}
}
+#ifdef CONFIG_B43_BCMA
+static void b43_bcma_wireless_core_reset(struct b43_wldev *dev, bool gmode)
+{
+ u32 flags = 0;
+
+ if (gmode)
+ flags = B43_BCMA_IOCTL_GMODE;
+ flags |= B43_BCMA_IOCTL_PHY_CLKEN;
+ flags |= B43_BCMA_IOCTL_PHY_BW_20MHZ; /* Make 20 MHz def */
+ b43_device_enable(dev, flags);
+
+ /* TODO: reset PHY */
+}
+#endif
+
static void b43_ssb_wireless_core_reset(struct b43_wldev *dev, bool gmode)
{
struct ssb_device *sdev = dev->dev->sdev;
{
u32 macctl;
- b43_ssb_wireless_core_reset(dev, gmode);
+ switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+ case B43_BUS_BCMA:
+ b43_bcma_wireless_core_reset(dev, gmode);
+ break;
+#endif
+#ifdef CONFIG_B43_SSB
+ case B43_BUS_SSB:
+ b43_ssb_wireless_core_reset(dev, gmode);
+ break;
+#endif
+ }
/* Turn Analog ON, but only if we already know the PHY-type.
* This protects against very early setup where we don't know the
return IRQ_NONE;
reason &= dev->irq_mask;
if (!reason)
- return IRQ_HANDLED;
+ return IRQ_NONE;
dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON)
& 0x0001DC00;
u32 tmshigh;
int err;
+ /* Files for HT and LCN were found by trying one by one */
+
/* Get microcode */
- if ((rev >= 5) && (rev <= 10))
+ if ((rev >= 5) && (rev <= 10)) {
filename = "ucode5";
- else if ((rev >= 11) && (rev <= 12))
+ } else if ((rev >= 11) && (rev <= 12)) {
filename = "ucode11";
- else if (rev == 13)
+ } else if (rev == 13) {
filename = "ucode13";
- else if (rev == 14)
+ } else if (rev == 14) {
filename = "ucode14";
- else if (rev == 15)
+ } else if (rev == 15) {
filename = "ucode15";
- else if ((rev >= 16) && (rev <= 20))
- filename = "ucode16_mimo";
- else
- goto err_no_ucode;
+ } else {
+ switch (dev->phy.type) {
+ case B43_PHYTYPE_N:
+ if (rev >= 16)
+ filename = "ucode16_mimo";
+ else
+ goto err_no_ucode;
+ break;
+ case B43_PHYTYPE_HT:
+ if (rev == 29)
+ filename = "ucode29_mimo";
+ else
+ goto err_no_ucode;
+ break;
+ case B43_PHYTYPE_LCN:
+ if (rev == 24)
+ filename = "ucode24_mimo";
+ else
+ goto err_no_ucode;
+ break;
+ default:
+ goto err_no_ucode;
+ }
+ }
err = b43_do_request_fw(ctx, filename, &fw->ucode);
if (err)
goto err_load;
else
goto err_no_initvals;
break;
+ case B43_PHYTYPE_HT:
+ if (rev == 29)
+ filename = "ht0initvals29";
+ else
+ goto err_no_initvals;
+ break;
+ case B43_PHYTYPE_LCN:
+ if (rev == 24)
+ filename = "lcn0initvals24";
+ else
+ goto err_no_initvals;
+ break;
default:
goto err_no_initvals;
}
else
goto err_no_initvals;
break;
+ case B43_PHYTYPE_HT:
+ if (rev == 29)
+ filename = "ht0bsinitvals29";
+ else
+ goto err_no_initvals;
+ break;
+ case B43_PHYTYPE_LCN:
+ if (rev == 24)
+ filename = "lcn0bsinitvals24";
+ else
+ goto err_no_initvals;
+ break;
default:
goto err_no_initvals;
}
if (dev->dev->core_rev >= 2)
mask |= 0x0010; /* FIXME: This is redundant. */
- gpiodev = b43_ssb_gpio_dev(dev);
- if (gpiodev)
- ssb_write32(gpiodev, B43_GPIO_CONTROL,
- (ssb_read32(gpiodev, B43_GPIO_CONTROL)
- & mask) | set);
+ switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+ case B43_BUS_BCMA:
+ bcma_cc_write32(&dev->dev->bdev->bus->drv_cc, BCMA_CC_GPIOCTL,
+ (bcma_cc_read32(&dev->dev->bdev->bus->drv_cc,
+ BCMA_CC_GPIOCTL) & mask) | set);
+ break;
+#endif
+#ifdef CONFIG_B43_SSB
+ case B43_BUS_SSB:
+ gpiodev = b43_ssb_gpio_dev(dev);
+ if (gpiodev)
+ ssb_write32(gpiodev, B43_GPIO_CONTROL,
+ (ssb_read32(gpiodev, B43_GPIO_CONTROL)
+ & mask) | set);
+ break;
+#endif
+ }
return 0;
}
{
struct ssb_device *gpiodev;
- gpiodev = b43_ssb_gpio_dev(dev);
- if (gpiodev)
- ssb_write32(gpiodev, B43_GPIO_CONTROL, 0);
+ switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+ case B43_BUS_BCMA:
+ bcma_cc_write32(&dev->dev->bdev->bus->drv_cc, BCMA_CC_GPIOCTL,
+ 0);
+ break;
+#endif
+#ifdef CONFIG_B43_SSB
+ case B43_BUS_SSB:
+ gpiodev = b43_ssb_gpio_dev(dev);
+ if (gpiodev)
+ ssb_write32(gpiodev, B43_GPIO_CONTROL, 0);
+ break;
+#endif
+ }
}
/* http://bcm-specs.sipsolutions.net/EnableMac */
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/MacPhyClkSet */
void b43_mac_phy_clock_set(struct b43_wldev *dev, bool on)
{
- u32 tmslow = ssb_read32(dev->sdev, SSB_TMSLOW);
- if (on)
- tmslow |= B43_TMSLOW_MACPHYCLKEN;
- else
- tmslow &= ~B43_TMSLOW_MACPHYCLKEN;
- ssb_write32(dev->sdev, SSB_TMSLOW, tmslow);
+ u32 tmp;
+
+ switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+ case B43_BUS_BCMA:
+ tmp = bcma_read32(dev->dev->bdev, BCMA_IOCTL);
+ if (on)
+ tmp |= B43_BCMA_IOCTL_MACPHYCLKEN;
+ else
+ tmp &= ~B43_BCMA_IOCTL_MACPHYCLKEN;
+ bcma_write32(dev->dev->bdev, BCMA_IOCTL, tmp);
+ break;
+#endif
+#ifdef CONFIG_B43_SSB
+ case B43_BUS_SSB:
+ tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
+ if (on)
+ tmp |= B43_TMSLOW_MACPHYCLKEN;
+ else
+ tmp &= ~B43_TMSLOW_MACPHYCLKEN;
+ ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
+ break;
+#endif
+ }
}
static void b43_adjust_opmode(struct b43_wldev *dev)
b43_mac_phy_clock_set(dev, true);
- b43_write16(dev, B43_MMIO_POWERUP_DELAY,
- dev->sdev->bus->chipco.fast_pwrup_delay);
+ switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+ case B43_BUS_BCMA:
+ /* FIXME: 0xE74 is quite common, but should be read from CC */
+ b43_write16(dev, B43_MMIO_POWERUP_DELAY, 0xE74);
+ break;
+#endif
+#ifdef CONFIG_B43_SSB
+ case B43_BUS_SSB:
+ b43_write16(dev, B43_MMIO_POWERUP_DELAY,
+ dev->dev->sdev->bus->chipco.fast_pwrup_delay);
+ break;
+#endif
+ }
err = 0;
b43dbg(dev->wl, "Chip initialized\n");
static void b43_put_phy_into_reset(struct b43_wldev *dev)
{
- struct ssb_device *sdev = dev->sdev;
- u32 tmslow;
+ u32 tmp;
- tmslow = ssb_read32(sdev, SSB_TMSLOW);
- tmslow &= ~B43_TMSLOW_GMODE;
- tmslow |= B43_TMSLOW_PHYRESET;
- tmslow |= SSB_TMSLOW_FGC;
- ssb_write32(sdev, SSB_TMSLOW, tmslow);
- msleep(1);
+ switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+ case B43_BUS_BCMA:
+ b43err(dev->wl,
+ "Putting PHY into reset not supported on BCMA\n");
+ break;
+#endif
+#ifdef CONFIG_B43_SSB
+ case B43_BUS_SSB:
+ tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
+ tmp &= ~B43_TMSLOW_GMODE;
+ tmp |= B43_TMSLOW_PHYRESET;
+ tmp |= SSB_TMSLOW_FGC;
+ ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
+ msleep(1);
+
+ tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
+ tmp &= ~SSB_TMSLOW_FGC;
+ tmp |= B43_TMSLOW_PHYRESET;
+ ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
+ msleep(1);
- tmslow = ssb_read32(sdev, SSB_TMSLOW);
- tmslow &= ~SSB_TMSLOW_FGC;
- tmslow |= B43_TMSLOW_PHYRESET;
- ssb_write32(sdev, SSB_TMSLOW, tmslow);
- msleep(1);
+ break;
+#endif
+ }
}
static const char *band_to_string(enum ieee80211_band band)
if (phy_rev > 1)
unsupported = 1;
break;
+#endif
+#ifdef CONFIG_B43_PHY_LCN
+ case B43_PHYTYPE_LCN:
+ if (phy_rev > 1)
+ unsupported = 1;
+ break;
#endif
default:
unsupported = 1;
analog_type, phy_type, phy_rev);
/* Get RADIO versioning */
- if (dev->dev->chip_id == 0x4317) {
- if (dev->dev->chip_rev == 0)
- tmp = 0x3205017F;
- else if (dev->dev->chip_rev == 1)
- tmp = 0x4205017F;
- else
- tmp = 0x5205017F;
+ if (dev->dev->core_rev >= 24) {
+ u16 radio24[3];
+
+ for (tmp = 0; tmp < 3; tmp++) {
+ b43_write16(dev, B43_MMIO_RADIO24_CONTROL, tmp);
+ radio24[tmp] = b43_read16(dev, B43_MMIO_RADIO24_DATA);
+ }
+
+ /* Broadcom uses "id" for our "ver" and has separated "ver" */
+ /* radio_ver = (radio24[0] & 0xF0) >> 4; */
+
+ radio_manuf = 0x17F;
+ radio_ver = (radio24[2] << 8) | radio24[1];
+ radio_rev = (radio24[0] & 0xF);
} else {
- b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID);
- tmp = b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
- b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID);
- tmp |= (u32)b43_read16(dev, B43_MMIO_RADIO_DATA_HIGH) << 16;
- }
- radio_manuf = (tmp & 0x00000FFF);
- radio_ver = (tmp & 0x0FFFF000) >> 12;
- radio_rev = (tmp & 0xF0000000) >> 28;
+ if (dev->dev->chip_id == 0x4317) {
+ if (dev->dev->chip_rev == 0)
+ tmp = 0x3205017F;
+ else if (dev->dev->chip_rev == 1)
+ tmp = 0x4205017F;
+ else
+ tmp = 0x5205017F;
+ } else {
+ b43_write16(dev, B43_MMIO_RADIO_CONTROL,
+ B43_RADIOCTL_ID);
+ tmp = b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
+ b43_write16(dev, B43_MMIO_RADIO_CONTROL,
+ B43_RADIOCTL_ID);
+ tmp |= (u32)b43_read16(dev, B43_MMIO_RADIO_DATA_HIGH)
+ << 16;
+ }
+ radio_manuf = (tmp & 0x00000FFF);
+ radio_ver = (tmp & 0x0FFFF000) >> 12;
+ radio_rev = (tmp & 0xF0000000) >> 28;
+ }
+
if (radio_manuf != 0x17F /* Broadcom */)
unsupported = 1;
switch (phy_type) {
if (radio_ver != 0x2059)
unsupported = 1;
break;
+ case B43_PHYTYPE_LCN:
+ if (radio_ver != 0x2064)
+ unsupported = 1;
+ break;
default:
B43_WARN_ON(1);
}
/* Initialize a wireless core */
static int b43_wireless_core_init(struct b43_wldev *dev)
{
- struct ssb_bus *bus = dev->sdev->bus;
struct ssb_sprom *sprom = dev->dev->bus_sprom;
struct b43_phy *phy = &dev->phy;
int err;
phy->ops->prepare_structs(dev);
/* Enable IRQ routing to this device. */
- ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->sdev);
+ switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+ case B43_BUS_BCMA:
+ bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci,
+ dev->dev->bdev, true);
+ break;
+#endif
+#ifdef CONFIG_B43_SSB
+ case B43_BUS_SSB:
+ ssb_pcicore_dev_irqvecs_enable(&dev->dev->sdev->bus->pcicore,
+ dev->dev->sdev);
+ break;
+#endif
+ }
b43_imcfglo_timeouts_workaround(dev);
b43_bluetooth_coext_disable(dev);
if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)
hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */
#ifdef CONFIG_SSB_DRIVER_PCICORE
- if ((bus->bustype == SSB_BUSTYPE_PCI) &&
- (bus->pcicore.dev->id.revision <= 10))
+ if (dev->dev->bus_type == B43_BUS_SSB &&
+ dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI &&
+ dev->dev->sdev->bus->pcicore.dev->id.revision <= 10)
hf |= B43_HF_PCISCW; /* PCI slow clock workaround. */
#endif
hf &= ~B43_HF_SKCFPUP;
static int b43_wireless_core_attach(struct b43_wldev *dev)
{
struct b43_wl *wl = dev->wl;
- struct ssb_bus *bus = dev->sdev->bus;
- struct pci_dev *pdev = (bus->bustype == SSB_BUSTYPE_PCI) ? bus->host_pci : NULL;
+ struct pci_dev *pdev = NULL;
int err;
bool have_2ghz_phy = 0, have_5ghz_phy = 0;
* that in core_init(), too.
*/
+#ifdef CONFIG_B43_SSB
+ if (dev->dev->bus_type == B43_BUS_SSB &&
+ dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI)
+ pdev = dev->dev->sdev->bus->host_pci;
+#endif
+
err = b43_bus_powerup(dev, 0);
if (err) {
b43err(wl, "Bus powerup failed\n");
goto out;
}
- /* Get the PHY type. */
- if (dev->dev->core_rev >= 5) {
- u32 tmshigh;
- tmshigh = ssb_read32(dev->sdev, SSB_TMSHIGH);
- have_2ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY);
- have_5ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_5GHZ_PHY);
- } else
- B43_WARN_ON(1);
+ /* Get the PHY type. */
+ switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+ case B43_BUS_BCMA:
+ /* FIXME */
+ have_2ghz_phy = 1;
+ have_5ghz_phy = 0;
+ break;
+#endif
+#ifdef CONFIG_B43_SSB
+ case B43_BUS_SSB:
+ if (dev->dev->core_rev >= 5) {
+ u32 tmshigh = ssb_read32(dev->dev->sdev, SSB_TMSHIGH);
+ have_2ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY);
+ have_5ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_5GHZ_PHY);
+ } else
+ B43_WARN_ON(1);
+ break;
+#endif
+ }
dev->phy.gmode = have_2ghz_phy;
dev->phy.radio_on = 1;
#endif
case B43_PHYTYPE_G:
case B43_PHYTYPE_N:
+ case B43_PHYTYPE_HT:
+ case B43_PHYTYPE_LCN:
have_2ghz_phy = 1;
break;
default:
/* Do not cancel ieee80211-workqueue based work here.
* See comment in b43_remove(). */
- wldev = ssb_get_drvdata(dev->sdev);
+ wldev = b43_bus_get_wldev(dev);
wl = wldev->wl;
b43_debugfs_remove_device(wldev);
b43_wireless_core_detach(wldev);
list_del(&wldev->list);
wl->nr_devs--;
- ssb_set_drvdata(dev->sdev, NULL);
+ b43_bus_set_wldev(dev, NULL);
kfree(wldev);
}
wldev->use_pio = b43_modparam_pio;
wldev->dev = dev;
- wldev->sdev = dev->sdev; /* TODO: Remove when not needed */
wldev->wl = wl;
b43_set_status(wldev, B43_STAT_UNINIT);
wldev->bad_frames_preempt = modparam_bad_frames_preempt;
list_add(&wldev->list, &wl->devlist);
wl->nr_devs++;
- ssb_set_drvdata(dev->sdev, wldev);
+ b43_bus_set_wldev(dev, wldev);
b43_debugfs_add_device(wldev);
out:
ieee80211_free_hw(hw);
}
-static struct b43_wl *b43_wireless_init(struct ssb_device *dev)
+static struct b43_wl *b43_wireless_init(struct b43_bus_dev *dev)
{
- struct ssb_sprom *sprom = &dev->bus->sprom;
+ struct ssb_sprom *sprom = dev->bus_sprom;
struct ieee80211_hw *hw;
struct b43_wl *wl;
skb_queue_head_init(&wl->tx_queue);
b43info(wl, "Broadcom %04X WLAN found (core revision %u)\n",
- dev->bus->chip_id, dev->id.revision);
+ dev->chip_id, dev->core_rev);
return wl;
}
#ifdef CONFIG_B43_BCMA
static int b43_bcma_probe(struct bcma_device *core)
{
+ struct b43_bus_dev *dev;
+
+ dev = b43_bus_dev_bcma_init(core);
+ if (!dev)
+ return -ENODEV;
+
b43err(NULL, "BCMA is not supported yet!");
+ kfree(dev);
return -EOPNOTSUPP;
}
/* Probing the first core. Must setup common struct b43_wl */
first = 1;
b43_sprom_fixup(sdev->bus);
- wl = b43_wireless_init(sdev);
+ wl = b43_wireless_init(dev);
if (IS_ERR(wl)) {
err = PTR_ERR(wl);
goto out;
git.openpandora.org / pandora-kernel.git / blobdiff