*/
#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
+/* Module Parameters are always initialized to -1, so that the driver
+ * can tell the difference between no user specified value or the
+ * user asking for the default value.
+ * The true default values are loaded in when e1000_check_options is called.
+ *
+ * This is a GCC extension to ANSI C.
+ * See the item "Labeled Elements in Initializers" in the section
+ * "Extensions to the C Language Family" of the GCC documentation.
+ */
+
#define E1000_PARAM(X, desc) \
static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
static int num_##X = 0; \
E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
+/* Enable Smart Power Down of the PHY
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 0 (disabled)
+ */
+
+E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
+
+/* Enable Kumeran Lock Loss workaround
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+
+E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
+
#define AUTONEG_ADV_DEFAULT 0x2F
#define AUTONEG_ADV_MASK 0x2F
#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
if (num_TxIntDelay > bd) {
adapter->tx_int_delay = TxIntDelay[bd];
e1000_validate_option(&adapter->tx_int_delay, &opt,
- adapter);
+ adapter);
} else {
adapter->tx_int_delay = opt.def;
}
if (num_TxAbsIntDelay > bd) {
adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
- adapter);
+ adapter);
} else {
adapter->tx_abs_int_delay = opt.def;
}
if (num_RxIntDelay > bd) {
adapter->rx_int_delay = RxIntDelay[bd];
e1000_validate_option(&adapter->rx_int_delay, &opt,
- adapter);
+ adapter);
} else {
adapter->rx_int_delay = opt.def;
}
if (num_RxAbsIntDelay > bd) {
adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
- adapter);
+ adapter);
} else {
adapter->rx_abs_int_delay = opt.def;
}
switch (adapter->itr) {
case 0:
DPRINTK(PROBE, INFO, "%s turned off\n",
- opt.name);
+ opt.name);
break;
case 1:
DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
- opt.name);
+ opt.name);
break;
default:
e1000_validate_option(&adapter->itr, &opt,
- adapter);
+ adapter);
break;
}
} else {
adapter->itr = opt.def;
}
}
+ { /* Smart Power Down */
+ struct e1000_option opt = {
+ .type = enable_option,
+ .name = "PHY Smart Power Down",
+ .err = "defaulting to Disabled",
+ .def = OPTION_DISABLED
+ };
+
+ if (num_SmartPowerDownEnable > bd) {
+ int spd = SmartPowerDownEnable[bd];
+ e1000_validate_option(&spd, &opt, adapter);
+ adapter->smart_power_down = spd;
+ } else {
+ adapter->smart_power_down = opt.def;
+ }
+ }
+ { /* Kumeran Lock Loss Workaround */
+ struct e1000_option opt = {
+ .type = enable_option,
+ .name = "Kumeran Lock Loss Workaround",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (num_KumeranLockLoss > bd) {
+ int kmrn_lock_loss = KumeranLockLoss[bd];
+ e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
+ adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss;
+ } else {
+ adapter->hw.kmrn_lock_loss_workaround_disabled = !opt.def;
+ }
+ }
switch (adapter->hw.media_type) {
case e1000_media_type_fiber: