#include <linux/dmi.h>
#include <linux/pci-aspm.h>
#include <linux/ioport.h>
+#include <linux/mm.h>
#include <asm/dma.h> /* isa_dma_bridge_buggy */
#include "pci.h"
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_citrine);
+/* On IBM Crocodile ipr SAS adapters, expand BAR to system page size */
+static void quirk_extend_bar_to_page(struct pci_dev *dev)
+{
+ int i;
+
+ for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
+ struct resource *r = &dev->resource[i];
+
+ if (r->flags & IORESOURCE_MEM && resource_size(r) < PAGE_SIZE) {
+ r->end = PAGE_SIZE - 1;
+ r->start = 0;
+ r->flags |= IORESOURCE_UNSET;
+ dev_info(&dev->dev, "expanded BAR %d to page size: %pR\n",
+ i, r);
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, 0x034a, quirk_extend_bar_to_page);
+
/*
* S3 868 and 968 chips report region size equal to 32M, but they decode 64M.
* If it's needed, re-allocate the region.
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M);
+static void quirk_io(struct pci_dev *dev, int pos, unsigned size,
+ const char *name)
+{
+ u32 region;
+ struct pci_bus_region bus_region;
+ struct resource *res = dev->resource + pos;
+
+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + (pos << 2), ®ion);
+
+ if (!region)
+ return;
+
+ res->name = pci_name(dev);
+ res->flags = region & ~PCI_BASE_ADDRESS_IO_MASK;
+ res->flags |=
+ (IORESOURCE_IO | IORESOURCE_PCI_FIXED | IORESOURCE_SIZEALIGN);
+ region &= ~(size - 1);
+
+ /* Convert from PCI bus to resource space */
+ bus_region.start = region;
+ bus_region.end = region + size - 1;
+ pcibios_bus_to_resource(dev, res, &bus_region);
+
+ dev_info(&dev->dev, FW_BUG "%s quirk: reg 0x%x: %pR\n",
+ name, PCI_BASE_ADDRESS_0 + (pos << 2), res);
+}
+
/*
* Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS
* ver. 1.33 20070103) don't set the correct ISA PCI region header info.
* BAR0 should be 8 bytes; instead, it may be set to something like 8k
* (which conflicts w/ BAR1's memory range).
+ *
+ * CS553x's ISA PCI BARs may also be read-only (ref:
+ * https://bugzilla.kernel.org/show_bug.cgi?id=85991 - Comment #4 forward).
*/
static void __devinit quirk_cs5536_vsa(struct pci_dev *dev)
{
+ static char *name = "CS5536 ISA bridge";
+
if (pci_resource_len(dev, 0) != 8) {
- struct resource *res = &dev->resource[0];
- res->end = res->start + 8 - 1;
- dev_info(&dev->dev, "CS5536 ISA bridge bug detected "
- "(incorrect header); workaround applied.\n");
+ quirk_io(dev, 0, 8, name); /* SMB */
+ quirk_io(dev, 1, 256, name); /* GPIO */
+ quirk_io(dev, 2, 64, name); /* MFGPT */
+ dev_info(&dev->dev, "%s bug detected (incorrect header); workaround applied\n",
+ name);
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode);
/*
* Serverworks CSB5 IDE does not fully support native mode
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm);
#ifdef CONFIG_X86_IO_APIC
+static int dmi_disable_ioapicreroute(const struct dmi_system_id *d)
+{
+ noioapicreroute = 1;
+ pr_info("%s detected: disable boot interrupt reroute\n", d->ident);
+
+ return 0;
+}
+
+static struct dmi_system_id boot_interrupt_dmi_table[] = {
+ /*
+ * Systems to exclude from boot interrupt reroute quirks
+ */
+ {
+ .callback = dmi_disable_ioapicreroute,
+ .ident = "ASUSTek Computer INC. M2N-LR",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTek Computer INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "M2N-LR"),
+ },
+ },
+ {}
+};
+
/*
* Boot interrupts on some chipsets cannot be turned off. For these chipsets,
* remap the original interrupt in the linux kernel to the boot interrupt, so
*/
static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev)
{
+ dmi_check_system(boot_interrupt_dmi_table);
if (noioapicquirk || noioapicreroute)
return;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos);
+/*
+ * Quirk non-zero PCI functions to route VPD access through function 0 for
+ * devices that share VPD resources between functions. The functions are
+ * expected to be identical devices.
+ */
+static void quirk_f0_vpd_link(struct pci_dev *dev)
+{
+ struct pci_dev *f0;
+
+ if ((dev->class >> 8) != PCI_CLASS_NETWORK_ETHERNET ||
+ !PCI_FUNC(dev->devfn))
+ return;
+
+ f0 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
+ if (!f0)
+ return;
+
+ if (f0->vpd && dev->class == f0->class &&
+ dev->vendor == f0->vendor && dev->device == f0->device)
+ dev->dev_flags |= PCI_DEV_FLAGS_VPD_REF_F0;
+
+ pci_dev_put(f0);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_f0_vpd_link);
+
static void __devinit quirk_e100_interrupt(struct pci_dev *dev)
{
u16 command, pmcsr;
if (PCI_FUNC(dev->devfn))
return;
/*
- * RICOH 0xe823 SD/MMC card reader fails to recognize
+ * RICOH 0xe822 and 0xe823 SD/MMC card readers fail to recognize
* certain types of SD/MMC cards. Lowering the SD base
* clock frequency from 200Mhz to 50Mhz fixes this issue.
*
* 0xf9 - Key register for 0x150
* 0xfc - key register for 0xe1
*/
- if (dev->device == PCI_DEVICE_ID_RICOH_R5CE823) {
+ if (dev->device == PCI_DEVICE_ID_RICOH_R5CE822 ||
+ dev->device == PCI_DEVICE_ID_RICOH_R5CE823) {
pci_write_config_byte(dev, 0xf9, 0xfc);
pci_write_config_byte(dev, 0x150, 0x10);
pci_write_config_byte(dev, 0xf9, 0x00);
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
#endif /*CONFIG_MMC_RICOH_MMC*/
{
/* TI 816x devices do not have class code set when in PCIe boot mode */
if (dev->class == PCI_CLASS_NOT_DEFINED) {
- dev_info(&dev->dev, "Setting PCI class for 816x PCIe device\n");
- dev->class = PCI_CLASS_MULTIMEDIA_VIDEO;
+ dev->class = PCI_CLASS_MULTIMEDIA_VIDEO << 8;
+ dev_info(&dev->dev, "PCI class overridden (%#08x -> %#08x)\n",
+ PCI_CLASS_NOT_DEFINED, dev->class);
}
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_TI, 0xb800, fixup_ti816x_class);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
+/*
+ * Some BIOS implementations leave the Intel GPU interrupts enabled,
+ * even though no one is handling them (f.e. i915 driver is never loaded).
+ * Additionally the interrupt destination is not set up properly
+ * and the interrupt ends up -somewhere-.
+ *
+ * These spurious interrupts are "sticky" and the kernel disables
+ * the (shared) interrupt line after 100.000+ generated interrupts.
+ *
+ * Fix it by disabling the still enabled interrupts.
+ * This resolves crashes often seen on monitor unplug.
+ */
+#define I915_DEIER_REG 0x4400c
+static void __devinit disable_igfx_irq(struct pci_dev *dev)
+{
+ void __iomem *regs = pci_iomap(dev, 0, 0);
+ if (regs == NULL) {
+ dev_warn(&dev->dev, "igfx quirk: Can't iomap PCI device\n");
+ return;
+ }
+
+ /* Check if any interrupt line is still enabled */
+ if (readl(regs + I915_DEIER_REG) != 0) {
+ dev_warn(&dev->dev, "BIOS left Intel GPU interrupts enabled; "
+ "disabling\n");
+
+ writel(0, regs + I915_DEIER_REG);
+ }
+
+ pci_iounmap(dev, regs);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
+
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
struct pci_fixup *end)
{
git.openpandora.org / pandora-kernel.git / blobdiff