}
}
-static void iwl_clear_free_frames(struct iwl_priv *priv)
-{
- struct list_head *element;
-
- IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n",
- priv->frames_count);
-
- while (!list_empty(&priv->free_frames)) {
- element = priv->free_frames.next;
- list_del(element);
- kfree(list_entry(element, struct iwl_frame, list));
- priv->frames_count--;
- }
-
- if (priv->frames_count) {
- IWL_WARN(priv, "%d frames still in use. Did we lose one?\n",
- priv->frames_count);
- priv->frames_count = 0;
- }
-}
-
-static struct iwl_frame *iwl_get_free_frame(struct iwl_priv *priv)
-{
- struct iwl_frame *frame;
- struct list_head *element;
- if (list_empty(&priv->free_frames)) {
- frame = kzalloc(sizeof(*frame), GFP_KERNEL);
- if (!frame) {
- IWL_ERR(priv, "Could not allocate frame!\n");
- return NULL;
- }
-
- priv->frames_count++;
- return frame;
- }
-
- element = priv->free_frames.next;
- list_del(element);
- return list_entry(element, struct iwl_frame, list);
-}
-
-static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame)
-{
- memset(frame, 0, sizeof(*frame));
- list_add(&frame->list, &priv->free_frames);
-}
-
-static u32 iwl_fill_beacon_frame(struct iwl_priv *priv,
- struct ieee80211_hdr *hdr,
- int left)
-{
- lockdep_assert_held(&priv->mutex);
-
- if (!priv->beacon_skb)
- return 0;
-
- if (priv->beacon_skb->len > left)
- return 0;
-
- memcpy(hdr, priv->beacon_skb->data, priv->beacon_skb->len);
-
- return priv->beacon_skb->len;
-}
-
/* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
static void iwl_set_beacon_tim(struct iwl_priv *priv,
struct iwl_tx_beacon_cmd *tx_beacon_cmd,
IWL_WARN(priv, "Unable to find TIM Element in beacon\n");
}
-static unsigned int iwl_hw_get_beacon_cmd(struct iwl_priv *priv,
- struct iwl_frame *frame)
+int iwlagn_send_beacon_cmd(struct iwl_priv *priv)
{
struct iwl_tx_beacon_cmd *tx_beacon_cmd;
+ struct iwl_host_cmd cmd = {
+ .id = REPLY_TX_BEACON,
+ .flags = CMD_SIZE_HUGE,
+ };
u32 frame_size;
u32 rate_flags;
u32 rate;
+ int err;
+
/*
* We have to set up the TX command, the TX Beacon command, and the
* beacon contents.
return 0;
}
- /* Initialize memory */
- tx_beacon_cmd = &frame->u.beacon;
- memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
+ if (WARN_ON(!priv->beacon_skb))
+ return -EINVAL;
+
+ /* Allocate beacon memory */
+ tx_beacon_cmd = kzalloc(sizeof(*tx_beacon_cmd) + priv->beacon_skb->len,
+ GFP_KERNEL);
+ if (!tx_beacon_cmd)
+ return -ENOMEM;
+
+ frame_size = priv->beacon_skb->len;
/* Set up TX beacon contents */
- frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame,
- sizeof(frame->u) - sizeof(*tx_beacon_cmd));
- if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE))
- return 0;
- if (!frame_size)
- return 0;
+ memcpy(tx_beacon_cmd->frame, priv->beacon_skb->data, frame_size);
/* Set up TX command fields */
tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
tx_beacon_cmd->tx.rate_n_flags = iwl_hw_set_rate_n_flags(rate,
rate_flags);
- return sizeof(*tx_beacon_cmd) + frame_size;
-}
-
-int iwlagn_send_beacon_cmd(struct iwl_priv *priv)
-{
- struct iwl_frame *frame;
- unsigned int frame_size;
- int rc;
- struct iwl_host_cmd cmd = {
- .id = REPLY_TX_BEACON,
- .flags = CMD_SIZE_HUGE,
- };
-
- frame = iwl_get_free_frame(priv);
- if (!frame) {
- IWL_ERR(priv, "Could not obtain free frame buffer for beacon "
- "command.\n");
- return -ENOMEM;
- }
-
- frame_size = iwl_hw_get_beacon_cmd(priv, frame);
- if (!frame_size) {
- IWL_ERR(priv, "Error configuring the beacon command\n");
- iwl_free_frame(priv, frame);
- return -EINVAL;
- }
-
- cmd.len = frame_size;
- cmd.data = &frame->u.cmd[0];
+ /* Submit command */
+ cmd.len = sizeof(*tx_beacon_cmd) + frame_size;
+ cmd.data = tx_beacon_cmd;
- rc = iwl_send_cmd_sync(priv, &cmd);
+ err = iwl_send_cmd_sync(priv, &cmd);
- iwl_free_frame(priv, frame);
+ /* Free temporary storage */
+ kfree(tx_beacon_cmd);
- return rc;
+ return err;
}
static inline dma_addr_t iwl_tfd_tb_get_addr(struct iwl_tfd *tfd, u8 idx)
if (w->cmd == pkt->hdr.cmd) {
w->triggered = true;
if (w->fn)
- w->fn(priv, pkt);
+ w->fn(priv, pkt, w->fn_data);
}
}
spin_unlock(&priv->_agn.notif_wait_lock);
wake_up_all(&priv->_agn.notif_waitq);
}
+ if (priv->pre_rx_handler)
+ priv->pre_rx_handler(priv, rxb);
/* Based on type of command response or notification,
* handle those that need handling via function in
iwlagn_rx_queue_restock(priv);
}
-/* call this function to flush any scheduled tasklet */
-static inline void iwl_synchronize_irq(struct iwl_priv *priv)
-{
- /* wait to make sure we flush pending tasklet*/
- synchronize_irq(priv->pci_dev->irq);
- tasklet_kill(&priv->irq_tasklet);
-}
-
/* tasklet for iwlagn interrupt */
static void iwl_irq_tasklet(struct iwl_priv *priv)
{
*
******************************************************************************/
-static void iwl_dealloc_ucode_pci(struct iwl_priv *priv)
+static void iwl_free_fw_desc(struct pci_dev *pci_dev, struct fw_desc *desc)
{
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code);
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data);
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init);
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
+ if (desc->v_addr)
+ dma_free_coherent(&pci_dev->dev, desc->len,
+ desc->v_addr, desc->p_addr);
+ desc->v_addr = NULL;
+ desc->len = 0;
}
-static void iwl_nic_start(struct iwl_priv *priv)
+static void iwl_free_fw_img(struct pci_dev *pci_dev, struct fw_img *img)
{
- /* Remove all resets to allow NIC to operate */
- iwl_write32(priv, CSR_RESET, 0);
+ iwl_free_fw_desc(pci_dev, &img->code);
+ iwl_free_fw_desc(pci_dev, &img->data);
+}
+
+static int iwl_alloc_fw_desc(struct pci_dev *pci_dev, struct fw_desc *desc,
+ const void *data, size_t len)
+{
+ if (!len) {
+ desc->v_addr = NULL;
+ return -EINVAL;
+ }
+
+ desc->v_addr = dma_alloc_coherent(&pci_dev->dev, len,
+ &desc->p_addr, GFP_KERNEL);
+ if (!desc->v_addr)
+ return -ENOMEM;
+ desc->len = len;
+ memcpy(desc->v_addr, data, len);
+ return 0;
+}
+
+static void iwl_dealloc_ucode_pci(struct iwl_priv *priv)
+{
+ iwl_free_fw_img(priv->pci_dev, &priv->ucode_rt);
+ iwl_free_fw_img(priv->pci_dev, &priv->ucode_init);
}
struct iwlagn_ucode_capabilities {
/* Runtime instructions and 2 copies of data:
* 1) unmodified from disk
* 2) backup cache for save/restore during power-downs */
- priv->ucode_code.len = pieces.inst_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
-
- priv->ucode_data.len = pieces.data_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
-
- if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr)
+ if (iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_rt.code,
+ pieces.inst, pieces.inst_size))
+ goto err_pci_alloc;
+ if (iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_rt.data,
+ pieces.data, pieces.data_size))
goto err_pci_alloc;
/* Initialization instructions and data */
if (pieces.init_size && pieces.init_data_size) {
- priv->ucode_init.len = pieces.init_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
-
- priv->ucode_init_data.len = pieces.init_data_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
-
- if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
+ if (iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init.code,
+ pieces.init, pieces.init_size))
+ goto err_pci_alloc;
+ if (iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init.data,
+ pieces.init_data, pieces.init_data_size))
goto err_pci_alloc;
}
priv->cfg->base_params->max_event_log_size;
priv->_agn.inst_errlog_ptr = pieces.inst_errlog_ptr;
+ priv->new_scan_threshold_behaviour =
+ !!(ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NEWSCAN);
+
if (ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PAN) {
priv->valid_contexts |= BIT(IWL_RXON_CTX_PAN);
priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN;
else
priv->cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM;
- /* Copy images into buffers for card's bus-master reads ... */
-
- /* Runtime instructions (first block of data in file) */
- IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode instr len %Zd\n",
- pieces.inst_size);
- memcpy(priv->ucode_code.v_addr, pieces.inst, pieces.inst_size);
-
- IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
- priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
-
- /*
- * Runtime data
- * NOTE: Copy into backup buffer will be done in iwl_up()
- */
- IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode data len %Zd\n",
- pieces.data_size);
- memcpy(priv->ucode_data.v_addr, pieces.data, pieces.data_size);
-
- /* Initialization instructions */
- if (pieces.init_size) {
- IWL_DEBUG_INFO(priv, "Copying (but not loading) init instr len %Zd\n",
- pieces.init_size);
- memcpy(priv->ucode_init.v_addr, pieces.init, pieces.init_size);
- }
-
- /* Initialization data */
- if (pieces.init_data_size) {
- IWL_DEBUG_INFO(priv, "Copying (but not loading) init data len %Zd\n",
- pieces.init_data_size);
- memcpy(priv->ucode_init_data.v_addr, pieces.init_data,
- pieces.init_data_size);
- }
-
/*
* figure out the offset of chain noise reset and gain commands
* base on the size of standard phy calibration commands table size
max = ARRAY_SIZE(advanced_lookup) - 1;
for (i = 0; i < max; i++) {
if (advanced_lookup[i].num == num)
- break;;
+ break;
}
return advanced_lookup[i].name;
}
u32 desc, time, count, base, data1;
u32 blink1, blink2, ilink1, ilink2;
u32 pc, hcmd;
+ struct iwl_error_event_table table;
base = priv->device_pointers.error_event_table;
- if (priv->ucode_type == UCODE_INIT) {
+ if (priv->ucode_type == UCODE_SUBTYPE_INIT) {
if (!base)
base = priv->_agn.init_errlog_ptr;
} else {
if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
IWL_ERR(priv,
"Not valid error log pointer 0x%08X for %s uCode\n",
- base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
+ base,
+ (priv->ucode_type == UCODE_SUBTYPE_INIT)
+ ? "Init" : "RT");
return;
}
- count = iwl_read_targ_mem(priv, base);
+ iwl_read_targ_mem_words(priv, base, &table, sizeof(table));
+
+ count = table.valid;
if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
IWL_ERR(priv, "Start IWL Error Log Dump:\n");
priv->status, count);
}
- desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
+ desc = table.error_id;
priv->isr_stats.err_code = desc;
- pc = iwl_read_targ_mem(priv, base + 2 * sizeof(u32));
- blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
- blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
- ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
- ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
- data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
- data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
- line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
- time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
- hcmd = iwl_read_targ_mem(priv, base + 22 * sizeof(u32));
+ pc = table.pc;
+ blink1 = table.blink1;
+ blink2 = table.blink2;
+ ilink1 = table.ilink1;
+ ilink2 = table.ilink2;
+ data1 = table.data1;
+ data2 = table.data2;
+ line = table.line;
+ time = table.tsf_low;
+ hcmd = table.hcmd;
trace_iwlwifi_dev_ucode_error(priv, desc, time, data1, data2, line,
blink1, blink2, ilink1, ilink2);
return pos;
base = priv->device_pointers.log_event_table;
- if (priv->ucode_type == UCODE_INIT) {
+ if (priv->ucode_type == UCODE_SUBTYPE_INIT) {
if (!base)
base = priv->_agn.init_evtlog_ptr;
} else {
size_t bufsz = 0;
base = priv->device_pointers.log_event_table;
- if (priv->ucode_type == UCODE_INIT) {
+ if (priv->ucode_type == UCODE_SUBTYPE_INIT) {
logsize = priv->_agn.init_evtlog_size;
if (!base)
base = priv->_agn.init_evtlog_ptr;
if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
IWL_ERR(priv,
"Invalid event log pointer 0x%08X for %s uCode\n",
- base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
+ base,
+ (priv->ucode_type == UCODE_SUBTYPE_INIT)
+ ? "Init" : "RT");
return -EINVAL;
}
* from protocol/runtime uCode (initialization uCode's
* Alive gets handled by iwl_init_alive_start()).
*/
-static void iwl_alive_start(struct iwl_priv *priv)
+int iwl_alive_start(struct iwl_priv *priv)
{
int ret = 0;
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
-
- /* Initialize uCode has loaded Runtime uCode ... verify inst image.
- * This is a paranoid check, because we would not have gotten the
- * "runtime" alive if code weren't properly loaded. */
- if (iwl_verify_ucode(priv, &priv->ucode_code)) {
- /* Runtime instruction load was bad;
- * take it all the way back down so we can try again */
- IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n");
- goto restart;
- }
-
- ret = iwlagn_alive_notify(priv);
- if (ret) {
- IWL_WARN(priv,
- "Could not complete ALIVE transition [ntf]: %d\n", ret);
- goto restart;
- }
+ iwl_reset_ict(priv);
+ IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
/* After the ALIVE response, we can send host commands to the uCode */
set_bit(STATUS_ALIVE, &priv->status);
iwl_setup_watchdog(priv);
if (iwl_is_rfkill(priv))
- return;
+ return -ERFKILL;
/* download priority table before any calibration request */
if (priv->cfg->bt_params &&
iwlagn_send_prio_tbl(priv);
/* FIXME: w/a to force change uCode BT state machine */
- iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
- BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
- iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_CLOSE,
- BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
+ ret = iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
+ BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
+ if (ret)
+ return ret;
+ ret = iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_CLOSE,
+ BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
+ if (ret)
+ return ret;
}
if (priv->hw_params.calib_rt_cfg)
iwlagn_send_calib_cfg_rt(priv, priv->hw_params.calib_rt_cfg);
set_bit(STATUS_READY, &priv->status);
/* Configure the adapter for unassociated operation */
- iwlcore_commit_rxon(priv, ctx);
+ ret = iwlcore_commit_rxon(priv, ctx);
+ if (ret)
+ return ret;
/* At this point, the NIC is initialized and operational */
iwl_rf_kill_ct_config(priv);
IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
- wake_up_interruptible(&priv->wait_command_queue);
- iwl_power_update_mode(priv, true);
- IWL_DEBUG_INFO(priv, "Updated power mode\n");
-
-
- return;
-
- restart:
- queue_work(priv->workqueue, &priv->restart);
+ return iwl_power_update_mode(priv, true);
}
static void iwl_cancel_deferred_work(struct iwl_priv *priv);
static void __iwl_down(struct iwl_priv *priv)
{
- unsigned long flags;
int exit_pending;
IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
if (!exit_pending)
clear_bit(STATUS_EXIT_PENDING, &priv->status);
- /* stop and reset the on-board processor */
- iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
-
- /* tell the device to stop sending interrupts */
- spin_lock_irqsave(&priv->lock, flags);
- iwl_disable_interrupts(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
- iwl_synchronize_irq(priv);
-
if (priv->mac80211_registered)
ieee80211_stop_queues(priv->hw);
- /* If we have not previously called iwl_init() then
- * clear all bits but the RF Kill bit and return */
- if (!iwl_is_init(priv)) {
- priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
- STATUS_RF_KILL_HW |
- test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
- STATUS_GEO_CONFIGURED |
- test_bit(STATUS_EXIT_PENDING, &priv->status) <<
- STATUS_EXIT_PENDING;
- goto exit;
- }
-
- /* ...otherwise clear out all the status bits but the RF Kill
- * bit and continue taking the NIC down. */
+ /* Clear out all status bits but a few that are stable across reset */
priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
STATUS_RF_KILL_HW |
test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
test_bit(STATUS_EXIT_PENDING, &priv->status) <<
STATUS_EXIT_PENDING;
- /* device going down, Stop using ICT table */
- iwl_disable_ict(priv);
-
- iwlagn_txq_ctx_stop(priv);
- iwlagn_rxq_stop(priv);
+ iwlagn_stop_device(priv);
- /* Power-down device's busmaster DMA clocks */
- iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
- udelay(5);
-
- /* Make sure (redundant) we've released our request to stay awake */
- iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
-
- /* Stop the device, and put it in low power state */
- iwl_apm_stop(priv);
-
- exit:
dev_kfree_skb(priv->beacon_skb);
priv->beacon_skb = NULL;
-
- /* clear out any free frames */
- iwl_clear_free_frames(priv);
}
static void iwl_down(struct iwl_priv *priv)
#define HW_READY_TIMEOUT (50)
+/* Note: returns poll_bit return value, which is >= 0 if success */
static int iwl_set_hw_ready(struct iwl_priv *priv)
{
- int ret = 0;
+ int ret;
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);
CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
HW_READY_TIMEOUT);
- if (ret != -ETIMEDOUT)
- priv->hw_ready = true;
- else
- priv->hw_ready = false;
- IWL_DEBUG_INFO(priv, "hardware %s\n",
- (priv->hw_ready == 1) ? "ready" : "not ready");
+ IWL_DEBUG_INFO(priv, "hardware%s ready\n", ret < 0 ? " not" : "");
return ret;
}
-static int iwl_prepare_card_hw(struct iwl_priv *priv)
+/* Note: returns standard 0/-ERROR code */
+int iwl_prepare_card_hw(struct iwl_priv *priv)
{
- int ret = 0;
+ int ret;
IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter\n");
ret = iwl_set_hw_ready(priv);
- if (priv->hw_ready)
- return ret;
+ if (ret >= 0)
+ return 0;
/* If HW is not ready, prepare the conditions to check again */
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
- /* HW should be ready by now, check again. */
- if (ret != -ETIMEDOUT)
- iwl_set_hw_ready(priv);
+ if (ret < 0)
+ return ret;
+ /* HW should be ready by now, check again. */
+ ret = iwl_set_hw_ready(priv);
+ if (ret >= 0)
+ return 0;
return ret;
}
static int __iwl_up(struct iwl_priv *priv)
{
struct iwl_rxon_context *ctx;
- int i;
int ret;
+ lockdep_assert_held(&priv->mutex);
+
if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
return -EIO;
}
}
- iwl_prepare_card_hw(priv);
-
- if (!priv->hw_ready) {
- IWL_WARN(priv, "Exit HW not ready\n");
- return -EIO;
- }
-
- /* If platform's RF_KILL switch is NOT set to KILL */
- if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
- clear_bit(STATUS_RF_KILL_HW, &priv->status);
- else
- set_bit(STATUS_RF_KILL_HW, &priv->status);
-
- if (iwl_is_rfkill(priv)) {
- wiphy_rfkill_set_hw_state(priv->hw->wiphy, true);
-
- iwl_enable_interrupts(priv);
- IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
- return 0;
+ ret = iwlagn_run_init_ucode(priv);
+ if (ret) {
+ IWL_ERR(priv, "Failed to run INIT ucode: %d\n", ret);
+ goto error;
}
- iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
-
- ret = iwlagn_hw_nic_init(priv);
+ ret = iwlagn_load_ucode_wait_alive(priv,
+ &priv->ucode_rt,
+ UCODE_SUBTYPE_REGULAR,
+ UCODE_SUBTYPE_REGULAR_NEW);
if (ret) {
- IWL_ERR(priv, "Unable to init nic\n");
- return ret;
+ IWL_ERR(priv, "Failed to start RT ucode: %d\n", ret);
+ goto error;
}
- /* make sure rfkill handshake bits are cleared */
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
- CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
- /* clear (again), then enable host interrupts */
- iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
- iwl_enable_interrupts(priv);
-
- /* really make sure rfkill handshake bits are cleared */
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-
- for (i = 0; i < MAX_HW_RESTARTS; i++) {
-
- /* load bootstrap state machine,
- * load bootstrap program into processor's memory,
- * prepare to load the "initialize" uCode */
- ret = iwlagn_load_ucode(priv);
-
- if (ret) {
- IWL_ERR(priv, "Unable to set up bootstrap uCode: %d\n",
- ret);
- continue;
- }
-
- /* start card; "initialize" will load runtime ucode */
- iwl_nic_start(priv);
-
- IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n");
-
- return 0;
- }
+ ret = iwl_alive_start(priv);
+ if (ret)
+ goto error;
+ return 0;
+ error:
set_bit(STATUS_EXIT_PENDING, &priv->status);
__iwl_down(priv);
clear_bit(STATUS_EXIT_PENDING, &priv->status);
- /* tried to restart and config the device for as long as our
- * patience could withstand */
- IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i);
- return -EIO;
+ IWL_ERR(priv, "Unable to initialize device.\n");
+ return ret;
}
*
*****************************************************************************/
-static void iwl_bg_init_alive_start(struct work_struct *data)
-{
- struct iwl_priv *priv =
- container_of(data, struct iwl_priv, init_alive_start.work);
-
- mutex_lock(&priv->mutex);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
- mutex_unlock(&priv->mutex);
- return;
- }
-
- iwlagn_init_alive_start(priv);
- mutex_unlock(&priv->mutex);
-}
-
-static void iwl_bg_alive_start(struct work_struct *data)
-{
- struct iwl_priv *priv =
- container_of(data, struct iwl_priv, alive_start.work);
-
- mutex_lock(&priv->mutex);
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- goto unlock;
-
- /* enable dram interrupt */
- iwl_reset_ict(priv);
-
- iwl_alive_start(priv);
-unlock:
- mutex_unlock(&priv->mutex);
-}
-
static void iwl_bg_run_time_calib_work(struct work_struct *work)
{
struct iwl_priv *priv = container_of(work, struct iwl_priv,
mutex_unlock(&priv->mutex);
}
+static void iwlagn_prepare_restart(struct iwl_priv *priv)
+{
+ struct iwl_rxon_context *ctx;
+ bool bt_full_concurrent;
+ u8 bt_ci_compliance;
+ u8 bt_load;
+ u8 bt_status;
+
+ lockdep_assert_held(&priv->mutex);
+
+ for_each_context(priv, ctx)
+ ctx->vif = NULL;
+ priv->is_open = 0;
+
+ /*
+ * __iwl_down() will clear the BT status variables,
+ * which is correct, but when we restart we really
+ * want to keep them so restore them afterwards.
+ *
+ * The restart process will later pick them up and
+ * re-configure the hw when we reconfigure the BT
+ * command.
+ */
+ bt_full_concurrent = priv->bt_full_concurrent;
+ bt_ci_compliance = priv->bt_ci_compliance;
+ bt_load = priv->bt_traffic_load;
+ bt_status = priv->bt_status;
+
+ __iwl_down(priv);
+
+ priv->bt_full_concurrent = bt_full_concurrent;
+ priv->bt_ci_compliance = bt_ci_compliance;
+ priv->bt_traffic_load = bt_load;
+ priv->bt_status = bt_status;
+}
+
static void iwl_bg_restart(struct work_struct *data)
{
struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
return;
if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
- struct iwl_rxon_context *ctx;
- bool bt_full_concurrent;
- u8 bt_ci_compliance;
- u8 bt_load;
- u8 bt_status;
-
mutex_lock(&priv->mutex);
- for_each_context(priv, ctx)
- ctx->vif = NULL;
- priv->is_open = 0;
-
- /*
- * __iwl_down() will clear the BT status variables,
- * which is correct, but when we restart we really
- * want to keep them so restore them afterwards.
- *
- * The restart process will later pick them up and
- * re-configure the hw when we reconfigure the BT
- * command.
- */
- bt_full_concurrent = priv->bt_full_concurrent;
- bt_ci_compliance = priv->bt_ci_compliance;
- bt_load = priv->bt_traffic_load;
- bt_status = priv->bt_status;
-
- __iwl_down(priv);
-
- priv->bt_full_concurrent = bt_full_concurrent;
- priv->bt_ci_compliance = bt_ci_compliance;
- priv->bt_traffic_load = bt_load;
- priv->bt_status = bt_status;
-
+ iwlagn_prepare_restart(priv);
mutex_unlock(&priv->mutex);
iwl_cancel_deferred_work(priv);
ieee80211_restart_hw(priv->hw);
} else {
- iwl_down(priv);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
- __iwl_up(priv);
- mutex_unlock(&priv->mutex);
+ WARN_ON(1);
}
}
*
*****************************************************************************/
-#define UCODE_READY_TIMEOUT (4 * HZ)
-
/*
* Not a mac80211 entry point function, but it fits in with all the
* other mac80211 functions grouped here.
mutex_lock(&priv->mutex);
ret = __iwl_up(priv);
mutex_unlock(&priv->mutex);
-
if (ret)
return ret;
- if (iwl_is_rfkill(priv))
- goto out;
-
IWL_DEBUG_INFO(priv, "Start UP work done.\n");
- /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
- * mac80211 will not be run successfully. */
- ret = wait_event_interruptible_timeout(priv->wait_command_queue,
- test_bit(STATUS_READY, &priv->status),
- UCODE_READY_TIMEOUT);
- if (!ret) {
- if (!test_bit(STATUS_READY, &priv->status)) {
- IWL_ERR(priv, "START_ALIVE timeout after %dms.\n",
- jiffies_to_msecs(UCODE_READY_TIMEOUT));
- return -ETIMEDOUT;
- }
- }
+ /* Now we should be done, and the READY bit should be set. */
+ if (WARN_ON(!test_bit(STATUS_READY, &priv->status)))
+ ret = -EIO;
iwlagn_led_enable(priv);
-out:
priv->is_open = 1;
IWL_DEBUG_MAC80211(priv, "leave\n");
return 0;
IWL_DEBUG_MAC80211(priv, "enter\n");
- if (priv->cfg->mod_params->sw_crypto) {
+ if (iwlagn_mod_params.sw_crypto) {
IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
return -EOPNOTSUPP;
}
INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush);
INIT_WORK(&priv->bt_full_concurrency, iwl_bg_bt_full_concurrency);
INIT_WORK(&priv->bt_runtime_config, iwl_bg_bt_runtime_config);
- INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start);
- INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start);
INIT_DELAYED_WORK(&priv->_agn.hw_roc_work, iwlagn_bg_roc_done);
iwl_setup_scan_deferred_work(priv);
if (priv->cfg->ops->lib->cancel_deferred_work)
priv->cfg->ops->lib->cancel_deferred_work(priv);
- cancel_delayed_work_sync(&priv->init_alive_start);
- cancel_delayed_work(&priv->alive_start);
cancel_work_sync(&priv->run_time_calib_work);
cancel_work_sync(&priv->beacon_update);
spin_lock_init(&priv->sta_lock);
spin_lock_init(&priv->hcmd_lock);
- INIT_LIST_HEAD(&priv->free_frames);
-
mutex_init(&priv->mutex);
priv->ieee_channels = NULL;
priv->dynamic_frag_thresh = BT_FRAG_THRESHOLD_DEF;
}
- /* Set the tx_power_user_lmt to the lowest power level
- * this value will get overwritten by channel max power avg
- * from eeprom */
- priv->tx_power_user_lmt = IWLAGN_TX_POWER_TARGET_POWER_MIN;
- priv->tx_power_next = IWLAGN_TX_POWER_TARGET_POWER_MIN;
-
ret = iwl_init_channel_map(priv);
if (ret) {
IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
.cancel_remain_on_channel = iwl_mac_cancel_remain_on_channel,
.offchannel_tx = iwl_mac_offchannel_tx,
.offchannel_tx_cancel_wait = iwl_mac_offchannel_tx_cancel_wait,
+ CFG80211_TESTMODE_CMD(iwl_testmode_cmd)
};
static u32 iwl_hw_detect(struct iwl_priv *priv)
{
priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
- if (priv->cfg->mod_params->amsdu_size_8K)
+ if (iwlagn_mod_params.amsdu_size_8K)
priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_8K);
else
priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_4K);
priv->hw_params.max_beacon_itrvl = IWL_MAX_UCODE_BEACON_INTERVAL;
- if (priv->cfg->mod_params->disable_11n)
+ if (iwlagn_mod_params.disable_11n)
priv->cfg->sku &= ~IWL_SKU_N;
/* Device-specific setup */
priv = hw->priv;
/* At this point both hw and priv are allocated. */
+ priv->ucode_type = UCODE_SUBTYPE_NONE_LOADED;
+
/*
* The default context is always valid,
* more may be discovered when firmware
* PCI Tx retries from interfering with C3 CPU state */
pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
- iwl_prepare_card_hw(priv);
- if (!priv->hw_ready) {
+ if (iwl_prepare_card_hw(priv)) {
IWL_WARN(priv, "Failed, HW not ready\n");
goto out_iounmap;
}
iwl_setup_deferred_work(priv);
iwl_setup_rx_handlers(priv);
+ iwl_testmode_init(priv);
/*********************************************
* 8. Enable interrupts and read RFKILL state
if (priv->mac80211_registered) {
ieee80211_unregister_hw(priv->hw);
priv->mac80211_registered = 0;
- } else {
- iwl_down(priv);
}
- /*
- * Make sure device is reset to low power before unloading driver.
- * This may be redundant with iwl_down(), but there are paths to
- * run iwl_down() without calling apm_ops.stop(), and there are
- * paths to avoid running iwl_down() at all before leaving driver.
- * This (inexpensive) call *makes sure* device is reset.
- */
+ /* Reset to low power before unloading driver. */
iwl_apm_stop(priv);
iwl_tt_exit(priv);
{IWL_PCI_DEVICE(0x088F, 0x4266, iwl6035_2bg_cfg)},
{IWL_PCI_DEVICE(0x088E, 0x4466, iwl6035_2bg_cfg)},
-/* 200 Series */
- {IWL_PCI_DEVICE(0x0894, 0x0022, iwl200_bgn_cfg)},
- {IWL_PCI_DEVICE(0x0895, 0x0222, iwl200_bgn_cfg)},
- {IWL_PCI_DEVICE(0x0894, 0x0422, iwl200_bgn_cfg)},
- {IWL_PCI_DEVICE(0x0894, 0x0026, iwl200_bg_cfg)},
- {IWL_PCI_DEVICE(0x0895, 0x0226, iwl200_bg_cfg)},
- {IWL_PCI_DEVICE(0x0894, 0x0426, iwl200_bg_cfg)},
-
-/* 230 Series */
- {IWL_PCI_DEVICE(0x0892, 0x0062, iwl230_bgn_cfg)},
- {IWL_PCI_DEVICE(0x0893, 0x0262, iwl230_bgn_cfg)},
- {IWL_PCI_DEVICE(0x0892, 0x0462, iwl230_bgn_cfg)},
- {IWL_PCI_DEVICE(0x0892, 0x0066, iwl230_bg_cfg)},
- {IWL_PCI_DEVICE(0x0893, 0x0266, iwl230_bg_cfg)},
- {IWL_PCI_DEVICE(0x0892, 0x0466, iwl230_bg_cfg)},
+/* 105 Series */
+ {IWL_PCI_DEVICE(0x0894, 0x0022, iwl105_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0895, 0x0222, iwl105_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0894, 0x0422, iwl105_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0894, 0x0026, iwl105_bg_cfg)},
+ {IWL_PCI_DEVICE(0x0895, 0x0226, iwl105_bg_cfg)},
+ {IWL_PCI_DEVICE(0x0894, 0x0426, iwl105_bg_cfg)},
+
+/* 135 Series */
+ {IWL_PCI_DEVICE(0x0892, 0x0062, iwl135_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0893, 0x0262, iwl135_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0892, 0x0462, iwl135_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0892, 0x0066, iwl135_bg_cfg)},
+ {IWL_PCI_DEVICE(0x0893, 0x0266, iwl135_bg_cfg)},
+ {IWL_PCI_DEVICE(0x0892, 0x0466, iwl135_bg_cfg)},
{0}
};