(!force) && (self->speed != -1)) {
/* No speed and xbofs change here
* (we'll do it later in the write callback) */
- IRDA_DEBUG(2, "%s(), not changing speed yet\n", __FUNCTION__);
+ IRDA_DEBUG(2, "%s(), not changing speed yet\n", __func__);
*header = 0;
return;
}
- IRDA_DEBUG(2, "%s(), changing speed to %d\n", __FUNCTION__, self->new_speed);
+ IRDA_DEBUG(2, "%s(), changing speed to %d\n", __func__, self->new_speed);
self->speed = self->new_speed;
/* We will do ` self->new_speed = -1; ' in the completion
* handler just in case the current URB fail - Jean II */
/* Set the negotiated additional XBOFS */
if (self->new_xbofs != -1) {
- IRDA_DEBUG(2, "%s(), changing xbofs to %d\n", __FUNCTION__, self->new_xbofs);
+ IRDA_DEBUG(2, "%s(), changing xbofs to %d\n", __func__, self->new_xbofs);
self->xbofs = self->new_xbofs;
/* We will do ` self->new_xbofs = -1; ' in the completion
* handler just in case the current URB fail - Jean II */
struct urb *urb;
int ret;
- IRDA_DEBUG(2, "%s(), speed=%d, xbofs=%d\n", __FUNCTION__,
+ IRDA_DEBUG(2, "%s(), speed=%d, xbofs=%d\n", __func__,
self->new_speed, self->new_xbofs);
/* Grab the speed URB */
urb = self->speed_urb;
if (urb->status != 0) {
- IRDA_WARNING("%s(), URB still in use!\n", __FUNCTION__);
+ IRDA_WARNING("%s(), URB still in use!\n", __func__);
return;
}
/* Irq disabled -> GFP_ATOMIC */
if ((ret = usb_submit_urb(urb, GFP_ATOMIC))) {
- IRDA_WARNING("%s(), failed Speed URB\n", __FUNCTION__);
+ IRDA_WARNING("%s(), failed Speed URB\n", __func__);
}
}
{
struct irda_usb_cb *self = urb->context;
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+ IRDA_DEBUG(2, "%s()\n", __func__);
/* We should always have a context */
IRDA_ASSERT(self != NULL, return;);
/* Check for timeout and other USB nasties */
if (urb->status != 0) {
/* I get a lot of -ECONNABORTED = -103 here - Jean II */
- IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __FUNCTION__, urb->status, urb->transfer_flags);
+ IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __func__, urb->status, urb->transfer_flags);
/* Don't do anything here, that might confuse the USB layer.
* Instead, we will wait for irda_usb_net_timeout(), the
int res, mtt;
int err = 1; /* Failed */
- IRDA_DEBUG(4, "%s() on %s\n", __FUNCTION__, netdev->name);
+ IRDA_DEBUG(4, "%s() on %s\n", __func__, netdev->name);
netif_stop_queue(netdev);
* We need to check self->present under the spinlock because
* of irda_usb_disconnect() is synchronous - Jean II */
if (!self->present) {
- IRDA_DEBUG(0, "%s(), Device is gone...\n", __FUNCTION__);
+ IRDA_DEBUG(0, "%s(), Device is gone...\n", __func__);
goto drop;
}
}
if (urb->status != 0) {
- IRDA_WARNING("%s(), URB still in use!\n", __FUNCTION__);
+ IRDA_WARNING("%s(), URB still in use!\n", __func__);
goto drop;
}
/* Ask USB to send the packet - Irq disabled -> GFP_ATOMIC */
if ((res = usb_submit_urb(urb, GFP_ATOMIC))) {
- IRDA_WARNING("%s(), failed Tx URB\n", __FUNCTION__);
+ IRDA_WARNING("%s(), failed Tx URB\n", __func__);
self->stats.tx_errors++;
/* Let USB recover : We will catch that in the watchdog */
/*netif_start_queue(netdev);*/
struct sk_buff *skb = urb->context;
struct irda_usb_cb *self = ((struct irda_skb_cb *) skb->cb)->context;
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+ IRDA_DEBUG(2, "%s()\n", __func__);
/* We should always have a context */
IRDA_ASSERT(self != NULL, return;);
/* Check for timeout and other USB nasties */
if (urb->status != 0) {
/* I get a lot of -ECONNABORTED = -103 here - Jean II */
- IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __FUNCTION__, urb->status, urb->transfer_flags);
+ IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __func__, urb->status, urb->transfer_flags);
/* Don't do anything here, that might confuse the USB layer,
* and we could go in recursion and blow the kernel stack...
/* If the network is closed, stop everything */
if ((!self->netopen) || (!self->present)) {
- IRDA_DEBUG(0, "%s(), Network is gone...\n", __FUNCTION__);
+ IRDA_DEBUG(0, "%s(), Network is gone...\n", __func__);
spin_unlock_irqrestore(&self->lock, flags);
return;
}
(self->new_xbofs != self->xbofs)) {
/* We haven't changed speed yet (because of
* IUC_SPEED_BUG), so do it now - Jean II */
- IRDA_DEBUG(1, "%s(), Changing speed now...\n", __FUNCTION__);
+ IRDA_DEBUG(1, "%s(), Changing speed now...\n", __func__);
irda_usb_change_speed_xbofs(self);
} else {
/* New speed and xbof is now commited in hardware */
struct urb *urb;
int done = 0; /* If we have made any progress */
- IRDA_DEBUG(0, "%s(), Network layer thinks we timed out!\n", __FUNCTION__);
+ IRDA_DEBUG(0, "%s(), Network layer thinks we timed out!\n", __func__);
IRDA_ASSERT(self != NULL, return;);
/* Protect us from USB callbacks, net Tx and else. */
/* self->present *MUST* be read under spinlock */
if (!self->present) {
- IRDA_WARNING("%s(), device not present!\n", __FUNCTION__);
+ IRDA_WARNING("%s(), device not present!\n", __func__);
netif_stop_queue(netdev);
spin_unlock_irqrestore(&self->lock, flags);
return;
struct irda_skb_cb *cb;
int ret;
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+ IRDA_DEBUG(2, "%s()\n", __func__);
/* This should never happen */
IRDA_ASSERT(skb != NULL, return;);
/* If this ever happen, we are in deep s***.
* Basically, the Rx path will stop... */
IRDA_WARNING("%s(), Failed to submit Rx URB %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
}
}
struct urb *next_urb;
unsigned int len, docopy;
- IRDA_DEBUG(2, "%s(), len=%d\n", __FUNCTION__, urb->actual_length);
+ IRDA_DEBUG(2, "%s(), len=%d\n", __func__, urb->actual_length);
/* Find ourselves */
cb = (struct irda_skb_cb *) skb->cb;
/* If the network is closed or the device gone, stop everything */
if ((!self->netopen) || (!self->present)) {
- IRDA_DEBUG(0, "%s(), Network is gone!\n", __FUNCTION__);
+ IRDA_DEBUG(0, "%s(), Network is gone!\n", __func__);
/* Don't re-submit the URB : will stall the Rx path */
return;
}
/* Usually precursor to a hot-unplug on OHCI. */
default:
self->stats.rx_errors++;
- IRDA_DEBUG(0, "%s(), RX status %d, transfer_flags 0x%04X \n", __FUNCTION__, urb->status, urb->transfer_flags);
+ IRDA_DEBUG(0, "%s(), RX status %d, transfer_flags 0x%04X \n", __func__, urb->status, urb->transfer_flags);
break;
}
/* If we received an error, we don't want to resubmit the
/* Check for empty frames */
if (urb->actual_length <= self->header_length) {
- IRDA_WARNING("%s(), empty frame!\n", __FUNCTION__);
+ IRDA_WARNING("%s(), empty frame!\n", __func__);
goto done;
}
struct irda_skb_cb *cb;
struct urb *next_urb;
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+ IRDA_DEBUG(2, "%s()\n", __func__);
/* Find ourselves */
cb = (struct irda_skb_cb *) skb->cb;
patch_block, block_size,
&actual_len, msecs_to_jiffies(500));
IRDA_DEBUG(3,"%s(): Bulk send %u bytes, ret=%d\n",
- __FUNCTION__, actual_len, ret);
+ __func__, actual_len, ret);
if (ret < 0)
break;
/* We get a patch from userspace */
IRDA_MESSAGE("%s(): Received firmware %s (%zu bytes)\n",
- __FUNCTION__, stir421x_fw_name, fw->size);
+ __func__, stir421x_fw_name, fw->size);
ret = -EINVAL;
+ (build % 10);
IRDA_DEBUG(3, "%s(): Firmware Product version %ld\n",
- __FUNCTION__, fw_version);
+ __func__, fw_version);
}
}
char hwname[16];
int i;
- IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+ IRDA_DEBUG(1, "%s()\n", __func__);
IRDA_ASSERT(netdev != NULL, return -1;);
self = (struct irda_usb_cb *) netdev->priv;
/* Can only open the device if it's there */
if(!self->present) {
spin_unlock_irqrestore(&self->lock, flags);
- IRDA_WARNING("%s(), device not present!\n", __FUNCTION__);
+ IRDA_WARNING("%s(), device not present!\n", __func__);
return -1;
}
if(self->needspatch) {
spin_unlock_irqrestore(&self->lock, flags);
- IRDA_WARNING("%s(), device needs patch\n", __FUNCTION__) ;
+ IRDA_WARNING("%s(), device needs patch\n", __func__) ;
return -EIO ;
}
/* If this ever happen, we are in deep s***.
* Basically, we can't start the Rx path... */
IRDA_WARNING("%s(), Failed to allocate Rx skb\n",
- __FUNCTION__);
+ __func__);
return -1;
}
//skb_reserve(newskb, USB_IRDA_HEADER - 1);
struct irda_usb_cb *self;
int i;
- IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+ IRDA_DEBUG(1, "%s()\n", __func__);
IRDA_ASSERT(netdev != NULL, return -1;);
self = (struct irda_usb_cb *) netdev->priv;
self = dev->priv;
IRDA_ASSERT(self != NULL, return -1;);
- IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+ IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
switch (cmd) {
case SIOCSBANDWIDTH: /* Set bandwidth */
{
struct irda_class_desc *desc;
- IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+ IRDA_DEBUG(3, "%s()\n", __func__);
desc = self->irda_desc;
self->qos.data_size.bits = desc->bmDataSize;
IRDA_DEBUG(0, "%s(), dongle says speed=0x%X, size=0x%X, window=0x%X, bofs=0x%X, turn=0x%X\n",
- __FUNCTION__, self->qos.baud_rate.bits, self->qos.data_size.bits, self->qos.window_size.bits, self->qos.additional_bofs.bits, self->qos.min_turn_time.bits);
+ __func__, self->qos.baud_rate.bits, self->qos.data_size.bits, self->qos.window_size.bits, self->qos.additional_bofs.bits, self->qos.min_turn_time.bits);
/* Don't always trust what the dongle tell us */
if(self->capability & IUC_SIR_ONLY)
{
struct net_device *netdev = self->netdev;
- IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+ IRDA_DEBUG(1, "%s()\n", __func__);
irda_usb_init_qos(self);
*/
static inline void irda_usb_close(struct irda_usb_cb *self)
{
- IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+ IRDA_DEBUG(1, "%s()\n", __func__);
/* Remove netdevice */
unregister_netdev(self->netdev);
/* This is our interrupt endpoint */
self->bulk_int_ep = ep;
} else {
- IRDA_ERROR("%s(), Unrecognised endpoint %02X.\n", __FUNCTION__, ep);
+ IRDA_ERROR("%s(), Unrecognised endpoint %02X.\n", __func__, ep);
}
}
}
IRDA_DEBUG(0, "%s(), And our endpoints are : in=%02X, out=%02X (%d), int=%02X\n",
- __FUNCTION__, self->bulk_in_ep, self->bulk_out_ep, self->bulk_out_mtu, self->bulk_int_ep);
+ __func__, self->bulk_in_ep, self->bulk_out_ep, self->bulk_out_mtu, self->bulk_int_ep);
return((self->bulk_in_ep != 0) && (self->bulk_out_ep != 0));
}
0, intf->altsetting->desc.bInterfaceNumber, desc,
sizeof(*desc), 500);
- IRDA_DEBUG(1, "%s(), ret=%d\n", __FUNCTION__, ret);
+ IRDA_DEBUG(1, "%s(), ret=%d\n", __func__, ret);
if (ret < sizeof(*desc)) {
IRDA_WARNING("usb-irda: class_descriptor read %s (%d)\n",
(ret<0) ? "failed" : "too short", ret);
/* Martin Diehl says if we get a -EPIPE we should
* be fine and we don't need to do a usb_clear_halt().
* - Jean II */
- IRDA_DEBUG(0, "%s(), Received -EPIPE, ignoring...\n", __FUNCTION__);
+ IRDA_DEBUG(0, "%s(), Received -EPIPE, ignoring...\n", __func__);
break;
default:
- IRDA_DEBUG(0, "%s(), Unknown error %d\n", __FUNCTION__, ret);
+ IRDA_DEBUG(0, "%s(), Unknown error %d\n", __func__, ret);
ret = -EIO;
goto err_out_3;
}
interface = intf->cur_altsetting;
if(!irda_usb_parse_endpoints(self, interface->endpoint,
interface->desc.bNumEndpoints)) {
- IRDA_ERROR("%s(), Bogus endpoints...\n", __FUNCTION__);
+ IRDA_ERROR("%s(), Bogus endpoints...\n", __func__);
ret = -EIO;
goto err_out_3;
}
struct irda_usb_cb *self = usb_get_intfdata(intf);
int i;
- IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+ IRDA_DEBUG(1, "%s()\n", __func__);
usb_set_intfdata(intf, NULL);
if (!self)
/* Free self and network device */
free_netdev(self->netdev);
- IRDA_DEBUG(0, "%s(), USB IrDA Disconnected\n", __FUNCTION__);
+ IRDA_DEBUG(0, "%s(), USB IrDA Disconnected\n", __func__);
}
/*------------------------------------------------------------------*/
git.openpandora.org / pandora-kernel.git / blobdiff