[PATCH] x86-64: Improve error handling for overlapping PXMs in SRAT.

[pandora-kernel.git] / drivers / scsi / libata-core.c

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index f15a07f..5cc53cd 100644 (file)
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1,25 +1,35 @@
 /*
-   libata-core.c - helper library for ATA
-
-   Copyright 2003-2004 Red Hat, Inc.  All rights reserved.
-   Copyright 2003-2004 Jeff Garzik
-
-   The contents of this file are subject to the Open
-   Software License version 1.1 that can be found at
-   http://www.opensource.org/licenses/osl-1.1.txt and is included herein
-   by reference.
-
-   Alternatively, the contents of this file may be used under the terms
-   of the GNU General Public License version 2 (the "GPL") as distributed
-   in the kernel source COPYING file, in which case the provisions of
-   the GPL are applicable instead of the above.  If you wish to allow
-   the use of your version of this file only under the terms of the
-   GPL and not to allow others to use your version of this file under
-   the OSL, indicate your decision by deleting the provisions above and
-   replace them with the notice and other provisions required by the GPL.
-   If you do not delete the provisions above, a recipient may use your
-   version of this file under either the OSL or the GPL.
-
+ *  libata-core.c - helper library for ATA
+ *
+ *  Maintained by:  Jeff Garzik <jgarzik@pobox.com>
+ *                 Please ALWAYS copy linux-ide@vger.kernel.org
+ *                 on emails.
+ *
+ *  Copyright 2003-2004 Red Hat, Inc.  All rights reserved.
+ *  Copyright 2003-2004 Jeff Garzik
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ *  libata documentation is available via 'make {ps|pdf}docs',
+ *  as Documentation/DocBook/libata.*
+ *
+ *  Hardware documentation available from http://www.t13.org/ and
+ *  http://www.sata-io.org/
+ *
  */
 
 #include <linux/config.h>
@@ -65,6 +75,10 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc);
 static unsigned int ata_unique_id = 1;
 static struct workqueue_struct *ata_wq;
 
+int atapi_enabled = 0;
+module_param(atapi_enabled, int, 0444);
+MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
+
 MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("Library module for ATA devices");
 MODULE_LICENSE("GPL");
@@ -2517,7 +2531,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
  *     @ap: port to read/write
  *     @buf: data buffer
  *     @buflen: buffer length
- *     @do_write: read/write
+ *     @write_data: read/write
  *
  *     Transfer data from/to the device data register by MMIO.
  *
@@ -2563,7 +2577,7 @@ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf,
  *     @ap: port to read/write
  *     @buf: data buffer
  *     @buflen: buffer length
- *     @do_write: read/write
+ *     @write_data: read/write
  *
  *     Transfer data from/to the device data register by PIO.
  *
@@ -4190,6 +4204,15 @@ ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port)
 
 
 
+#ifdef CONFIG_PCI
+
+void ata_pci_host_stop (struct ata_host_set *host_set)
+{
+       struct pci_dev *pdev = to_pci_dev(host_set->dev);
+
+       pci_iounmap(pdev, host_set->mmio_base);
+}
+
 /**
  *     ata_pci_init_native_mode - Initialize native-mode driver
  *     @pdev:  pci device to be initialized
@@ -4202,7 +4225,6 @@ ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port)
  *     ata_probe_ent structure should then be freed with kfree().
  */
 
-#ifdef CONFIG_PCI
 struct ata_probe_ent *
 ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port)
 {
@@ -4585,6 +4607,7 @@ EXPORT_SYMBOL_GPL(ata_scsi_simulate);
 
 #ifdef CONFIG_PCI
 EXPORT_SYMBOL_GPL(pci_test_config_bits);
+EXPORT_SYMBOL_GPL(ata_pci_host_stop);
 EXPORT_SYMBOL_GPL(ata_pci_init_native_mode);
 EXPORT_SYMBOL_GPL(ata_pci_init_one);
 EXPORT_SYMBOL_GPL(ata_pci_remove_one);