* Aug 8, 1998 acme Initial version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h> /* __init */
#include <linux/module.h>
#include <linux/kernel.h> /* printk(), and other useful stuff */
/* Global Data */
/* private data */
-static const char modname[] = "cycx_drv";
static const char fullname[] = "Cyclom 2X Support Module";
-static const char copyright[] = "(c) 1998-2003 Arnaldo Carvalho de Melo "
-
"<acme@conectiva.com.br>";
+static const char copyright[] =
+
"(c) 1998-2003 Arnaldo Carvalho de Melo <acme@conectiva.com.br>";
/* Hardware configuration options.
* These are arrays of configuration options used by verification routines.
static int __init cycx_drv_init(void)
{
- printk(KERN_INFO "%s v%u.%u %s\n", fullname, MOD_VERSION, MOD_RELEASE,
- copyright);
+ pr_info("%s v%u.%u %s\n",
+ fullname, MOD_VERSION, MOD_RELEASE, copyright);
return 0;
}
/* Verify IRQ configuration options */
if (!get_option_index(cycx_2x_irq_options, hw->irq)) {
- printk(KERN_ERR "%s: IRQ %d is invalid!\n", modname, hw->irq);
+ pr_err("IRQ %d is invalid!\n", hw->irq);
return -EINVAL;
}
/* Setup adapter dual-port memory window and test memory */
if (!dpmbase) {
- printk(KERN_ERR "%s: you must specify the dpm address!\n",
- modname);
+ pr_err("you must specify the dpm address!\n");
return -EINVAL;
} else if (!get_option_index(cyc2x_dpmbase_options, dpmbase)) {
- printk(KERN_ERR "%s: memory address 0x%lX is invalid!\n",
- modname, dpmbase);
+ pr_err("memory address 0x%lX is invalid!\n", dpmbase);
return -EINVAL;
}
hw->dpmsize = CYCX_WINDOWSIZE;
if (!detect_cyc2x(hw->dpmbase)) {
- printk(KERN_ERR "%s: adapter Cyclom 2X not found at "
- "address 0x%lX!\n", modname, dpmbase);
+ pr_err("adapter Cyclom 2X not found at address 0x%lX!\n",
+ dpmbase);
return -EINVAL;
}
- printk(KERN_INFO "%s: found Cyclom 2X card at address 0x%lX.\n",
- modname, dpmbase);
+ pr_info("found Cyclom 2X card at address 0x%lX\n", dpmbase);
/* Load firmware. If loader fails then shut down adapter */
err = load_cyc2x(hw, cfm, len);
for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ)
if (buffer_load(addr, code + i,
min_t(u32, CFM_LOAD_BUFSZ, (len - i))) < 0) {
- printk(KERN_ERR "%s: Error !!\n", modname);
+ pr_err("Error !!\n");
return -1;
}
for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ)
if (buffer_load(addr, code + i,
min_t(u32, CFM_LOAD_BUFSZ, (len - i)))) {
- printk(KERN_ERR "%s: Error !!\n", modname);
+ pr_err("Error !!\n");
return -1;
}
u16 cksum;
/* Announce */
- printk(KERN_INFO "%s: firmware signature=\"%s\"\n", modname,
- cfm->signature);
+ pr_info("firmware signature=\"%s\"\n", cfm->signature);
/* Verify firmware signature */
if (strcmp(cfm->signature, CFM_SIGNATURE)) {
- printk(KERN_ERR "%s:load_cyc2x: not Cyclom-2X firmware!\n",
- modname);
+ pr_err("load_cyc2x: not Cyclom-2X firmware!\n");
return -EINVAL;
}
- printk(KERN_INFO "%s: firmware version=%u\n", modname, cfm->version);
+ pr_info("firmware version=%u\n", cfm->version);
/* Verify firmware module format version */
if (cfm->version != CFM_VERSION) {
- printk(KERN_ERR "%s:%s: firmware format %u rejected! "
- "Expecting %u.\n",
- modname, __func__, cfm->version, CFM_VERSION);
+ pr_err("%s: firmware format %u rejected! Expecting %u.\n",
+ __func__, cfm->version, CFM_VERSION);
return -EINVAL;
}
if (((len - sizeof(struct cycx_firmware) - 1) != cfm->info.codesize) ||
*/
if (cksum != cfm->checksum) {
- printk(KERN_ERR "%s:%s: firmware corrupted!\n",
- modname, __func__);
- printk(KERN_ERR " cdsize = 0x%x (expected 0x%lx)\n",
- len - (int)sizeof(struct cycx_firmware) - 1,
- cfm->info.codesize);
- printk(KERN_ERR " chksum = 0x%x (expected 0x%x)\n",
- cksum, cfm->checksum);
+ pr_err("%s: firmware corrupted!\n", __func__);
+ pr_err(" cdsize = 0x%x (expected 0x%lx)\n",
+ len - (int)sizeof(struct cycx_firmware) - 1,
+ cfm->info.codesize);
+ pr_err(" chksum = 0x%x (expected 0x%x)\n",
+ cksum, cfm->checksum);
return -EINVAL;
}
/* If everything is ok, set reset, data and code pointers */
img_hdr = (struct cycx_fw_header *)&cfm->image;
#ifdef FIRMWARE_DEBUG
- printk(KERN_INFO "%s:%s: image sizes\n", __func__, modname);
- printk(KERN_INFO " reset=%lu\n", img_hdr->reset_size);
- printk(KERN_INFO " data=%lu\n", img_hdr->data_size);
- printk(KERN_INFO " code=%lu\n", img_hdr->code_size);
+ pr_info("%s: image sizes\n", __func__);
+ pr_info(" reset=%lu\n", img_hdr->reset_size);
+ pr_info(" data=%lu\n", img_hdr->data_size);
+ pr_info(" code=%lu\n", img_hdr->code_size);
#endif
reset_image = ((u8 *)img_hdr) + sizeof(struct cycx_fw_header);
data_image = reset_image + img_hdr->reset_size;
/*---- Start load ----*/
/* Announce */
- printk(KERN_INFO "%s: loading firmware %s (ID=%u)...\n", modname,
- cfm->descr[0] ? cfm->descr : "unknown firmware",
- cfm->info.codeid);
+ pr_info("loading firmware %s (ID=%u)...\n",
+ cfm->descr[0] ? cfm->descr : "unknown firmware",
+ cfm->info.codeid);
for (i = 0 ; i < 5 ; i++) {
/* Reset Cyclom hardware */
if (!reset_cyc2x(hw->dpmbase)) {
- printk(KERN_ERR "%s: dpm problem or board not found\n",
- modname);
+ pr_err("dpm problem or board not found\n");
return -EINVAL;
}
msleep_interruptible(1 * 1000);
}
- printk(KERN_ERR "%s: reset not started.\n", modname);
+ pr_err("reset not started\n");
return -EINVAL;
reset_loaded:
/* Load data.bin */
if (cycx_data_boot(hw->dpmbase, data_image, img_hdr->data_size)) {
- printk(KERN_ERR "%s: cannot load data file.\n", modname);
+ pr_err("cannot load data file\n");
return -EINVAL;
}
/* Load code.bin */
if (cycx_code_boot(hw->dpmbase, code_image, img_hdr->code_size)) {
- printk(KERN_ERR "%s: cannot load code file.\n", modname);
+ pr_err("cannot load code file\n");
return -EINVAL;
}
/* Arthur Ganzert's tip: wait a while after the firmware loading...
seg abr 26 17:17:12 EST 1999 - acme */
msleep_interruptible(7 * 1000);
- printk(KERN_INFO "%s: firmware loaded!\n", modname);
+ pr_info("firmware loaded!\n");
/* enable interrupts */
cycx_inten(hw);
git.openpandora.org / pandora-kernel.git / blobdiff