[netdrvr] CS89X0: Add cleanup for dma after fail

[pandora-kernel.git] / drivers / net / cs89x0.c

diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 5717509..fba87ab 100644 (file)
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -172,30 +172,30 @@ static char version[] __initdata =
    them to system IRQ numbers. This mapping is card specific and is set to
    the configuration of the Cirrus Eval board for this chip. */
 #ifdef CONFIG_ARCH_CLPS7500
-static unsigned int netcard_portlist[] __initdata =
+static unsigned int netcard_portlist[] __used __initdata =
    { 0x80090303, 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
 static unsigned int cs8900_irq_map[] = {12,0,0,0};
 #elif defined(CONFIG_SH_HICOSH4)
-static unsigned int netcard_portlist[] __initdata =
+static unsigned int netcard_portlist[] __used __initdata =
    { 0x0300, 0};
 static unsigned int cs8900_irq_map[] = {1,0,0,0};
 #elif defined(CONFIG_MACH_IXDP2351)
-static unsigned int netcard_portlist[] __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
+static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
 static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
 #include <asm/irq.h>
 #elif defined(CONFIG_ARCH_IXDP2X01)
 #include <asm/irq.h>
-static unsigned int netcard_portlist[] __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
+static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
 static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
 #elif defined(CONFIG_ARCH_PNX010X)
 #include <asm/irq.h>
 #include <asm/arch/gpio.h>
 #define CIRRUS_DEFAULT_BASE    IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000)      /* = Physical address 0x48200000 */
 #define CIRRUS_DEFAULT_IRQ     VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
-static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0};
+static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0};
 static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0};
 #else
-static unsigned int netcard_portlist[] __initdata =
+static unsigned int netcard_portlist[] __used __initdata =
    { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
 static unsigned int cs8900_irq_map[] = {10,11,12,5};
 #endif
@@ -1394,7 +1394,11 @@ net_open(struct net_device *dev)
 #endif
         if (!result) {
                 printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name);
-        release_irq:
+release_dma:
+#if ALLOW_DMA
+               free_dma(dev->dma);
+#endif
+release_irq:
 #if ALLOW_DMA
                release_dma_buff(lp);
 #endif
@@ -1442,12 +1446,12 @@ net_open(struct net_device *dev)
                        if ((result = detect_bnc(dev)) != DETECTED_NONE)
                                break;
                printk(KERN_ERR "%s: no media detected\n", dev->name);
-                goto release_irq;
+               goto release_dma;
        }
        switch(result) {
        case DETECTED_NONE:
                printk(KERN_ERR "%s: no network cable attached to configured media\n", dev->name);
-                goto release_irq;
+               goto release_dma;
        case DETECTED_RJ45H:
                printk(KERN_INFO "%s: using half-duplex 10Base-T (RJ-45)\n", dev->name);
                break;