static LIST_HEAD(regulator_list);
static LIST_HEAD(regulator_map_list);
-/*
- * struct regulator_dev
- *
- * Voltage / Current regulator class device. One for each regulator.
- */
-struct regulator_dev {
- struct regulator_desc *desc;
- int use_count;
-
- /* lists we belong to */
- struct list_head list; /* list of all regulators */
- struct list_head slist; /* list of supplied regulators */
-
- /* lists we own */
- struct list_head consumer_list; /* consumers we supply */
- struct list_head supply_list; /* regulators we supply */
-
- struct blocking_notifier_head notifier;
- struct mutex mutex; /* consumer lock */
- struct module *owner;
- struct device dev;
- struct regulation_constraints *constraints;
- struct regulator_dev *supply; /* for tree */
-
- void *reg_data; /* regulator_dev data */
-};
-
/*
* struct regulator_map
*
}
static DEVICE_ATTR(state, 0444, regulator_state_show, NULL);
+static ssize_t regulator_status_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
+ int status;
+ char *label;
+
+ status = rdev->desc->ops->get_status(rdev);
+ if (status < 0)
+ return status;
+
+ switch (status) {
+ case REGULATOR_STATUS_OFF:
+ label = "off";
+ break;
+ case REGULATOR_STATUS_ON:
+ label = "on";
+ break;
+ case REGULATOR_STATUS_ERROR:
+ label = "error";
+ break;
+ case REGULATOR_STATUS_FAST:
+ label = "fast";
+ break;
+ case REGULATOR_STATUS_NORMAL:
+ label = "normal";
+ break;
+ case REGULATOR_STATUS_IDLE:
+ label = "idle";
+ break;
+ case REGULATOR_STATUS_STANDBY:
+ label = "standby";
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ return sprintf(buf, "%s\n", label);
+}
+static DEVICE_ATTR(status, 0444, regulator_status_show, NULL);
+
static ssize_t regulator_min_uA_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
else
name = "regulator";
+ /* constrain machine-level voltage specs to fit
+ * the actual range supported by this regulator.
+ */
+ if (ops->list_voltage && rdev->desc->n_voltages) {
+ int count = rdev->desc->n_voltages;
+ int i;
+ int min_uV = INT_MAX;
+ int max_uV = INT_MIN;
+ int cmin = constraints->min_uV;
+ int cmax = constraints->max_uV;
+
+ /* it's safe to autoconfigure fixed-voltage supplies */
+ if (count == 1 && !cmin) {
+ cmin = INT_MIN;
+ cmax = INT_MAX;
+ }
+
+ /* voltage constraints are optional */
+ if ((cmin == 0) && (cmax == 0))
+ goto out;
+
+ /* else require explicit machine-level constraints */
+ if (cmin <= 0 || cmax <= 0 || cmax < cmin) {
+ pr_err("%s: %s '%s' voltage constraints\n",
+ __func__, "invalid", name);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* initial: [cmin..cmax] valid, [min_uV..max_uV] not */
+ for (i = 0; i < count; i++) {
+ int value;
+
+ value = ops->list_voltage(rdev, i);
+ if (value <= 0)
+ continue;
+
+ /* maybe adjust [min_uV..max_uV] */
+ if (value >= cmin && value < min_uV)
+ min_uV = value;
+ if (value <= cmax && value > max_uV)
+ max_uV = value;
+ }
+
+ /* final: [min_uV..max_uV] valid iff constraints valid */
+ if (max_uV < min_uV) {
+ pr_err("%s: %s '%s' voltage constraints\n",
+ __func__, "unsupportable", name);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* use regulator's subset of machine constraints */
+ if (constraints->min_uV < min_uV) {
+ pr_debug("%s: override '%s' %s, %d -> %d\n",
+ __func__, name, "min_uV",
+ constraints->min_uV, min_uV);
+ constraints->min_uV = min_uV;
+ }
+ if (constraints->max_uV > max_uV) {
+ pr_debug("%s: override '%s' %s, %d -> %d\n",
+ __func__, name, "max_uV",
+ constraints->max_uV, max_uV);
+ constraints->max_uV = max_uV;
+ }
+ }
+
rdev->constraints = constraints;
/* do we need to apply the constraint voltage */
}
}
- /* are we enabled at boot time by firmware / bootloader */
- if (rdev->constraints->boot_on)
- rdev->use_count = 1;
-
/* do we need to setup our suspend state */
if (constraints->initial_state) {
ret = suspend_prepare(rdev, constraints->initial_state);
}
}
- /* if always_on is set then turn the regulator on if it's not
- * already on. */
- if (constraints->always_on && ops->enable &&
- ((ops->is_enabled && !ops->is_enabled(rdev)) ||
- (!ops->is_enabled && !constraints->boot_on))) {
+ if (constraints->initial_mode) {
+ if (!ops->set_mode) {
+ printk(KERN_ERR "%s: no set_mode operation for %s\n",
+ __func__, name);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = ops->set_mode(rdev, constraints->initial_mode);
+ if (ret < 0) {
+ printk(KERN_ERR
+ "%s: failed to set initial mode for %s: %d\n",
+ __func__, name, ret);
+ goto out;
+ }
+ }
+
+ /* If the constraints say the regulator should be on at this point
+ * and we have control then make sure it is enabled.
+ */
+ if ((constraints->always_on || constraints->boot_on) && ops->enable) {
ret = ops->enable(rdev);
if (ret < 0) {
printk(KERN_ERR "%s: failed to enable %s\n",
}
}
+static void unset_regulator_supplies(struct regulator_dev *rdev)
+{
+ struct regulator_map *node, *n;
+
+ list_for_each_entry_safe(node, n, ®ulator_map_list, list) {
+ if (rdev == node->regulator) {
+ list_del(&node->list);
+ kfree(node);
+ return;
+ }
+ }
+}
+
#define REG_STR_SIZE 32
static struct regulator *create_regulator(struct regulator_dev *rdev,
* @id: Supply name or regulator ID.
*
* Returns a struct regulator corresponding to the regulator producer,
- * or IS_ERR() condition containing errno. Use of supply names
- * configured via regulator_set_device_supply() is strongly
- * encouraged.
+ * or IS_ERR() condition containing errno.
+ *
+ * Use of supply names configured via regulator_set_device_supply() is
+ * strongly encouraged. It is recommended that the supply name used
+ * should match the name used for the supply and/or the relevant
+ * device pins in the datasheet.
*/
struct regulator *regulator_get(struct device *dev, const char *id)
{
goto found;
}
}
- printk(KERN_ERR "regulator: Unable to get requested regulator: %s\n",
- id);
mutex_unlock(®ulator_list_mutex);
return regulator;
}
EXPORT_SYMBOL_GPL(regulator_is_enabled);
+/**
+ * regulator_count_voltages - count regulator_list_voltage() selectors
+ * @regulator: regulator source
+ *
+ * Returns number of selectors, or negative errno. Selectors are
+ * numbered starting at zero, and typically correspond to bitfields
+ * in hardware registers.
+ */
+int regulator_count_voltages(struct regulator *regulator)
+{
+ struct regulator_dev *rdev = regulator->rdev;
+
+ return rdev->desc->n_voltages ? : -EINVAL;
+}
+EXPORT_SYMBOL_GPL(regulator_count_voltages);
+
+/**
+ * regulator_list_voltage - enumerate supported voltages
+ * @regulator: regulator source
+ * @selector: identify voltage to list
+ * Context: can sleep
+ *
+ * Returns a voltage that can be passed to @regulator_set_voltage(),
+ * zero if this selector code can't be used on this sytem, or a
+ * negative errno.
+ */
+int regulator_list_voltage(struct regulator *regulator, unsigned selector)
+{
+ struct regulator_dev *rdev = regulator->rdev;
+ struct regulator_ops *ops = rdev->desc->ops;
+ int ret;
+
+ if (!ops->list_voltage || selector >= rdev->desc->n_voltages)
+ return -EINVAL;
+
+ mutex_lock(&rdev->mutex);
+ ret = ops->list_voltage(rdev, selector);
+ mutex_unlock(&rdev->mutex);
+
+ if (ret > 0) {
+ if (ret < rdev->constraints->min_uV)
+ ret = 0;
+ else if (ret > rdev->constraints->max_uV)
+ ret = 0;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_list_voltage);
+
/**
* regulator_set_voltage - set regulator output voltage
* @regulator: regulator source
ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV);
out:
+ _notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE, NULL);
mutex_unlock(&rdev->mutex);
return ret;
}
}
EXPORT_SYMBOL_GPL(regulator_unregister_notifier);
-/* notify regulator consumers and downstream regulator consumers */
+/* notify regulator consumers and downstream regulator consumers.
+ * Note mutex must be held by caller.
+ */
static void _notifier_call_chain(struct regulator_dev *rdev,
unsigned long event, void *data)
{
struct regulator_dev *_rdev;
/* call rdev chain first */
- mutex_lock(&rdev->mutex);
blocking_notifier_call_chain(&rdev->notifier, event, NULL);
- mutex_unlock(&rdev->mutex);
/* now notify regulator we supply */
- list_for_each_entry(_rdev, &rdev->supply_list, slist)
- _notifier_call_chain(_rdev, event, data);
+ list_for_each_entry(_rdev, &rdev->supply_list, slist) {
+ mutex_lock(&_rdev->mutex);
+ _notifier_call_chain(_rdev, event, data);
+ mutex_unlock(&_rdev->mutex);
+ }
}
/**
*
* Called by regulator drivers to notify clients a regulator event has
* occurred. We also notify regulator clients downstream.
+ * Note lock must be held by caller.
*/
int regulator_notifier_call_chain(struct regulator_dev *rdev,
unsigned long event, void *data)
if (status < 0)
return status;
}
+ if (ops->get_status) {
+ status = device_create_file(dev, &dev_attr_status);
+ if (status < 0)
+ return status;
+ }
/* some attributes are type-specific */
if (rdev->desc->type == REGULATOR_CURRENT) {
* regulator_register - register regulator
* @regulator_desc: regulator to register
* @dev: struct device for the regulator
+ * @init_data: platform provided init data, passed through by driver
* @driver_data: private regulator data
*
* Called by regulator drivers to register a regulator.
* Returns 0 on success.
*/
struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
- struct device *dev, void *driver_data)
+ struct device *dev, struct regulator_init_data *init_data,
+ void *driver_data)
{
static atomic_t regulator_no = ATOMIC_INIT(0);
struct regulator_dev *rdev;
- struct regulator_init_data *init_data = dev->platform_data;
int ret, i;
if (regulator_desc == NULL)
return;
mutex_lock(®ulator_list_mutex);
+ unset_regulator_supplies(rdev);
list_del(&rdev->list);
if (rdev->supply)
sysfs_remove_link(&rdev->dev.kobj, "supply");
git.openpandora.org / pandora-kernel.git / blobdiff