#include <scsi/scsi_dh.h>
#include <scsi/scsi_device.h>
-#define CLARIION_NAME "emc_clariion"
+#define CLARIION_NAME "emc"
#define CLARIION_TRESPASS_PAGE 0x22
-#define CLARIION_BUFFER_SIZE 0x80
+#define CLARIION_BUFFER_SIZE 0xFC
#define CLARIION_TIMEOUT (60 * HZ)
#define CLARIION_RETRIES 3
#define CLARIION_UNBOUND_LU -1
+#define CLARIION_SP_A 0
+#define CLARIION_SP_B 1
-static unsigned char long_trespass[] = {
- 0, 0, 0, 0,
- CLARIION_TRESPASS_PAGE, /* Page code */
- 0x09, /* Page length - 2 */
- 0x81, /* Trespass code + Honor reservation bit */
- 0xff, 0xff, /* Trespass target */
- 0, 0, 0, 0, 0, 0 /* Reserved bytes / unknown */
-};
+/* Flags */
+#define CLARIION_SHORT_TRESPASS 1
+#define CLARIION_HONOR_RESERVATIONS 2
-static unsigned char long_trespass_hr[] = {
- 0, 0, 0, 0,
+/* LUN states */
+#define CLARIION_LUN_UNINITIALIZED -1
+#define CLARIION_LUN_UNBOUND 0
+#define CLARIION_LUN_BOUND 1
+#define CLARIION_LUN_OWNED 2
+
+static unsigned char long_trespass[] = {
+ 0, 0, 0, 0, 0, 0, 0, 0,
CLARIION_TRESPASS_PAGE, /* Page code */
0x09, /* Page length - 2 */
- 0x01, /* Trespass code + Honor reservation bit */
+ 0x01, /* Trespass code */
0xff, 0xff, /* Trespass target */
0, 0, 0, 0, 0, 0 /* Reserved bytes / unknown */
};
0, 0, 0, 0,
CLARIION_TRESPASS_PAGE, /* Page code */
0x02, /* Page length - 2 */
- 0x81, /* Trespass code + Honor reservation bit */
+ 0x01, /* Trespass code */
0xff, /* Trespass target */
};
-static unsigned char short_trespass_hr[] = {
- 0, 0, 0, 0,
- CLARIION_TRESPASS_PAGE, /* Page code */
- 0x02, /* Page length - 2 */
- 0x01, /* Trespass code + Honor reservation bit */
- 0xff, /* Trespass target */
+static const char * lun_state[] =
+{
+ "not bound",
+ "bound",
+ "owned",
};
struct clariion_dh_data {
/*
+ * Flags:
+ * CLARIION_SHORT_TRESPASS
* Use short trespass command (FC-series) or the long version
* (default for AX/CX CLARiiON arrays).
- */
- unsigned short_trespass;
- /*
+ *
+ * CLARIION_HONOR_RESERVATIONS
* Whether or not (default) to honor SCSI reservations when
* initiating a switch-over.
*/
- unsigned hr;
- /* I/O buffer for both MODE_SELECT and INQUIRY commands. */
+ unsigned flags;
+ /*
+ * I/O buffer for both MODE_SELECT and INQUIRY commands.
+ */
char buffer[CLARIION_BUFFER_SIZE];
/*
* SCSI sense buffer for commands -- assumes serial issuance
* and completion sequence of all commands for same multipath.
*/
unsigned char sense[SCSI_SENSE_BUFFERSIZE];
- /* which SP (A=0,B=1,UNBOUND=-1) is dflt SP for path's mapped dev */
+ unsigned int senselen;
+ /*
+ * LUN state
+ */
+ int lun_state;
+ /*
+ * SP Port number
+ */
+ int port;
+ /*
+ * which SP (A=0,B=1,UNBOUND=-1) is the default SP for this
+ * path's mapped LUN
+ */
int default_sp;
- /* which SP (A=0,B=1,UNBOUND=-1) is active for path's mapped dev */
+ /*
+ * which SP (A=0,B=1,UNBOUND=-1) is the active SP for this
+ * path's mapped LUN
+ */
int current_sp;
};
/*
* Parse MODE_SELECT cmd reply.
*/
-static int trespass_endio(struct scsi_device *sdev, int result)
+static int trespass_endio(struct scsi_device *sdev, char *sense)
{
- int err = SCSI_DH_OK;
+ int err = SCSI_DH_IO;
struct scsi_sense_hdr sshdr;
- struct clariion_dh_data *csdev = get_clariion_data(sdev);
- char *sense = csdev->sense;
- if (status_byte(result) == CHECK_CONDITION &&
- scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr)) {
- sdev_printk(KERN_ERR, sdev, "Found valid sense data 0x%2x, "
+ if (!scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr)) {
+ sdev_printk(KERN_ERR, sdev, "%s: Found valid sense data 0x%2x, "
"0x%2x, 0x%2x while sending CLARiiON trespass "
- "command.\n", sshdr.sense_key, sshdr.asc,
- sshdr.ascq);
+ "command.\n", CLARIION_NAME, sshdr.sense_key,
+ sshdr.asc, sshdr.ascq);
if ((sshdr.sense_key == 0x05) && (sshdr.asc == 0x04) &&
(sshdr.ascq == 0x00)) {
* Array based copy in progress -- do not send
* mode_select or copy will be aborted mid-stream.
*/
- sdev_printk(KERN_INFO, sdev, "Array Based Copy in "
+ sdev_printk(KERN_INFO, sdev, "%s: Array Based Copy in "
"progress while sending CLARiiON trespass "
- "command.\n");
+ "command.\n", CLARIION_NAME);
err = SCSI_DH_DEV_TEMP_BUSY;
} else if ((sshdr.sense_key == 0x02) && (sshdr.asc == 0x04) &&
(sshdr.ascq == 0x03)) {
* LUN Not Ready - Manual Intervention Required
* indicates in-progress ucode upgrade (NDU).
*/
- sdev_printk(KERN_INFO, sdev, "Detected in-progress "
+ sdev_printk(KERN_INFO, sdev, "%s: Detected in-progress "
"ucode upgrade NDU operation while sending "
- "CLARiiON trespass command.\n");
+ "CLARiiON trespass command.\n", CLARIION_NAME);
err = SCSI_DH_DEV_TEMP_BUSY;
} else
err = SCSI_DH_DEV_FAILED;
- } else if (result) {
- sdev_printk(KERN_ERR, sdev, "Error 0x%x while sending "
- "CLARiiON trespass command.\n", result);
- err = SCSI_DH_IO;
+ } else {
+ sdev_printk(KERN_INFO, sdev,
+ "%s: failed to send MODE SELECT, no sense available\n",
+ CLARIION_NAME);
}
-
return err;
}
-static int parse_sp_info_reply(struct scsi_device *sdev, int result,
- int *default_sp, int *current_sp, int *new_current_sp)
+static int parse_sp_info_reply(struct scsi_device *sdev,
+ struct clariion_dh_data *csdev)
{
int err = SCSI_DH_OK;
- struct clariion_dh_data *csdev = get_clariion_data(sdev);
- if (result == 0) {
- /* check for in-progress ucode upgrade (NDU) */
- if (csdev->buffer[48] != 0) {
- sdev_printk(KERN_NOTICE, sdev, "Detected in-progress "
- "ucode upgrade NDU operation while finding "
- "current active SP.");
- err = SCSI_DH_DEV_TEMP_BUSY;
- } else {
- *default_sp = csdev->buffer[5];
-
- if (csdev->buffer[4] == 2)
- /* SP for path is current */
- *current_sp = csdev->buffer[8];
- else {
- if (csdev->buffer[4] == 1)
- /* SP for this path is NOT current */
- if (csdev->buffer[8] == 0)
- *current_sp = 1;
- else
- *current_sp = 0;
- else
- /* unbound LU or LUNZ */
- *current_sp = CLARIION_UNBOUND_LU;
- }
- *new_current_sp = csdev->buffer[8];
- }
- } else {
- struct scsi_sense_hdr sshdr;
-
- err = SCSI_DH_IO;
-
- if (scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
- &sshdr))
- sdev_printk(KERN_ERR, sdev, "Found valid sense data "
- "0x%2x, 0x%2x, 0x%2x while finding current "
- "active SP.", sshdr.sense_key, sshdr.asc,
- sshdr.ascq);
- else
- sdev_printk(KERN_ERR, sdev, "Error 0x%x finding "
- "current active SP.", result);
+ /* check for in-progress ucode upgrade (NDU) */
+ if (csdev->buffer[48] != 0) {
+ sdev_printk(KERN_NOTICE, sdev, "%s: Detected in-progress "
+ "ucode upgrade NDU operation while finding "
+ "current active SP.", CLARIION_NAME);
+ err = SCSI_DH_DEV_TEMP_BUSY;
+ goto out;
+ }
+ if (csdev->buffer[4] < 0 || csdev->buffer[4] > 2) {
+ /* Invalid buffer format */
+ sdev_printk(KERN_NOTICE, sdev,
+ "%s: invalid VPD page 0xC0 format\n",
+ CLARIION_NAME);
+ err = SCSI_DH_NOSYS;
+ goto out;
+ }
+ switch (csdev->buffer[28] & 0x0f) {
+ case 6:
+ sdev_printk(KERN_NOTICE, sdev,
+ "%s: ALUA failover mode detected\n",
+ CLARIION_NAME);
+ break;
+ case 4:
+ /* Linux failover */
+ break;
+ default:
+ sdev_printk(KERN_WARNING, sdev,
+ "%s: Invalid failover mode %d\n",
+ CLARIION_NAME, csdev->buffer[28] & 0x0f);
+ err = SCSI_DH_NOSYS;
+ goto out;
}
+ csdev->default_sp = csdev->buffer[5];
+ csdev->lun_state = csdev->buffer[4];
+ csdev->current_sp = csdev->buffer[8];
+ csdev->port = csdev->buffer[7];
+
+out:
return err;
}
-static int sp_info_endio(struct scsi_device *sdev, int result,
- int mode_select_sent, int *done)
+#define emc_default_str "FC (Legacy)"
+
+static char * parse_sp_model(struct scsi_device *sdev, unsigned char *buffer)
{
- struct clariion_dh_data *csdev = get_clariion_data(sdev);
- int err_flags, default_sp, current_sp, new_current_sp;
+ unsigned char len = buffer[4] + 5;
+ char *sp_model = NULL;
+ unsigned char sp_len, serial_len;
+
+ if (len < 160) {
+ sdev_printk(KERN_WARNING, sdev,
+ "%s: Invalid information section length %d\n",
+ CLARIION_NAME, len);
+ /* Check for old FC arrays */
+ if (!strncmp(buffer + 8, "DGC", 3)) {
+ /* Old FC array, not supporting extended information */
+ sp_model = emc_default_str;
+ }
+ goto out;
+ }
- err_flags = parse_sp_info_reply(sdev, result, &default_sp,
- ¤t_sp, &new_current_sp);
+ /*
+ * Parse extended information for SP model number
+ */
+ serial_len = buffer[160];
+ if (serial_len == 0 || serial_len + 161 > len) {
+ sdev_printk(KERN_WARNING, sdev,
+ "%s: Invalid array serial number length %d\n",
+ CLARIION_NAME, serial_len);
+ goto out;
+ }
+ sp_len = buffer[99];
+ if (sp_len == 0 || serial_len + sp_len + 161 > len) {
+ sdev_printk(KERN_WARNING, sdev,
+ "%s: Invalid model number length %d\n",
+ CLARIION_NAME, sp_len);
+ goto out;
+ }
+ sp_model = &buffer[serial_len + 161];
+ /* Strip whitespace at the end */
+ while (sp_len > 1 && sp_model[sp_len - 1] == ' ')
+ sp_len--;
- if (err_flags != SCSI_DH_OK)
- goto done;
+ sp_model[sp_len] = '\0';
- if (mode_select_sent) {
- csdev->default_sp = default_sp;
- csdev->current_sp = current_sp;
- } else {
- /*
- * Issue the actual module_selec request IFF either
- * (1) we do not know the identity of the current SP OR
- * (2) what we think we know is actually correct.
- */
- if ((current_sp != CLARIION_UNBOUND_LU) &&
- (new_current_sp != current_sp)) {
-
- csdev->default_sp = default_sp;
- csdev->current_sp = current_sp;
-
- sdev_printk(KERN_INFO, sdev, "Ignoring path group "
- "switch-over command for CLARiiON SP%s since "
- " mapped device is already initialized.",
- current_sp ? "B" : "A");
- if (done)
- *done = 1; /* as good as doing it */
- }
- }
-done:
- return err_flags;
+out:
+ return sp_model;
}
/*
-* Get block request for REQ_BLOCK_PC command issued to path. Currently
-* limited to MODE_SELECT (trespass) and INQUIRY (VPD page 0xC0) commands.
-*
-* Uses data and sense buffers in hardware handler context structure and
-* assumes serial servicing of commands, both issuance and completion.
-*/
-static struct request *get_req(struct scsi_device *sdev, int cmd)
+ * Get block request for REQ_BLOCK_PC command issued to path. Currently
+ * limited to MODE_SELECT (trespass) and INQUIRY (VPD page 0xC0) commands.
+ *
+ * Uses data and sense buffers in hardware handler context structure and
+ * assumes serial servicing of commands, both issuance and completion.
+ */
+static struct request *get_req(struct scsi_device *sdev, int cmd,
+ unsigned char *buffer)
{
- struct clariion_dh_data *csdev = get_clariion_data(sdev);
struct request *rq;
- unsigned char *page22;
int len = 0;
rq = blk_get_request(sdev->request_queue,
- (cmd == MODE_SELECT) ? WRITE : READ, GFP_ATOMIC);
+ (cmd == MODE_SELECT) ? WRITE : READ, GFP_NOIO);
if (!rq) {
sdev_printk(KERN_INFO, sdev, "get_req: blk_get_request failed");
return NULL;
}
- memset(&rq->cmd, 0, BLK_MAX_CDB);
+ memset(rq->cmd, 0, BLK_MAX_CDB);
+ rq->cmd_len = COMMAND_SIZE(cmd);
rq->cmd[0] = cmd;
- rq->cmd_len = COMMAND_SIZE(rq->cmd[0]);
switch (cmd) {
case MODE_SELECT:
- if (csdev->short_trespass) {
- page22 = csdev->hr ? short_trespass_hr : short_trespass;
- len = sizeof(short_trespass);
- } else {
- page22 = csdev->hr ? long_trespass_hr : long_trespass;
- len = sizeof(long_trespass);
- }
- /*
- * Can't DMA from kernel BSS -- must copy selected trespass
- * command mode page contents to context buffer which is
- * allocated by kmalloc.
- */
- BUG_ON((len > CLARIION_BUFFER_SIZE));
- memcpy(csdev->buffer, page22, len);
+ len = sizeof(short_trespass);
+ rq->cmd_flags |= REQ_RW;
+ rq->cmd[1] = 0x10;
+ break;
+ case MODE_SELECT_10:
+ len = sizeof(long_trespass);
rq->cmd_flags |= REQ_RW;
rq->cmd[1] = 0x10;
break;
case INQUIRY:
- rq->cmd[1] = 0x1;
- rq->cmd[2] = 0xC0;
len = CLARIION_BUFFER_SIZE;
- memset(csdev->buffer, 0, CLARIION_BUFFER_SIZE);
+ memset(buffer, 0, len);
break;
default:
BUG_ON(1);
rq->timeout = CLARIION_TIMEOUT;
rq->retries = CLARIION_RETRIES;
- rq->sense = csdev->sense;
- memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
- rq->sense_len = 0;
-
- if (blk_rq_map_kern(sdev->request_queue, rq, csdev->buffer,
- len, GFP_ATOMIC)) {
- __blk_put_request(rq->q, rq);
+ if (blk_rq_map_kern(rq->q, rq, buffer, len, GFP_NOIO)) {
+ blk_put_request(rq);
return NULL;
}
return rq;
}
-static int send_cmd(struct scsi_device *sdev, int cmd)
+static int send_inquiry_cmd(struct scsi_device *sdev, int page,
+ struct clariion_dh_data *csdev)
{
- struct request *rq = get_req(sdev, cmd);
+ struct request *rq = get_req(sdev, INQUIRY, csdev->buffer);
+ int err;
if (!rq)
return SCSI_DH_RES_TEMP_UNAVAIL;
- return blk_execute_rq(sdev->request_queue, NULL, rq, 1);
+ rq->sense = csdev->sense;
+ memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+ rq->sense_len = csdev->senselen = 0;
+
+ rq->cmd[0] = INQUIRY;
+ if (page != 0) {
+ rq->cmd[1] = 1;
+ rq->cmd[2] = page;
+ }
+ err = blk_execute_rq(sdev->request_queue, NULL, rq, 1);
+ if (err == -EIO) {
+ sdev_printk(KERN_INFO, sdev,
+ "%s: failed to send %s INQUIRY: %x\n",
+ CLARIION_NAME, page?"EVPD":"standard",
+ rq->errors);
+ csdev->senselen = rq->sense_len;
+ err = SCSI_DH_IO;
+ }
+
+ blk_put_request(rq);
+
+ return err;
}
-static int clariion_activate(struct scsi_device *sdev)
+static int send_trespass_cmd(struct scsi_device *sdev,
+ struct clariion_dh_data *csdev)
{
- int result, done = 0;
+ struct request *rq;
+ unsigned char *page22;
+ int err, len, cmd;
+
+ if (csdev->flags & CLARIION_SHORT_TRESPASS) {
+ page22 = short_trespass;
+ if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
+ /* Set Honor Reservations bit */
+ page22[6] |= 0x80;
+ len = sizeof(short_trespass);
+ cmd = MODE_SELECT;
+ } else {
+ page22 = long_trespass;
+ if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
+ /* Set Honor Reservations bit */
+ page22[10] |= 0x80;
+ len = sizeof(long_trespass);
+ cmd = MODE_SELECT_10;
+ }
+ BUG_ON((len > CLARIION_BUFFER_SIZE));
+ memcpy(csdev->buffer, page22, len);
- result = send_cmd(sdev, INQUIRY);
- result = sp_info_endio(sdev, result, 0, &done);
- if (result || done)
- goto done;
+ rq = get_req(sdev, cmd, csdev->buffer);
+ if (!rq)
+ return SCSI_DH_RES_TEMP_UNAVAIL;
- result = send_cmd(sdev, MODE_SELECT);
- result = trespass_endio(sdev, result);
- if (result)
- goto done;
+ rq->sense = csdev->sense;
+ memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+ rq->sense_len = csdev->senselen = 0;
- result = send_cmd(sdev, INQUIRY);
- result = sp_info_endio(sdev, result, 1, NULL);
-done:
- return result;
+ err = blk_execute_rq(sdev->request_queue, NULL, rq, 1);
+ if (err == -EIO) {
+ if (rq->sense_len) {
+ err = trespass_endio(sdev, csdev->sense);
+ } else {
+ sdev_printk(KERN_INFO, sdev,
+ "%s: failed to send MODE SELECT: %x\n",
+ CLARIION_NAME, rq->errors);
+ }
+ }
+
+ blk_put_request(rq);
+
+ return err;
}
static int clariion_check_sense(struct scsi_device *sdev,
* Unit Attention Code. This is the first IO
* to the new path, so just retry.
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
break;
}
- /* success just means we do not care what scsi-ml does */
- return SUCCESS;
+ return SCSI_RETURN_NOT_HANDLED;
+}
+
+static int clariion_prep_fn(struct scsi_device *sdev, struct request *req)
+{
+ struct clariion_dh_data *h = get_clariion_data(sdev);
+ int ret = BLKPREP_OK;
+
+ if (h->lun_state != CLARIION_LUN_OWNED) {
+ ret = BLKPREP_KILL;
+ req->cmd_flags |= REQ_QUIET;
+ }
+ return ret;
+
+}
+
+static int clariion_std_inquiry(struct scsi_device *sdev,
+ struct clariion_dh_data *csdev)
+{
+ int err;
+ char *sp_model;
+
+ err = send_inquiry_cmd(sdev, 0, csdev);
+ if (err != SCSI_DH_OK && csdev->senselen) {
+ struct scsi_sense_hdr sshdr;
+
+ if (scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
+ &sshdr)) {
+ sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code "
+ "%02x/%02x/%02x\n", CLARIION_NAME,
+ sshdr.sense_key, sshdr.asc, sshdr.ascq);
+ }
+ err = SCSI_DH_IO;
+ goto out;
+ }
+
+ sp_model = parse_sp_model(sdev, csdev->buffer);
+ if (!sp_model) {
+ err = SCSI_DH_DEV_UNSUPP;
+ goto out;
+ }
+
+ /*
+ * FC Series arrays do not support long trespass
+ */
+ if (!strlen(sp_model) || !strncmp(sp_model, "FC",2))
+ csdev->flags |= CLARIION_SHORT_TRESPASS;
+
+ sdev_printk(KERN_INFO, sdev,
+ "%s: detected Clariion %s, flags %x\n",
+ CLARIION_NAME, sp_model, csdev->flags);
+out:
+ return err;
}
-static const struct {
- char *vendor;
- char *model;
-} clariion_dev_list[] = {
+static int clariion_send_inquiry(struct scsi_device *sdev,
+ struct clariion_dh_data *csdev)
+{
+ int err, retry = CLARIION_RETRIES;
+
+retry:
+ err = send_inquiry_cmd(sdev, 0xC0, csdev);
+ if (err != SCSI_DH_OK && csdev->senselen) {
+ struct scsi_sense_hdr sshdr;
+
+ err = scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
+ &sshdr);
+ if (!err)
+ return SCSI_DH_IO;
+
+ err = clariion_check_sense(sdev, &sshdr);
+ if (retry > 0 && err == ADD_TO_MLQUEUE) {
+ retry--;
+ goto retry;
+ }
+ sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code "
+ "%02x/%02x/%02x\n", CLARIION_NAME,
+ sshdr.sense_key, sshdr.asc, sshdr.ascq);
+ err = SCSI_DH_IO;
+ } else {
+ err = parse_sp_info_reply(sdev, csdev);
+ }
+ return err;
+}
+
+static int clariion_activate(struct scsi_device *sdev)
+{
+ struct clariion_dh_data *csdev = get_clariion_data(sdev);
+ int result;
+
+ result = clariion_send_inquiry(sdev, csdev);
+ if (result != SCSI_DH_OK)
+ goto done;
+
+ if (csdev->lun_state == CLARIION_LUN_OWNED)
+ goto done;
+
+ result = send_trespass_cmd(sdev, csdev);
+ if (result != SCSI_DH_OK)
+ goto done;
+ sdev_printk(KERN_INFO, sdev,"%s: %s trespass command sent\n",
+ CLARIION_NAME,
+ csdev->flags&CLARIION_SHORT_TRESPASS?"short":"long" );
+
+ /* Update status */
+ result = clariion_send_inquiry(sdev, csdev);
+ if (result != SCSI_DH_OK)
+ goto done;
+
+done:
+ sdev_printk(KERN_INFO, sdev,
+ "%s: at SP %c Port %d (%s, default SP %c)\n",
+ CLARIION_NAME, csdev->current_sp + 'A',
+ csdev->port, lun_state[csdev->lun_state],
+ csdev->default_sp + 'A');
+
+ return result;
+}
+
+static const struct scsi_dh_devlist clariion_dev_list[] = {
{"DGC", "RAID"},
{"DGC", "DISK"},
+ {"DGC", "VRAID"},
{NULL, NULL},
};
-static int clariion_bus_notify(struct notifier_block *, unsigned long, void *);
+static int clariion_bus_attach(struct scsi_device *sdev);
+static void clariion_bus_detach(struct scsi_device *sdev);
static struct scsi_device_handler clariion_dh = {
.name = CLARIION_NAME,
.module = THIS_MODULE,
- .nb.notifier_call = clariion_bus_notify,
+ .devlist = clariion_dev_list,
+ .attach = clariion_bus_attach,
+ .detach = clariion_bus_detach,
.check_sense = clariion_check_sense,
.activate = clariion_activate,
+ .prep_fn = clariion_prep_fn,
};
/*
* TODO: need some interface so we can set trespass values
*/
-static int clariion_bus_notify(struct notifier_block *nb,
- unsigned long action, void *data)
+static int clariion_bus_attach(struct scsi_device *sdev)
{
- struct device *dev = data;
- struct scsi_device *sdev;
struct scsi_dh_data *scsi_dh_data;
struct clariion_dh_data *h;
- int i, found = 0;
unsigned long flags;
+ int err;
- if (!scsi_is_sdev_device(dev))
- return 0;
+ scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
+ + sizeof(*h) , GFP_KERNEL);
+ if (!scsi_dh_data) {
+ sdev_printk(KERN_ERR, sdev, "%s: Attach failed\n",
+ CLARIION_NAME);
+ return -ENOMEM;
+ }
- sdev = to_scsi_device(dev);
+ scsi_dh_data->scsi_dh = &clariion_dh;
+ h = (struct clariion_dh_data *) scsi_dh_data->buf;
+ h->lun_state = CLARIION_LUN_UNINITIALIZED;
+ h->default_sp = CLARIION_UNBOUND_LU;
+ h->current_sp = CLARIION_UNBOUND_LU;
- if (action == BUS_NOTIFY_ADD_DEVICE) {
- for (i = 0; clariion_dev_list[i].vendor; i++) {
- if (!strncmp(sdev->vendor, clariion_dev_list[i].vendor,
- strlen(clariion_dev_list[i].vendor)) &&
- !strncmp(sdev->model, clariion_dev_list[i].model,
- strlen(clariion_dev_list[i].model))) {
- found = 1;
- break;
- }
- }
- if (!found)
- goto out;
-
- scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
- + sizeof(*h) , GFP_KERNEL);
- if (!scsi_dh_data) {
- sdev_printk(KERN_ERR, sdev, "Attach failed %s.\n",
- CLARIION_NAME);
- goto out;
- }
+ err = clariion_std_inquiry(sdev, h);
+ if (err != SCSI_DH_OK)
+ goto failed;
- scsi_dh_data->scsi_dh = &clariion_dh;
- h = (struct clariion_dh_data *) scsi_dh_data->buf;
- h->default_sp = CLARIION_UNBOUND_LU;
- h->current_sp = CLARIION_UNBOUND_LU;
+ err = clariion_send_inquiry(sdev, h);
+ if (err != SCSI_DH_OK)
+ goto failed;
- spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
- sdev->scsi_dh_data = scsi_dh_data;
- spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+ if (!try_module_get(THIS_MODULE))
+ goto failed;
- sdev_printk(KERN_NOTICE, sdev, "Attached %s.\n", CLARIION_NAME);
- try_module_get(THIS_MODULE);
+ spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+ sdev->scsi_dh_data = scsi_dh_data;
+ spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
- } else if (action == BUS_NOTIFY_DEL_DEVICE) {
- if (sdev->scsi_dh_data == NULL ||
- sdev->scsi_dh_data->scsi_dh != &clariion_dh)
- goto out;
+ sdev_printk(KERN_INFO, sdev,
+ "%s: connected to SP %c Port %d (%s, default SP %c)\n",
+ CLARIION_NAME, h->current_sp + 'A',
+ h->port, lun_state[h->lun_state],
+ h->default_sp + 'A');
- spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
- scsi_dh_data = sdev->scsi_dh_data;
- sdev->scsi_dh_data = NULL;
- spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+ return 0;
- sdev_printk(KERN_NOTICE, sdev, "Dettached %s.\n",
- CLARIION_NAME);
+failed:
+ kfree(scsi_dh_data);
+ sdev_printk(KERN_ERR, sdev, "%s: not attached\n",
+ CLARIION_NAME);
+ return -EINVAL;
+}
- kfree(scsi_dh_data);
- module_put(THIS_MODULE);
- }
+static void clariion_bus_detach(struct scsi_device *sdev)
+{
+ struct scsi_dh_data *scsi_dh_data;
+ unsigned long flags;
-out:
- return 0;
+ spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+ scsi_dh_data = sdev->scsi_dh_data;
+ sdev->scsi_dh_data = NULL;
+ spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+
+ sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n",
+ CLARIION_NAME);
+
+ kfree(scsi_dh_data);
+ module_put(THIS_MODULE);
}
static int __init clariion_init(void)
r = scsi_register_device_handler(&clariion_dh);
if (r != 0)
- printk(KERN_ERR "Failed to register scsi device handler.");
+ printk(KERN_ERR "%s: Failed to register scsi device handler.",
+ CLARIION_NAME);
return r;
}
git.openpandora.org / pandora-kernel.git / blobdiff