Merge branch 'audit.b32' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit...
[pandora-kernel.git] / drivers / pci / msi.h
index 56951c3..f0cca17 100644 (file)
@@ -6,84 +6,6 @@
 #ifndef MSI_H
 #define MSI_H
 
-/*
- * MSI operation vector.  Used by the msi core code (drivers/pci/msi.c)
- * to abstract platform-specific tasks relating to MSI address generation
- * and resource management.
- */
-struct msi_ops {
-       /**
-        * setup - generate an MSI bus address and data for a given vector
-        * @pdev: PCI device context (in)
-        * @vector: vector allocated by the msi core (in)
-        * @addr_hi: upper 32 bits of PCI bus MSI address (out)
-        * @addr_lo: lower 32 bits of PCI bus MSI address (out)
-        * @data: MSI data payload (out)
-        *
-        * Description: The setup op is used to generate a PCI bus addres and
-        * data which the msi core will program into the card MSI capability
-        * registers.  The setup routine is responsible for picking an initial
-        * cpu to target the MSI at.  The setup routine is responsible for
-        * examining pdev to determine the MSI capabilities of the card and
-        * generating a suitable address/data.  The setup routine is
-        * responsible for allocating and tracking any system resources it
-        * needs to route the MSI to the cpu it picks, and for associating
-        * those resources with the passed in vector.
-        *
-        * Returns 0 if the MSI address/data was successfully setup.
-        **/
-
-       int     (*setup)    (struct pci_dev *pdev, unsigned int vector,
-                            u32 *addr_hi, u32 *addr_lo, u32 *data);
-
-       /**
-        * teardown - release resources allocated by setup
-        * @vector: vector context for resources (in)
-        *
-        * Description:  The teardown op is used to release any resources
-        * that were allocated in the setup routine associated with the passed
-        * in vector.
-        **/
-
-       void    (*teardown) (unsigned int vector);
-
-       /**
-        * target - retarget an MSI at a different cpu
-        * @vector: vector context for resources (in)
-        * @cpu:  new cpu to direct vector at (in)
-        * @addr_hi: new value of PCI bus upper 32 bits (in/out)
-        * @addr_lo: new value of PCI bus lower 32 bits (in/out)
-        *
-        * Description:  The target op is used to redirect an MSI vector
-        * at a different cpu.  addr_hi/addr_lo coming in are the existing
-        * values that the MSI core has programmed into the card.  The
-        * target code is responsible for freeing any resources (if any)
-        * associated with the old address, and generating a new PCI bus
-        * addr_hi/addr_lo that will redirect the vector at the indicated cpu.
-        **/
-
-       void    (*target)   (unsigned int vector, unsigned int cpu,
-                            u32 *addr_hi, u32 *addr_lo);
-};
-
-extern int msi_register(struct msi_ops *ops);
-
-#include <asm/msi.h>
-
-/*
- * Assume the maximum number of hot plug slots supported by the system is about
- * ten. The worstcase is that each of these slots is hot-added with a device,
- * which has two MSI/MSI-X capable functions. To avoid any MSI-X driver, which
- * attempts to request all available vectors, NR_HP_RESERVED_VECTORS is defined
- * as below to ensure at least one message is assigned to each detected MSI/
- * MSI-X device function.
- */
-#define NR_HP_RESERVED_VECTORS         20
-
-extern int vector_irq[NR_VECTORS];
-extern void (*interrupt[NR_IRQS])(void);
-extern int pci_vector_resources(int last, int nr_released);
-
 /*
  * MSI-X Address Register
  */
@@ -110,8 +32,8 @@ extern int pci_vector_resources(int last, int nr_released);
        (1 << ((control & PCI_MSI_FLAGS_QMASK) >> 1))
 #define multi_msi_enable(control, num) \
        control |= (((num >> 1) << 4) & PCI_MSI_FLAGS_QSIZE);
-#define is_64bit_address(control)      (control & PCI_MSI_FLAGS_64BIT)
-#define is_mask_bit_support(control)   (control & PCI_MSI_FLAGS_MASKBIT)
+#define is_64bit_address(control)      (!!(control & PCI_MSI_FLAGS_64BIT))
+#define is_mask_bit_support(control)   (!!(control & PCI_MSI_FLAGS_MASKBIT))
 #define msi_enable(control, num) multi_msi_enable(control, num); \
        control |= PCI_MSI_FLAGS_ENABLE
 
@@ -125,32 +47,4 @@ extern int pci_vector_resources(int last, int nr_released);
 #define msix_mask(address)             (address | PCI_MSIX_FLAGS_BITMASK)
 #define msix_is_pending(address)       (address & PCI_MSIX_FLAGS_PENDMASK)
 
-struct msi_desc {
-       struct {
-               __u8    type    : 5;    /* {0: unused, 5h:MSI, 11h:MSI-X} */
-               __u8    maskbit : 1;    /* mask-pending bit supported ?   */
-               __u8    state   : 1;    /* {0: free, 1: busy}             */
-               __u8    reserved: 1;    /* reserved                       */
-               __u8    entry_nr;       /* specific enabled entry         */
-               __u8    default_vector; /* default pre-assigned vector    */
-               __u8    unused;         /* formerly unused destination cpu*/
-       }msi_attrib;
-
-       struct {
-               __u16   head;
-               __u16   tail;
-       }link;
-
-       void __iomem *mask_base;
-       struct pci_dev *dev;
-
-#ifdef CONFIG_PM
-       /* PM save area for MSIX address/data */
-
-       u32     address_hi_save;
-       u32     address_lo_save;
-       u32     data_save;
-#endif
-};
-
 #endif /* MSI_H */