};
static int phy_cross = NV_CROSSOVER_DETECTION_DISABLED;
+/*
+ * Power down phy when interface is down (persists through reboot;
+ * older Linux and other OSes may not power it up again)
+ */
+static int phy_power_down = 0;
+
static inline struct fe_priv *get_nvpriv(struct net_device *dev)
{
return netdev_priv(dev);
/* restart auto negotiation, power down phy */
mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
- mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE | BMCR_PDOWN);
+ mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE);
+ if (phy_power_down) {
+ mii_control |= BMCR_PDOWN;
+ }
if (mii_rw(dev, np->phyaddr, MII_BMCR, mii_control)) {
return PHY_ERROR;
}
np->tx_pkts_in_progress = 0;
np->tx_change_owner = NULL;
np->tx_end_flip = NULL;
+ np->tx_stop = 0;
for (i = 0; i < np->tx_ring_size; i++) {
if (!nv_optimized(np)) {
struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
u32 status;
+ union ring_type put_tx;
+ int saved_tx_limit;
if (np->msi_flags & NV_MSI_X_ENABLED)
status = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQSTAT_MASK;
/* 1) stop tx engine */
nv_stop_tx(dev);
- /* 2) check that the packets were not sent already: */
+ /* 2) complete any outstanding tx and do not give HW any limited tx pkts */
+ saved_tx_limit = np->tx_limit;
+ np->tx_limit = 0; /* prevent giving HW any limited pkts */
+ np->tx_stop = 0; /* prevent waking tx queue */
if (!nv_optimized(np))
nv_tx_done(dev, np->tx_ring_size);
else
nv_tx_done_optimized(dev, np->tx_ring_size);
- /* 3) if there are dead entries: clear everything */
- if (np->get_tx_ctx != np->put_tx_ctx) {
- printk(KERN_DEBUG "%s: tx_timeout: dead entries!\n", dev->name);
- nv_drain_tx(dev);
- nv_init_tx(dev);
- setup_hw_rings(dev, NV_SETUP_TX_RING);
- }
+ /* save current HW postion */
+ if (np->tx_change_owner)
+ put_tx.ex = np->tx_change_owner->first_tx_desc;
+ else
+ put_tx = np->put_tx;
- netif_wake_queue(dev);
+ /* 3) clear all tx state */
+ nv_drain_tx(dev);
+ nv_init_tx(dev);
- /* 4) restart tx engine */
+ /* 4) restore state to current HW position */
+ np->get_tx = np->put_tx = put_tx;
+ np->tx_limit = saved_tx_limit;
+
+ /* 5) restart tx engine */
nv_start_tx(dev);
+ netif_wake_queue(dev);
spin_unlock_irq(&np->lock);
}
nv_drain_rxtx(dev);
- if (np->wolenabled) {
+ if (np->wolenabled || !phy_power_down) {
writel(NVREG_PFF_ALWAYS|NVREG_PFF_MYADDR, base + NvRegPacketFilterFlags);
nv_start_rx(dev);
} else {
MODULE_PARM_DESC(dma_64bit, "High DMA is enabled by setting to 1 and disabled by setting to 0.");
module_param(phy_cross, int, 0);
MODULE_PARM_DESC(phy_cross, "Phy crossover detection for Realtek 8201 phy is enabled by setting to 1 and disabled by setting to 0.");
+module_param(phy_power_down, int, 0);
+MODULE_PARM_DESC(phy_power_down, "Power down phy and disable link when interface is down (1), or leave phy powered up (0).");
MODULE_AUTHOR("Manfred Spraul <manfred@colorfullife.com>");
MODULE_DESCRIPTION("Reverse Engineered nForce ethernet driver");