}
static int iwlagn_load_given_ucode(struct iwl_priv *priv,
- struct fw_desc *inst_image,
- struct fw_desc *data_image)
+ struct fw_img *image)
{
int ret = 0;
- ret = iwlagn_load_section(priv, "INST", inst_image,
+ ret = iwlagn_load_section(priv, "INST", &image->code,
IWLAGN_RTC_INST_LOWER_BOUND);
if (ret)
return ret;
- return iwlagn_load_section(priv, "DATA", data_image,
+ return iwlagn_load_section(priv, "DATA", &image->data,
IWLAGN_RTC_DATA_LOWER_BOUND);
}
-int iwlagn_load_ucode(struct iwl_priv *priv)
-{
- int ret = 0;
-
- /* check whether init ucode should be loaded, or rather runtime ucode */
- if (priv->ucode_init.len && (priv->ucode_type == UCODE_NONE)) {
- IWL_DEBUG_INFO(priv, "Init ucode found. Loading init ucode...\n");
- ret = iwlagn_load_given_ucode(priv,
- &priv->ucode_init, &priv->ucode_init_data);
- if (!ret) {
- IWL_DEBUG_INFO(priv, "Init ucode load complete.\n");
- priv->ucode_type = UCODE_INIT;
- }
- } else {
- IWL_DEBUG_INFO(priv, "Init ucode not found, or already loaded. "
- "Loading runtime ucode...\n");
- ret = iwlagn_load_given_ucode(priv,
- &priv->ucode_code, &priv->ucode_data);
- if (!ret) {
- IWL_DEBUG_INFO(priv, "Runtime ucode load complete.\n");
- priv->ucode_type = UCODE_RT;
- }
- }
-
- return ret;
-}
-
/*
* Calibration
*/
iwl_calib_set(&priv->calib_results[index], pkt->u.raw, len);
}
-void iwlagn_rx_calib_complete(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
+int iwlagn_init_alive_start(struct iwl_priv *priv)
{
- IWL_DEBUG_INFO(priv, "Init. calibration is completed, restarting fw.\n");
- queue_work(priv->workqueue, &priv->restart);
-}
-
-void iwlagn_init_alive_start(struct iwl_priv *priv)
-{
- int ret = 0;
-
- /* initialize uCode was loaded... verify inst image.
- * This is a paranoid check, because we would not have gotten the
- * "initialize" alive if code weren't properly loaded. */
- if (iwl_verify_ucode(priv, &priv->ucode_init)) {
- /* Runtime instruction load was bad;
- * take it all the way back down so we can try again */
- IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n");
- goto restart;
- }
-
- ret = iwlagn_alive_notify(priv);
- if (ret) {
- IWL_WARN(priv,
- "Could not complete ALIVE transition: %d\n", ret);
- goto restart;
- }
+ int ret;
if (priv->cfg->bt_params &&
priv->cfg->bt_params->advanced_bt_coexist) {
* no need to close the envlope since we are going
* to load the runtime uCode later.
*/
- iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
+ ret = iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
+ if (ret)
+ return ret;
}
- iwlagn_send_calib_cfg(priv);
+
+ ret = iwlagn_send_calib_cfg(priv);
+ if (ret)
+ return ret;
/**
* temperature offset calibration is only needed for runtime ucode,
* so prepare the value now.
*/
if (priv->cfg->need_temp_offset_calib)
- iwlagn_set_temperature_offset_calib(priv);
+ return iwlagn_set_temperature_offset_calib(priv);
- return;
-
-restart:
- /* real restart (first load init_ucode) */
- queue_work(priv->workqueue, &priv->restart);
+ return 0;
}
static int iwlagn_send_wimax_coex(struct iwl_priv *priv)
IWL_ERR(priv, "failed to send BT prio tbl command\n");
}
-void iwlagn_send_bt_env(struct iwl_priv *priv, u8 action, u8 type)
+int iwlagn_send_bt_env(struct iwl_priv *priv, u8 action, u8 type)
{
struct iwl_bt_coex_prot_env_cmd env_cmd;
+ int ret;
env_cmd.action = action;
env_cmd.type = type;
- if (iwl_send_cmd_pdu(priv, REPLY_BT_COEX_PROT_ENV,
- sizeof(env_cmd), &env_cmd))
+ ret = iwl_send_cmd_pdu(priv, REPLY_BT_COEX_PROT_ENV,
+ sizeof(env_cmd), &env_cmd);
+ if (ret)
IWL_ERR(priv, "failed to send BT env command\n");
+ return ret;
}
-int iwlagn_alive_notify(struct iwl_priv *priv)
+static int iwlagn_alive_notify(struct iwl_priv *priv)
{
const struct queue_to_fifo_ac *queue_to_fifo;
+ struct iwl_rxon_context *ctx;
u32 a;
unsigned long flags;
int i, chan;
memset(&priv->queue_stopped[0], 0, sizeof(priv->queue_stopped));
for (i = 0; i < 4; i++)
atomic_set(&priv->queue_stop_count[i], 0);
+ for_each_context(priv, ctx)
+ ctx->last_tx_rejected = false;
/* reset to 0 to enable all the queue first */
priv->txq_ctx_active_msk = 0;
* if IWL_DL_IO is set */
iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
i + IWLAGN_RTC_INST_LOWER_BOUND);
- val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+ val = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
if (val != le32_to_cpu(*image))
return -EIO;
}
offs < len && errors < 20;
offs += sizeof(u32), image++) {
/* read data comes through single port, auto-incr addr */
- /* NOTE: Use the debugless read so we don't flood kernel log
- * if IWL_DL_IO is set */
- val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+ val = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
if (val != le32_to_cpu(*image)) {
IWL_ERR(priv, "uCode INST section at "
"offset 0x%x, is 0x%x, s/b 0x%x\n",
* iwl_verify_ucode - determine which instruction image is in SRAM,
* and verify its contents
*/
-int iwl_verify_ucode(struct iwl_priv *priv, struct fw_desc *fw_desc)
+static int iwl_verify_ucode(struct iwl_priv *priv, struct fw_img *img)
{
- if (!iwlcore_verify_inst_sparse(priv, fw_desc)) {
+ if (!iwlcore_verify_inst_sparse(priv, &img->code)) {
IWL_DEBUG_INFO(priv, "uCode is good in inst SRAM\n");
return 0;
}
IWL_ERR(priv, "UCODE IMAGE IN INSTRUCTION SRAM NOT VALID!!\n");
- iwl_print_mismatch_inst(priv, fw_desc);
+ iwl_print_mismatch_inst(priv, &img->code);
return -EIO;
}
+
+struct iwlagn_alive_data {
+ bool valid;
+ u8 subtype;
+};
+
+static void iwlagn_alive_fn(struct iwl_priv *priv,
+ struct iwl_rx_packet *pkt,
+ void *data)
+{
+ struct iwlagn_alive_data *alive_data = data;
+ struct iwl_alive_resp *palive;
+
+ palive = &pkt->u.alive_frame;
+
+ IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision "
+ "0x%01X 0x%01X\n",
+ palive->is_valid, palive->ver_type,
+ palive->ver_subtype);
+
+ priv->device_pointers.error_event_table =
+ le32_to_cpu(palive->error_event_table_ptr);
+ priv->device_pointers.log_event_table =
+ le32_to_cpu(palive->log_event_table_ptr);
+
+ alive_data->subtype = palive->ver_subtype;
+ alive_data->valid = palive->is_valid == UCODE_VALID_OK;
+}
+
+#define UCODE_ALIVE_TIMEOUT HZ
+#define UCODE_CALIB_TIMEOUT (2*HZ)
+
+int iwlagn_load_ucode_wait_alive(struct iwl_priv *priv,
+ struct fw_img *image,
+ int subtype, int alternate_subtype)
+{
+ struct iwl_notification_wait alive_wait;
+ struct iwlagn_alive_data alive_data;
+ int ret;
+ enum iwlagn_ucode_subtype old_type;
+
+ ret = iwlagn_start_device(priv);
+ if (ret)
+ return ret;
+
+ iwlagn_init_notification_wait(priv, &alive_wait, REPLY_ALIVE,
+ iwlagn_alive_fn, &alive_data);
+
+ old_type = priv->ucode_type;
+ priv->ucode_type = subtype;
+
+ ret = iwlagn_load_given_ucode(priv, image);
+ if (ret) {
+ priv->ucode_type = old_type;
+ iwlagn_remove_notification(priv, &alive_wait);
+ return ret;
+ }
+
+ /* Remove all resets to allow NIC to operate */
+ iwl_write32(priv, CSR_RESET, 0);
+
+ /*
+ * Some things may run in the background now, but we
+ * just wait for the ALIVE notification here.
+ */
+ ret = iwlagn_wait_notification(priv, &alive_wait, UCODE_ALIVE_TIMEOUT);
+ if (ret) {
+ priv->ucode_type = old_type;
+ return ret;
+ }
+
+ if (!alive_data.valid) {
+ IWL_ERR(priv, "Loaded ucode is not valid!\n");
+ priv->ucode_type = old_type;
+ return -EIO;
+ }
+
+ if (alive_data.subtype != subtype &&
+ alive_data.subtype != alternate_subtype) {
+ IWL_ERR(priv,
+ "Loaded ucode is not expected type (got %d, expected %d)!\n",
+ alive_data.subtype, subtype);
+ priv->ucode_type = old_type;
+ return -EIO;
+ }
+
+ ret = iwl_verify_ucode(priv, image);
+ if (ret) {
+ priv->ucode_type = old_type;
+ return ret;
+ }
+
+ /* delay a bit to give rfkill time to run */
+ msleep(5);
+
+ ret = iwlagn_alive_notify(priv);
+ if (ret) {
+ IWL_WARN(priv,
+ "Could not complete ALIVE transition: %d\n", ret);
+ priv->ucode_type = old_type;
+ return ret;
+ }
+
+ return 0;
+}
+
+int iwlagn_run_init_ucode(struct iwl_priv *priv)
+{
+ struct iwl_notification_wait calib_wait;
+ int ret;
+
+ lockdep_assert_held(&priv->mutex);
+
+ /* No init ucode required? Curious, but maybe ok */
+ if (!priv->ucode_init.code.len)
+ return 0;
+
+ if (priv->ucode_type != UCODE_SUBTYPE_NONE_LOADED)
+ return 0;
+
+ iwlagn_init_notification_wait(priv, &calib_wait,
+ CALIBRATION_COMPLETE_NOTIFICATION,
+ NULL, NULL);
+
+ /* Will also start the device */
+ ret = iwlagn_load_ucode_wait_alive(priv, &priv->ucode_init,
+ UCODE_SUBTYPE_INIT, -1);
+ if (ret)
+ goto error;
+
+ ret = iwlagn_init_alive_start(priv);
+ if (ret)
+ goto error;
+
+ /*
+ * Some things may run in the background now, but we
+ * just wait for the calibration complete notification.
+ */
+ ret = iwlagn_wait_notification(priv, &calib_wait, UCODE_CALIB_TIMEOUT);
+
+ goto out;
+
+ error:
+ iwlagn_remove_notification(priv, &calib_wait);
+ out:
+ /* Whatever happened, stop the device */
+ iwlagn_stop_device(priv);
+ return ret;
+}
git.openpandora.org / pandora-kernel.git / blobdiff