sg. Config %d, seg_cnt %d\n",
+ __func__, phba->cfg_sg_seg_cnt,
+ lpfc_cmd->seg_cnt);
+ scsi_dma_unmap(scsi_cmnd);
+ return 1;
+ }
+
+ /*
+ * The driver established a maximum scatter-gather segment count
+ * during probe that limits the number of sg elements in any
+ * single scsi command. Just run through the seg_cnt and format
+ * the sge's.
+ * When using SLI-3 the driver will try to fit all the BDEs into
+ * the IOCB. If it can't then the BDEs get added to a BPL as it
+ * does for SLI-2 mode.
+ */
+ scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
+ physaddr = sg_dma_address(sgel);
+ dma_len = sg_dma_len(sgel);
+ bf_set(lpfc_sli4_sge_len, sgl, sg_dma_len(sgel));
+ sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
+ sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
+ if ((num_bde + 1) == nseg)
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ else
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->word3 = cpu_to_le32(sgl->word3);
+ dma_offset += dma_len;
+ sgl++;
+ }
+ } else {
+ sgl += 1;
+ /* clear the last flag in the fcp_rsp map entry */
+ sgl->word2 = le32_to_cpu(sgl->word2);
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ }
+
+ /*
+ * Finish initializing those IOCB fields that are dependent on the
+ * scsi_cmnd request_buffer. Note that for SLI-2 the bdeSize is
+ * explicitly reinitialized.
+ * all iocb memory resources are reused.
+ */
+ fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));
+
+ /*
+ * Due to difference in data length between DIF/non-DIF paths,
+ * we need to set word 4 of IOCB here
+ */
+ iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
+ return 0;
+}
+
+/**
+ * lpfc_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This routine wraps the actual DMA mapping function pointer from the
+ * lpfc_hba struct.
+ *
+ * Return codes:
+ * 1 - Error
+ * 0 - Success
+ **/
+static inline int
+lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+{
+ return phba->lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
+}
+
/**
* lpfc_send_scsi_error_event - Posts an event when there is SCSI error
* @phba: Pointer to hba context object.
}
/**
- * lpfc_scsi_unprep_dma_buf - Routine to un-map DMA mapping of scatter gather
- * @phba: The Hba for which this call is being executed.
+ * lpfc_scsi_unprep_dma_buf_s3 - Un-map DMA mapping of SG-list for SLI3 dev
+ * @phba: The HBA for which this call is being executed.
* @psb: The scsi buffer which is going to be un-mapped.
*
* This routine does DMA un-mapping of scatter gather list of scsi command
- * field of @lpfc_cmd.
+ * field of @lpfc_cmd for device with SLI-3 interface spec.
**/
static void
-lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
+lpfc_scsi_unprep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
{
/*
* There are only two special cases to consider. (1) the scsi command
psb->pCmd->sc_data_direction);
}
+/**
+ * lpfc_scsi_unprep_dma_buf_s4 - Un-map DMA mapping of SG-list for SLI4 dev
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is going to be un-mapped.
+ *
+ * This routine does DMA un-mapping of scatter gather list of scsi command
+ * field of @lpfc_cmd for device with SLI-4 interface spec. If we have to
+ * remove the sgl for this scsi buffer then we will do it here. For now
+ * we should be able to just call the sli3 unprep routine.
+ **/
+static void
+lpfc_scsi_unprep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+ lpfc_scsi_unprep_dma_buf_s3(phba, psb);
+}
+
+/**
+ * lpfc_scsi_unprep_dma_buf - Wrapper function for unmap DMA mapping of SG-list
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is going to be un-mapped.
+ *
+ * This routine does DMA un-mapping of scatter gather list of scsi command
+ * field of @lpfc_cmd for device with SLI-4 interface spec.
+ **/
+static void
+lpfc_scsi_unprep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+ phba->lpfc_scsi_unprep_dma_buf(phba, psb);
+}
+
/**
* lpfc_handler_fcp_err - FCP response handler
* @vport: The virtual port for which this call is being executed.
* lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine
* @phba: The Hba for which this call is being executed.
* @pIocbIn: The command IOCBQ for the scsi cmnd.
- * @pIocbOut: The response IOCBQ for the scsi cmnd .
+ * @pIocbOut: The response IOCBQ for the scsi cmnd.
*
* This routine assigns scsi command result by looking into response IOCB
* status field appropriately. This routine handles QUEUE FULL condition as
}
/**
- * lpfc_scsi_prep_cmnd - Routine to convert scsi cmnd to FCP information unit
+ * lpfc_scsi_prep_cmnd_s3 - Convert scsi cmnd to FCP infor unit for SLI3 dev
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: The scsi command which needs to send.
* @pnode: Pointer to lpfc_nodelist.
*
* This routine initializes fcp_cmnd and iocb data structure from scsi command
- * to transfer.
+ * to transfer for device with SLI3 interface spec.
**/
static void
-lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+lpfc_scsi_prep_cmnd_s3(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
struct lpfc_nodelist *pnode)
{
struct lpfc_hba *phba = vport->phba;
if (scsi_sg_count(scsi_cmnd)) {
if (datadir == DMA_TO_DEVICE) {
iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;
- iocb_cmd->un.fcpi.fcpi_parm = 0;
- iocb_cmd->ulpPU = 0;
+ if (phba->sli_rev < LPFC_SLI_REV4) {
+ iocb_cmd->un.fcpi.fcpi_parm = 0;
+ iocb_cmd->ulpPU = 0;
+ } else
+ iocb_cmd->ulpPU = PARM_READ_CHECK;
fcp_cmnd->fcpCntl3 = WRITE_DATA;
phba->fc4OutputRequests++;
} else {
}
/**
- * lpfc_scsi_prep_task_mgmt_cmnd - Convert scsi TM cmnd to FCP information unit
+ * lpfc_scsi_prep_cmnd_s4 - Convert scsi cmnd to FCP infor unit for SLI4 dev
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: The scsi command which needs to send.
+ * @pnode: Pointer to lpfc_nodelist.
+ *
+ * This routine initializes fcp_cmnd and iocb data structure from scsi command
+ * to transfer for device with SLI4 interface spec.
+ **/
+static void
+lpfc_scsi_prep_cmnd_s4(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+ struct lpfc_nodelist *pnode)
+{
+ /*
+ * The prep cmnd routines do not touch the sgl or its
+ * entries. We may not have to do anything different.
+ * I will leave this function in place until we can
+ * run some IO through the driver and determine if changes
+ * are needed.
+ */
+ return lpfc_scsi_prep_cmnd_s3(vport, lpfc_cmd, pnode);
+}
+
+/**
+ * lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: The scsi command which needs to send.
+ * @pnode: Pointer to lpfc_nodelist.
+ *
+ * This routine wraps the actual convert SCSI cmnd function pointer from
+ * the lpfc_hba struct.
+ **/
+static inline void
+lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+ struct lpfc_nodelist *pnode)
+{
+ vport->phba->lpfc_scsi_prep_cmnd(vport, lpfc_cmd, pnode);
+}
+
+/**
+ * lpfc_scsi_prep_task_mgmt_cmnd_s3 - Convert SLI3 scsi TM cmd to FCP info unit
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
* @lun: Logical unit number.
* @task_mgmt_cmd: SCSI task management command.
*
- * This routine creates FCP information unit corresponding to @task_mgmt_cmd.
+ * This routine creates FCP information unit corresponding to @task_mgmt_cmd
+ * for device with SLI-3 interface spec.
*
* Return codes:
* 0 - Error
* 1 - Success
**/
static int
-lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
+lpfc_scsi_prep_task_mgmt_cmd_s3(struct lpfc_vport *vport,
struct lpfc_scsi_buf *lpfc_cmd,
unsigned int lun,
uint8_t task_mgmt_cmd)
return 1;
}
+/**
+ * lpfc_scsi_prep_task_mgmt_cmnd_s4 - Convert SLI4 scsi TM cmd to FCP info unit
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
+ * @lun: Logical unit number.
+ * @task_mgmt_cmd: SCSI task management command.
+ *
+ * This routine creates FCP information unit corresponding to @task_mgmt_cmd
+ * for device with SLI-4 interface spec.
+ *
+ * Return codes:
+ * 0 - Error
+ * 1 - Success
+ **/
+static int
+lpfc_scsi_prep_task_mgmt_cmd_s4(struct lpfc_vport *vport,
+ struct lpfc_scsi_buf *lpfc_cmd,
+ unsigned int lun,
+ uint8_t task_mgmt_cmd)
+{
+ /*
+ * The prep cmnd routines do not touch the sgl or its
+ * entries. We may not have to do anything different.
+ * I will leave this function in place until we can
+ * run some IO through the driver and determine if changes
+ * are needed.
+ */
+ return lpfc_scsi_prep_task_mgmt_cmd_s3(vport, lpfc_cmd, lun,
+ task_mgmt_cmd);
+}
+
+/**
+ * lpfc_scsi_prep_task_mgmt_cmnd - Wrapper func convert scsi TM cmd to FCP info
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
+ * @lun: Logical unit number.
+ * @task_mgmt_cmd: SCSI task management command.
+ *
+ * This routine wraps the actual convert SCSI TM to FCP information unit
+ * function pointer from the lpfc_hba struct.
+ *
+ * Return codes:
+ * 0 - Error
+ * 1 - Success
+ **/
+static inline int
+lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
+ struct lpfc_scsi_buf *lpfc_cmd,
+ unsigned int lun,
+ uint8_t task_mgmt_cmd)
+{
+ struct lpfc_hba *phba = vport->phba;
+
+ return phba->lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun,
+ task_mgmt_cmd);
+}
+
+/**
+ * lpfc_scsi_api_table_setup - Set up scsi api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the SCSI interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+ switch (dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3;
+ phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3;
+ phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s3;
+ phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s3;
+ phba->lpfc_scsi_prep_task_mgmt_cmd =
+ lpfc_scsi_prep_task_mgmt_cmd_s3;
+ phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
+ break;
+ case LPFC_PCI_DEV_OC:
+ phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4;
+ phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4;
+ phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s4;
+ phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s4;
+ phba->lpfc_scsi_prep_task_mgmt_cmd =
+ lpfc_scsi_prep_task_mgmt_cmd_s4;
+ phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1418 Invalid HBA PCI-device group: 0x%x\n",
+ dev_grp);
+ return -ENODEV;
+ break;
+ }
+ phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf;
+ phba->lpfc_rampdown_queue_depth = lpfc_rampdown_queue_depth;
+ return 0;
+}
+
/**
* lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command
* @phba: The Hba for which this call is being executed.
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
"0702 Issue Target Reset to TGT %d Data: x%x x%x\n",
tgt_id, rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag);
- status = lpfc_sli_issue_iocb_wait(phba,
- &phba->sli.ring[phba->sli.fcp_ring],
- iocbq, iocbqrsp, lpfc_cmd->timeout);
+ status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
+ iocbq, iocbqrsp, lpfc_cmd->timeout);
if (status != IOCB_SUCCESS) {
if (status == IOCB_TIMEDOUT) {
iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
struct Scsi_Host *shost = cmnd->device->host;
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
- struct lpfc_sli *psli = &phba->sli;
struct lpfc_rport_data *rdata = cmnd->device->hostdata;
struct lpfc_nodelist *ndlp = rdata->pnode;
struct lpfc_scsi_buf *lpfc_cmd;
lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp);
atomic_inc(&ndlp->cmd_pending);
- err = lpfc_sli_issue_iocb(phba, &phba->sli.ring[psli->fcp_ring],
+ err = lpfc_sli_issue_iocb(phba, LPFC_FCP_RING,
&lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);
if (err) {
atomic_dec(&ndlp->cmd_pending);
struct Scsi_Host *shost = cmnd->device->host;
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
- struct lpfc_sli_ring *pring = &phba->sli.ring[phba->sli.fcp_ring];
struct lpfc_iocbq *iocb;
struct lpfc_iocbq *abtsiocb;
struct lpfc_scsi_buf *lpfc_cmd;
icmd = &abtsiocb->iocb;
icmd->un.acxri.abortType = ABORT_TYPE_ABTS;
icmd->un.acxri.abortContextTag = cmd->ulpContext;
- icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ icmd->un.acxri.abortIoTag = iocb->sli4_xritag;
+ else
+ icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
icmd->ulpLe = 1;
icmd->ulpClass = cmd->ulpClass;
abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
abtsiocb->vport = vport;
- if (lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_FCP_RING, abtsiocb, 0) ==
+ IOCB_ERROR) {
lpfc_sli_release_iocbq(phba, abtsiocb);
ret = FAILED;
goto out;
"0703 Issue target reset to TGT %d LUN %d "
"rpi x%x nlp_flag x%x\n", cmnd->device->id,
cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag);
- status = lpfc_sli_issue_iocb_wait(phba,
- &phba->sli.ring[phba->sli.fcp_ring],
+ status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
iocbq, iocbqrsp, lpfc_cmd->timeout);
if (status == IOCB_TIMEDOUT) {
iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
{
struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
struct lpfc_hba *phba = vport->phba;
- struct lpfc_scsi_buf *scsi_buf = NULL;
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
- uint32_t total = 0, i;
+ uint32_t total = 0;
uint32_t num_to_alloc = 0;
- unsigned long flags;
+ int num_allocated = 0;
if (!rport || fc_remote_port_chkready(rport))
return -ENXIO;
(phba->cfg_hba_queue_depth - total));
num_to_alloc = phba->cfg_hba_queue_depth - total;
}
-
- for (i = 0; i < num_to_alloc; i++) {
- scsi_buf = lpfc_new_scsi_buf(vport);
- if (!scsi_buf) {
- lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
- "0706 Failed to allocate "
- "command buffer\n");
- break;
- }
-
- spin_lock_irqsave(&phba->scsi_buf_list_lock, flags);
- phba->total_scsi_bufs++;
- list_add_tail(&scsi_buf->list, &phba->lpfc_scsi_buf_list);
- spin_unlock_irqrestore(&phba->scsi_buf_list_lock, flags);
+ num_allocated = lpfc_new_scsi_buf(vport, num_to_alloc);
+ if (num_to_alloc != num_allocated) {
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
+ "0708 Allocation request of %d "
+ "command buffers did not succeed. "
+ "Allocated %d buffers.\n",
+ num_to_alloc, num_allocated);
}
return 0;
}
git.openpandora.org / pandora-kernel.git / blobdiff