#define DRV_DESCRIPTION \
"Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
-#ifdef CONFIG_IWL3945_DEBUG
+#ifdef CONFIG_IWLWIFI_DEBUG
#define VD "d"
#else
#define VD
/* the rest are 0 by default */
};
-/*************** DMA-QUEUE-GENERAL-FUNCTIONS *****
- * DMA services
- *
- * Theory of operation
- *
- * A Tx or Rx queue resides in host DRAM, and is comprised of a circular buffer
- * of buffer descriptors, each of which points to one or more data buffers for
- * the device to read from or fill. Driver and device exchange status of each
- * queue via "read" and "write" pointers. Driver keeps minimum of 2 empty
- * entries in each circular buffer, to protect against confusing empty and full
- * queue states.
- *
- * The device reads or writes the data in the queues via the device's several
- * DMA/FIFO channels. Each queue is mapped to a single DMA channel.
- *
- * For Tx queue, there are low mark and high mark limits. If, after queuing
- * the packet for Tx, free space become < low mark, Tx queue stopped. When
- * reclaiming packets (on 'tx done IRQ), if free space become > high mark,
- * Tx queue resumed.
- *
- * The 3945 operates with six queues: One receive queue, one transmit queue
- * (#4) for sending commands to the device firmware, and four transmit queues
- * (#0-3) for data tx via EDCA. An additional 2 HCCA queues are unused.
- ***************************************************/
-
-/**
- * iwl3945_queue_init - Initialize queue's high/low-water and read/write indexes
- */
-static int iwl3945_queue_init(struct iwl_priv *priv, struct iwl_queue *q,
- int count, int slots_num, u32 id)
-{
- q->n_bd = count;
- q->n_window = slots_num;
- q->id = id;
-
- /* count must be power-of-two size, otherwise iwl_queue_inc_wrap
- * and iwl_queue_dec_wrap are broken. */
- BUG_ON(!is_power_of_2(count));
-
- /* slots_num must be power-of-two size, otherwise
- * get_cmd_index is broken. */
- BUG_ON(!is_power_of_2(slots_num));
-
- q->low_mark = q->n_window / 4;
- if (q->low_mark < 4)
- q->low_mark = 4;
-
- q->high_mark = q->n_window / 8;
- if (q->high_mark < 2)
- q->high_mark = 2;
-
- q->write_ptr = q->read_ptr = 0;
-
- return 0;
-}
-
-/**
- * iwl3945_tx_queue_alloc - Alloc driver data and TFD CB for one Tx/cmd queue
- */
-static int iwl3945_tx_queue_alloc(struct iwl_priv *priv,
- struct iwl_tx_queue *txq, u32 id)
-{
- struct pci_dev *dev = priv->pci_dev;
-
- /* Driver private data, only for Tx (not command) queues,
- * not shared with device. */
- if (id != IWL_CMD_QUEUE_NUM) {
- txq->txb = kmalloc(sizeof(txq->txb[0]) *
- TFD_QUEUE_SIZE_MAX, GFP_KERNEL);
- if (!txq->txb) {
- IWL_ERR(priv, "kmalloc for auxiliary BD "
- "structures failed\n");
- goto error;
- }
- } else
- txq->txb = NULL;
-
- /* Circular buffer of transmit frame descriptors (TFDs),
- * shared with device */
- txq->tfds39 = pci_alloc_consistent(dev,
- sizeof(txq->tfds39[0]) * TFD_QUEUE_SIZE_MAX,
- &txq->q.dma_addr);
-
- if (!txq->tfds39) {
- IWL_ERR(priv, "pci_alloc_consistent(%zd) failed\n",
- sizeof(txq->tfds39[0]) * TFD_QUEUE_SIZE_MAX);
- goto error;
- }
- txq->q.id = id;
-
- return 0;
-
- error:
- kfree(txq->txb);
- txq->txb = NULL;
-
- return -ENOMEM;
-}
-
-/**
- * iwl3945_tx_queue_init - Allocate and initialize one tx/cmd queue
- */
-int iwl3945_tx_queue_init(struct iwl_priv *priv,
- struct iwl_tx_queue *txq, int slots_num, u32 txq_id)
-{
- int len, i;
- int rc = 0;
-
- /*
- * Alloc buffer array for commands (Tx or other types of commands).
- * For the command queue (#4), allocate command space + one big
- * command for scan, since scan command is very huge; the system will
- * not have two scans at the same time, so only one is needed.
- * For data Tx queues (all other queues), no super-size command
- * space is needed.
- */
- len = sizeof(struct iwl_cmd);
- for (i = 0; i <= slots_num; i++) {
- if (i == slots_num) {
- if (txq_id == IWL_CMD_QUEUE_NUM)
- len += IWL_MAX_SCAN_SIZE;
- else
- continue;
- }
-
- txq->cmd[i] = kmalloc(len, GFP_KERNEL);
- if (!txq->cmd[i])
- goto err;
- }
-
- /* Alloc driver data array and TFD circular buffer */
- rc = iwl3945_tx_queue_alloc(priv, txq, txq_id);
- if (rc)
- goto err;
-
- txq->need_update = 0;
-
- /* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
- * iwl_queue_inc_wrap and iwl_queue_dec_wrap are broken. */
- BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX & (TFD_QUEUE_SIZE_MAX - 1));
-
- /* Initialize queue high/low-water, head/tail indexes */
- iwl3945_queue_init(priv, &txq->q, TFD_QUEUE_SIZE_MAX, slots_num, txq_id);
-
- /* Tell device where to find queue, enable DMA channel. */
- iwl3945_hw_tx_queue_init(priv, txq);
-
- return 0;
-err:
- for (i = 0; i < slots_num; i++) {
- kfree(txq->cmd[i]);
- txq->cmd[i] = NULL;
- }
-
- if (txq_id == IWL_CMD_QUEUE_NUM) {
- kfree(txq->cmd[slots_num]);
- txq->cmd[slots_num] = NULL;
- }
- return -ENOMEM;
-}
-
-/**
- * iwl3945_tx_queue_free - Deallocate DMA queue.
- * @txq: Transmit queue to deallocate.
- *
- * Empty queue by removing and destroying all BD's.
- * Free all buffers.
- * 0-fill, but do not free "txq" descriptor structure.
- */
-void iwl3945_tx_queue_free(struct iwl_priv *priv, struct iwl_tx_queue *txq)
-{
- struct iwl_queue *q = &txq->q;
- struct pci_dev *dev = priv->pci_dev;
- int len, i;
-
- if (q->n_bd == 0)
- return;
-
- /* first, empty all BD's */
- for (; q->write_ptr != q->read_ptr;
- q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd))
- priv->cfg->ops->lib->txq_free_tfd(priv, txq);
-
- len = sizeof(struct iwl_cmd) * q->n_window;
- if (q->id == IWL_CMD_QUEUE_NUM)
- len += IWL_MAX_SCAN_SIZE;
-
- /* De-alloc array of command/tx buffers */
- for (i = 0; i < TFD_TX_CMD_SLOTS; i++)
- kfree(txq->cmd[i]);
-
- /* De-alloc circular buffer of TFDs */
- if (txq->q.n_bd)
- pci_free_consistent(dev, sizeof(struct iwl3945_tfd) *
- txq->q.n_bd, txq->tfds39, txq->q.dma_addr);
-
- /* De-alloc array of per-TFD driver data */
- kfree(txq->txb);
- txq->txb = NULL;
-
- /* 0-fill queue descriptor structure */
- memset(txq, 0, sizeof(*txq));
-}
-
/*************** STATION TABLE MANAGEMENT ****
* mac80211 should be examined to determine if sta_info is duplicating
* the functionality provided here
enum ieee80211_band band,
u16 channel)
{
- if (!iwl3945_get_channel_info(priv, band, channel)) {
+ if (!iwl_get_channel_info(priv, band, channel)) {
IWL_DEBUG_INFO("Could not set channel to %d [%d]\n",
channel, band);
return -EINVAL;
/* If we issue a new RXON command which required a tune then we must
* send a new TXPOWER command or we won't be able to Tx any frames */
- rc = iwl3945_hw_reg_send_txpower(priv);
+ rc = priv->cfg->ops->lib->send_tx_power(priv);
if (rc) {
IWL_ERR(priv, "Error setting Tx power (%d).\n", rc);
return rc;
sizeof(bt_cmd), &bt_cmd);
}
-static int iwl3945_send_scan_abort(struct iwl_priv *priv)
-{
- int rc = 0;
- struct iwl_rx_packet *res;
- struct iwl_host_cmd cmd = {
- .id = REPLY_SCAN_ABORT_CMD,
- .meta.flags = CMD_WANT_SKB,
- };
-
- /* If there isn't a scan actively going on in the hardware
- * then we are in between scan bands and not actually
- * actively scanning, so don't send the abort command */
- if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
- clear_bit(STATUS_SCAN_ABORTING, &priv->status);
- return 0;
- }
-
- rc = iwl_send_cmd_sync(priv, &cmd);
- if (rc) {
- clear_bit(STATUS_SCAN_ABORTING, &priv->status);
- return rc;
- }
-
- res = (struct iwl_rx_packet *)cmd.meta.u.skb->data;
- if (res->u.status != CAN_ABORT_STATUS) {
- /* The scan abort will return 1 for success or
- * 2 for "failure". A failure condition can be
- * due to simply not being in an active scan which
- * can occur if we send the scan abort before we
- * the microcode has notified us that a scan is
- * completed. */
- IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res->u.status);
- clear_bit(STATUS_SCAN_ABORTING, &priv->status);
- clear_bit(STATUS_SCAN_HW, &priv->status);
- }
-
- dev_kfree_skb_any(cmd.meta.u.skb);
-
- return rc;
-}
-
static int iwl3945_add_sta_sync_callback(struct iwl_priv *priv,
struct iwl_cmd *cmd, struct sk_buff *skb)
{
return rc;
}
-/******************************************************************************
- *
- * EEPROM related functions
- *
- ******************************************************************************/
-
-static void get_eeprom_mac(struct iwl_priv *priv, u8 *mac)
-{
- memcpy(mac, priv->eeprom39.mac_address, 6);
-}
-
-/*
- * Clear the OWNER_MSK, to establish driver (instead of uCode running on
- * embedded controller) as EEPROM reader; each read is a series of pulses
- * to/from the EEPROM chip, not a single event, so even reads could conflict
- * if they weren't arbitrated by some ownership mechanism. Here, the driver
- * simply claims ownership, which should be safe when this function is called
- * (i.e. before loading uCode!).
- */
-static inline int iwl3945_eeprom_acquire_semaphore(struct iwl_priv *priv)
-{
- _iwl_clear_bit(priv, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK);
- return 0;
-}
-
-/**
- * iwl3945_eeprom_init - read EEPROM contents
- *
- * Load the EEPROM contents from adapter into priv->eeprom39
- *
- * NOTE: This routine uses the non-debug IO access functions.
- */
-int iwl3945_eeprom_init(struct iwl_priv *priv)
-{
- u16 *e = (u16 *)&priv->eeprom39;
- u32 gp = iwl_read32(priv, CSR_EEPROM_GP);
- int sz = sizeof(priv->eeprom39);
- int ret;
- u16 addr;
-
- /* The EEPROM structure has several padding buffers within it
- * and when adding new EEPROM maps is subject to programmer errors
- * which may be very difficult to identify without explicitly
- * checking the resulting size of the eeprom map. */
- BUILD_BUG_ON(sizeof(priv->eeprom39) != IWL_EEPROM_IMAGE_SIZE);
-
- if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
- IWL_ERR(priv, "EEPROM not found, EEPROM_GP=0x%08x\n", gp);
- return -ENOENT;
- }
-
- /* Make sure driver (instead of uCode) is allowed to read EEPROM */
- ret = iwl3945_eeprom_acquire_semaphore(priv);
- if (ret < 0) {
- IWL_ERR(priv, "Failed to acquire EEPROM semaphore.\n");
- return -ENOENT;
- }
-
- /* eeprom is an array of 16bit values */
- for (addr = 0; addr < sz; addr += sizeof(u16)) {
- u32 r;
-
- _iwl_write32(priv, CSR_EEPROM_REG,
- CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
- _iwl_clear_bit(priv, CSR_EEPROM_REG, CSR_EEPROM_REG_BIT_CMD);
- ret = iwl_poll_direct_bit(priv, CSR_EEPROM_REG,
- CSR_EEPROM_REG_READ_VALID_MSK,
- IWL_EEPROM_ACCESS_TIMEOUT);
- if (ret < 0) {
- IWL_ERR(priv, "Time out reading EEPROM[%d]\n", addr);
- return ret;
- }
-
- r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
- e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
- }
-
- return 0;
-}
-
static void iwl3945_unset_hw_params(struct iwl_priv *priv)
{
if (priv->shared_virt)
priv->shared_phys);
}
-/**
- * iwl3945_supported_rate_to_ie - fill in the supported rate in IE field
- *
- * return : set the bit for each supported rate insert in ie
- */
-static u16 iwl3945_supported_rate_to_ie(u8 *ie, u16 supported_rate,
- u16 basic_rate, int *left)
-{
- u16 ret_rates = 0, bit;
- int i;
- u8 *cnt = ie;
- u8 *rates = ie + 1;
-
- for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) {
- if (bit & supported_rate) {
- ret_rates |= bit;
- rates[*cnt] = iwl3945_rates[i].ieee |
- ((bit & basic_rate) ? 0x80 : 0x00);
- (*cnt)++;
- (*left)--;
- if ((*left <= 0) ||
- (*cnt >= IWL_SUPPORTED_RATES_IE_LEN))
- break;
- }
- }
-
- return ret_rates;
-}
-
-/**
- * iwl3945_fill_probe_req - fill in all required fields and IE for probe request
- */
-static u16 iwl3945_fill_probe_req(struct iwl_priv *priv,
- struct ieee80211_mgmt *frame,
- int left)
-{
- int len = 0;
- u8 *pos = NULL;
- u16 active_rates, ret_rates, cck_rates;
-
- /* Make sure there is enough space for the probe request,
- * two mandatory IEs and the data */
- left -= 24;
- if (left < 0)
- return 0;
- len += 24;
-
- frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
- memcpy(frame->da, iwl_bcast_addr, ETH_ALEN);
- memcpy(frame->sa, priv->mac_addr, ETH_ALEN);
- memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN);
- frame->seq_ctrl = 0;
-
- /* fill in our indirect SSID IE */
- /* ...next IE... */
-
- left -= 2;
- if (left < 0)
- return 0;
- len += 2;
- pos = &(frame->u.probe_req.variable[0]);
- *pos++ = WLAN_EID_SSID;
- *pos++ = 0;
-
- /* fill in supported rate */
- /* ...next IE... */
- left -= 2;
- if (left < 0)
- return 0;
-
- /* ... fill it in... */
- *pos++ = WLAN_EID_SUPP_RATES;
- *pos = 0;
-
- priv->active_rate = priv->rates_mask;
- active_rates = priv->active_rate;
- priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK;
-
- cck_rates = IWL_CCK_RATES_MASK & active_rates;
- ret_rates = iwl3945_supported_rate_to_ie(pos, cck_rates,
- priv->active_rate_basic, &left);
- active_rates &= ~ret_rates;
-
- ret_rates = iwl3945_supported_rate_to_ie(pos, active_rates,
- priv->active_rate_basic, &left);
- active_rates &= ~ret_rates;
-
- len += 2 + *pos;
- pos += (*pos) + 1;
- if (active_rates == 0)
- goto fill_end;
-
- /* fill in supported extended rate */
- /* ...next IE... */
- left -= 2;
- if (left < 0)
- return 0;
- /* ... fill it in... */
- *pos++ = WLAN_EID_EXT_SUPP_RATES;
- *pos = 0;
- iwl3945_supported_rate_to_ie(pos, active_rates,
- priv->active_rate_basic, &left);
- if (*pos > 0)
- len += 2 + *pos;
-
- fill_end:
- return (u16)len;
-}
-
/*
* QoS support
*/
priv->staging39_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
#endif
- ch_info = iwl3945_get_channel_info(priv, priv->band,
+ ch_info = iwl_get_channel_info(priv, priv->band,
le16_to_cpu(priv->active39_rxon.channel));
if (!ch_info)
if (mode == NL80211_IFTYPE_ADHOC) {
const struct iwl_channel_info *ch_info;
- ch_info = iwl3945_get_channel_info(priv,
+ ch_info = iwl_get_channel_info(priv,
priv->band,
le16_to_cpu(priv->staging39_rxon.channel));
fc = hdr->frame_control;
-#ifdef CONFIG_IWL3945_DEBUG
+#ifdef CONFIG_IWLWIFI_DEBUG
if (ieee80211_is_auth(fc))
IWL_DEBUG_TX("Sending AUTH frame\n");
else if (ieee80211_is_assoc_req(fc))
static void iwl3945_rx_pm_sleep_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
-#ifdef CONFIG_IWL3945_DEBUG
+#ifdef CONFIG_IWLWIFI_DEBUG
struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
struct iwl_sleep_notification *sleep = &(pkt->u.sleep_notif);
IWL_DEBUG_RX("sleep mode: %d, src: %d\n",
static void iwl3945_rx_beacon_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
-#ifdef CONFIG_IWL3945_DEBUG
+#ifdef CONFIG_IWLWIFI_DEBUG
struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
struct iwl3945_beacon_notif *beacon = &(pkt->u.beacon_status);
u8 rate = beacon->beacon_notify_hdr.rate;
static void iwl3945_rx_reply_scan(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
-#ifdef CONFIG_IWL3945_DEBUG
+#ifdef CONFIG_IWLWIFI_DEBUG
struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
struct iwl_scanreq_notification *notif =
(struct iwl_scanreq_notification *)pkt->u.raw;
iwl3945_rx_queue_restock(priv);
}
-#ifdef CONFIG_IWL3945_DEBUG
+#ifdef CONFIG_IWLWIFI_DEBUG
static void iwl3945_print_rx_config_cmd(struct iwl_priv *priv,
struct iwl3945_rxon_cmd *rxon)
{
/* Cancel currently queued command. */
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
-#ifdef CONFIG_IWL3945_DEBUG
+#ifdef CONFIG_IWLWIFI_DEBUG
if (priv->debug_level & IWL_DL_FW_ERRORS) {
iwl3945_dump_nic_error_log(priv);
iwl3945_dump_nic_event_log(priv);
u32 inta, handled = 0;
u32 inta_fh;
unsigned long flags;
-#ifdef CONFIG_IWL3945_DEBUG
+#ifdef CONFIG_IWLWIFI_DEBUG
u32 inta_mask;
#endif
inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
-#ifdef CONFIG_IWL3945_DEBUG
+#ifdef CONFIG_IWLWIFI_DEBUG
if (priv->debug_level & IWL_DL_ISR) {
/* just for debug */
inta_mask = iwl_read32(priv, CSR_INT_MASK);
return;
}
-#ifdef CONFIG_IWL3945_DEBUG
+#ifdef CONFIG_IWLWIFI_DEBUG
if (priv->debug_level & (IWL_DL_ISR)) {
/* NIC fires this, but we don't use it, redundant with WAKEUP */
if (inta & CSR_INT_BIT_SCD)
if (test_bit(STATUS_INT_ENABLED, &priv->status))
iwl3945_enable_interrupts(priv);
-#ifdef CONFIG_IWL3945_DEBUG
+#ifdef CONFIG_IWLWIFI_DEBUG
if (priv->debug_level & (IWL_DL_ISR)) {
inta = iwl_read32(priv, CSR_INT);
inta_mask = iwl_read32(priv, CSR_INT_MASK);
return IRQ_NONE;
}
-/************************** EEPROM BANDS ****************************
- *
- * The iwl3945_eeprom_band definitions below provide the mapping from the
- * EEPROM contents to the specific channel number supported for each
- * band.
- *
- * For example, iwl3945_priv->eeprom39.band_3_channels[4] from the band_3
- * definition below maps to physical channel 42 in the 5.2GHz spectrum.
- * The specific geography and calibration information for that channel
- * is contained in the eeprom map itself.
- *
- * During init, we copy the eeprom information and channel map
- * information into priv->channel_info_24/52 and priv->channel_map_24/52
- *
- * channel_map_24/52 provides the index in the channel_info array for a
- * given channel. We have to have two separate maps as there is channel
- * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and
- * band_2
- *
- * A value of 0xff stored in the channel_map indicates that the channel
- * is not supported by the hardware at all.
- *
- * A value of 0xfe in the channel_map indicates that the channel is not
- * valid for Tx with the current hardware. This means that
- * while the system can tune and receive on a given channel, it may not
- * be able to associate or transmit any frames on that
- * channel. There is no corresponding channel information for that
- * entry.
- *
- *********************************************************************/
-
-/* 2.4 GHz */
-static const u8 iwl3945_eeprom_band_1[14] = {
- 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
-};
-
-/* 5.2 GHz bands */
-static const u8 iwl3945_eeprom_band_2[] = { /* 4915-5080MHz */
- 183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16
-};
-
-static const u8 iwl3945_eeprom_band_3[] = { /* 5170-5320MHz */
- 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
-};
-
-static const u8 iwl3945_eeprom_band_4[] = { /* 5500-5700MHz */
- 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
-};
-
-static const u8 iwl3945_eeprom_band_5[] = { /* 5725-5825MHz */
- 145, 149, 153, 157, 161, 165
-};
-
-static void iwl3945_init_band_reference(const struct iwl_priv *priv, int band,
- int *eeprom_ch_count,
- const struct iwl_eeprom_channel
- **eeprom_ch_info,
- const u8 **eeprom_ch_index)
-{
- switch (band) {
- case 1: /* 2.4GHz band */
- *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_1);
- *eeprom_ch_info = priv->eeprom39.band_1_channels;
- *eeprom_ch_index = iwl3945_eeprom_band_1;
- break;
- case 2: /* 4.9GHz band */
- *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_2);
- *eeprom_ch_info = priv->eeprom39.band_2_channels;
- *eeprom_ch_index = iwl3945_eeprom_band_2;
- break;
- case 3: /* 5.2GHz band */
- *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_3);
- *eeprom_ch_info = priv->eeprom39.band_3_channels;
- *eeprom_ch_index = iwl3945_eeprom_band_3;
- break;
- case 4: /* 5.5GHz band */
- *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_4);
- *eeprom_ch_info = priv->eeprom39.band_4_channels;
- *eeprom_ch_index = iwl3945_eeprom_band_4;
- break;
- case 5: /* 5.7GHz band */
- *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_5);
- *eeprom_ch_info = priv->eeprom39.band_5_channels;
- *eeprom_ch_index = iwl3945_eeprom_band_5;
- break;
- default:
- BUG();
- return;
- }
-}
-
-/**
- * iwl3945_get_channel_info - Find driver's private channel info
- *
- * Based on band and channel number.
- */
-const struct iwl_channel_info *
-iwl3945_get_channel_info(const struct iwl_priv *priv,
- enum ieee80211_band band, u16 channel)
-{
- int i;
-
- switch (band) {
- case IEEE80211_BAND_5GHZ:
- for (i = 14; i < priv->channel_count; i++) {
- if (priv->channel_info[i].channel == channel)
- return &priv->channel_info[i];
- }
- break;
-
- case IEEE80211_BAND_2GHZ:
- if (channel >= 1 && channel <= 14)
- return &priv->channel_info[channel - 1];
- break;
- case IEEE80211_NUM_BANDS:
- WARN_ON(1);
- }
-
- return NULL;
-}
-
-#define CHECK_AND_PRINT(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \
- ? # x " " : "")
-
-/**
- * iwl3945_init_channel_map - Set up driver's info for all possible channels
- */
-static int iwl3945_init_channel_map(struct iwl_priv *priv)
-{
- int eeprom_ch_count = 0;
- const u8 *eeprom_ch_index = NULL;
- const struct iwl_eeprom_channel *eeprom_ch_info = NULL;
- int band, ch;
- struct iwl_channel_info *ch_info;
-
- if (priv->channel_count) {
- IWL_DEBUG_INFO("Channel map already initialized.\n");
- return 0;
- }
-
- if (priv->eeprom39.version < 0x2f) {
- IWL_WARN(priv, "Unsupported EEPROM version: 0x%04X\n",
- priv->eeprom39.version);
- return -EINVAL;
- }
-
- IWL_DEBUG_INFO("Initializing regulatory info from EEPROM\n");
-
- priv->channel_count =
- ARRAY_SIZE(iwl3945_eeprom_band_1) +
- ARRAY_SIZE(iwl3945_eeprom_band_2) +
- ARRAY_SIZE(iwl3945_eeprom_band_3) +
- ARRAY_SIZE(iwl3945_eeprom_band_4) +
- ARRAY_SIZE(iwl3945_eeprom_band_5);
-
- IWL_DEBUG_INFO("Parsing data for %d channels.\n", priv->channel_count);
-
- priv->channel_info = kzalloc(sizeof(struct iwl_channel_info) *
- priv->channel_count, GFP_KERNEL);
- if (!priv->channel_info) {
- IWL_ERR(priv, "Could not allocate channel_info\n");
- priv->channel_count = 0;
- return -ENOMEM;
- }
-
- ch_info = priv->channel_info;
-
- /* Loop through the 5 EEPROM bands adding them in order to the
- * channel map we maintain (that contains additional information than
- * what just in the EEPROM) */
- for (band = 1; band <= 5; band++) {
-
- iwl3945_init_band_reference(priv, band, &eeprom_ch_count,
- &eeprom_ch_info, &eeprom_ch_index);
-
- /* Loop through each band adding each of the channels */
- for (ch = 0; ch < eeprom_ch_count; ch++) {
- ch_info->channel = eeprom_ch_index[ch];
- ch_info->band = (band == 1) ? IEEE80211_BAND_2GHZ :
- IEEE80211_BAND_5GHZ;
-
- /* permanently store EEPROM's channel regulatory flags
- * and max power in channel info database. */
- ch_info->eeprom = eeprom_ch_info[ch];
-
- /* Copy the run-time flags so they are there even on
- * invalid channels */
- ch_info->flags = eeprom_ch_info[ch].flags;
-
- if (!(is_channel_valid(ch_info))) {
- IWL_DEBUG_INFO("Ch. %d Flags %x [%sGHz] - "
- "No traffic\n",
- ch_info->channel,
- ch_info->flags,
- is_channel_a_band(ch_info) ?
- "5.2" : "2.4");
- ch_info++;
- continue;
- }
-
- /* Initialize regulatory-based run-time data */
- ch_info->max_power_avg = ch_info->curr_txpow =
- eeprom_ch_info[ch].max_power_avg;
- ch_info->scan_power = eeprom_ch_info[ch].max_power_avg;
- ch_info->min_power = 0;
-
- IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x"
- " %ddBm): Ad-Hoc %ssupported\n",
- ch_info->channel,
- is_channel_a_band(ch_info) ?
- "5.2" : "2.4",
- CHECK_AND_PRINT(VALID),
- CHECK_AND_PRINT(IBSS),
- CHECK_AND_PRINT(ACTIVE),
- CHECK_AND_PRINT(RADAR),
- CHECK_AND_PRINT(WIDE),
- CHECK_AND_PRINT(DFS),
- eeprom_ch_info[ch].flags,
- eeprom_ch_info[ch].max_power_avg,
- ((eeprom_ch_info[ch].
- flags & EEPROM_CHANNEL_IBSS)
- && !(eeprom_ch_info[ch].
- flags & EEPROM_CHANNEL_RADAR))
- ? "" : "not ");
-
- /* Set the tx_power_user_lmt to the highest power
- * supported by any channel */
- if (eeprom_ch_info[ch].max_power_avg >
- priv->tx_power_user_lmt)
- priv->tx_power_user_lmt =
- eeprom_ch_info[ch].max_power_avg;
-
- ch_info++;
- }
- }
-
- /* Set up txpower settings in driver for all channels */
- if (iwl3945_txpower_set_from_eeprom(priv))
- return -EIO;
-
- return 0;
-}
-
-/*
- * iwl3945_free_channel_map - undo allocations in iwl3945_init_channel_map
- */
-static void iwl3945_free_channel_map(struct iwl_priv *priv)
-{
- kfree(priv->channel_info);
- priv->channel_count = 0;
-}
-
-/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
- * sending probe req. This should be set long enough to hear probe responses
- * from more than one AP. */
-#define IWL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */
-#define IWL_ACTIVE_DWELL_TIME_52 (20)
-
-#define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3)
-#define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2)
-
-/* For faster active scanning, scan will move to the next channel if fewer than
- * PLCP_QUIET_THRESH packets are heard on this channel within
- * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell
- * time if it's a quiet channel (nothing responded to our probe, and there's
- * no other traffic).
- * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
-#define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */
-#define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(10) /* msec */
-
-/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
- * Must be set longer than active dwell time.
- * For the most reliable scan, set > AP beacon interval (typically 100msec). */
-#define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */
-#define IWL_PASSIVE_DWELL_TIME_52 (10)
-#define IWL_PASSIVE_DWELL_BASE (100)
-#define IWL_CHANNEL_TUNE_TIME 5
-
-#define IWL_SCAN_PROBE_MASK(n) (BIT(n) | (BIT(n) - BIT(1)))
-
-static inline u16 iwl3945_get_active_dwell_time(struct iwl_priv *priv,
- enum ieee80211_band band,
- u8 n_probes)
-{
- if (band == IEEE80211_BAND_5GHZ)
- return IWL_ACTIVE_DWELL_TIME_52 +
- IWL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1);
- else
- return IWL_ACTIVE_DWELL_TIME_24 +
- IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1);
-}
-
-static u16 iwl3945_get_passive_dwell_time(struct iwl_priv *priv,
- enum ieee80211_band band)
-{
- u16 passive = (band == IEEE80211_BAND_2GHZ) ?
- IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
- IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
-
- if (iwl3945_is_associated(priv)) {
- /* If we're associated, we clamp the maximum passive
- * dwell time to be 98% of the beacon interval (minus
- * 2 * channel tune time) */
- passive = priv->beacon_int;
- if ((passive > IWL_PASSIVE_DWELL_BASE) || !passive)
- passive = IWL_PASSIVE_DWELL_BASE;
- passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
- }
-
- return passive;
-}
-
static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
enum ieee80211_band band,
u8 is_active, u8 n_probes,
channels = sband->channels;
- active_dwell = iwl3945_get_active_dwell_time(priv, band, n_probes);
- passive_dwell = iwl3945_get_passive_dwell_time(priv, band);
+ active_dwell = iwl_get_active_dwell_time(priv, band, n_probes);
+ passive_dwell = iwl_get_passive_dwell_time(priv, band);
if (passive_dwell <= active_dwell)
passive_dwell = active_dwell + 1;
scan_ch->channel = channels[i].hw_value;
- ch_info = iwl3945_get_channel_info(priv, band, scan_ch->channel);
+ ch_info = iwl_get_channel_info(priv, band, scan_ch->channel);
if (!is_channel_valid(ch_info)) {
IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
scan_ch->channel);
}
}
-/**
- * iwl3945_init_geos - Initialize mac80211's geo/channel info based from eeprom
- */
-static int iwl3945_init_geos(struct iwl_priv *priv)
-{
- struct iwl_channel_info *ch;
- struct ieee80211_supported_band *sband;
- struct ieee80211_channel *channels;
- struct ieee80211_channel *geo_ch;
- struct ieee80211_rate *rates;
- int i = 0;
-
- if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
- priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
- IWL_DEBUG_INFO("Geography modes already initialized.\n");
- set_bit(STATUS_GEO_CONFIGURED, &priv->status);
- return 0;
- }
-
- channels = kzalloc(sizeof(struct ieee80211_channel) *
- priv->channel_count, GFP_KERNEL);
- if (!channels)
- return -ENOMEM;
-
- rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)),
- GFP_KERNEL);
- if (!rates) {
- kfree(channels);
- return -ENOMEM;
- }
-
- /* 5.2GHz channels start after the 2.4GHz channels */
- sband = &priv->bands[IEEE80211_BAND_5GHZ];
- sband->channels = &channels[ARRAY_SIZE(iwl3945_eeprom_band_1)];
- /* just OFDM */
- sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
- sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE;
-
- sband = &priv->bands[IEEE80211_BAND_2GHZ];
- sband->channels = channels;
- /* OFDM & CCK */
- sband->bitrates = rates;
- sband->n_bitrates = IWL_RATE_COUNT;
-
- priv->ieee_channels = channels;
- priv->ieee_rates = rates;
-
- iwl3945_init_hw_rates(priv, rates);
-
- for (i = 0; i < priv->channel_count; i++) {
- ch = &priv->channel_info[i];
-
- /* FIXME: might be removed if scan is OK*/
- if (!is_channel_valid(ch))
- continue;
-
- if (is_channel_a_band(ch))
- sband = &priv->bands[IEEE80211_BAND_5GHZ];
- else
- sband = &priv->bands[IEEE80211_BAND_2GHZ];
-
- geo_ch = &sband->channels[sband->n_channels++];
-
- geo_ch->center_freq = ieee80211_channel_to_frequency(ch->channel);
- geo_ch->max_power = ch->max_power_avg;
- geo_ch->max_antenna_gain = 0xff;
- geo_ch->hw_value = ch->channel;
-
- if (is_channel_valid(ch)) {
- if (!(ch->flags & EEPROM_CHANNEL_IBSS))
- geo_ch->flags |= IEEE80211_CHAN_NO_IBSS;
-
- if (!(ch->flags & EEPROM_CHANNEL_ACTIVE))
- geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
-
- if (ch->flags & EEPROM_CHANNEL_RADAR)
- geo_ch->flags |= IEEE80211_CHAN_RADAR;
-
- if (ch->max_power_avg > priv->tx_power_channel_lmt)
- priv->tx_power_channel_lmt =
- ch->max_power_avg;
- } else {
- geo_ch->flags |= IEEE80211_CHAN_DISABLED;
- }
-
- /* Save flags for reg domain usage */
- geo_ch->orig_flags = geo_ch->flags;
-
- IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0%X\n",
- ch->channel, geo_ch->center_freq,
- is_channel_a_band(ch) ? "5.2" : "2.4",
- geo_ch->flags & IEEE80211_CHAN_DISABLED ?
- "restricted" : "valid",
- geo_ch->flags);
- }
-
- if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
- priv->cfg->sku & IWL_SKU_A) {
- IWL_INFO(priv, "Incorrectly detected BG card as ABG. "
- "Please send your PCI ID 0x%04X:0x%04X to maintainer.\n",
- priv->pci_dev->device, priv->pci_dev->subsystem_device);
- priv->cfg->sku &= ~IWL_SKU_A;
- }
-
- IWL_INFO(priv, "Tunable channels: %d 802.11bg, %d 802.11a channels\n",
- priv->bands[IEEE80211_BAND_2GHZ].n_channels,
- priv->bands[IEEE80211_BAND_5GHZ].n_channels);
-
- if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
- priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
- &priv->bands[IEEE80211_BAND_2GHZ];
- if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
- priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
- &priv->bands[IEEE80211_BAND_5GHZ];
-
- set_bit(STATUS_GEO_CONFIGURED, &priv->status);
-
- return 0;
-}
-
-/*
- * iwl3945_free_geos - undo allocations in iwl3945_init_geos
- */
-static void iwl3945_free_geos(struct iwl_priv *priv)
-{
- kfree(priv->ieee_channels);
- kfree(priv->ieee_rates);
- clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
-}
-
/******************************************************************************
*
* uCode download functions
}
#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
-
-static void iwl3945_bg_scan_check(struct work_struct *data)
-{
- struct iwl_priv *priv =
- container_of(data, struct iwl_priv, scan_check.work);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
- if (test_bit(STATUS_SCANNING, &priv->status) ||
- test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
- IWL_DEBUG(IWL_DL_INFO | IWL_DL_SCAN,
- "Scan completion watchdog resetting adapter (%dms)\n",
- jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG));
-
- if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
- iwl3945_send_scan_abort(priv);
- }
- mutex_unlock(&priv->mutex);
-}
-
static void iwl3945_bg_request_scan(struct work_struct *data)
{
struct iwl_priv *priv =
/* We don't build a direct scan probe request; the uCode will do
* that based on the direct_mask added to each channel entry */
- scan->tx_cmd.len = cpu_to_le16(
- iwl3945_fill_probe_req(priv, (struct ieee80211_mgmt *)scan->data,
- IWL_MAX_SCAN_SIZE - sizeof(*scan)));
scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id;
scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
goto done;
}
+ scan->tx_cmd.len = cpu_to_le16(
+ iwl_fill_probe_req(priv, band,
+ (struct ieee80211_mgmt *)scan->data,
+ IWL_MAX_SCAN_SIZE - sizeof(*scan)));
+
/* select Rx antennas */
scan->flags |= iwl3945_get_antenna_flags(priv);
priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN;
}
-static void iwl3945_bg_abort_scan(struct work_struct *work)
-{
- struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);
-
- if (!iwl_is_ready(priv))
- return;
-
- mutex_lock(&priv->mutex);
-
- set_bit(STATUS_SCAN_ABORTING, &priv->status);
- iwl3945_send_scan_abort(priv);
-
- mutex_unlock(&priv->mutex);
-}
-
static int iwl3945_mac_config(struct ieee80211_hw *hw, u32 changed);
-static void iwl3945_bg_scan_completed(struct work_struct *work)
-{
- struct iwl_priv *priv =
- container_of(work, struct iwl_priv, scan_completed);
-
- IWL_DEBUG(IWL_DL_INFO | IWL_DL_SCAN, "SCAN complete scan\n");
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- if (test_bit(STATUS_CONF_PENDING, &priv->status))
- iwl3945_mac_config(priv->hw, 0);
-
- ieee80211_scan_completed(priv->hw);
-
- /* Since setting the TXPOWER may have been deferred while
- * performing the scan, fire one off */
- mutex_lock(&priv->mutex);
- iwl3945_hw_reg_send_txpower(priv);
- mutex_unlock(&priv->mutex);
-}
-
/*****************************************************************************
*
* mac80211 entry point functions
spin_lock_irqsave(&priv->lock, flags);
- ch_info = iwl3945_get_channel_info(priv, conf->channel->band,
- conf->channel->hw_value);
+ ch_info = iwl_get_channel_info(priv, conf->channel->band,
+ conf->channel->hw_value);
if (!is_channel_valid(ch_info)) {
IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this band.\n",
conf->channel->hw_value, conf->channel->band);
*
*****************************************************************************/
-#ifdef CONFIG_IWL3945_DEBUG
+#ifdef CONFIG_IWLWIFI_DEBUG
/*
* The following adds a new attribute to the sysfs representation
static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
show_debug_level, store_debug_level);
-#endif /* CONFIG_IWL3945_DEBUG */
+#endif /* CONFIG_IWLWIFI_DEBUG */
static ssize_t show_temperature(struct device *d,
struct device_attribute *attr, char *buf)
INIT_WORK(&priv->up, iwl3945_bg_up);
INIT_WORK(&priv->restart, iwl3945_bg_restart);
INIT_WORK(&priv->rx_replenish, iwl3945_bg_rx_replenish);
- INIT_WORK(&priv->scan_completed, iwl3945_bg_scan_completed);
- INIT_WORK(&priv->request_scan, iwl3945_bg_request_scan);
- INIT_WORK(&priv->abort_scan, iwl3945_bg_abort_scan);
INIT_WORK(&priv->rf_kill, iwl_bg_rf_kill);
INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update);
INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start);
INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start);
- INIT_DELAYED_WORK(&priv->scan_check, iwl3945_bg_scan_check);
INIT_DELAYED_WORK(&priv->rfkill_poll, iwl3945_rfkill_poll);
+ INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed);
+ INIT_WORK(&priv->request_scan, iwl3945_bg_request_scan);
+ INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan);
+ INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
iwl3945_hw_setup_deferred_work(priv);
&dev_attr_status.attr,
&dev_attr_temperature.attr,
&dev_attr_tx_power.attr,
-#ifdef CONFIG_IWL3945_DEBUG
+#ifdef CONFIG_IWLWIFI_DEBUG
&dev_attr_debug_level.attr,
#endif
NULL
static int iwl3945_init_drv(struct iwl_priv *priv)
{
int ret;
+ struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
priv->retry_rate = 1;
priv->ibss_beacon = NULL;
priv->power_mode = IWL39_POWER_AC;
priv->tx_power_user_lmt = IWL_DEFAULT_TX_POWER;
- ret = iwl3945_init_channel_map(priv);
+ if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
+ IWL_WARN(priv, "Unsupported EEPROM version: 0x%04X\n",
+ eeprom->version);
+ ret = -EINVAL;
+ goto err;
+ }
+ ret = iwl_init_channel_map(priv);
if (ret) {
IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
goto err;
}
- ret = iwl3945_init_geos(priv);
+ /* Set up txpower settings in driver for all channels */
+ if (iwl3945_txpower_set_from_eeprom(priv)) {
+ ret = -EIO;
+ goto err_free_channel_map;
+ }
+
+ ret = iwlcore_init_geos(priv);
if (ret) {
IWL_ERR(priv, "initializing geos failed: %d\n", ret);
goto err_free_channel_map;
}
+ iwl3945_init_hw_rates(priv, priv->ieee_rates);
+
+ if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
+ priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+ &priv->bands[IEEE80211_BAND_2GHZ];
+ if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
+ priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+ &priv->bands[IEEE80211_BAND_5GHZ];
return 0;
err_free_channel_map:
- iwl3945_free_channel_map(priv);
+ iwl_free_channel_map(priv);
err:
return ret;
}
struct iwl_priv *priv;
struct ieee80211_hw *hw;
struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data);
+ struct iwl3945_eeprom *eeprom;
unsigned long flags;
/***********************
priv->cfg = cfg;
priv->pci_dev = pdev;
-#ifdef CONFIG_IWL3945_DEBUG
+#ifdef CONFIG_IWLWIFI_DEBUG
priv->debug_level = iwl3945_mod_params.debug;
atomic_set(&priv->restrict_refcnt, 0);
#endif
* ********************/
/* Read the EEPROM */
- err = iwl3945_eeprom_init(priv);
+ err = iwl_eeprom_init(priv);
if (err) {
IWL_ERR(priv, "Unable to init EEPROM\n");
goto out_remove_sysfs;
}
/* MAC Address location in EEPROM same for 3945/4965 */
- get_eeprom_mac(priv, priv->mac_addr);
+ eeprom = (struct iwl3945_eeprom *)priv->eeprom;
+ memcpy(priv->mac_addr, eeprom->mac_address, ETH_ALEN);
IWL_DEBUG_INFO("MAC address: %pM\n", priv->mac_addr);
SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
out_remove_sysfs:
sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
out_free_geos:
- iwl3945_free_geos(priv);
+ iwlcore_free_geos(priv);
out_release_irq:
free_irq(priv->pci_dev->irq, priv);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
- iwl3945_free_channel_map(priv);
- iwl3945_free_geos(priv);
+ iwl_free_channel_map(priv);
+ iwlcore_free_geos(priv);
kfree(priv->scan);
if (priv->ibss_beacon)
dev_kfree_skb(priv->ibss_beacon);