/*******************************************************************************
-
- Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the Free
- Software Foundation; either version 2 of the License, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
-
+
You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc., 59
- Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
- The full GNU General Public License is included in this distribution in the
- file called LICENSE.
-
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
*/
#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
-/* Module Parameters are always initialized to -1, so that the driver
- * can tell the difference between no user specified value or the
- * user asking for the default value.
- * The true default values are loaded in when e1000_check_options is called.
- *
- * This is a GCC extension to ANSI C.
- * See the item "Labeled Elements in Initializers" in the section
- * "Extensions to the C Language Family" of the GCC documentation.
- */
-
#define E1000_PARAM(X, desc) \
static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
static int num_##X = 0; \
*
* Default Value: 256
*/
-
E1000_PARAM(TxDescriptors, "Number of transmit descriptors");
/* Receive Descriptor Count
*
* Default Value: 256
*/
-
E1000_PARAM(RxDescriptors, "Number of receive descriptors");
/* User Specified Speed Override
*
* Default Value: 0
*/
-
E1000_PARAM(Speed, "Speed setting");
/* User Specified Duplex Override
*
* Default Value: 0
*/
-
E1000_PARAM(Duplex, "Duplex setting");
/* Auto-negotiation Advertisement Override
*
* Default Value: 0x2F (copper); 0x20 (fiber)
*/
-
E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting");
+#define AUTONEG_ADV_DEFAULT 0x2F
+#define AUTONEG_ADV_MASK 0x2F
/* User Specified Flow Control Override
*
*
* Default Value: Read flow control settings from the EEPROM
*/
-
E1000_PARAM(FlowControl, "Flow Control setting");
+#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
/* XsumRX - Receive Checksum Offload Enable/Disable
*
*
* Default Value: 1
*/
-
E1000_PARAM(XsumRX, "Disable or enable Receive Checksum offload");
/* Transmit Interrupt Delay in units of 1.024 microseconds
+ * Tx interrupt delay needs to typically be set to something non zero
*
* Valid Range: 0-65535
- *
- * Default Value: 64
*/
-
E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
+#define DEFAULT_TIDV 8
+#define MAX_TXDELAY 0xFFFF
+#define MIN_TXDELAY 0
/* Transmit Absolute Interrupt Delay in units of 1.024 microseconds
*
* Valid Range: 0-65535
- *
- * Default Value: 0
*/
-
E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
+#define DEFAULT_TADV 32
+#define MAX_TXABSDELAY 0xFFFF
+#define MIN_TXABSDELAY 0
/* Receive Interrupt Delay in units of 1.024 microseconds
+ * hardware will likely hang if you set this to anything but zero.
*
* Valid Range: 0-65535
- *
- * Default Value: 0
*/
-
E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
+#define DEFAULT_RDTR 0
+#define MAX_RXDELAY 0xFFFF
+#define MIN_RXDELAY 0
/* Receive Absolute Interrupt Delay in units of 1.024 microseconds
*
* Valid Range: 0-65535
- *
- * Default Value: 128
*/
-
E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
+#define DEFAULT_RADV 8
+#define MAX_RXABSDELAY 0xFFFF
+#define MIN_RXABSDELAY 0
/* Interrupt Throttle Rate (interrupts/sec)
*
- * Valid Range: 100-100000 (0=off, 1=dynamic)
- *
- * Default Value: 8000
+ * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
*/
-
E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
+#define DEFAULT_ITR 3
+#define MAX_ITR 100000
+#define MIN_ITR 100
/* Enable Smart Power Down of the PHY
*
*
* Default Value: 0 (disabled)
*/
-
E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
/* Enable Kumeran Lock Loss workaround
*
* Default Value: 1 (enabled)
*/
-
E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
-#define AUTONEG_ADV_DEFAULT 0x2F
-#define AUTONEG_ADV_MASK 0x2F
-#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
-
-#define DEFAULT_RDTR 0
-#define MAX_RXDELAY 0xFFFF
-#define MIN_RXDELAY 0
-
-#define DEFAULT_RADV 128
-#define MAX_RXABSDELAY 0xFFFF
-#define MIN_RXABSDELAY 0
-
-#define DEFAULT_TIDV 64
-#define MAX_TXDELAY 0xFFFF
-#define MIN_TXDELAY 0
-
-#define DEFAULT_TADV 64
-#define MAX_TXABSDELAY 0xFFFF
-#define MIN_TXABSDELAY 0
-
-#define DEFAULT_ITR 8000
-#define MAX_ITR 100000
-#define MIN_ITR 100
-
struct e1000_option {
enum { enable_option, range_option, list_option } type;
char *name;
{ /* Flow Control */
struct e1000_opt_list fc_list[] =
- {{ e1000_fc_none, "Flow Control Disabled" },
- { e1000_fc_rx_pause,"Flow Control Receive Only" },
- { e1000_fc_tx_pause,"Flow Control Transmit Only" },
- { e1000_fc_full, "Flow Control Enabled" },
- { e1000_fc_default, "Flow Control Hardware Default" }};
+ {{ E1000_FC_NONE, "Flow Control Disabled" },
+ { E1000_FC_RX_PAUSE,"Flow Control Receive Only" },
+ { E1000_FC_TX_PAUSE,"Flow Control Transmit Only" },
+ { E1000_FC_FULL, "Flow Control Enabled" },
+ { E1000_FC_DEFAULT, "Flow Control Hardware Default" }};
struct e1000_option opt = {
.type = list_option,
.name = "Flow Control",
.err = "reading default settings from EEPROM",
- .def = e1000_fc_default,
+ .def = E1000_FC_DEFAULT,
.arg = { .l = { .nr = ARRAY_SIZE(fc_list),
.p = fc_list }}
};
break;
case 1:
DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
- opt.name);
+ opt.name);
+ adapter->itr_setting = adapter->itr;
+ adapter->itr = 20000;
+ break;
+ case 3:
+ DPRINTK(PROBE, INFO,
+ "%s set to dynamic conservative mode\n",
+ opt.name);
+ adapter->itr_setting = adapter->itr;
+ adapter->itr = 20000;
break;
default:
e1000_validate_option(&adapter->itr, &opt,
- adapter);
+ adapter);
+ /* save the setting, because the dynamic bits change itr */
+ /* clear the lower two bits because they are
+ * used as control */
+ adapter->itr_setting = adapter->itr & ~3;
break;
}
} else {
- adapter->itr = opt.def;
+ adapter->itr_setting = opt.def;
+ adapter->itr = 20000;
}
}
{ /* Smart Power Down */
git.openpandora.org / pandora-kernel.git / blobdiff