if (priv->monitormode == monitor_mode)
return strlen(buf);
if (!priv->monitormode) {
- if (priv->infra_open || priv->mesh_open)
+ if (priv->infra_open || lbs_mesh_open(priv))
return -EBUSY;
if (priv->mode == IW_MODE_INFRA)
lbs_cmd_80211_deauthenticate(priv,
if (priv->cmd_timed_out && priv->cur_cmd) {
struct cmd_ctrl_node *cmdnode = priv->cur_cmd;
- if (++priv->nr_retries > 3) {
- lbs_pr_info("Excessive timeouts submitting "
- "command 0x%04x\n",
- le16_to_cpu(cmdnode->cmdbuf->command));
- lbs_complete_command(priv, cmdnode, -ETIMEDOUT);
- priv->nr_retries = 0;
- if (priv->reset_card)
- priv->reset_card(priv);
- } else {
- priv->cur_cmd = NULL;
- priv->dnld_sent = DNLD_RES_RECEIVED;
- lbs_pr_info("requeueing command 0x%04x due "
- "to timeout (#%d)\n",
- le16_to_cpu(cmdnode->cmdbuf->command),
- priv->nr_retries);
-
- /* Stick it back at the _top_ of the pending queue
- for immediate resubmission */
- list_add(&cmdnode->list, &priv->cmdpendingq);
- }
+ lbs_pr_info("Timeout submitting command 0x%04x\n",
+ le16_to_cpu(cmdnode->cmdbuf->command));
+ lbs_complete_command(priv, cmdnode, -ETIMEDOUT);
+ if (priv->reset_card)
+ priv->reset_card(priv);
}
priv->cmd_timed_out = 0;
-
-
if (!priv->fw_ready)
continue;
if (priv->connect_status == LBS_CONNECTED)
netif_wake_queue(priv->dev);
if (priv->mesh_dev &&
- priv->mesh_connect_status == LBS_CONNECTED)
+ lbs_mesh_connected(priv))
netif_wake_queue(priv->mesh_dev);
}
}
* This function handles the timeout of command sending.
* It will re-send the same command again.
*/
-static void command_timer_fn(unsigned long data)
+static void lbs_cmd_timeout_handler(unsigned long data)
{
struct lbs_private *priv = (struct lbs_private *)data;
unsigned long flags;
return 0;
}
-static void lbs_sync_channel_worker(struct work_struct *work)
-{
- struct lbs_private *priv = container_of(work, struct lbs_private,
- sync_channel);
-
- lbs_deb_enter(LBS_DEB_MAIN);
- if (lbs_update_channel(priv))
- lbs_pr_info("Channel synchronization failed.");
- lbs_deb_leave(LBS_DEB_MAIN);
-}
-
-
static int lbs_init_adapter(struct lbs_private *priv)
{
size_t bufsize;
memset(priv->current_addr, 0xff, ETH_ALEN);
priv->connect_status = LBS_DISCONNECTED;
- priv->mesh_connect_status = LBS_DISCONNECTED;
priv->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
priv->mode = IW_MODE_INFRA;
priv->channel = DEFAULT_AD_HOC_CHANNEL;
priv->mac_control = CMD_ACT_MAC_RX_ON | CMD_ACT_MAC_TX_ON;
priv->radio_on = 1;
priv->enablehwauto = 1;
- priv->capability = WLAN_CAPABILITY_SHORT_PREAMBLE;
priv->psmode = LBS802_11POWERMODECAM;
priv->psstate = PS_STATE_FULL_POWER;
priv->is_deep_sleep = 0;
mutex_init(&priv->lock);
- setup_timer(&priv->command_timer, command_timer_fn,
+ setup_timer(&priv->command_timer, lbs_cmd_timeout_handler,
(unsigned long)priv);
setup_timer(&priv->auto_deepsleep_timer, auto_deepsleep_timer_fn,
(unsigned long)priv);
INIT_DELAYED_WORK(&priv->assoc_work, lbs_association_worker);
INIT_DELAYED_WORK(&priv->scan_work, lbs_scan_worker);
INIT_WORK(&priv->mcast_work, lbs_set_mcast_worker);
- INIT_WORK(&priv->sync_channel, lbs_sync_channel_worker);
-
- priv->mesh_open = 0;
- sprintf(priv->mesh_ssid, "mesh");
- priv->mesh_ssid_len = 4;
priv->wol_criteria = 0xffffffff;
priv->wol_gpio = 0xff;
EXPORT_SYMBOL_GPL(lbs_remove_card);
+static int lbs_rtap_supported(struct lbs_private *priv)
+{
+ if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V5)
+ return 1;
+
+ /* newer firmware use a capability mask */
+ return ((MRVL_FW_MAJOR_REV(priv->fwrelease) >= MRVL_FW_V10) &&
+ (priv->fwcapinfo & MESH_CAPINFO_ENABLE_MASK));
+}
+
+
int lbs_start_card(struct lbs_private *priv)
{
struct net_device *dev = priv->dev;
lbs_update_channel(priv);
+ lbs_init_mesh(priv);
+
/*
* While rtap isn't related to mesh, only mesh-enabled
* firmware implements the rtap functionality via
* CMD_802_11_MONITOR_MODE.
*/
- if (lbs_init_mesh(priv)) {
+ if (lbs_rtap_supported(priv)) {
if (device_create_file(&dev->dev, &dev_attr_lbs_rtap))
lbs_pr_err("cannot register lbs_rtap attribute\n");
}
netif_carrier_off(dev);
lbs_debugfs_remove_one(priv);
- if (lbs_deinit_mesh(priv))
+ lbs_deinit_mesh(priv);
+
+ if (lbs_rtap_supported(priv))
device_remove_file(&dev->dev, &dev_attr_lbs_rtap);
/* Delete the timeout of the currently processing command */