*/
#include <linux/rtc.h>
+#include <linux/log2.h>
int rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm)
{
}
EXPORT_SYMBOL_GPL(rtc_set_mmss);
-int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
+static int rtc_read_alarm_internal(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
{
int err;
mutex_unlock(&rtc->ops_lock);
return err;
}
+
+int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
+{
+ int err;
+ struct rtc_time before, now;
+ int first_time = 1;
+
+ /* The lower level RTC driver may not be capable of filling
+ * in all fields of the rtc_time struct (eg. rtc-cmos),
+ * and so might instead return -1 in some fields.
+ * We deal with that here by grabbing a current RTC timestamp
+ * and using values from that for any missing (-1) values.
+ *
+ * But this can be racey, because some fields of the RTC timestamp
+ * may have wrapped in the interval since we read the RTC alarm,
+ * which would lead to us inserting inconsistent values in place
+ * of the -1 fields.
+ *
+ * Reading the alarm and timestamp in the reverse sequence
+ * would have the same race condition, and not solve the issue.
+ *
+ * So, we must first read the RTC timestamp,
+ * then read the RTC alarm value,
+ * and then read a second RTC timestamp.
+ *
+ * If any fields of the second timestamp have changed
+ * when compared with the first timestamp, then we know
+ * our timestamp may be inconsistent with that used by
+ * the low-level rtc_read_alarm_internal() function.
+ *
+ * So, when the two timestamps disagree, we just loop and do
+ * the process again to get a fully consistent set of values.
+ *
+ * This could all instead be done in the lower level driver,
+ * but since more than one lower level RTC implementation needs it,
+ * then it's probably best best to do it here instead of there..
+ */
+
+ /* Get the "before" timestamp */
+ err = rtc_read_time(rtc, &before);
+ if (err < 0)
+ return err;
+ do {
+ if (!first_time)
+ memcpy(&before, &now, sizeof(struct rtc_time));
+ first_time = 0;
+
+ /* get the RTC alarm values, which may be incomplete */
+ err = rtc_read_alarm_internal(rtc, alarm);
+ if (err)
+ return err;
+ if (!alarm->enabled)
+ return 0;
+
+ /* get the "after" timestamp, to detect wrapped fields */
+ err = rtc_read_time(rtc, &now);
+ if (err < 0)
+ return err;
+
+ /* note that tm_sec is a "don't care" value here: */
+ } while ( before.tm_min != now.tm_min
+ || before.tm_hour != now.tm_hour
+ || before.tm_mon != now.tm_mon
+ || before.tm_year != now.tm_year
+ || before.tm_isdst != now.tm_isdst);
+
+ /* Fill in any missing alarm fields using the timestamp */
+ if (alarm->time.tm_sec == -1)
+ alarm->time.tm_sec = now.tm_sec;
+ if (alarm->time.tm_min == -1)
+ alarm->time.tm_min = now.tm_min;
+ if (alarm->time.tm_hour == -1)
+ alarm->time.tm_hour = now.tm_hour;
+ if (alarm->time.tm_mday == -1)
+ alarm->time.tm_mday = now.tm_mday;
+ if (alarm->time.tm_mon == -1)
+ alarm->time.tm_mon = now.tm_mon;
+ if (alarm->time.tm_year == -1)
+ alarm->time.tm_year = now.tm_year;
+ return 0;
+}
EXPORT_SYMBOL_GPL(rtc_read_alarm);
int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
}
EXPORT_SYMBOL_GPL(rtc_update_irq);
+static int __rtc_match(struct device *dev, void *data)
+{
+ char *name = (char *)data;
+
+ if (strncmp(dev->bus_id, name, BUS_ID_SIZE) == 0)
+ return 1;
+ return 0;
+}
+
struct rtc_device *rtc_class_open(char *name)
{
struct device *dev;
struct rtc_device *rtc = NULL;
- down(&rtc_class->sem);
- list_for_each_entry(dev, &rtc_class->devices, node) {
- if (strncmp(dev->bus_id, name, BUS_ID_SIZE) == 0) {
- dev = get_device(dev);
- if (dev)
- rtc = to_rtc_device(dev);
- break;
- }
- }
+ dev = class_find_device(rtc_class, name, __rtc_match);
+ if (dev)
+ rtc = to_rtc_device(dev);
if (rtc) {
if (!try_module_get(rtc->owner)) {
rtc = NULL;
}
}
- up(&rtc_class->sem);
return rtc;
}
if (task == NULL || task->func == NULL)
return -EINVAL;
+ /* Cannot register while the char dev is in use */
+ if (test_and_set_bit_lock(RTC_DEV_BUSY, &rtc->flags))
+ return -EBUSY;
+
spin_lock_irq(&rtc->irq_task_lock);
if (rtc->irq_task == NULL) {
rtc->irq_task = task;
}
spin_unlock_irq(&rtc->irq_task_lock);
+ clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags);
+
return retval;
}
EXPORT_SYMBOL_GPL(rtc_irq_register);
void rtc_irq_unregister(struct rtc_device *rtc, struct rtc_task *task)
{
-
spin_lock_irq(&rtc->irq_task_lock);
if (rtc->irq_task == task)
rtc->irq_task = NULL;
}
EXPORT_SYMBOL_GPL(rtc_irq_unregister);
+/**
+ * rtc_irq_set_state - enable/disable 2^N Hz periodic IRQs
+ * @rtc: the rtc device
+ * @task: currently registered with rtc_irq_register()
+ * @enabled: true to enable periodic IRQs
+ * Context: any
+ *
+ * Note that rtc_irq_set_freq() should previously have been used to
+ * specify the desired frequency of periodic IRQ task->func() callbacks.
+ */
int rtc_irq_set_state(struct rtc_device *rtc, struct rtc_task *task, int enabled)
{
int err = 0;
return -ENXIO;
spin_lock_irqsave(&rtc->irq_task_lock, flags);
+ if (rtc->irq_task != NULL && task == NULL)
+ err = -EBUSY;
if (rtc->irq_task != task)
- err = -ENXIO;
+ err = -EACCES;
spin_unlock_irqrestore(&rtc->irq_task_lock, flags);
if (err == 0)
}
EXPORT_SYMBOL_GPL(rtc_irq_set_state);
+/**
+ * rtc_irq_set_freq - set 2^N Hz periodic IRQ frequency for IRQ
+ * @rtc: the rtc device
+ * @task: currently registered with rtc_irq_register()
+ * @freq: positive frequency with which task->func() will be called
+ * Context: any
+ *
+ * Note that rtc_irq_set_state() is used to enable or disable the
+ * periodic IRQs.
+ */
int rtc_irq_set_freq(struct rtc_device *rtc, struct rtc_task *task, int freq)
{
int err = 0;
if (rtc->ops->irq_set_freq == NULL)
return -ENXIO;
+ if (!is_power_of_2(freq))
+ return -EINVAL;
+
spin_lock_irqsave(&rtc->irq_task_lock, flags);
+ if (rtc->irq_task != NULL && task == NULL)
+ err = -EBUSY;
if (rtc->irq_task != task)
- err = -ENXIO;
+ err = -EACCES;
spin_unlock_irqrestore(&rtc->irq_task_lock, flags);
if (err == 0) {
git.openpandora.org / pandora-kernel.git / blobdiff