*
* This file could be shared with other drivers.
*
- * (c) 2002, Benjamin Herrenscmidt (benh@kernel.crashing.org)
+ * (c) 2002-2007, Benjamin Herrenscmidt (benh@kernel.crashing.org)
*
* TODO:
- * - Implement WOL
* - Add support for PHYs that provide an IRQ line
* - Eventually moved the entire polling state machine in
* there (out of the eth driver), so that it can easily be
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/sched.h>
#include <linux/types.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
return 0;
}
+static int bcm5241_init(struct mii_phy* phy)
+{
+ u16 data;
+
+ data = phy_read(phy, MII_BCM5221_TEST);
+ phy_write(phy, MII_BCM5221_TEST,
+ data | MII_BCM5221_TEST_ENABLE_SHADOWS);
+
+ data = phy_read(phy, MII_BCM5221_SHDOW_AUX_STAT2);
+ phy_write(phy, MII_BCM5221_SHDOW_AUX_STAT2,
+ data | MII_BCM5221_SHDOW_AUX_STAT2_APD);
+
+ data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
+ phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
+ data & ~MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR);
+
+ data = phy_read(phy, MII_BCM5221_TEST);
+ phy_write(phy, MII_BCM5221_TEST,
+ data & ~MII_BCM5221_TEST_ENABLE_SHADOWS);
+
+ return 0;
+}
+
+static int bcm5241_suspend(struct mii_phy* phy)
+{
+ u16 data;
+
+ data = phy_read(phy, MII_BCM5221_TEST);
+ phy_write(phy, MII_BCM5221_TEST,
+ data | MII_BCM5221_TEST_ENABLE_SHADOWS);
+
+ data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
+ phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
+ data | MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR);
+
+ return 0;
+}
+
static int bcm5400_init(struct mii_phy* phy)
{
u16 data;
return 0;
}
+static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
+{
+ u16 ctl, adv;
+
+ phy->autoneg = 1;
+ phy->speed = SPEED_10;
+ phy->duplex = DUPLEX_HALF;
+ phy->pause = 0;
+ phy->advertising = advertise;
+
+ /* Setup standard advertise */
+ adv = phy_read(phy, MII_ADVERTISE);
+ adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
+ if (advertise & ADVERTISED_10baseT_Half)
+ adv |= ADVERTISE_10HALF;
+ if (advertise & ADVERTISED_10baseT_Full)
+ adv |= ADVERTISE_10FULL;
+ if (advertise & ADVERTISED_100baseT_Half)
+ adv |= ADVERTISE_100HALF;
+ if (advertise & ADVERTISED_100baseT_Full)
+ adv |= ADVERTISE_100FULL;
+ phy_write(phy, MII_ADVERTISE, adv);
+
+ /* Start/Restart aneg */
+ ctl = phy_read(phy, MII_BMCR);
+ ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ phy_write(phy, MII_BMCR, ctl);
+
+ return 0;
+}
+
+static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
+{
+ u16 ctl;
+
+ phy->autoneg = 0;
+ phy->speed = speed;
+ phy->duplex = fd;
+ phy->pause = 0;
+
+ ctl = phy_read(phy, MII_BMCR);
+ ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_ANENABLE);
+
+ /* First reset the PHY */
+ phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
+
+ /* Select speed & duplex */
+ switch(speed) {
+ case SPEED_10:
+ break;
+ case SPEED_100:
+ ctl |= BMCR_SPEED100;
+ break;
+ case SPEED_1000:
+ default:
+ return -EINVAL;
+ }
+ if (fd == DUPLEX_FULL)
+ ctl |= BMCR_FULLDPLX;
+ phy_write(phy, MII_BMCR, ctl);
+
+ return 0;
+}
+
+static int genmii_poll_link(struct mii_phy *phy)
+{
+ u16 status;
+
+ (void)phy_read(phy, MII_BMSR);
+ status = phy_read(phy, MII_BMSR);
+ if ((status & BMSR_LSTATUS) == 0)
+ return 0;
+ if (phy->autoneg && !(status & BMSR_ANEGCOMPLETE))
+ return 0;
+ return 1;
+}
+
+static int genmii_read_link(struct mii_phy *phy)
+{
+ u16 lpa;
+
+ if (phy->autoneg) {
+ lpa = phy_read(phy, MII_LPA);
+
+ if (lpa & (LPA_10FULL | LPA_100FULL))
+ phy->duplex = DUPLEX_FULL;
+ else
+ phy->duplex = DUPLEX_HALF;
+ if (lpa & (LPA_100FULL | LPA_100HALF))
+ phy->speed = SPEED_100;
+ else
+ phy->speed = SPEED_10;
+ phy->pause = 0;
+ }
+ /* On non-aneg, we assume what we put in BMCR is the speed,
+ * though magic-aneg shouldn't prevent this case from occurring
+ */
+
+ return 0;
+}
+
static int generic_suspend(struct mii_phy* phy)
{
phy_write(phy, MII_BMCR, BMCR_PDOWN);
if (phy->platform_data) {
struct device_node *np = of_get_parent(phy->platform_data);
int can_low_power = 1;
- if (np == NULL || get_property(np, "no-autolowpower", NULL))
+ if (np == NULL || of_get_property(np, "no-autolowpower", NULL))
can_low_power = 0;
if (can_low_power) {
/* Enable automatic low-power */
return 0;
}
-static int bcm5421_enable_fiber(struct mii_phy* phy)
-{
- /* enable fiber mode */
- phy_write(phy, MII_NCONFIG, 0x9020);
- /* LEDs active in both modes, autosense prio = fiber */
- phy_write(phy, MII_NCONFIG, 0x945f);
-
- /* switch off fibre autoneg */
- phy_write(phy, MII_NCONFIG, 0xfc01);
- phy_write(phy, 0x0b, 0x0004);
-
- return 0;
-}
-
-static int bcm5461_enable_fiber(struct mii_phy* phy)
-{
- phy_write(phy, MII_NCONFIG, 0xfc0c);
- phy_write(phy, MII_BMCR, 0x4140);
- phy_write(phy, MII_NCONFIG, 0xfc0b);
- phy_write(phy, MII_BMCR, 0x0140);
-
- return 0;
-}
-
static int bcm54xx_setup_aneg(struct mii_phy *phy, u32 advertise)
{
u16 ctl, adv;
adv |= ADVERTISE_100HALF;
if (advertise & ADVERTISED_100baseT_Full)
adv |= ADVERTISE_100FULL;
+ if (advertise & ADVERTISED_Pause)
+ adv |= ADVERTISE_PAUSE_CAP;
+ if (advertise & ADVERTISED_Asym_Pause)
+ adv |= ADVERTISE_PAUSE_ASYM;
phy_write(phy, MII_ADVERTISE, adv);
/* Setup 1000BT advertise */
val = phy_read(phy, MII_BCM5400_AUXSTATUS);
link_mode = ((val & MII_BCM5400_AUXSTATUS_LINKMODE_MASK) >>
MII_BCM5400_AUXSTATUS_LINKMODE_SHIFT);
- phy->duplex = phy_BCM5400_link_table[link_mode][0] ? DUPLEX_FULL : DUPLEX_HALF;
+ phy->duplex = phy_BCM5400_link_table[link_mode][0] ?
+ DUPLEX_FULL : DUPLEX_HALF;
phy->speed = phy_BCM5400_link_table[link_mode][2] ?
SPEED_1000 :
- (phy_BCM5400_link_table[link_mode][1] ? SPEED_100 : SPEED_10);
+ (phy_BCM5400_link_table[link_mode][1] ?
+ SPEED_100 : SPEED_10);
val = phy_read(phy, MII_LPA);
- phy->pause = ((val & LPA_PAUSE) != 0);
+ phy->pause = (phy->duplex == DUPLEX_FULL) &&
+ ((val & LPA_PAUSE) != 0);
}
/* On non-aneg, we assume what we put in BMCR is the speed,
* though magic-aneg shouldn't prevent this case from occurring
return 0;
}
+static int marvell88e1111_init(struct mii_phy* phy)
+{
+ u16 rev;
+
+ /* magic init sequence for rev 0 */
+ rev = phy_read(phy, MII_PHYSID2) & 0x000f;
+ if (rev == 0) {
+ phy_write(phy, 0x1d, 0x000a);
+ phy_write(phy, 0x1e, 0x0821);
+
+ phy_write(phy, 0x1d, 0x0006);
+ phy_write(phy, 0x1e, 0x8600);
+
+ phy_write(phy, 0x1d, 0x000b);
+ phy_write(phy, 0x1e, 0x0100);
+
+ phy_write(phy, 0x1d, 0x0004);
+ phy_write(phy, 0x1e, 0x4850);
+ }
+ return 0;
+}
+
+#define BCM5421_MODE_MASK (1 << 5)
+
+static int bcm5421_poll_link(struct mii_phy* phy)
+{
+ u32 phy_reg;
+ int mode;
+
+ /* find out in what mode we are */
+ phy_write(phy, MII_NCONFIG, 0x1000);
+ phy_reg = phy_read(phy, MII_NCONFIG);
+
+ mode = (phy_reg & BCM5421_MODE_MASK) >> 5;
+
+ if ( mode == BCM54XX_COPPER)
+ return genmii_poll_link(phy);
+
+ /* try to find out wether we have a link */
+ phy_write(phy, MII_NCONFIG, 0x2000);
+ phy_reg = phy_read(phy, MII_NCONFIG);
+
+ if (phy_reg & 0x0020)
+ return 0;
+ else
+ return 1;
+}
+
+static int bcm5421_read_link(struct mii_phy* phy)
+{
+ u32 phy_reg;
+ int mode;
+
+ /* find out in what mode we are */
+ phy_write(phy, MII_NCONFIG, 0x1000);
+ phy_reg = phy_read(phy, MII_NCONFIG);
+
+ mode = (phy_reg & BCM5421_MODE_MASK ) >> 5;
+
+ if ( mode == BCM54XX_COPPER)
+ return bcm54xx_read_link(phy);
+
+ phy->speed = SPEED_1000;
+
+ /* find out wether we are running half- or full duplex */
+ phy_write(phy, MII_NCONFIG, 0x2000);
+ phy_reg = phy_read(phy, MII_NCONFIG);
+
+ if ( (phy_reg & 0x0080) >> 7)
+ phy->duplex |= DUPLEX_HALF;
+ else
+ phy->duplex |= DUPLEX_FULL;
+
+ return 0;
+}
+
+static int bcm5421_enable_fiber(struct mii_phy* phy, int autoneg)
+{
+ /* enable fiber mode */
+ phy_write(phy, MII_NCONFIG, 0x9020);
+ /* LEDs active in both modes, autosense prio = fiber */
+ phy_write(phy, MII_NCONFIG, 0x945f);
+
+ if (!autoneg) {
+ /* switch off fibre autoneg */
+ phy_write(phy, MII_NCONFIG, 0xfc01);
+ phy_write(phy, 0x0b, 0x0004);
+ }
+
+ phy->autoneg = autoneg;
+
+ return 0;
+}
+
+#define BCM5461_FIBER_LINK (1 << 2)
+#define BCM5461_MODE_MASK (3 << 1)
+
+static int bcm5461_poll_link(struct mii_phy* phy)
+{
+ u32 phy_reg;
+ int mode;
+
+ /* find out in what mode we are */
+ phy_write(phy, MII_NCONFIG, 0x7c00);
+ phy_reg = phy_read(phy, MII_NCONFIG);
+
+ mode = (phy_reg & BCM5461_MODE_MASK ) >> 1;
+
+ if ( mode == BCM54XX_COPPER)
+ return genmii_poll_link(phy);
+
+ /* find out wether we have a link */
+ phy_write(phy, MII_NCONFIG, 0x7000);
+ phy_reg = phy_read(phy, MII_NCONFIG);
+
+ if (phy_reg & BCM5461_FIBER_LINK)
+ return 1;
+ else
+ return 0;
+}
+
+#define BCM5461_FIBER_DUPLEX (1 << 3)
+
+static int bcm5461_read_link(struct mii_phy* phy)
+{
+ u32 phy_reg;
+ int mode;
+
+ /* find out in what mode we are */
+ phy_write(phy, MII_NCONFIG, 0x7c00);
+ phy_reg = phy_read(phy, MII_NCONFIG);
+
+ mode = (phy_reg & BCM5461_MODE_MASK ) >> 1;
+
+ if ( mode == BCM54XX_COPPER) {
+ return bcm54xx_read_link(phy);
+ }
+
+ phy->speed = SPEED_1000;
+
+ /* find out wether we are running half- or full duplex */
+ phy_write(phy, MII_NCONFIG, 0x7000);
+ phy_reg = phy_read(phy, MII_NCONFIG);
+
+ if (phy_reg & BCM5461_FIBER_DUPLEX)
+ phy->duplex |= DUPLEX_FULL;
+ else
+ phy->duplex |= DUPLEX_HALF;
+
+ return 0;
+}
+
+static int bcm5461_enable_fiber(struct mii_phy* phy, int autoneg)
+{
+ /* select fiber mode, enable 1000 base-X registers */
+ phy_write(phy, MII_NCONFIG, 0xfc0b);
+
+ if (autoneg) {
+ /* enable fiber with no autonegotiation */
+ phy_write(phy, MII_ADVERTISE, 0x01e0);
+ phy_write(phy, MII_BMCR, 0x1140);
+ } else {
+ /* enable fiber with autonegotiation */
+ phy_write(phy, MII_BMCR, 0x0140);
+ }
+
+ phy->autoneg = autoneg;
+
+ return 0;
+}
+
static int marvell_setup_aneg(struct mii_phy *phy, u32 advertise)
{
u16 ctl, adv;
adv |= ADVERTISE_100HALF;
if (advertise & ADVERTISED_100baseT_Full)
adv |= ADVERTISE_100FULL;
+ if (advertise & ADVERTISED_Pause)
+ adv |= ADVERTISE_PAUSE_CAP;
+ if (advertise & ADVERTISED_Asym_Pause)
+ adv |= ADVERTISE_PAUSE_ASYM;
phy_write(phy, MII_ADVERTISE, adv);
/* Setup 1000BT advertise & enable crossover detect
static int marvell_read_link(struct mii_phy *phy)
{
- u16 status;
+ u16 status, pmask;
if (phy->autoneg) {
status = phy_read(phy, MII_M1011_PHY_SPEC_STATUS);
phy->duplex = DUPLEX_FULL;
else
phy->duplex = DUPLEX_HALF;
- phy->pause = 0; /* XXX Check against spec ! */
+ pmask = MII_M1011_PHY_SPEC_STATUS_TX_PAUSE |
+ MII_M1011_PHY_SPEC_STATUS_RX_PAUSE;
+ phy->pause = (status & pmask) == pmask;
}
/* On non-aneg, we assume what we put in BMCR is the speed,
* though magic-aneg shouldn't prevent this case from occurring
return 0;
}
-static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
-{
- u16 ctl, adv;
-
- phy->autoneg = 1;
- phy->speed = SPEED_10;
- phy->duplex = DUPLEX_HALF;
- phy->pause = 0;
- phy->advertising = advertise;
-
- /* Setup standard advertise */
- adv = phy_read(phy, MII_ADVERTISE);
- adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
- if (advertise & ADVERTISED_10baseT_Half)
- adv |= ADVERTISE_10HALF;
- if (advertise & ADVERTISED_10baseT_Full)
- adv |= ADVERTISE_10FULL;
- if (advertise & ADVERTISED_100baseT_Half)
- adv |= ADVERTISE_100HALF;
- if (advertise & ADVERTISED_100baseT_Full)
- adv |= ADVERTISE_100FULL;
- phy_write(phy, MII_ADVERTISE, adv);
-
- /* Start/Restart aneg */
- ctl = phy_read(phy, MII_BMCR);
- ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
- phy_write(phy, MII_BMCR, ctl);
-
- return 0;
-}
-
-static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
-{
- u16 ctl;
-
- phy->autoneg = 0;
- phy->speed = speed;
- phy->duplex = fd;
- phy->pause = 0;
-
- ctl = phy_read(phy, MII_BMCR);
- ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_ANENABLE);
-
- /* First reset the PHY */
- phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
-
- /* Select speed & duplex */
- switch(speed) {
- case SPEED_10:
- break;
- case SPEED_100:
- ctl |= BMCR_SPEED100;
- break;
- case SPEED_1000:
- default:
- return -EINVAL;
- }
- if (fd == DUPLEX_FULL)
- ctl |= BMCR_FULLDPLX;
- phy_write(phy, MII_BMCR, ctl);
-
- return 0;
-}
-
-static int genmii_poll_link(struct mii_phy *phy)
-{
- u16 status;
-
- (void)phy_read(phy, MII_BMSR);
- status = phy_read(phy, MII_BMSR);
- if ((status & BMSR_LSTATUS) == 0)
- return 0;
- if (phy->autoneg && !(status & BMSR_ANEGCOMPLETE))
- return 0;
- return 1;
-}
-
-static int genmii_read_link(struct mii_phy *phy)
-{
- u16 lpa;
-
- if (phy->autoneg) {
- lpa = phy_read(phy, MII_LPA);
-
- if (lpa & (LPA_10FULL | LPA_100FULL))
- phy->duplex = DUPLEX_FULL;
- else
- phy->duplex = DUPLEX_HALF;
- if (lpa & (LPA_100FULL | LPA_100HALF))
- phy->speed = SPEED_100;
- else
- phy->speed = SPEED_10;
- phy->pause = 0;
- }
- /* On non-aneg, we assume what we put in BMCR is the speed,
- * though magic-aneg shouldn't prevent this case from occurring
- */
-
- return 0;
-}
-
+#define MII_BASIC_FEATURES \
+ (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \
+ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
+ SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII | \
+ SUPPORTED_Pause)
-#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \
- SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
- SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII)
-#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \
- SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)
+/* On gigabit capable PHYs, we advertise Pause support but not asym pause
+ * support for now as I'm not sure it's supported and Darwin doesn't do
+ * it neither. --BenH.
+ */
+#define MII_GBIT_FEATURES \
+ (MII_BASIC_FEATURES | \
+ SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)
/* Broadcom BCM 5201 */
static struct mii_phy_ops bcm5201_phy_ops = {
.ops = &bcm5221_phy_ops
};
+/* Broadcom BCM 5241 */
+static struct mii_phy_ops bcm5241_phy_ops = {
+ .suspend = bcm5241_suspend,
+ .init = bcm5241_init,
+ .setup_aneg = genmii_setup_aneg,
+ .setup_forced = genmii_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = genmii_read_link,
+};
+static struct mii_phy_def bcm5241_phy_def = {
+ .phy_id = 0x0143bc30,
+ .phy_id_mask = 0xfffffff0,
+ .name = "BCM5241",
+ .features = MII_BASIC_FEATURES,
+ .magic_aneg = 1,
+ .ops = &bcm5241_phy_ops
+};
+
/* Broadcom BCM 5400 */
static struct mii_phy_ops bcm5400_phy_ops = {
.init = bcm5400_init,
.suspend = generic_suspend,
.setup_aneg = bcm54xx_setup_aneg,
.setup_forced = bcm54xx_setup_forced,
- .poll_link = genmii_poll_link,
- .read_link = bcm54xx_read_link,
+ .poll_link = bcm5421_poll_link,
+ .read_link = bcm5421_read_link,
.enable_fiber = bcm5421_enable_fiber,
};
.suspend = generic_suspend,
.setup_aneg = bcm54xx_setup_aneg,
.setup_forced = bcm54xx_setup_forced,
- .poll_link = genmii_poll_link,
- .read_link = bcm54xx_read_link,
+ .poll_link = bcm5461_poll_link,
+ .read_link = bcm5461_read_link,
.enable_fiber = bcm5461_enable_fiber,
};
.ops = &bcm5462V_phy_ops
};
-/* Marvell 88E1101 (Apple seem to deal with 2 different revs,
- * I masked out the 8 last bits to get both, but some specs
- * would be useful here) --BenH.
- */
-static struct mii_phy_ops marvell_phy_ops = {
+/* Marvell 88E1101 amd 88E1111 */
+static struct mii_phy_ops marvell88e1101_phy_ops = {
+ .suspend = generic_suspend,
+ .setup_aneg = marvell_setup_aneg,
+ .setup_forced = marvell_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = marvell_read_link
+};
+
+static struct mii_phy_ops marvell88e1111_phy_ops = {
+ .init = marvell88e1111_init,
.suspend = generic_suspend,
.setup_aneg = marvell_setup_aneg,
.setup_forced = marvell_setup_forced,
.read_link = marvell_read_link
};
-static struct mii_phy_def marvell_phy_def = {
- .phy_id = 0x01410c00,
- .phy_id_mask = 0xffffff00,
- .name = "Marvell 88E1101",
+/* two revs in darwin for the 88e1101 ... I could use a datasheet
+ * to get the proper names...
+ */
+static struct mii_phy_def marvell88e1101v1_phy_def = {
+ .phy_id = 0x01410c20,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Marvell 88E1101v1",
+ .features = MII_GBIT_FEATURES,
+ .magic_aneg = 1,
+ .ops = &marvell88e1101_phy_ops
+};
+static struct mii_phy_def marvell88e1101v2_phy_def = {
+ .phy_id = 0x01410c60,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Marvell 88E1101v2",
+ .features = MII_GBIT_FEATURES,
+ .magic_aneg = 1,
+ .ops = &marvell88e1101_phy_ops
+};
+static struct mii_phy_def marvell88e1111_phy_def = {
+ .phy_id = 0x01410cc0,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Marvell 88E1111",
.features = MII_GBIT_FEATURES,
.magic_aneg = 1,
- .ops = &marvell_phy_ops
+ .ops = &marvell88e1111_phy_ops
};
/* Generic implementation for most 10/100 PHYs */
static struct mii_phy_def* mii_phy_table[] = {
&bcm5201_phy_def,
&bcm5221_phy_def,
+ &bcm5241_phy_def,
&bcm5400_phy_def,
&bcm5401_phy_def,
&bcm5411_phy_def,
&bcm5421k2_phy_def,
&bcm5461_phy_def,
&bcm5462V_phy_def,
- &marvell_phy_def,
+ &marvell88e1101v1_phy_def,
+ &marvell88e1101v2_phy_def,
+ &marvell88e1111_phy_def,
&genmii_phy_def,
NULL
};
git.openpandora.org / pandora-kernel.git / blobdiff