u8 data[0];
} __attribute__ ((packed));
+
+/**
+ * struct iwl3945_tx_power
+ *
+ * Used in REPLY_TX_PWR_TABLE_CMD, REPLY_SCAN_CMD, REPLY_CHANNEL_SWITCH
+ *
+ * Each entry contains two values:
+ * 1) DSP gain (or sometimes called DSP attenuation). This is a fine-grained
+ * linear value that multiplies the output of the digital signal processor,
+ * before being sent to the analog radio.
+ * 2) Radio gain. This sets the analog gain of the radio Tx path.
+ * It is a coarser setting, and behaves in a logarithmic (dB) fashion.
+ *
+ * Driver obtains values from struct iwl3945_tx_power power_gain_table[][].
+ */
+struct iwl3945_tx_power {
+ u8 tx_gain; /* gain for analog radio */
+ u8 dsp_atten; /* gain for DSP */
+} __attribute__ ((packed));
+
+/**
+ * struct iwl3945_power_per_rate
+ *
+ * Used in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH
+ */
+struct iwl3945_power_per_rate {
+ u8 rate; /* plcp */
+ struct iwl3945_tx_power tpc;
+ u8 reserved;
+} __attribute__ ((packed));
+
/**
* iwlagn rate_n_flags bit fields
*
__le32 is_valid;
} __attribute__ ((packed));
-
-
/*
* REPLY_ERROR = 0x2 (response only, not a command)
*/
* issue a new REPLY_TX_PWR_TABLE_CMD after each REPLY_RXON (0x10),
* regardless of whether RXON_FILTER_ASSOC_MSK is set.
*/
+
+struct iwl3945_rxon_cmd {
+ u8 node_addr[6];
+ __le16 reserved1;
+ u8 bssid_addr[6];
+ __le16 reserved2;
+ u8 wlap_bssid_addr[6];
+ __le16 reserved3;
+ u8 dev_type;
+ u8 air_propagation;
+ __le16 reserved4;
+ u8 ofdm_basic_rates;
+ u8 cck_basic_rates;
+ __le16 assoc_id;
+ __le32 flags;
+ __le32 filter_flags;
+ __le16 channel;
+ __le16 reserved5;
+} __attribute__ ((packed));
+
struct iwl4965_rxon_cmd {
u8 node_addr[6];
__le16 reserved1;
__le16 reserved6;
} __attribute__ ((packed));
-struct iwl5000_rxon_assoc_cmd {
+/*
+ * REPLY_RXON_ASSOC = 0x11 (command, has simple generic response)
+ */
+struct iwl3945_rxon_assoc_cmd {
+ __le32 flags;
+ __le32 filter_flags;
+ u8 ofdm_basic_rates;
+ u8 cck_basic_rates;
+ __le16 reserved;
+} __attribute__ ((packed));
+
+struct iwl4965_rxon_assoc_cmd {
__le32 flags;
__le32 filter_flags;
u8 ofdm_basic_rates;
u8 cck_basic_rates;
- __le16 reserved1;
u8 ofdm_ht_single_stream_basic_rates;
u8 ofdm_ht_dual_stream_basic_rates;
- u8 ofdm_ht_triple_stream_basic_rates;
- u8 reserved2;
__le16 rx_chain_select_flags;
- __le16 acquisition_data;
- __le32 reserved3;
+ __le16 reserved;
} __attribute__ ((packed));
-/*
- * REPLY_RXON_ASSOC = 0x11 (command, has simple generic response)
- */
-struct iwl4965_rxon_assoc_cmd {
+struct iwl5000_rxon_assoc_cmd {
__le32 flags;
__le32 filter_flags;
u8 ofdm_basic_rates;
u8 cck_basic_rates;
+ __le16 reserved1;
u8 ofdm_ht_single_stream_basic_rates;
u8 ofdm_ht_dual_stream_basic_rates;
+ u8 ofdm_ht_triple_stream_basic_rates;
+ u8 reserved2;
__le16 rx_chain_select_flags;
- __le16 reserved;
+ __le16 acquisition_data;
+ __le32 reserved3;
} __attribute__ ((packed));
#define IWL_CONN_MAX_LISTEN_INTERVAL 10
/*
* REPLY_CHANNEL_SWITCH = 0x72 (command, has simple generic response)
*/
+struct iwl3945_channel_switch_cmd {
+ u8 band;
+ u8 expect_beacon;
+ __le16 channel;
+ __le32 rxon_flags;
+ __le32 rxon_filter_flags;
+ __le32 switch_time;
+ struct iwl3945_power_per_rate power[IWL_MAX_RATES];
+} __attribute__ ((packed));
+
struct iwl_channel_switch_cmd {
u8 band;
u8 expect_beacon;
* used as AP, or in an IBSS network, driver must set up station table
* entries for all STAs in network, starting with index IWL_STA_ID.
*/
+
+struct iwl3945_addsta_cmd {
+ u8 mode; /* 1: modify existing, 0: add new station */
+ u8 reserved[3];
+ struct sta_id_modify sta;
+ struct iwl4965_keyinfo key;
+ __le32 station_flags; /* STA_FLG_* */
+ __le32 station_flags_msk; /* STA_FLG_* */
+
+ /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID)
+ * corresponding to bit (e.g. bit 5 controls TID 5).
+ * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */
+ __le16 tid_disable_tx;
+
+ __le16 rate_n_flags;
+
+ /* TID for which to add block-ack support.
+ * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
+ u8 add_immediate_ba_tid;
+
+ /* TID for which to remove block-ack support.
+ * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */
+ u8 remove_immediate_ba_tid;
+
+ /* Starting Sequence Number for added block-ack support.
+ * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
+ __le16 add_immediate_ba_ssn;
+} __attribute__ ((packed));
+
struct iwl4965_addsta_cmd {
u8 mode; /* 1: modify existing, 0: add new station */
u8 reserved[3];
#define RX_MPDU_RES_STATUS_TTAK_OK (1 << 7)
#define RX_MPDU_RES_STATUS_DEC_DONE_MSK (0x800)
+
+struct iwl3945_rx_frame_stats {
+ u8 phy_count;
+ u8 id;
+ u8 rssi;
+ u8 agc;
+ __le16 sig_avg;
+ __le16 noise_diff;
+ u8 payload[0];
+} __attribute__ ((packed));
+
+struct iwl3945_rx_frame_hdr {
+ __le16 channel;
+ __le16 phy_flags;
+ u8 reserved1;
+ u8 rate;
+ __le16 len;
+ u8 payload[0];
+} __attribute__ ((packed));
+
+struct iwl3945_rx_frame_end {
+ __le32 status;
+ __le64 timestamp;
+ __le32 beacon_timestamp;
+} __attribute__ ((packed));
+
+/*
+ * REPLY_3945_RX = 0x1b (response only, not a command)
+ *
+ * NOTE: DO NOT dereference from casts to this structure
+ * It is provided only for calculating minimum data set size.
+ * The actual offsets of the hdr and end are dynamic based on
+ * stats.phy_count
+ */
+struct iwl3945_rx_frame {
+ struct iwl3945_rx_frame_stats stats;
+ struct iwl3945_rx_frame_hdr hdr;
+ struct iwl3945_rx_frame_end end;
+} __attribute__ ((packed));
+
+#define IWL39_RX_FRAME_SIZE (4 + sizeof(struct iwl3945_rx_frame))
+
/* Fixed (non-configurable) rx data from phy */
#define IWL49_RX_RES_PHY_CNT 14
#define CCMP_MIC_LEN 8
#define TKIP_ICV_LEN 4
+/*
+ * REPLY_TX = 0x1c (command)
+ */
+
+struct iwl3945_tx_cmd {
+ /*
+ * MPDU byte count:
+ * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size,
+ * + 8 byte IV for CCM or TKIP (not used for WEP)
+ * + Data payload
+ * + 8-byte MIC (not used for CCM/WEP)
+ * NOTE: Does not include Tx command bytes, post-MAC pad bytes,
+ * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i
+ * Range: 14-2342 bytes.
+ */
+ __le16 len;
+
+ /*
+ * MPDU or MSDU byte count for next frame.
+ * Used for fragmentation and bursting, but not 11n aggregation.
+ * Same as "len", but for next frame. Set to 0 if not applicable.
+ */
+ __le16 next_frame_len;
+
+ __le32 tx_flags; /* TX_CMD_FLG_* */
+
+ u8 rate;
+
+ /* Index of recipient station in uCode's station table */
+ u8 sta_id;
+ u8 tid_tspec;
+ u8 sec_ctl;
+ u8 key[16];
+ union {
+ u8 byte[8];
+ __le16 word[4];
+ __le32 dw[2];
+ } tkip_mic;
+ __le32 next_frame_info;
+ union {
+ __le32 life_time;
+ __le32 attempt;
+ } stop_time;
+ u8 supp_rates[2];
+ u8 rts_retry_limit; /*byte 50 */
+ u8 data_retry_limit; /*byte 51 */
+ union {
+ __le16 pm_frame_timeout;
+ __le16 attempt_duration;
+ } timeout;
+
+ /*
+ * Duration of EDCA burst Tx Opportunity, in 32-usec units.
+ * Set this if txop time is not specified by HCCA protocol (e.g. by AP).
+ */
+ __le16 driver_txop;
+
+ /*
+ * MAC header goes here, followed by 2 bytes padding if MAC header
+ * length is 26 or 30 bytes, followed by payload data
+ */
+ u8 payload[0];
+ struct ieee80211_hdr hdr[0];
+} __attribute__ ((packed));
+
+/*
+ * REPLY_TX = 0x1c (response)
+ */
+struct iwl3945_tx_resp {
+ u8 failure_rts;
+ u8 failure_frame;
+ u8 bt_kill_count;
+ u8 rate;
+ __le32 wireless_media_time;
+ __le32 status; /* TX status */
+} __attribute__ ((packed));
+
+
/*
* 4965 uCode updates these Tx attempt count values in host DRAM.
* Used for managing Tx retries when expecting block-acks.
__le16 reserved;
} __attribute__ ((packed));
-/*
- * REPLY_TX = 0x1c (command)
- */
struct iwl_tx_cmd {
/*
* MPDU byte count:
*
* See details under "TXPOWER" in iwl-4965-hw.h.
*/
+
+struct iwl3945_txpowertable_cmd {
+ u8 band; /* 0: 5 GHz, 1: 2.4 GHz */
+ u8 reserved;
+ __le16 channel;
+ struct iwl3945_power_per_rate power[IWL_MAX_RATES];
+} __attribute__ ((packed));
+
struct iwl4965_txpowertable_cmd {
u8 band; /* 0: 5 GHz, 1: 2.4 GHz */
u8 reserved;
struct iwl4965_tx_power_db tx_power;
} __attribute__ ((packed));
+
+/**
+ * struct iwl3945_rate_scaling_cmd - Rate Scaling Command & Response
+ *
+ * REPLY_RATE_SCALE = 0x47 (command, has simple generic response)
+ *
+ * NOTE: The table of rates passed to the uCode via the
+ * RATE_SCALE command sets up the corresponding order of
+ * rates used for all related commands, including rate
+ * masks, etc.
+ *
+ * For example, if you set 9MB (PLCP 0x0f) as the first
+ * rate in the rate table, the bit mask for that rate
+ * when passed through ofdm_basic_rates on the REPLY_RXON
+ * command would be bit 0 (1 << 0)
+ */
+struct iwl3945_rate_scaling_info {
+ __le16 rate_n_flags;
+ u8 try_cnt;
+ u8 next_rate_index;
+} __attribute__ ((packed));
+
+struct iwl3945_rate_scaling_cmd {
+ u8 table_id;
+ u8 reserved[3];
+ struct iwl3945_rate_scaling_info table[IWL_MAX_RATES];
+} __attribute__ ((packed));
+
+
/*RS_NEW_API: only TLC_RTS remains and moved to bit 0 */
#define LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK (1 << 0)
* passive_dwell < max_out_time
* active_dwell < max_out_time
*/
+
+/* FIXME: rename to AP1, remove tpc */
+struct iwl3945_scan_channel {
+ /*
+ * type is defined as:
+ * 0:0 1 = active, 0 = passive
+ * 1:4 SSID direct bit map; if a bit is set, then corresponding
+ * SSID IE is transmitted in probe request.
+ * 5:7 reserved
+ */
+ u8 type;
+ u8 channel; /* band is selected by iwl3945_scan_cmd "flags" field */
+ struct iwl3945_tx_power tpc;
+ __le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */
+ __le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */
+} __attribute__ ((packed));
+
struct iwl_scan_channel {
/*
* type is defined as:
* To avoid uCode errors, see timing restrictions described under
* struct iwl_scan_channel.
*/
+
+struct iwl3945_scan_cmd {
+ __le16 len;
+ u8 reserved0;
+ u8 channel_count; /* # channels in channel list */
+ __le16 quiet_time; /* dwell only this # millisecs on quiet channel
+ * (only for active scan) */
+ __le16 quiet_plcp_th; /* quiet chnl is < this # pkts (typ. 1) */
+ __le16 good_CRC_th; /* passive -> active promotion threshold */
+ __le16 reserved1;
+ __le32 max_out_time; /* max usec to be away from associated (service)
+ * channel */
+ __le32 suspend_time; /* pause scan this long (in "extended beacon
+ * format") when returning to service channel:
+ * 3945; 31:24 # beacons, 19:0 additional usec,
+ * 4965; 31:22 # beacons, 21:0 additional usec.
+ */
+ __le32 flags; /* RXON_FLG_* */
+ __le32 filter_flags; /* RXON_FILTER_* */
+
+ /* For active scans (set to all-0s for passive scans).
+ * Does not include payload. Must specify Tx rate; no rate scaling. */
+ struct iwl3945_tx_cmd tx_cmd;
+
+ /* For directed active scans (set to all-0s otherwise) */
+ struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX_API1];
+
+ /*
+ * Probe request frame, followed by channel list.
+ *
+ * Size of probe request frame is specified by byte count in tx_cmd.
+ * Channel list follows immediately after probe request frame.
+ * Number of channels in list is specified by channel_count.
+ * Each channel in list is of type:
+ *
+ * struct iwl3945_scan_channel channels[0];
+ *
+ * NOTE: Only one band of channels can be scanned per pass. You
+ * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait
+ * for one scan to complete (i.e. receive SCAN_COMPLETE_NOTIFICATION)
+ * before requesting another scan.
+ */
+ u8 data[0];
+} __attribute__ ((packed));
+
struct iwl_scan_cmd {
__le16 len;
u8 reserved0;
/*
* BEACON_NOTIFICATION = 0x90 (notification only, not a command)
*/
+
+struct iwl3945_beacon_notif {
+ struct iwl3945_tx_resp beacon_notify_hdr;
+ __le32 low_tsf;
+ __le32 high_tsf;
+ __le32 ibss_mgr_status;
+} __attribute__ ((packed));
+
struct iwl4965_beacon_notif {
struct iwl4965_tx_resp beacon_notify_hdr;
__le32 low_tsf;
/*
* REPLY_TX_BEACON = 0x91 (command, has simple generic response)
*/
+
+struct iwl3945_tx_beacon_cmd {
+ struct iwl3945_tx_cmd tx;
+ __le16 tim_idx;
+ u8 tim_size;
+ u8 reserved1;
+ struct ieee80211_hdr frame[0]; /* beacon frame */
+} __attribute__ ((packed));
+
struct iwl_tx_beacon_cmd {
struct iwl_tx_cmd tx;
__le16 tim_idx;
/* statistics command response */
+struct iwl39_statistics_rx_phy {
+ __le32 ina_cnt;
+ __le32 fina_cnt;
+ __le32 plcp_err;
+ __le32 crc32_err;
+ __le32 overrun_err;
+ __le32 early_overrun_err;
+ __le32 crc32_good;
+ __le32 false_alarm_cnt;
+ __le32 fina_sync_err_cnt;
+ __le32 sfd_timeout;
+ __le32 fina_timeout;
+ __le32 unresponded_rts;
+ __le32 rxe_frame_limit_overrun;
+ __le32 sent_ack_cnt;
+ __le32 sent_cts_cnt;
+} __attribute__ ((packed));
+
+struct iwl39_statistics_rx_non_phy {
+ __le32 bogus_cts; /* CTS received when not expecting CTS */
+ __le32 bogus_ack; /* ACK received when not expecting ACK */
+ __le32 non_bssid_frames; /* number of frames with BSSID that
+ * doesn't belong to the STA BSSID */
+ __le32 filtered_frames; /* count frames that were dumped in the
+ * filtering process */
+ __le32 non_channel_beacons; /* beacons with our bss id but not on
+ * our serving channel */
+} __attribute__ ((packed));
+
+struct iwl39_statistics_rx {
+ struct iwl39_statistics_rx_phy ofdm;
+ struct iwl39_statistics_rx_phy cck;
+ struct iwl39_statistics_rx_non_phy general;
+} __attribute__ ((packed));
+
+struct iwl39_statistics_tx {
+ __le32 preamble_cnt;
+ __le32 rx_detected_cnt;
+ __le32 bt_prio_defer_cnt;
+ __le32 bt_prio_kill_cnt;
+ __le32 few_bytes_cnt;
+ __le32 cts_timeout;
+ __le32 ack_timeout;
+ __le32 expected_ack_cnt;
+ __le32 actual_ack_cnt;
+} __attribute__ ((packed));
+
+struct statistics_dbg {
+ __le32 burst_check;
+ __le32 burst_count;
+ __le32 reserved[4];
+} __attribute__ ((packed));
+
+struct iwl39_statistics_div {
+ __le32 tx_on_a;
+ __le32 tx_on_b;
+ __le32 exec_time;
+ __le32 probe_time;
+} __attribute__ ((packed));
+
+struct iwl39_statistics_general {
+ __le32 temperature;
+ struct statistics_dbg dbg;
+ __le32 sleep_time;
+ __le32 slots_out;
+ __le32 slots_idle;
+ __le32 ttl_timestamp;
+ struct iwl39_statistics_div div;
+} __attribute__ ((packed));
+
struct statistics_rx_phy {
__le32 ina_cnt;
__le32 fina_cnt;
struct statistics_tx_non_phy_agg agg;
} __attribute__ ((packed));
-struct statistics_dbg {
- __le32 burst_check;
- __le32 burst_count;
- __le32 reserved[4];
-} __attribute__ ((packed));
struct statistics_div {
__le32 tx_on_a;
*/
#define STATISTICS_REPLY_FLG_BAND_24G_MSK cpu_to_le32(0x2)
#define STATISTICS_REPLY_FLG_FAT_MODE_MSK cpu_to_le32(0x8)
+
+struct iwl3945_notif_statistics {
+ __le32 flag;
+ struct iwl39_statistics_rx rx;
+ struct iwl39_statistics_tx tx;
+ struct iwl39_statistics_general general;
+} __attribute__ ((packed));
+
struct iwl_notif_statistics {
__le32 flag;
struct statistics_rx rx;
__le32 len;
struct iwl_cmd_header hdr;
union {
+ struct iwl3945_rx_frame rx_frame;
+ struct iwl3945_tx_resp tx_resp;
+ struct iwl3945_beacon_notif beacon_status;
+
struct iwl_alive_resp alive_frame;
struct iwl_spectrum_notification spectrum_notif;
struct iwl_csa_notification csa_notif;
git.openpandora.org / pandora-kernel.git / blobdiff