uint16_t offset = 0;
static char licensed[56] =
"key unlock for use with gnu public licensed code only\0";
+ static int init_key = 1;
pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmb) {
phba->hba_state = LPFC_INIT_MBX_CMDS;
if (lpfc_is_LC_HBA(phba->pcidev->device)) {
- uint32_t *ptext = (uint32_t *) licensed;
+ if (init_key) {
+ uint32_t *ptext = (uint32_t *) licensed;
- for (i = 0; i < 56; i += sizeof (uint32_t), ptext++)
- *ptext = cpu_to_be32(*ptext);
+ for (i = 0; i < 56; i += sizeof (uint32_t), ptext++)
+ *ptext = cpu_to_be32(*ptext);
+ init_key = 0;
+ }
lpfc_read_nv(phba, pmb);
memset((char*)mb->un.varRDnvp.rsvd3, 0,
}
}
- /* This should turn on DELAYED ABTS for ELS timeouts */
- lpfc_set_slim(phba, pmb, 0x052198, 0x1);
- if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
- phba->hba_state = LPFC_HBA_ERROR;
- mempool_free( pmb, phba->mbox_mem_pool);
- return -EIO;
- }
-
-
lpfc_read_config(phba, pmb);
if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
lpfc_printf_log(phba,
}
/* MBOX buffer will be freed in mbox compl */
- i = 0;
+ return (0);
+}
+
+static int
+lpfc_discovery_wait(struct lpfc_hba *phba)
+{
+ int i = 0;
+
while ((phba->hba_state != LPFC_HBA_READY) ||
(phba->num_disc_nodes) || (phba->fc_prli_sent) ||
((phba->fc_map_cnt == 0) && (i<2)) ||
- (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE)) {
+ (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE)) {
/* Check every second for 30 retries. */
i++;
if (i > 30) {
- break;
+ return -ETIMEDOUT;
}
if ((i >= 15) && (phba->hba_state <= LPFC_LINK_DOWN)) {
/* The link is down. Set linkdown timeout */
- break;
+ return -ETIMEDOUT;
}
/* Delay for 1 second to give discovery time to complete. */
}
- /* Since num_disc_nodes keys off of PLOGI, delay a bit to let
- * any potential PRLIs to flush thru the SLI sub-system.
- */
- msleep(50);
-
- return (0);
+ return 0;
}
/************************************************************************/
int max_speed;
char * ports;
char * bus;
- } m;
+ } m = {"<Unknown>", 0, "", ""};
pci_read_config_byte(phba->pcidev, PCI_HEADER_TYPE, &hdrtype);
ports = (hdrtype == 0x80) ? "2-port " : "";
"10-port ", "PCIe"};
break;
default:
- m = (typeof(m)){ 0 };
+ m = (typeof(m)){ NULL };
break;
}
break;
default:
- m = (typeof(m)){ 0 };
+ m = (typeof(m)){ NULL };
break;
}
struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
unsigned long iflag;
- int i = 0;
+ int i;
+ int cnt = 0;
if (!phba)
return 0;
return 0;
psli = &phba->sli;
- pring = &psli->ring[psli->fcp_ring];
lpfc_linkdown(phba);
+ lpfc_sli_flush_mbox_queue(phba);
- /* The linkdown event takes 30 seconds to timeout. */
- while (pring->txcmplq_cnt) {
- mdelay(10);
- if (i++ > 3000)
- break;
+ for (i = 0; i < psli->num_rings; i++) {
+ pring = &psli->ring[i];
+ /* The linkdown event takes 30 seconds to timeout. */
+ while (pring->txcmplq_cnt) {
+ mdelay(10);
+ if (cnt++ > 3000) {
+ lpfc_printf_log(phba,
+ KERN_WARNING, LOG_INIT,
+ "%d:0466 Outstanding IO when "
+ "bringing Adapter offline\n",
+ phba->brd_no);
+ break;
+ }
+ }
}
+
/* stop all timers associated with this hba */
lpfc_stop_timer(phba);
phba->work_hba_events = 0;
+ phba->work_ha = 0;
lpfc_printf_log(phba,
KERN_WARNING,
goto out_put_host;
host->unique_id = phba->brd_no;
- init_MUTEX(&phba->hba_can_block);
INIT_LIST_HEAD(&phba->ctrspbuflist);
INIT_LIST_HEAD(&phba->rnidrspbuflist);
INIT_LIST_HEAD(&phba->freebufList);
goto out_free_iocbq;
}
- /* We can rely on a queue depth attribute only after SLI HBA setup */
+ /*
+ * Set initial can_queue value since 0 is no longer supported and
+ * scsi_add_host will fail. This will be adjusted later based on the
+ * max xri value determined in hba setup.
+ */
host->can_queue = phba->cfg_hba_queue_depth - 10;
/* Tell the midlayer we support 16 byte commands */
error = lpfc_alloc_sysfs_attr(phba);
if (error)
- goto out_kthread_stop;
+ goto out_remove_host;
- error = request_irq(phba->pcidev->irq, lpfc_intr_handler, SA_SHIRQ,
+ error = request_irq(phba->pcidev->irq, lpfc_intr_handler, IRQF_SHARED,
LPFC_DRIVER_NAME, phba);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
error = lpfc_sli_hba_setup(phba);
- if (error)
+ if (error) {
+ error = -ENODEV;
goto out_free_irq;
+ }
+
+ /*
+ * hba setup may have changed the hba_queue_depth so we need to adjust
+ * the value of can_queue.
+ */
+ host->can_queue = phba->cfg_hba_queue_depth - 10;
+
+ lpfc_discovery_wait(phba);
if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
spin_lock_irq(phba->host->host_lock);
free_irq(phba->pcidev->irq, phba);
out_free_sysfs_attr:
lpfc_free_sysfs_attr(phba);
+out_remove_host:
+ fc_remove_host(phba->host);
+ scsi_remove_host(phba->host);
out_kthread_stop:
kthread_stop(phba->worker_thread);
out_free_iocbq:
out_idr_remove:
idr_remove(&lpfc_hba_index, phba->brd_no);
out_put_host:
+ phba->host = NULL;
scsi_host_put(host);
out_release_regions:
pci_release_regions(pdev);
out_disable_device:
pci_disable_device(pdev);
out:
+ pci_set_drvdata(pdev, NULL);
return error;
}