tehuti: Use request_firmware()

[pandora-kernel.git] / drivers / net / tehuti.c

diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index a7a4dc4..7debd1e 100644 (file)
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -63,7 +63,6 @@
  */
 
 #include "tehuti.h"
-#include "tehuti_fw.h"
 
 static struct pci_device_id __devinitdata bdx_pci_tbl[] = {
        {0x1FC9, 0x3009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
@@ -265,8 +264,8 @@ static irqreturn_t bdx_isr_napi(int irq, void *dev)
                bdx_isr_extra(priv, isr);
 
        if (isr & (IR_RX_DESC_0 | IR_TX_FREE_0)) {
-               if (likely(netif_rx_schedule_prep(&priv->napi))) {
-                       __netif_rx_schedule(&priv->napi);
+               if (likely(napi_schedule_prep(&priv->napi))) {
+                       __napi_schedule(&priv->napi);
                        RET(IRQ_HANDLED);
                } else {
                        /* NOTE: we get here if intr has slipped into window
@@ -302,7 +301,7 @@ static int bdx_poll(struct napi_struct *napi, int budget)
                 * device lock and allow waiting tasks (eg rmmod) to advance) */
                priv->napi_stop = 0;
 
-               netif_rx_complete(napi);
+               napi_complete(napi);
                bdx_enable_interrupts(priv);
        }
        return work_done;
@@ -318,28 +317,41 @@ static int bdx_poll(struct napi_struct *napi, int budget)
 
 static int bdx_fw_load(struct bdx_priv *priv)
 {
+       const struct firmware *fw = NULL;
        int master, i;
+       int rc;
 
        ENTER;
        master = READ_REG(priv, regINIT_SEMAPHORE);
        if (!READ_REG(priv, regINIT_STATUS) && master) {
-               bdx_tx_push_desc_safe(priv, s_firmLoad, sizeof(s_firmLoad));
+               rc = request_firmware(&fw, "tehuti/firmware.bin", &priv->pdev->dev);
+               if (rc)
+                       goto out;
+               bdx_tx_push_desc_safe(priv, (char *)fw->data, fw->size);
                mdelay(100);
        }
        for (i = 0; i < 200; i++) {
-               if (READ_REG(priv, regINIT_STATUS))
-                       break;
+               if (READ_REG(priv, regINIT_STATUS)) {
+                       rc = 0;
+                       goto out;
+               }
                mdelay(2);
        }
+       rc = -EIO;
+out:
        if (master)
                WRITE_REG(priv, regINIT_SEMAPHORE, 1);
+       if (fw)
+               release_firmware(fw);
 
-       if (i == 200) {
+       if (rc) {
                ERR("%s: firmware loading failed\n", priv->ndev->name);
-               DBG("VPC = 0x%x VIC = 0x%x INIT_STATUS = 0x%x i=%d\n",
-                   READ_REG(priv, regVPC),
-                   READ_REG(priv, regVIC), READ_REG(priv, regINIT_STATUS), i);
-               RET(-EIO);
+               if (rc == -EIO)
+                       DBG("VPC = 0x%x VIC = 0x%x INIT_STATUS = 0x%x i=%d\n",
+                           READ_REG(priv, regVPC),
+                           READ_REG(priv, regVIC),
+                           READ_REG(priv, regINIT_STATUS), i);
+               RET(rc);
        } else {
                DBG("%s: firmware loading success\n", priv->ndev->name);
                RET(0);
@@ -617,13 +629,6 @@ err:
        RET(rc);
 }
 
-static void __init bdx_firmware_endianess(void)
-{
-       int i;
-       for (i = 0; i < ARRAY_SIZE(s_firmLoad); i++)
-               s_firmLoad[i] = CPU_CHIP_SWAP32(s_firmLoad[i]);
-}
-
 static int bdx_range_check(struct bdx_priv *priv, u32 offset)
 {
        return (offset > (u32) (BDX_REGS_SIZE / priv->nic->port_num)) ?
@@ -2501,7 +2506,6 @@ static void __init print_driver_id(void)
 static int __init bdx_module_init(void)
 {
        ENTER;
-       bdx_firmware_endianess();
        init_txd_sizes();
        print_driver_id();
        RET(pci_register_driver(&bdx_pci_driver));
@@ -2521,3 +2525,4 @@ module_exit(bdx_module_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(BDX_DRV_DESC);
+MODULE_FIRMWARE("tehuti/firmware.bin");