-config IWLWIFI
- tristate "Intel Wireless Wifi"
+config IWLAGN
+ tristate "Intel Wireless WiFi Next Gen AGN - Wireless-N/Advanced-N/Ultimate-N (iwlagn) "
depends on PCI && MAC80211
select FW_LOADER
+ select NEW_LEDS
+ select LEDS_CLASS
+ select LEDS_TRIGGERS
+ select MAC80211_LEDS
+ ---help---
+ Select to build the driver supporting the:
+
+ Intel Wireless WiFi Link Next-Gen AGN
+
+ This option enables support for use with the following hardware:
+ Intel Wireless WiFi Link 6250AGN Adapter
+ Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN)
+ Intel WiFi Link 1000BGN
+ Intel Wireless WiFi 5150AGN
+ Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN
+ Intel 6005 Series Wi-Fi Adapters
+ Intel 6030 Series Wi-Fi Adapters
+ Intel Wireless WiFi Link 6150BGN 2 Adapter
+ Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN)
+ Intel 2000 Series Wi-Fi Adapters
+
+
+ This driver uses the kernel's mac80211 subsystem.
+
+ In order to use this driver, you will need a microcode (uCode)
+ image for it. You can obtain the microcode from:
+
+ <http://intellinuxwireless.org/>.
+
+ The microcode is typically installed in /lib/firmware. You can
+ look in the hotplug script /etc/hotplug/firmware.agent to
+ determine which directory FIRMWARE_DIR is set to when the script
+ runs.
+
+ If you want to compile the driver as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here and read <file:Documentation/kbuild/modules.txt>. The
+ module will be called iwlagn.
menu "Debugging Options"
- depends on IWLWIFI
+ depends on IWLAGN
config IWLWIFI_DEBUG
- bool "Enable full debugging output in iwlagn and iwl3945 drivers"
- depends on IWLWIFI
+ bool "Enable full debugging output in the iwlagn driver"
+ depends on IWLAGN
---help---
This option will enable debug tracing output for the iwlwifi drivers
config IWLWIFI_DEBUGFS
bool "iwlagn debugfs support"
- depends on IWLWIFI && MAC80211_DEBUGFS
+ depends on IWLAGN && MAC80211_DEBUGFS
---help---
Enable creation of debugfs files for the iwlwifi drivers. This
is a low-impact option that allows getting insight into the
config IWLWIFI_DEBUG_EXPERIMENTAL_UCODE
bool "Experimental uCode support"
- depends on IWLWIFI && IWLWIFI_DEBUG
+ depends on IWLAGN && IWLWIFI_DEBUG
---help---
Enable use of experimental ucode for testing and debugging.
config IWLWIFI_DEVICE_TRACING
bool "iwlwifi device access tracing"
- depends on IWLWIFI
+ depends on IWLAGN
depends on EVENT_TRACING
help
Say Y here to trace all commands, including TX frames and IO
occur.
endmenu
-config IWLAGN
- tristate "Intel Wireless WiFi Next Gen AGN (iwlagn)"
- depends on IWLWIFI
- ---help---
- Select to build the driver supporting the:
-
- Intel Wireless WiFi Link Next-Gen AGN
-
- This driver uses the kernel's mac80211 subsystem.
-
- In order to use this driver, you will need a microcode (uCode)
- image for it. You can obtain the microcode from:
-
- <http://intellinuxwireless.org/>.
-
- The microcode is typically installed in /lib/firmware. You can
- look in the hotplug script /etc/hotplug/firmware.agent to
- determine which directory FIRMWARE_DIR is set to when the script
- runs.
-
- If you want to compile the driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/kbuild/modules.txt>. The
- module will be called iwlagn.
-
-
-config IWL4965
- bool "Intel Wireless WiFi 4965AGN"
- depends on IWLAGN
- ---help---
- This option enables support for Intel Wireless WiFi Link 4965AGN
-
-config IWL5000
- bool "Intel Wireless-N/Advanced-N/Ultimate-N WiFi Link"
+config IWL_P2P
+ bool "iwlwifi experimental P2P support"
depends on IWLAGN
- ---help---
- This option enables support for use with the following hardware:
- Intel Wireless WiFi Link 6250AGN Adapter
- Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN)
- Intel WiFi Link 1000BGN
- Intel Wireless WiFi 5150AGN
- Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN
- Intel 6000 Gen 2 Series Wi-Fi Adapters (6000G2A and 6000G2B)
- Intel WIreless WiFi Link 6050BGN Gen 2 Adapter
- Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN)
-
-config IWL3945
- tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)"
- depends on IWLWIFI
- ---help---
- Select to build the driver supporting the:
-
- Intel PRO/Wireless 3945ABG/BG Network Connection
-
- This driver uses the kernel's mac80211 subsystem.
-
- In order to use this driver, you will need a microcode (uCode)
- image for it. You can obtain the microcode from:
+ help
+ This option enables experimental P2P support for some devices
+ based on microcode support. Since P2P support is still under
+ development, this option may even enable it for some devices
+ now that turn out to not support it in the future due to
+ microcode restrictions.
- <http://intellinuxwireless.org/>.
+ To determine if your microcode supports the experimental P2P
+ offered by this option, check if the driver advertises AP
+ support when it is loaded.
- The microcode is typically installed in /lib/firmware. You can
- look in the hotplug script /etc/hotplug/firmware.agent to
- determine which directory FIRMWARE_DIR is set to when the script
- runs.
+ Say Y only if you want to experiment with P2P.
- If you want to compile the driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/kbuild/modules.txt>. The
- module will be called iwl3945.
git.openpandora.org / pandora-kernel.git / blobdiff