Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

[pandora-kernel.git] / drivers / net / wireless / b43 / phy_g.c

diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index 1758a28..83532d1 100644 (file)
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -718,7 +718,7 @@ static void b43_calc_nrssi_threshold(struct b43_wldev *dev)
        B43_WARN_ON(phy->type != B43_PHYTYPE_G);
 
        if (!phy->gmode ||
-           !(dev->sdev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) {
+           !(dev->dev->bus_sprom->boardflags_lo & B43_BFL_RSSI)) {
                tmp16 = b43_nrssi_hw_read(dev, 0x20);
                if (tmp16 >= 0x20)
                        tmp16 -= 0x40;
@@ -1114,7 +1114,7 @@ static u16 radio2050_rfover_val(struct b43_wldev *dev,
 {
        struct b43_phy *phy = &dev->phy;
        struct b43_phy_g *gphy = phy->g;
-       struct ssb_sprom *sprom = &(dev->sdev->bus->sprom);
+       struct ssb_sprom *sprom = dev->dev->bus_sprom;
 
        if (!phy->gmode)
                return 0;
@@ -1491,7 +1491,6 @@ static u16 b43_radio_init2050(struct b43_wldev *dev)
 
 static void b43_phy_initb5(struct b43_wldev *dev)
 {
-       struct ssb_bus *bus = dev->sdev->bus;
        struct b43_phy *phy = &dev->phy;
        struct b43_phy_g *gphy = phy->g;
        u16 offset, value;
@@ -1500,8 +1499,8 @@ static void b43_phy_initb5(struct b43_wldev *dev)
        if (phy->analog == 1) {
                b43_radio_set(dev, 0x007A, 0x0050);
        }
-       if ((bus->boardinfo.vendor != SSB_BOARDVENDOR_BCM) &&
-           (bus->boardinfo.type != SSB_BOARD_BU4306)) {
+       if ((dev->dev->board_vendor != SSB_BOARDVENDOR_BCM) &&
+           (dev->dev->board_type != SSB_BOARD_BU4306)) {
                value = 0x2120;
                for (offset = 0x00A8; offset < 0x00C7; offset++) {
                        b43_phy_write(dev, offset, value);
@@ -1620,7 +1619,7 @@ static void b43_phy_initb6(struct b43_wldev *dev)
                b43_radio_write16(dev, 0x5A, 0x88);
                b43_radio_write16(dev, 0x5B, 0x6B);
                b43_radio_write16(dev, 0x5C, 0x0F);
-               if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_ALTIQ) {
+               if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_ALTIQ) {
                        b43_radio_write16(dev, 0x5D, 0xFA);
                        b43_radio_write16(dev, 0x5E, 0xD8);
                } else {
@@ -1787,7 +1786,7 @@ static void b43_calc_loopback_gain(struct b43_wldev *dev)
        b43_phy_set(dev, B43_PHY_RFOVER, 0x0100);
        b43_phy_mask(dev, B43_PHY_RFOVERVAL, 0xCFFF);
 
-       if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA) {
+       if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_EXTLNA) {
                if (phy->rev >= 7) {
                        b43_phy_set(dev, B43_PHY_RFOVER, 0x0800);
                        b43_phy_set(dev, B43_PHY_RFOVERVAL, 0x8000);
@@ -1922,7 +1921,6 @@ static void b43_hardware_pctl_init_gphy(struct b43_wldev *dev)
 /* Initialize B/G PHY power control */
 static void b43_phy_init_pctl(struct b43_wldev *dev)
 {
-       struct ssb_bus *bus = dev->sdev->bus;
        struct b43_phy *phy = &dev->phy;
        struct b43_phy_g *gphy = phy->g;
        struct b43_rfatt old_rfatt;
@@ -1931,8 +1929,8 @@ static void b43_phy_init_pctl(struct b43_wldev *dev)
 
        B43_WARN_ON(phy->type != B43_PHYTYPE_G);
 
-       if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) &&
-           (bus->boardinfo.type == SSB_BOARD_BU4306))
+       if ((dev->dev->board_vendor == SSB_BOARDVENDOR_BCM) &&
+           (dev->dev->board_type == SSB_BOARD_BU4306))
                return;
 
        b43_phy_write(dev, 0x0028, 0x8018);
@@ -2053,7 +2051,7 @@ static void b43_phy_initg(struct b43_wldev *dev)
        if (phy->rev >= 6) {
                b43_phy_maskset(dev, B43_PHY_CCK(0x36), 0x0FFF, (gphy->lo_control->tx_bias << 12));
        }
-       if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)
+       if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL)
                b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8075);
        else
                b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x807F);
@@ -2066,7 +2064,7 @@ static void b43_phy_initg(struct b43_wldev *dev)
                b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078);
        }
 
-       if (!(dev->sdev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) {
+       if (!(dev->dev->bus_sprom->boardflags_lo & B43_BFL_RSSI)) {
                /* The specs state to update the NRSSI LT with
                 * the value 0x7FFFFFFF here. I think that is some weird
                 * compiler optimization in the original driver.
@@ -2088,8 +2086,8 @@ static void b43_phy_initg(struct b43_wldev *dev)
        /* FIXME: The spec says in the following if, the 0 should be replaced
           'if OFDM may not be used in the current locale'
           but OFDM is legal everywhere */
-       if ((dev->sdev->bus->chip_id == 0x4306
-            && dev->sdev->bus->chip_package == 2) || 0) {
+       if ((dev->dev->chip_id == 0x4306
+            && dev->dev->chip_pkg == 2) || 0) {
                b43_phy_mask(dev, B43_PHY_CRS0, 0xBFFF);
                b43_phy_mask(dev, B43_PHY_OFDM(0xC3), 0x7FFF);
        }
@@ -2105,7 +2103,7 @@ void b43_gphy_channel_switch(struct b43_wldev *dev,
        b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel));
 
        if (channel == 14) {
-               if (dev->sdev->bus->sprom.country_code ==
+               if (dev->dev->bus_sprom->country_code ==
                    SSB_SPROM1CCODE_JAPAN)
                        b43_hf_write(dev,
                                     b43_hf_read(dev) & ~B43_HF_ACPR);
@@ -2136,17 +2134,17 @@ static void default_baseband_attenuation(struct b43_wldev *dev,
 static void default_radio_attenuation(struct b43_wldev *dev,
                                      struct b43_rfatt *rf)
 {
-       struct ssb_bus *bus = dev->sdev->bus;
+       struct b43_bus_dev *bdev = dev->dev;
        struct b43_phy *phy = &dev->phy;
 
        rf->with_padmix = 0;
 
-       if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM &&
-           bus->boardinfo.type == SSB_BOARD_BCM4309G) {
-               if (bus->boardinfo.rev < 0x43) {
+       if (dev->dev->board_vendor == SSB_BOARDVENDOR_BCM &&
+           dev->dev->board_type == SSB_BOARD_BCM4309G) {
+               if (dev->dev->board_rev < 0x43) {
                        rf->att = 2;
                        return;
-               } else if (bus->boardinfo.rev < 0x51) {
+               } else if (dev->dev->board_rev < 0x51) {
                        rf->att = 3;
                        return;
                }
@@ -2172,21 +2170,21 @@ static void default_radio_attenuation(struct b43_wldev *dev,
                        return;
                case 1:
                        if (phy->type == B43_PHYTYPE_G) {
-                               if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM
-                                   && bus->boardinfo.type == SSB_BOARD_BCM4309G
-                                   && bus->boardinfo.rev >= 30)
+                               if (bdev->board_vendor == SSB_BOARDVENDOR_BCM
+                                   && bdev->board_type == SSB_BOARD_BCM4309G
+                                   && bdev->board_rev >= 30)
                                        rf->att = 3;
-                               else if (bus->boardinfo.vendor ==
+                               else if (bdev->board_vendor ==
                                         SSB_BOARDVENDOR_BCM
-                                        && bus->boardinfo.type ==
+                                        && bdev->board_type ==
                                         SSB_BOARD_BU4306)
                                        rf->att = 3;
                                else
                                        rf->att = 1;
                        } else {
-                               if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM
-                                   && bus->boardinfo.type == SSB_BOARD_BCM4309G
-                                   && bus->boardinfo.rev >= 30)
+                               if (bdev->board_vendor == SSB_BOARDVENDOR_BCM
+                                   && bdev->board_type == SSB_BOARD_BCM4309G
+                                   && bdev->board_rev >= 30)
                                        rf->att = 7;
                                else
                                        rf->att = 6;
@@ -2194,16 +2192,16 @@ static void default_radio_attenuation(struct b43_wldev *dev,
                        return;
                case 2:
                        if (phy->type == B43_PHYTYPE_G) {
-                               if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM
-                                   && bus->boardinfo.type == SSB_BOARD_BCM4309G
-                                   && bus->boardinfo.rev >= 30)
+                               if (bdev->board_vendor == SSB_BOARDVENDOR_BCM
+                                   && bdev->board_type == SSB_BOARD_BCM4309G
+                                   && bdev->board_rev >= 30)
                                        rf->att = 3;
-                               else if (bus->boardinfo.vendor ==
+                               else if (bdev->board_vendor ==
                                         SSB_BOARDVENDOR_BCM
-                                        && bus->boardinfo.type ==
+                                        && bdev->board_type ==
                                         SSB_BOARD_BU4306)
                                        rf->att = 5;
-                               else if (bus->chip_id == 0x4320)
+                               else if (bdev->chip_id == 0x4320)
                                        rf->att = 4;
                                else
                                        rf->att = 3;
@@ -2384,11 +2382,11 @@ static int b43_gphy_init_tssi2dbm_table(struct b43_wldev *dev)
        struct b43_phy_g *gphy = phy->g;
        s16 pab0, pab1, pab2;
 
-       pab0 = (s16) (dev->sdev->bus->sprom.pa0b0);
-       pab1 = (s16) (dev->sdev->bus->sprom.pa0b1);
-       pab2 = (s16) (dev->sdev->bus->sprom.pa0b2);
+       pab0 = (s16) (dev->dev->bus_sprom->pa0b0);
+       pab1 = (s16) (dev->dev->bus_sprom->pa0b1);
+       pab2 = (s16) (dev->dev->bus_sprom->pa0b2);
 
-       B43_WARN_ON((dev->sdev->bus->chip_id == 0x4301) &&
+       B43_WARN_ON((dev->dev->chip_id == 0x4301) &&
                    (phy->radio_ver != 0x2050)); /* Not supported anymore */
 
        gphy->dyn_tssi_tbl = 0;
@@ -2396,10 +2394,10 @@ static int b43_gphy_init_tssi2dbm_table(struct b43_wldev *dev)
        if (pab0 != 0 && pab1 != 0 && pab2 != 0 &&
            pab0 != -1 && pab1 != -1 && pab2 != -1) {
                /* The pabX values are set in SPROM. Use them. */
-               if ((s8) dev->sdev->bus->sprom.itssi_bg != 0 &&
-                   (s8) dev->sdev->bus->sprom.itssi_bg != -1) {
+               if ((s8) dev->dev->bus_sprom->itssi_bg != 0 &&
+                   (s8) dev->dev->bus_sprom->itssi_bg != -1) {
                        gphy->tgt_idle_tssi =
-                               (s8) (dev->sdev->bus->sprom.itssi_bg);
+                               (s8) (dev->dev->bus_sprom->itssi_bg);
                } else
                        gphy->tgt_idle_tssi = 62;
                gphy->tssi2dbm = b43_generate_dyn_tssi2dbm_tab(dev, pab0,
@@ -2537,7 +2535,7 @@ static int b43_gphy_op_prepare_hardware(struct b43_wldev *dev)
                b43_wireless_core_reset(dev, 0);
                b43_phy_initg(dev);
                phy->gmode = 1;
-               b43_wireless_core_reset(dev, B43_TMSLOW_GMODE);
+               b43_wireless_core_reset(dev, 1);
        }
 
        return 0;
@@ -2840,7 +2838,7 @@ static void b43_gphy_op_adjust_txpower(struct b43_wldev *dev)
                                    B43_TXCTL_TXMIX;
                                rfatt += 2;
                                bbatt += 2;
-                       } else if (dev->sdev->bus->sprom.
+                       } else if (dev->dev->bus_sprom->
                                   boardflags_lo &
                                   B43_BFL_PACTRL) {
                                bbatt += 4 * (rfatt - 2);
@@ -2914,14 +2912,14 @@ static enum b43_txpwr_result b43_gphy_op_recalc_txpower(struct b43_wldev *dev,
        estimated_pwr = b43_gphy_estimate_power_out(dev, average_tssi);
 
        B43_WARN_ON(phy->type != B43_PHYTYPE_G);
-       max_pwr = dev->sdev->bus->sprom.maxpwr_bg;
-       if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)
+       max_pwr = dev->dev->bus_sprom->maxpwr_bg;
+       if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL)
                max_pwr -= 3; /* minus 0.75 */
        if (unlikely(max_pwr >= INT_TO_Q52(30/*dBm*/))) {
                b43warn(dev->wl,
                        "Invalid max-TX-power value in SPROM.\n");
                max_pwr = INT_TO_Q52(20); /* fake it */
-               dev->sdev->bus->sprom.maxpwr_bg = max_pwr;
+               dev->dev->bus_sprom->maxpwr_bg = max_pwr;
        }
 
        /* Get desired power (in Q5.2) */
@@ -3014,7 +3012,7 @@ static void b43_gphy_op_pwork_60sec(struct b43_wldev *dev)
 {
        struct b43_phy *phy = &dev->phy;
 
-       if (!(dev->sdev->bus->sprom.boardflags_lo & B43_BFL_RSSI))
+       if (!(dev->dev->bus_sprom->boardflags_lo & B43_BFL_RSSI))
                return;
 
        b43_mac_suspend(dev);