priv->rx_handlers[CALIBRATION_COMPLETE_NOTIFICATION] =
iwlagn_rx_calib_complete;
priv->rx_handlers[REPLY_TX] = iwlagn_rx_reply_tx;
+
+ /* set up notification wait support */
+ spin_lock_init(&priv->_agn.notif_wait_lock);
+ INIT_LIST_HEAD(&priv->_agn.notif_waits);
+ init_waitqueue_head(&priv->_agn.notif_waitq);
}
void iwlagn_setup_deferred_work(struct iwl_priv *priv)
/* rx_status carries information about the packet to mac80211 */
rx_status.mactime = le64_to_cpu(phy_res->timestamp);
- rx_status.freq =
- ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel));
rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
+ rx_status.freq =
+ ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel),
+ rx_status.band);
rx_status.rate_idx =
iwlagn_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band);
rx_status.flag = 0;
if (iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, sizeof(bt_cmd), &bt_cmd))
IWL_ERR(priv, "failed to send BT Coex Config\n");
- /*
- * When we are doing a restart, need to also reconfigure BT
- * SCO to the device. If not doing a restart, bt_sco_active
- * will always be false, so there's no need to have an extra
- * variable to check for it.
- */
- if (priv->bt_sco_active) {
- struct iwlagn_bt_sco_cmd sco_cmd = { .flags = 0 };
-
- if (priv->bt_sco_active)
- sco_cmd.flags |= IWLAGN_BT_SCO_ACTIVE;
- if (iwl_send_cmd_pdu(priv, REPLY_BT_COEX_SCO,
- sizeof(sco_cmd), &sco_cmd))
- IWL_ERR(priv, "failed to send BT SCO command\n");
- }
}
static void iwlagn_bt_traffic_change_work(struct work_struct *work)
unsigned long flags;
struct iwl_rx_packet *pkt = rxb_addr(rxb);
struct iwl_bt_coex_profile_notif *coex = &pkt->u.bt_coex_profile_notif;
- struct iwlagn_bt_sco_cmd sco_cmd = { .flags = 0 };
struct iwl_bt_uart_msg *uart_msg = &coex->last_bt_uart_msg;
IWL_DEBUG_NOTIF(priv, "BT Coex notification:\n");
queue_work(priv->workqueue,
&priv->bt_traffic_change_work);
}
- if (priv->bt_sco_active !=
- (uart_msg->frame3 & BT_UART_MSG_FRAME3SCOESCO_MSK)) {
- priv->bt_sco_active = uart_msg->frame3 &
- BT_UART_MSG_FRAME3SCOESCO_MSK;
- if (priv->bt_sco_active)
- sco_cmd.flags |= IWLAGN_BT_SCO_ACTIVE;
- iwl_send_cmd_pdu_async(priv, REPLY_BT_COEX_SCO,
- sizeof(sco_cmd), &sco_cmd, NULL);
- }
}
iwlagn_set_kill_msk(priv, uart_msg);
}
return 0;
}
+
+/* notification wait support */
+void iwlagn_init_notification_wait(struct iwl_priv *priv,
+ struct iwl_notification_wait *wait_entry,
+ void (*fn)(struct iwl_priv *priv,
+ struct iwl_rx_packet *pkt),
+ u8 cmd)
+{
+ wait_entry->fn = fn;
+ wait_entry->cmd = cmd;
+ wait_entry->triggered = false;
+
+ spin_lock_bh(&priv->_agn.notif_wait_lock);
+ list_add(&wait_entry->list, &priv->_agn.notif_waits);
+ spin_unlock_bh(&priv->_agn.notif_wait_lock);
+}
+
+signed long iwlagn_wait_notification(struct iwl_priv *priv,
+ struct iwl_notification_wait *wait_entry,
+ unsigned long timeout)
+{
+ int ret;
+
+ ret = wait_event_timeout(priv->_agn.notif_waitq,
+ &wait_entry->triggered,
+ timeout);
+
+ spin_lock_bh(&priv->_agn.notif_wait_lock);
+ list_del(&wait_entry->list);
+ spin_unlock_bh(&priv->_agn.notif_wait_lock);
+
+ return ret;
+}
+
+void iwlagn_remove_notification(struct iwl_priv *priv,
+ struct iwl_notification_wait *wait_entry)
+{
+ spin_lock_bh(&priv->_agn.notif_wait_lock);
+ list_del(&wait_entry->list);
+ spin_unlock_bh(&priv->_agn.notif_wait_lock);
+}