#include "../pci.h"
#include "shpchp.h"
-static void interrupt_event_handler(void *data);
+static void interrupt_event_handler(struct work_struct *work);
static int shpchp_enable_slot(struct slot *p_slot);
static int shpchp_disable_slot(struct slot *p_slot);
info->event_type = event_type;
info->p_slot = p_slot;
- INIT_WORK(&info->work, interrupt_event_handler, info);
+ INIT_WORK(&info->work, interrupt_event_handler);
schedule_work(&info->work);
return 0;
}
-u8 shpchp_handle_attention_button(u8 hp_slot, void *inst_id)
+u8 shpchp_handle_attention_button(u8 hp_slot, struct controller *ctrl)
{
- struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u32 event_type;
/*
* Button pressed - See if need to TAKE ACTION!!!
*/
- info("Button pressed on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Button pressed on Slot(%s)\n", p_slot->name);
event_type = INT_BUTTON_PRESS;
queue_interrupt_event(p_slot, event_type);
}
-u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id)
+u8 shpchp_handle_switch_change(u8 hp_slot, struct controller *ctrl)
{
- struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u8 getstatus;
u32 event_type;
/*
* Switch opened
*/
- info("Latch open on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Latch open on Slot(%s)\n", p_slot->name);
event_type = INT_SWITCH_OPEN;
if (p_slot->pwr_save && p_slot->presence_save) {
event_type = INT_POWER_FAULT;
/*
* Switch closed
*/
- info("Latch close on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Latch close on Slot(%s)\n", p_slot->name);
event_type = INT_SWITCH_CLOSE;
}
return 1;
}
-u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id)
+u8 shpchp_handle_presence_change(u8 hp_slot, struct controller *ctrl)
{
- struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u32 event_type;
/*
* Card Present
*/
- info("Card present on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Card present on Slot(%s)\n", p_slot->name);
event_type = INT_PRESENCE_ON;
} else {
/*
* Not Present
*/
- info("Card not present on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Card not present on Slot(%s)\n", p_slot->name);
event_type = INT_PRESENCE_OFF;
}
return 1;
}
-u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id)
+u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
{
- struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u32 event_type;
/*
* Power fault Cleared
*/
- info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Power fault cleared on Slot(%s)\n", p_slot->name);
p_slot->status = 0x00;
event_type = INT_POWER_FAULT_CLEAR;
} else {
/*
* Power fault
*/
- info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Power fault on Slot(%s)\n", p_slot->name);
event_type = INT_POWER_FAULT;
/* set power fault status for this board */
p_slot->status = 0xFF;
dbg("%s: change to speed %d\n", __FUNCTION__, speed);
if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed))) {
- err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__);
+ err("%s: Issue of set bus speed mode command failed\n",
+ __FUNCTION__);
return WRONG_BUS_FREQUENCY;
}
return rc;
enum pci_bus_speed msp)
{
int rc = 0;
-
- if (flag != 0) { /* Other slots on the same bus are occupied */
- if ( asp < bsp ) {
- err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bsp, asp);
- return WRONG_BUS_FREQUENCY;
+
+ /*
+ * If other slots on the same bus are occupied, we cannot
+ * change the bus speed.
+ */
+ if (flag) {
+ if (asp < bsp) {
+ err("%s: speed of bus %x and adapter %x mismatch\n",
+ __FUNCTION__, bsp, asp);
+ rc = WRONG_BUS_FREQUENCY;
}
+ return rc;
+ }
+
+ if (asp < msp) {
+ if (bsp != asp)
+ rc = change_bus_speed(ctrl, pslot, asp);
} else {
- /* Other slots on the same bus are empty */
- if (msp == bsp) {
- /* if adapter_speed >= bus_speed, do nothing */
- if (asp < bsp) {
- /*
- * Try to lower bus speed to accommodate the adapter if other slots
- * on the same controller are empty
- */
- if ((rc = change_bus_speed(ctrl, pslot, asp)))
- return rc;
- }
- } else {
- if (asp < msp) {
- if ((rc = change_bus_speed(ctrl, pslot, asp)))
- return rc;
- } else {
- if ((rc = change_bus_speed(ctrl, pslot, msp)))
- return rc;
- }
- }
+ if (bsp != msp)
+ rc = change_bus_speed(ctrl, pslot, msp);
}
return rc;
}
u8 hp_slot;
u8 slots_not_empty = 0;
int rc = 0;
- enum pci_bus_speed adapter_speed, bus_speed, max_bus_speed;
- u8 pi, mode;
+ enum pci_bus_speed asp, bsp, msp;
struct controller *ctrl = p_slot->ctrl;
hp_slot = p_slot->device - ctrl->slot_device_offset;
}
}
- rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &adapter_speed);
- /* 0 = PCI 33Mhz, 1 = PCI 66 Mhz, 2 = PCI-X 66 PA, 4 = PCI-X 66 ECC, */
- /* 5 = PCI-X 133 PA, 7 = PCI-X 133 ECC, 0xa = PCI-X 133 Mhz 266, */
- /* 0xd = PCI-X 133 Mhz 533 */
- /* This encoding is different from the one used in cur_bus_speed & */
- /* max_bus_speed */
-
- if (rc || adapter_speed == PCI_SPEED_UNKNOWN) {
- err("%s: Can't get adapter speed or bus mode mismatch\n", __FUNCTION__);
+ rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &asp);
+ if (rc) {
+ err("%s: Can't get adapter speed or bus mode mismatch\n",
+ __FUNCTION__);
return WRONG_BUS_FREQUENCY;
}
- rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bus_speed);
- if (rc || bus_speed == PCI_SPEED_UNKNOWN) {
+ rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bsp);
+ if (rc) {
err("%s: Can't get bus operation speed\n", __FUNCTION__);
return WRONG_BUS_FREQUENCY;
}
- rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &max_bus_speed);
- if (rc || max_bus_speed == PCI_SPEED_UNKNOWN) {
+ rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &msp);
+ if (rc) {
err("%s: Can't get max bus operation speed\n", __FUNCTION__);
- max_bus_speed = bus_speed;
- }
-
- if ((rc = p_slot->hpc_ops->get_prog_int(p_slot, &pi))) {
- err("%s: Can't get controller programming interface, set it to 1\n", __FUNCTION__);
- pi = 1;
+ msp = bsp;
}
/* Check if there are other slots or devices on the same bus */
if (!list_empty(&ctrl->pci_dev->subordinate->devices))
slots_not_empty = 1;
- dbg("%s: slots_not_empty %d, pi %d\n", __FUNCTION__,
- slots_not_empty, pi);
- dbg("adapter_speed %d, bus_speed %d, max_bus_speed %d\n",
- adapter_speed, bus_speed, max_bus_speed);
+ dbg("%s: slots_not_empty %d, adapter_speed %d, bus_speed %d, "
+ "max_bus_speed %d\n", __FUNCTION__, slots_not_empty, asp,
+ bsp, msp);
- if (pi == 2) {
- dbg("%s: In PI = %d\n", __FUNCTION__, pi);
- if ((rc = p_slot->hpc_ops->get_mode1_ECC_cap(p_slot, &mode))) {
- err("%s: Can't get Mode1_ECC, set mode to 0\n", __FUNCTION__);
- mode = 0;
- }
-
- switch (adapter_speed) {
- case PCI_SPEED_133MHz_PCIX_533:
- case PCI_SPEED_133MHz_PCIX_266:
- if ((bus_speed != adapter_speed) &&
- ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
- return rc;
- break;
- case PCI_SPEED_133MHz_PCIX_ECC:
- case PCI_SPEED_133MHz_PCIX:
- if (mode) { /* Bus - Mode 1 ECC */
- if ((bus_speed != 0x7) &&
- ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
- return rc;
- } else {
- if ((bus_speed != 0x4) &&
- ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
- return rc;
- }
- break;
- case PCI_SPEED_66MHz_PCIX_ECC:
- case PCI_SPEED_66MHz_PCIX:
- if (mode) { /* Bus - Mode 1 ECC */
- if ((bus_speed != 0x5) &&
- ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
- return rc;
- } else {
- if ((bus_speed != 0x2) &&
- ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
- return rc;
- }
- break;
- case PCI_SPEED_66MHz:
- if ((bus_speed != 0x1) &&
- ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
- return rc;
- break;
- case PCI_SPEED_33MHz:
- if (bus_speed > 0x0) {
- if (slots_not_empty == 0) {
- if ((rc = change_bus_speed(ctrl, p_slot, adapter_speed)))
- return rc;
- } else {
- err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bus_speed, adapter_speed);
- return WRONG_BUS_FREQUENCY;
- }
- }
- break;
- default:
- err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bus_speed, adapter_speed);
- return WRONG_BUS_FREQUENCY;
- }
- } else {
- /* If adpater_speed == bus_speed, nothing to do here */
- dbg("%s: In PI = %d\n", __FUNCTION__, pi);
- if ((adapter_speed != bus_speed) &&
- ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
- return rc;
- }
+ rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, asp, bsp, msp);
+ if (rc)
+ return rc;
/* turn on board, blink green LED, turn off Amber LED */
if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
* Handles all pending events and exits.
*
*/
-static void shpchp_pushbutton_thread(void *data)
+static void shpchp_pushbutton_thread(struct work_struct *work)
{
- struct pushbutton_work_info *info = data;
+ struct pushbutton_work_info *info =
+ container_of(work, struct pushbutton_work_info, work);
struct slot *p_slot = info->p_slot;
mutex_lock(&p_slot->lock);
kfree(info);
}
-void queue_pushbutton_work(void *data)
+void queue_pushbutton_work(struct work_struct *work)
{
- struct slot *p_slot = data;
+ struct slot *p_slot = container_of(work, struct slot, work.work);
struct pushbutton_work_info *info;
info = kmalloc(sizeof(*info), GFP_KERNEL);
return;
}
info->p_slot = p_slot;
- INIT_WORK(&info->work, shpchp_pushbutton_thread, info);
+ INIT_WORK(&info->work, shpchp_pushbutton_thread);
mutex_lock(&p_slot->lock);
switch (p_slot->state) {
p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (getstatus) {
p_slot->state = BLINKINGOFF_STATE;
- info(msg_button_off, p_slot->number);
+ info("PCI slot #%s - powering off due to button "
+ "press.\n", p_slot->name);
} else {
p_slot->state = BLINKINGON_STATE;
- info(msg_button_on, p_slot->number);
+ info("PCI slot #%s - powering on due to button "
+ "press.\n", p_slot->name);
}
/* blink green LED and turn off amber */
p_slot->hpc_ops->green_led_blink(p_slot);
else
p_slot->hpc_ops->green_led_off(p_slot);
p_slot->hpc_ops->set_attention_status(p_slot, 0);
- info(msg_button_cancel, p_slot->number);
+ info("PCI slot #%s - action canceled due to button press\n",
+ p_slot->name);
p_slot->state = STATIC_STATE;
break;
case POWEROFF_STATE:
}
}
-static void interrupt_event_handler(void *data)
+static void interrupt_event_handler(struct work_struct *work)
{
- struct event_info *info = data;
+ struct event_info *info = container_of(work, struct event_info, work);
struct slot *p_slot = info->p_slot;
mutex_lock(&p_slot->lock);
mutex_lock(&p_slot->ctrl->crit_sect);
rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
if (rc || !getstatus) {
- info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
+ info("No adapter on slot(%s)\n", p_slot->name);
goto out;
}
rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (rc || getstatus) {
- info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
+ info("Latch open on slot(%s)\n", p_slot->name);
goto out;
}
rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (rc || getstatus) {
- info("%s: already enabled on slot(%x)\n", __FUNCTION__, p_slot->number);
+ info("Already enabled on slot(%s)\n", p_slot->name);
goto out;
}
rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
if (rc || !getstatus) {
- info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
+ info("No adapter on slot(%s)\n", p_slot->name);
goto out;
}
rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (rc || getstatus) {
- info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
+ info("Latch open on slot(%s)\n", p_slot->name);
goto out;
}
rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (rc || !getstatus) {
- info("%s: already disabled slot(%x)\n", __FUNCTION__, p_slot->number);
+ info("Already disabled slot(%s)\n", p_slot->name);
goto out;
}
git.openpandora.org / pandora-kernel.git / blobdiff