Merge ../linux-2.6-watchdog-mm

[pandora-kernel.git] / drivers / net / wireless / wl3501_cs.c

diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index e0d294c..c250f08 100644 (file)
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1145,7 +1145,6 @@ static inline void wl3501_ack_interrupt(struct wl3501_card *this)
  * wl3501_interrupt - Hardware interrupt from card.
  * @irq - Interrupt number
  * @dev_id - net_device
- * @regs - registers
  *
  * We must acknowledge the interrupt as soon as possible, and block the
  * interrupt from the same card immediately to prevent re-entry.
@@ -1154,27 +1153,20 @@ static inline void wl3501_ack_interrupt(struct wl3501_card *this)
  * On the other hand, to prevent SUTRO from malfunctioning, we must
  * unlock the SUTRO as soon as possible.
  */
-static irqreturn_t wl3501_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t wl3501_interrupt(int irq, void *dev_id)
 {
-       struct net_device *dev = (struct net_device *)dev_id;
+       struct net_device *dev = dev_id;
        struct wl3501_card *this;
-       int handled = 1;
 
-       if (!dev)
-               goto unknown;
-       this = dev->priv;
+       this = netdev_priv(dev);
        spin_lock(&this->lock);
        wl3501_ack_interrupt(this);
        wl3501_block_interrupt(this);
        wl3501_rx_interrupt(dev);
        wl3501_unblock_interrupt(this);
        spin_unlock(&this->lock);
-out:
-       return IRQ_RETVAL(handled);
-unknown:
-       handled = 0;
-       printk(KERN_ERR "%s: irq %d for unknown device.\n", __FUNCTION__, irq);
-       goto out;
+
+       return IRQ_HANDLED;
 }
 
 static int wl3501_reset_board(struct wl3501_card *this)
@@ -1802,15 +1794,15 @@ static int wl3501_get_retry(struct net_device *dev,
                                      &retry, sizeof(retry));
        if (rc)
                goto out;
-       if (wrqu->retry.flags & IW_RETRY_MAX) {
-               wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
+       if (wrqu->retry.flags & IW_RETRY_LONG) {
+               wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
                goto set_value;
        }
        rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_SHORT_RETRY_LIMIT,
                                  &retry, sizeof(retry));
        if (rc)
                goto out;
-       wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MIN;
+       wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_SHORT;
 set_value:
        wrqu->retry.value = retry;
        wrqu->retry.disabled = 0;
@@ -1936,7 +1928,6 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
        p_dev->conf.Attributes  = CONF_ENABLE_IRQ;
        p_dev->conf.IntType     = INT_MEMORY_AND_IO;
        p_dev->conf.ConfigIndex = 1;
-       p_dev->conf.Present     = PRESENT_OPTION;
 
        dev = alloc_etherdev(sizeof(struct wl3501_card));
        if (!dev)
@@ -1974,25 +1965,10 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
  */
 static int wl3501_config(struct pcmcia_device *link)
 {
-       tuple_t tuple;
-       cisparse_t parse;
        struct net_device *dev = link->priv;
        int i = 0, j, last_fn, last_ret;
-       unsigned char bf[64];
        struct wl3501_card *this;
 
-       /* This reads the card's CONFIG tuple to find its config registers. */
-       tuple.Attributes        = 0;
-       tuple.DesiredTuple      = CISTPL_CONFIG;
-       CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-       tuple.TupleData         = bf;
-       tuple.TupleDataMax      = sizeof(bf);
-       tuple.TupleOffset       = 0;
-       CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
-       CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse));
-       link->conf.ConfigBase   = parse.config.base;
-       link->conf.Present      = parse.config.rmask[0];
-
        /* Try allocating IO ports.  This tries a few fixed addresses.  If you
         * want, you can also read the card's config table to pick addresses --
         * see the serial driver for an example. */