CONF_SG_TEMP_PARAM_3,
CONF_SG_TEMP_PARAM_4,
CONF_SG_TEMP_PARAM_5,
- CONF_SG_PARAMS_MAX,
+
+ /*
+ * AP beacon miss
+ *
+ * Range: 0 - 255
+ */
+ CONF_SG_AP_BEACON_MISS_TX,
+
+ /*
+ * AP RX window length
+ *
+ * Range: 0 - 50
+ */
+ CONF_SG_RX_WINDOW_LENGTH,
+
+ /*
+ * AP connection protection time
+ *
+ * Range: 0 - 5000
+ */
+ CONF_SG_AP_CONNECTION_PROTECTION_TIME,
+
+ CONF_SG_TEMP_PARAM_6,
+ CONF_SG_TEMP_PARAM_7,
+ CONF_SG_TEMP_PARAM_8,
+ CONF_SG_TEMP_PARAM_9,
+ CONF_SG_TEMP_PARAM_10,
+
+ CONF_SG_STA_PARAMS_MAX = CONF_SG_TEMP_PARAM_5 + 1,
+ CONF_SG_AP_PARAMS_MAX = CONF_SG_TEMP_PARAM_10 + 1,
+
CONF_SG_PARAMS_ALL = 0xff
};
struct conf_sg_settings {
- u32 params[CONF_SG_PARAMS_MAX];
+ u32 sta_params[CONF_SG_STA_PARAMS_MAX];
+ u32 ap_params[CONF_SG_AP_PARAMS_MAX];
u8 state;
};
CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \
CONF_HW_BIT_RATE_54MBPS)
+#define CONF_TX_OFDM_RATES (CONF_HW_BIT_RATE_6MBPS | \
+ CONF_HW_BIT_RATE_12MBPS | CONF_HW_BIT_RATE_24MBPS | \
+ CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \
+ CONF_HW_BIT_RATE_54MBPS)
+
+
/*
* Default rates for management traffic when operating in AP mode. This
* should be configured according to the basic rate set of the AP
#define CONF_TX_AP_DEFAULT_MGMT_RATES (CONF_HW_BIT_RATE_1MBPS | \
CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS)
+/*
+ * Default rates for working as IBSS. use 11b rates
+ */
+#define CONF_TX_IBSS_DEFAULT_RATES (CONF_HW_BIT_RATE_1MBPS | \
+ CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \
+ CONF_HW_BIT_RATE_11MBPS);
+
struct conf_tx_rate_class {
/*
u8 ac_conf_count;
struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT];
- /*
- * Configuration for rate classes in AP-mode. These rate classes
- * are for the AC TX queues
- */
- struct conf_tx_rate_class ap_rc_conf[CONF_TX_MAX_AC_COUNT];
-
- /*
- * Management TX rate class for AP-mode.
- */
- struct conf_tx_rate_class ap_mgmt_conf;
-
- /*
- * Broadcast TX rate class for AP-mode.
- */
- struct conf_tx_rate_class ap_bcst_conf;
-
/*
* AP-mode - allow this number of TX retries to a station before an
* event is triggered from FW.
CONF_REF_CLK_19_2_E,
CONF_REF_CLK_26_E,
CONF_REF_CLK_38_4_E,
- CONF_REF_CLK_52_E
+ CONF_REF_CLK_52_E,
+ CONF_REF_CLK_38_4_M_XTAL,
+ CONF_REF_CLK_26_M_XTAL,
};
enum single_dual_band_enum {
#define CONF_NUMBER_OF_CHANNELS_2_4 14
#define CONF_NUMBER_OF_CHANNELS_5 35
-struct conf_radio_parms {
- /*
- * FEM parameter set to use
- *
- * Range: 0 or 1
- */
- u8 fem;
-};
-
struct conf_itrim_settings {
/* enable dco itrim */
u8 enable;
};
+struct conf_sched_scan_settings {
+ /* minimum time to wait on the channel for active scans (in TUs) */
+ u16 min_dwell_time_active;
+
+ /* maximum time to wait on the channel for active scans (in TUs) */
+ u16 max_dwell_time_active;
+
+ /* time to wait on the channel for passive scans (in TUs) */
+ u32 dwell_time_passive;
+
+ /* time to wait on the channel for DFS scans (in TUs) */
+ u32 dwell_time_dfs;
+
+ /* number of probe requests to send on each channel in active scans */
+ u8 num_probe_reqs;
+
+ /* RSSI threshold to be used for filtering */
+ s8 rssi_threshold;
+
+ /* SNR threshold to be used for filtering */
+ s8 snr_threshold;
+};
+
/* these are number of channels on the band divided by two, rounded up */
#define CONF_TX_PWR_COMPENSATION_LEN_2 7
#define CONF_TX_PWR_COMPENSATION_LEN_5 18
u8 tx_min;
};
+struct conf_fm_coex {
+ u8 enable;
+ u8 swallow_period;
+ u8 n_divider_fref_set_1;
+ u8 n_divider_fref_set_2;
+ u16 m_divider_fref_set_1;
+ u16 m_divider_fref_set_2;
+ u32 coex_pll_stabilization_time;
+ u16 ldo_stabilization_time;
+ u8 fm_disturbed_band_margin;
+ u8 swallow_clk_diff;
+};
+
+struct conf_rx_streaming_settings {
+ /*
+ * RX Streaming duration (in msec) from last tx/rx
+ *
+ * Range: u32
+ */
+ u32 duration;
+
+ /*
+ * Bitmap of tids to be polled during RX streaming.
+ * (Note: it doesn't look like it really matters)
+ *
+ * Range: 0x1-0xff
+ */
+ u8 queues;
+
+ /*
+ * RX Streaming interval.
+ * (Note:this value is also used as the rx streaming timeout)
+ * Range: 0 (disabled), 10 - 100
+ */
+ u8 interval;
+
+ /*
+ * enable rx streaming also when there is no coex activity
+ */
+ u8 always;
+};
+
+struct conf_fwlog {
+ /* Continuous or on-demand */
+ u8 mode;
+
+ /*
+ * Number of memory blocks dedicated for the FW logger
+ *
+ * Range: 1-3, or 0 to disable the FW logger
+ */
+ u8 mem_blocks;
+
+ /* Minimum log level threshold */
+ u8 severity;
+
+ /* Include/exclude timestamps from the log messages */
+ u8 timestamp;
+
+ /* See enum wl1271_fwlogger_output */
+ u8 output;
+
+ /* Regulates the frequency of log messages */
+ u8 threshold;
+};
+
struct conf_drv_settings {
struct conf_sg_settings sg;
struct conf_rx_settings rx;
struct conf_pm_config_settings pm_config;
struct conf_roam_trigger_settings roam_trigger;
struct conf_scan_settings scan;
+ struct conf_sched_scan_settings sched_scan;
struct conf_rf_settings rf;
struct conf_ht_setting ht;
- struct conf_memory_settings mem;
+ struct conf_memory_settings mem_wl127x;
+ struct conf_memory_settings mem_wl128x;
+ struct conf_fm_coex fm_coex;
+ struct conf_rx_streaming_settings rx_streaming;
+ struct conf_fwlog fwlog;
+ u8 hci_io_ds;
};
#endif