#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_NO_VLAN (0x1<<4)
#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST (0x1<<2)
#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_VLAN (0x1<<3)
+#define NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN (0x1<<0)
+#define NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN (0x1<<0)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1<<0)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1<<9)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1<<15)
~ppp_enable.ppp_enable = 0 and pause_enable.pause_enable =0 for the same
port */
#define NIG_REG_LLFC_ENABLE_0 0x16208
+#define NIG_REG_LLFC_ENABLE_1 0x1620c
/* [RW 16] classes are high-priority for port0 */
#define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0 0x16058
+#define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_1 0x1605c
/* [RW 16] classes are low-priority for port0 */
#define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0 0x16060
+#define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_1 0x16064
/* [RW 1] Output enable of message to LLFC BMAC IF for port0 */
#define NIG_REG_LLFC_OUT_EN_0 0x160c8
+#define NIG_REG_LLFC_OUT_EN_1 0x160cc
#define NIG_REG_LLH0_ACPI_PAT_0_CRC 0x1015c
#define NIG_REG_LLH0_ACPI_PAT_6_LEN 0x10154
#define NIG_REG_LLH0_BRB1_DRV_MASK 0x10244
/* [RW 8] event id for llh0 */
#define NIG_REG_LLH0_EVENT_ID 0x10084
#define NIG_REG_LLH0_FUNC_EN 0x160fc
+#define NIG_REG_LLH0_FUNC_MEM 0x16180
+#define NIG_REG_LLH0_FUNC_MEM_ENABLE 0x16140
#define NIG_REG_LLH0_FUNC_VLAN_ID 0x16100
/* [RW 1] Determine the IP version to look for in
~nig_registers_llh0_dest_ip_0.llh0_dest_ip_0. 0 - IPv6; 1-IPv4 */
#define NIG_REG_LLH1_ERROR_MASK 0x10090
/* [RW 8] event id for llh1 */
#define NIG_REG_LLH1_EVENT_ID 0x10088
+#define NIG_REG_LLH1_FUNC_MEM 0x161c0
+#define NIG_REG_LLH1_FUNC_MEM_ENABLE 0x16160
+#define NIG_REG_LLH1_FUNC_MEM_SIZE 16
/* [RW 8] init credit counter for port1 in LLH */
#define NIG_REG_LLH1_XCM_INIT_CREDIT 0x10564
#define NIG_REG_LLH1_XCM_MASK 0x10134
~safc_enable.safc_enable = 0 and ppp_enable.ppp_enable =0 for the same
port */
#define NIG_REG_PAUSE_ENABLE_0 0x160c0
+#define NIG_REG_PAUSE_ENABLE_1 0x160c4
/* [RW 1] Input enable for RX PBF LP IF */
#define NIG_REG_PBF_LB_IN_EN 0x100b4
/* [RW 1] Value of this register will be transmitted to port swap when
~nig_registers_strap_override.strap_override =1 */
#define NIG_REG_PORT_SWAP 0x10394
+/* [RW 1] PPP enable for port0. This register may get 1 only when
+ * ~safc_enable.safc_enable = 0 and pause_enable.pause_enable =0 for the
+ * same port */
+#define NIG_REG_PPP_ENABLE_0 0x160b0
+#define NIG_REG_PPP_ENABLE_1 0x160b4
/* [RW 1] output enable for RX parser descriptor IF */
#define NIG_REG_PRS_EOP_OUT_EN 0x10104
/* [RW 1] Input enable for RX parser request IF */
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G (0x1<<15)
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS (0xf<<18)
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE 18
+/* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter. */
+#define PBF_REG_COS0_UPPER_BOUND 0x15c05c
+/* [RW 31] The weight of COS0 in the ETS command arbiter. */
+#define PBF_REG_COS0_WEIGHT 0x15c054
+/* [RW 31] The upper bound of the weight of COS1 in the ETS command arbiter. */
+#define PBF_REG_COS1_UPPER_BOUND 0x15c060
+/* [RW 31] The weight of COS1 in the ETS command arbiter. */
+#define PBF_REG_COS1_WEIGHT 0x15c058
/* [RW 1] Disable processing further tasks from port 0 (after ending the
current task in process). */
#define PBF_REG_DISABLE_NEW_TASK_PROC_P0 0x14005c
current task in process). */
#define PBF_REG_DISABLE_NEW_TASK_PROC_P4 0x14006c
#define PBF_REG_DISABLE_PF 0x1402e8
+/* [RW 1] Indicates that ETS is performed between the COSes in the command
+ * arbiter. If reset strict priority w/ anti-starvation will be performed
+ * w/o WFQ. */
+#define PBF_REG_ETS_ENABLED 0x15c050
/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
* Ethernet header. */
#define PBF_REG_HDRS_AFTER_BASIC 0x15c0a8
+/* [RW 1] Indicates which COS is conncted to the highest priority in the
+ * command arbiter. */
+#define PBF_REG_HIGH_PRIORITY_COS_NUM 0x15c04c
#define PBF_REG_IF_ENABLE_REG 0x140044
/* [RW 1] Init bit. When set the initial credits are copied to the credit
registers (except the port credits). Should be set and then reset after
#define PBF_REG_MAC_LB_ENABLE 0x140040
/* [RW 6] Bit-map indicating which headers must appear in the packet */
#define PBF_REG_MUST_HAVE_HDRS 0x15c0c4
+/* [RW 16] The number of strict priority arbitration slots between 2 RR
+ * arbitration slots. A value of 0 means no strict priority cycles; i.e. the
+ * strict-priority w/ anti-starvation arbiter is a RR arbiter. */
+#define PBF_REG_NUM_STRICT_ARB_SLOTS 0x15c064
/* [RW 10] Port 0 threshold used by arbiter in 16 byte lines used when pause
not suppoterd. */
#define PBF_REG_P0_ARB_THRSH 0x1400e4
#define EMAC_REG_EMAC_TX_MODE 0xbc
#define EMAC_REG_EMAC_TX_STAT_AC 0x280
#define EMAC_REG_EMAC_TX_STAT_AC_COUNT 22
+#define EMAC_REG_RX_PFC_MODE 0x320
+#define EMAC_REG_RX_PFC_MODE_PRIORITIES (1L<<2)
+#define EMAC_REG_RX_PFC_MODE_RX_EN (1L<<1)
+#define EMAC_REG_RX_PFC_MODE_TX_EN (1L<<0)
+#define EMAC_REG_RX_PFC_PARAM 0x324
+#define EMAC_REG_RX_PFC_PARAM_OPCODE_BITSHIFT 0
+#define EMAC_REG_RX_PFC_PARAM_PRIORITY_EN_BITSHIFT 16
+#define EMAC_REG_RX_PFC_STATS_XOFF_RCVD 0x328
+#define EMAC_REG_RX_PFC_STATS_XOFF_RCVD_COUNT (0xffff<<0)
+#define EMAC_REG_RX_PFC_STATS_XOFF_SENT 0x330
+#define EMAC_REG_RX_PFC_STATS_XOFF_SENT_COUNT (0xffff<<0)
+#define EMAC_REG_RX_PFC_STATS_XON_RCVD 0x32c
+#define EMAC_REG_RX_PFC_STATS_XON_RCVD_COUNT (0xffff<<0)
+#define EMAC_REG_RX_PFC_STATS_XON_SENT 0x334
+#define EMAC_REG_RX_PFC_STATS_XON_SENT_COUNT (0xffff<<0)
#define EMAC_RX_MODE_FLOW_EN (1L<<2)
+#define EMAC_RX_MODE_KEEP_MAC_CONTROL (1L<<3)
#define EMAC_RX_MODE_KEEP_VLAN_TAG (1L<<10)
#define EMAC_RX_MODE_PROMISCUOUS (1L<<8)
#define EMAC_RX_MODE_RESET (1L<<0)
git.openpandora.org / pandora-kernel.git / blobdiff