i825xx: Move the Intel 82586/82593/82596 based drivers
[pandora-kernel.git] / drivers / net / ethernet / i825xx / ni52.h
diff --git a/drivers/net/ethernet/i825xx/ni52.h b/drivers/net/ethernet/i825xx/ni52.h
new file mode 100644 (file)
index 0000000..0a03b28
--- /dev/null
@@ -0,0 +1,310 @@
+/*
+ * Intel i82586 Ethernet definitions
+ *
+ * This is an extension to the Linux operating system, and is covered by the
+ * same GNU General Public License that covers that work.
+ *
+ * copyrights (c) 1994 by Michael Hipp (hippm@informatik.uni-tuebingen.de)
+ *
+ * I have done a look in the following sources:
+ *   crynwr-packet-driver by Russ Nelson
+ *   Garret A. Wollman's i82586-driver for BSD
+ */
+
+
+#define NI52_RESET     0  /* writing to this address, resets the i82586 */
+#define NI52_ATTENTION 1  /* channel attention, kick the 586 */
+#define NI52_TENA      3  /* 2-5 possibly wrong, Xmit enable */
+#define NI52_TDIS      2  /* Xmit disable */
+#define NI52_INTENA    5  /* Interrupt enable */
+#define NI52_INTDIS    4  /* Interrupt disable */
+#define NI52_MAGIC1    6  /* dunno exact function */
+#define NI52_MAGIC2    7  /* dunno exact function */
+
+#define NI52_MAGICVAL1 0x00  /* magic-values for ni5210 card */
+#define NI52_MAGICVAL2 0x55
+
+/*
+ * where to find the System Configuration Pointer (SCP)
+ */
+#define SCP_DEFAULT_ADDRESS 0xfffff4
+
+
+/*
+ * System Configuration Pointer Struct
+ */
+
+struct scp_struct
+{
+       u16 zero_dum0;  /* has to be zero */
+       u8 sysbus;      /* 0=16Bit,1=8Bit */
+       u8 zero_dum1;   /* has to be zero for 586 */
+       u16 zero_dum2;
+       u16 zero_dum3;
+       u32 iscp;               /* pointer to the iscp-block */
+};
+
+
+/*
+ * Intermediate System Configuration Pointer (ISCP)
+ */
+struct iscp_struct
+{
+       u8 busy;          /* 586 clears after successful init */
+       u8 zero_dummy;    /* has to be zero */
+       u16 scb_offset;    /* pointeroffset to the scb_base */
+       u32 scb_base;      /* base-address of all 16-bit offsets */
+};
+
+/*
+ * System Control Block (SCB)
+ */
+struct scb_struct
+{
+       u8 rus;
+       u8 cus;
+       u8 cmd_ruc;        /* command word: RU part */
+       u8 cmd_cuc;        /* command word: CU part & ACK */
+       u16 cbl_offset;    /* pointeroffset, command block list */
+       u16 rfa_offset;    /* pointeroffset, receive frame area */
+       u16 crc_errs;      /* CRC-Error counter */
+       u16 aln_errs;      /* alignmenterror counter */
+       u16 rsc_errs;      /* Resourceerror counter */
+       u16 ovrn_errs;     /* OVerrunerror counter */
+};
+
+/*
+ * possible command values for the command word
+ */
+#define RUC_MASK       0x0070  /* mask for RU commands */
+#define RUC_NOP                0x0000  /* NOP-command */
+#define RUC_START      0x0010  /* start RU */
+#define RUC_RESUME     0x0020  /* resume RU after suspend */
+#define RUC_SUSPEND    0x0030  /* suspend RU */
+#define RUC_ABORT      0x0040  /* abort receiver operation immediately */
+
+#define CUC_MASK        0x07  /* mask for CU command */
+#define CUC_NOP         0x00  /* NOP-command */
+#define CUC_START       0x01  /* start execution of 1. cmd on the CBL */
+#define CUC_RESUME      0x02  /* resume after suspend */
+#define CUC_SUSPEND     0x03  /* Suspend CU */
+#define CUC_ABORT       0x04  /* abort command operation immediately */
+
+#define ACK_MASK        0xf0  /* mask for ACK command */
+#define ACK_CX          0x80  /* acknowledges STAT_CX */
+#define ACK_FR          0x40  /* ack. STAT_FR */
+#define ACK_CNA         0x20  /* ack. STAT_CNA */
+#define ACK_RNR         0x10  /* ack. STAT_RNR */
+
+/*
+ * possible status values for the status word
+ */
+#define STAT_MASK       0xf0  /* mask for cause of interrupt */
+#define STAT_CX         0x80  /* CU finished cmd with its I bit set */
+#define STAT_FR         0x40  /* RU finished receiving a frame */
+#define STAT_CNA        0x20  /* CU left active state */
+#define STAT_RNR        0x10  /* RU left ready state */
+
+#define CU_STATUS       0x7   /* CU status, 0=idle */
+#define CU_SUSPEND      0x1   /* CU is suspended */
+#define CU_ACTIVE       0x2   /* CU is active */
+
+#define RU_STATUS      0x70    /* RU status, 0=idle */
+#define RU_SUSPEND     0x10    /* RU suspended */
+#define RU_NOSPACE     0x20    /* RU no resources */
+#define RU_READY       0x40    /* RU is ready */
+
+/*
+ * Receive Frame Descriptor (RFD)
+ */
+struct rfd_struct
+{
+       u8  stat_low;   /* status word */
+       u8  stat_high;  /* status word */
+       u8  rfd_sf;     /* 82596 mode only */
+       u8  last;               /* Bit15,Last Frame on List / Bit14,suspend */
+       u16 next;               /* linkoffset to next RFD */
+       u16 rbd_offset; /* pointeroffset to RBD-buffer */
+       u8  dest[6];    /* ethernet-address, destination */
+       u8  source[6];  /* ethernet-address, source */
+       u16 length;     /* 802.3 frame-length */
+       u16 zero_dummy; /* dummy */
+};
+
+#define RFD_LAST     0x80      /* last: last rfd in the list */
+#define RFD_SUSP     0x40      /* last: suspend RU after  */
+#define RFD_COMPL    0x80
+#define RFD_OK       0x20
+#define RFD_BUSY     0x40
+#define RFD_ERR_LEN  0x10     /* Length error (if enabled length-checking */
+#define RFD_ERR_CRC  0x08     /* CRC error */
+#define RFD_ERR_ALGN 0x04     /* Alignment error */
+#define RFD_ERR_RNR  0x02     /* status: receiver out of resources */
+#define RFD_ERR_OVR  0x01     /* DMA Overrun! */
+
+#define RFD_ERR_FTS  0x0080    /* Frame to short */
+#define RFD_ERR_NEOP 0x0040    /* No EOP flag (for bitstuffing only) */
+#define RFD_ERR_TRUN 0x0020    /* (82596 only/SF mode) indicates truncated frame */
+#define RFD_MATCHADD 0x0002     /* status: Destinationaddress !matches IA (only 82596) */
+#define RFD_COLLDET  0x0001    /* Detected collision during reception */
+
+/*
+ * Receive Buffer Descriptor (RBD)
+ */
+struct rbd_struct
+{
+       u16 status;     /* status word,number of used bytes in buff */
+       u16 next;               /* pointeroffset to next RBD */
+       u32 buffer;     /* receive buffer address pointer */
+       u16 size;               /* size of this buffer */
+       u16 zero_dummy;    /* dummy */
+};
+
+#define RBD_LAST       0x8000  /* last buffer */
+#define RBD_USED       0x4000  /* this buffer has data */
+#define RBD_MASK       0x3fff  /* size-mask for length */
+
+/*
+ * Statusvalues for Commands/RFD
+ */
+#define STAT_COMPL   0x8000    /* status: frame/command is complete */
+#define STAT_BUSY    0x4000    /* status: frame/command is busy */
+#define STAT_OK      0x2000    /* status: frame/command is ok */
+
+/*
+ * Action-Commands
+ */
+#define CMD_NOP                0x0000  /* NOP */
+#define CMD_IASETUP    0x0001  /* initial address setup command */
+#define CMD_CONFIGURE  0x0002  /* configure command */
+#define CMD_MCSETUP    0x0003  /* MC setup command */
+#define CMD_XMIT       0x0004  /* transmit command */
+#define CMD_TDR                0x0005  /* time domain reflectometer (TDR) command */
+#define CMD_DUMP       0x0006  /* dump command */
+#define CMD_DIAGNOSE   0x0007  /* diagnose command */
+
+/*
+ * Action command bits
+ */
+#define CMD_LAST       0x8000  /* indicates last command in the CBL */
+#define CMD_SUSPEND    0x4000  /* suspend CU after this CB */
+#define CMD_INT                0x2000  /* generate interrupt after execution */
+
+/*
+ * NOP - command
+ */
+struct nop_cmd_struct
+{
+       u16 cmd_status; /* status of this command */
+       u16 cmd_cmd;       /* the command itself (+bits) */
+       u16 cmd_link;      /* offsetpointer to next command */
+};
+
+/*
+ * IA Setup command
+ */
+struct iasetup_cmd_struct
+{
+       u16 cmd_status;
+       u16 cmd_cmd;
+       u16 cmd_link;
+       u8  iaddr[6];
+};
+
+/*
+ * Configure command
+ */
+struct configure_cmd_struct
+{
+       u16 cmd_status;
+       u16 cmd_cmd;
+       u16 cmd_link;
+       u8  byte_cnt;   /* size of the config-cmd */
+       u8  fifo;       /* fifo/recv monitor */
+       u8  sav_bf;     /* save bad frames (bit7=1)*/
+       u8  adr_len;    /* adr_len(0-2),al_loc(3),pream(4-5),loopbak(6-7)*/
+       u8  priority;   /* lin_prio(0-2),exp_prio(4-6),bof_metd(7) */
+       u8  ifs;        /* inter frame spacing */
+       u8  time_low;   /* slot time low */
+       u8  time_high;  /* slot time high(0-2) and max. retries(4-7) */
+       u8  promisc;    /* promisc-mode(0) , et al (1-7) */
+       u8  carr_coll;  /* carrier(0-3)/collision(4-7) stuff */
+       u8  fram_len;   /* minimal frame len */
+       u8  dummy;           /* dummy */
+};
+
+/*
+ * Multicast Setup command
+ */
+struct mcsetup_cmd_struct
+{
+       u16 cmd_status;
+       u16 cmd_cmd;
+       u16 cmd_link;
+       u16 mc_cnt;             /* number of bytes in the MC-List */
+       u8  mc_list[0][6];      /* pointer to 6 bytes entries */
+};
+
+/*
+ * DUMP command
+ */
+struct dump_cmd_struct
+{
+       u16 cmd_status;
+       u16 cmd_cmd;
+       u16 cmd_link;
+       u16 dump_offset;    /* pointeroffset to DUMP space */
+};
+
+/*
+ * transmit command
+ */
+struct transmit_cmd_struct
+{
+       u16 cmd_status;
+       u16 cmd_cmd;
+       u16 cmd_link;
+       u16 tbd_offset; /* pointeroffset to TBD */
+       u8  dest[6];       /* destination address of the frame */
+       u16 length;     /* user defined: 802.3 length / Ether type */
+};
+
+#define TCMD_ERRMASK     0x0fa0
+#define TCMD_MAXCOLLMASK 0x000f
+#define TCMD_MAXCOLL     0x0020
+#define TCMD_HEARTBEAT   0x0040
+#define TCMD_DEFERRED    0x0080
+#define TCMD_UNDERRUN    0x0100
+#define TCMD_LOSTCTS     0x0200
+#define TCMD_NOCARRIER   0x0400
+#define TCMD_LATECOLL    0x0800
+
+struct tdr_cmd_struct
+{
+       u16 cmd_status;
+       u16 cmd_cmd;
+       u16 cmd_link;
+       u16 status;
+};
+
+#define TDR_LNK_OK     0x8000  /* No link problem identified */
+#define TDR_XCVR_PRB   0x4000  /* indicates a transceiver problem */
+#define TDR_ET_OPN     0x2000  /* open, no correct termination */
+#define TDR_ET_SRT     0x1000  /* TDR detected a short circuit */
+#define TDR_TIMEMASK   0x07ff  /* mask for the time field */
+
+/*
+ * Transmit Buffer Descriptor (TBD)
+ */
+struct tbd_struct
+{
+       u16 size;               /* size + EOF-Flag(15) */
+       u16 next;          /* pointeroffset to next TBD */
+       u32 buffer;        /* pointer to buffer */
+};
+
+#define TBD_LAST 0x8000         /* EOF-Flag, indicates last buffer in list */
+
+
+
+