#include <linux/bitops.h>
#include <linux/mii.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ciscode.h>
link->priv = dev;
/* General socket configuration */
- link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
- link->conf.ConfigIndex = 1;
+ link->config_index = 1;
/* Fill in card specific entries */
dev->netdev_ops = &netdev_ops;
}
static int
-xirc2ps_config_modem(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cf,
- cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
- void *priv_data)
+xirc2ps_config_modem(struct pcmcia_device *p_dev, void *priv_data)
{
unsigned int ioaddr;
- if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
- for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
- p_dev->resource[1]->start = cf->io.win[0].base;
- p_dev->resource[0]->start = ioaddr;
- if (!pcmcia_request_io(p_dev))
- return 0;
- }
+ if ((p_dev->resource[0]->start & 0xf) == 8)
+ return -ENODEV;
+
+ p_dev->resource[0]->end = 16;
+ p_dev->resource[1]->end = 8;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
+ p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->io_lines = 10;
+
+ p_dev->resource[1]->start = p_dev->resource[0]->start;
+ for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
+ p_dev->resource[0]->start = ioaddr;
+ if (!pcmcia_request_io(p_dev))
+ return 0;
}
return -ENODEV;
}
static int
-xirc2ps_config_check(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cf,
- cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
- void *priv_data)
+xirc2ps_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
int *pass = priv_data;
+ resource_size_t tmp = p_dev->resource[1]->start;
- if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
- p_dev->resource[1]->start = cf->io.win[0].base;
- p_dev->resource[0]->start = p_dev->resource[1]->start
- + (*pass ? (cf->index & 0x20 ? -24:8)
- : (cf->index & 0x20 ? 8:-24));
- if (!pcmcia_request_io(p_dev))
- return 0;
- }
- return -ENODEV;
+ tmp += (*pass ? (p_dev->config_index & 0x20 ? -24 : 8)
+ : (p_dev->config_index & 0x20 ? 8 : -24));
+
+ if ((p_dev->resource[0]->start & 0xf) == 8)
+ return -ENODEV;
+
+ p_dev->resource[0]->end = 18;
+ p_dev->resource[1]->end = 8;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
+ p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->io_lines = 10;
+ p_dev->resource[1]->start = p_dev->resource[0]->start;
+ p_dev->resource[0]->start = tmp;
+ return pcmcia_request_io(p_dev);
}
goto failure;
}
- link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
- link->io_lines = 10;
if (local->modem) {
int pass;
+ link->config_flags |= CONF_AUTO_SET_IO;
- if (do_sound) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status |= CCSR_AUDIO_ENA;
- }
- link->resource[1]->end = 8;
- link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
if (local->dingo) {
/* Take the Modem IO port from the CIS and scan for a free
* Ethernet port */
- link->resource[0]->end = 16; /* no Mako stuff anymore */
if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL))
goto port_found;
} else {
- link->resource[0]->end = 18;
/* We do 2 passes here: The first one uses the regular mapping and
* the second tries again, thereby considering that the 32 ports are
* mirrored every 32 bytes. Actually we use a mirrored port for
* the Mako if (on the first pass) the COR bit 5 is set.
*/
for (pass=0; pass < 2; pass++)
- if (!pcmcia_loop_config(link, xirc2ps_config_check, &pass))
+ if (!pcmcia_loop_config(link, xirc2ps_config_check,
+ &pass))
goto port_found;
/* if special option:
* try to configure as Ethernet only.
}
printk(KNOT_XIRC "no ports available\n");
} else {
+ link->io_lines = 10;
link->resource[0]->end = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
link->resource[0]->start = ioaddr;
if (!(err = pcmcia_request_io(link)))
* This actually configures the PCMCIA socket -- setting up
* the I/O windows and the interrupt mapping.
*/
- if ((err=pcmcia_request_configuration(link, &link->conf)))
+ link->config_flags |= CONF_ENABLE_IRQ;
+ if (do_sound)
+ link->config_flags |= CONF_ENABLE_SPKR;
+
+ if ((err = pcmcia_enable_device(link)))
goto config_error;
if (local->dingo) {
- win_req_t req;
-
/* Reset the modem's BAR to the correct value
* This is necessary because in the RequestConfiguration call,
* the base address of the ethernet port (BasePort1) is written
* is at 0x0800. So we allocate a window into the attribute
* memory and write direct to the CIS registers
*/
- req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
- req.Base = req.Size = 0;
- req.AccessSpeed = 0;
- if ((err = pcmcia_request_window(link, &req, &link->win)))
+ link->resource[2]->flags = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM |
+ WIN_ENABLE;
+ link->resource[2]->start = link->resource[2]->end = 0;
+ if ((err = pcmcia_request_window(link, link->resource[2], 0)))
goto config_error;
- local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800;
- if ((err = pcmcia_map_mem_page(link, link->win, 0)))
+ local->dingo_ccr = ioremap(link->resource[2]->start, 0x1000) + 0x0800;
+ if ((err = pcmcia_map_mem_page(link, link->resource[2], 0)))
goto config_error;
/* Setup the CCRs; there are no infos in the CIS about the Ethernet
{
dev_dbg(&link->dev, "release\n");
- if (link->win) {
+ if (link->resource[2]->end) {
struct net_device *dev = link->priv;
local_info_t *local = netdev_priv(dev);
if (local->dingo)
git.openpandora.org / pandora-kernel.git / blobdiff