#include <linux/mtd/partitions.h>
#include <asm/io.h>
-
+#include <asm/fsl_lbc.h>
#define MAX_BANKS 8
#define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */
#define FCM_TIMEOUT_MSECS 500 /* Maximum number of mSecs to wait for FCM */
-struct elbc_bank {
- __be32 br; /**< Base Register */
-#define BR_BA 0xFFFF8000
-#define BR_BA_SHIFT 15
-#define BR_PS 0x00001800
-#define BR_PS_SHIFT 11
-#define BR_PS_8 0x00000800 /* Port Size 8 bit */
-#define BR_PS_16 0x00001000 /* Port Size 16 bit */
-#define BR_PS_32 0x00001800 /* Port Size 32 bit */
-#define BR_DECC 0x00000600
-#define BR_DECC_SHIFT 9
-#define BR_DECC_OFF 0x00000000 /* HW ECC checking and generation off */
-#define BR_DECC_CHK 0x00000200 /* HW ECC checking on, generation off */
-#define BR_DECC_CHK_GEN 0x00000400 /* HW ECC checking and generation on */
-#define BR_WP 0x00000100
-#define BR_WP_SHIFT 8
-#define BR_MSEL 0x000000E0
-#define BR_MSEL_SHIFT 5
-#define BR_MS_GPCM 0x00000000 /* GPCM */
-#define BR_MS_FCM 0x00000020 /* FCM */
-#define BR_MS_SDRAM 0x00000060 /* SDRAM */
-#define BR_MS_UPMA 0x00000080 /* UPMA */
-#define BR_MS_UPMB 0x000000A0 /* UPMB */
-#define BR_MS_UPMC 0x000000C0 /* UPMC */
-#define BR_V 0x00000001
-#define BR_V_SHIFT 0
-#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
-
- __be32 or; /**< Base Register */
-#define OR0 0x5004
-#define OR1 0x500C
-#define OR2 0x5014
-#define OR3 0x501C
-#define OR4 0x5024
-#define OR5 0x502C
-#define OR6 0x5034
-#define OR7 0x503C
-
-#define OR_FCM_AM 0xFFFF8000
-#define OR_FCM_AM_SHIFT 15
-#define OR_FCM_BCTLD 0x00001000
-#define OR_FCM_BCTLD_SHIFT 12
-#define OR_FCM_PGS 0x00000400
-#define OR_FCM_PGS_SHIFT 10
-#define OR_FCM_CSCT 0x00000200
-#define OR_FCM_CSCT_SHIFT 9
-#define OR_FCM_CST 0x00000100
-#define OR_FCM_CST_SHIFT 8
-#define OR_FCM_CHT 0x00000080
-#define OR_FCM_CHT_SHIFT 7
-#define OR_FCM_SCY 0x00000070
-#define OR_FCM_SCY_SHIFT 4
-#define OR_FCM_SCY_1 0x00000010
-#define OR_FCM_SCY_2 0x00000020
-#define OR_FCM_SCY_3 0x00000030
-#define OR_FCM_SCY_4 0x00000040
-#define OR_FCM_SCY_5 0x00000050
-#define OR_FCM_SCY_6 0x00000060
-#define OR_FCM_SCY_7 0x00000070
-#define OR_FCM_RST 0x00000008
-#define OR_FCM_RST_SHIFT 3
-#define OR_FCM_TRLX 0x00000004
-#define OR_FCM_TRLX_SHIFT 2
-#define OR_FCM_EHTR 0x00000002
-#define OR_FCM_EHTR_SHIFT 1
-};
-
-struct elbc_regs {
- struct elbc_bank bank[8];
- u8 res0[0x28];
- __be32 mar; /**< UPM Address Register */
- u8 res1[0x4];
- __be32 mamr; /**< UPMA Mode Register */
- __be32 mbmr; /**< UPMB Mode Register */
- __be32 mcmr; /**< UPMC Mode Register */
- u8 res2[0x8];
- __be32 mrtpr; /**< Memory Refresh Timer Prescaler Register */
- __be32 mdr; /**< UPM Data Register */
- u8 res3[0x4];
- __be32 lsor; /**< Special Operation Initiation Register */
- __be32 lsdmr; /**< SDRAM Mode Register */
- u8 res4[0x8];
- __be32 lurt; /**< UPM Refresh Timer */
- __be32 lsrt; /**< SDRAM Refresh Timer */
- u8 res5[0x8];
- __be32 ltesr; /**< Transfer Error Status Register */
-#define LTESR_BM 0x80000000
-#define LTESR_FCT 0x40000000
-#define LTESR_PAR 0x20000000
-#define LTESR_WP 0x04000000
-#define LTESR_ATMW 0x00800000
-#define LTESR_ATMR 0x00400000
-#define LTESR_CS 0x00080000
-#define LTESR_CC 0x00000001
-#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
- __be32 ltedr; /**< Transfer Error Disable Register */
- __be32 lteir; /**< Transfer Error Interrupt Register */
- __be32 lteatr; /**< Transfer Error Attributes Register */
- __be32 ltear; /**< Transfer Error Address Register */
- u8 res6[0xC];
- __be32 lbcr; /**< Configuration Register */
-#define LBCR_LDIS 0x80000000
-#define LBCR_LDIS_SHIFT 31
-#define LBCR_BCTLC 0x00C00000
-#define LBCR_BCTLC_SHIFT 22
-#define LBCR_AHD 0x00200000
-#define LBCR_LPBSE 0x00020000
-#define LBCR_LPBSE_SHIFT 17
-#define LBCR_EPAR 0x00010000
-#define LBCR_EPAR_SHIFT 16
-#define LBCR_BMT 0x0000FF00
-#define LBCR_BMT_SHIFT 8
-#define LBCR_INIT 0x00040000
- __be32 lcrr; /**< Clock Ratio Register */
-#define LCRR_DBYP 0x80000000
-#define LCRR_DBYP_SHIFT 31
-#define LCRR_BUFCMDC 0x30000000
-#define LCRR_BUFCMDC_SHIFT 28
-#define LCRR_ECL 0x03000000
-#define LCRR_ECL_SHIFT 24
-#define LCRR_EADC 0x00030000
-#define LCRR_EADC_SHIFT 16
-#define LCRR_CLKDIV 0x0000000F
-#define LCRR_CLKDIV_SHIFT 0
- u8 res7[0x8];
- __be32 fmr; /**< Flash Mode Register */
-#define FMR_CWTO 0x0000F000
-#define FMR_CWTO_SHIFT 12
-#define FMR_BOOT 0x00000800
-#define FMR_ECCM 0x00000100
-#define FMR_AL 0x00000030
-#define FMR_AL_SHIFT 4
-#define FMR_OP 0x00000003
-#define FMR_OP_SHIFT 0
- __be32 fir; /**< Flash Instruction Register */
-#define FIR_OP0 0xF0000000
-#define FIR_OP0_SHIFT 28
-#define FIR_OP1 0x0F000000
-#define FIR_OP1_SHIFT 24
-#define FIR_OP2 0x00F00000
-#define FIR_OP2_SHIFT 20
-#define FIR_OP3 0x000F0000
-#define FIR_OP3_SHIFT 16
-#define FIR_OP4 0x0000F000
-#define FIR_OP4_SHIFT 12
-#define FIR_OP5 0x00000F00
-#define FIR_OP5_SHIFT 8
-#define FIR_OP6 0x000000F0
-#define FIR_OP6_SHIFT 4
-#define FIR_OP7 0x0000000F
-#define FIR_OP7_SHIFT 0
-#define FIR_OP_NOP 0x0 /* No operation and end of sequence */
-#define FIR_OP_CA 0x1 /* Issue current column address */
-#define FIR_OP_PA 0x2 /* Issue current block+page address */
-#define FIR_OP_UA 0x3 /* Issue user defined address */
-#define FIR_OP_CM0 0x4 /* Issue command from FCR[CMD0] */
-#define FIR_OP_CM1 0x5 /* Issue command from FCR[CMD1] */
-#define FIR_OP_CM2 0x6 /* Issue command from FCR[CMD2] */
-#define FIR_OP_CM3 0x7 /* Issue command from FCR[CMD3] */
-#define FIR_OP_WB 0x8 /* Write FBCR bytes from FCM buffer */
-#define FIR_OP_WS 0x9 /* Write 1 or 2 bytes from MDR[AS] */
-#define FIR_OP_RB 0xA /* Read FBCR bytes to FCM buffer */
-#define FIR_OP_RS 0xB /* Read 1 or 2 bytes to MDR[AS] */
-#define FIR_OP_CW0 0xC /* Wait then issue FCR[CMD0] */
-#define FIR_OP_CW1 0xD /* Wait then issue FCR[CMD1] */
-#define FIR_OP_RBW 0xE /* Wait then read FBCR bytes */
-#define FIR_OP_RSW 0xE /* Wait then read 1 or 2 bytes */
- __be32 fcr; /**< Flash Command Register */
-#define FCR_CMD0 0xFF000000
-#define FCR_CMD0_SHIFT 24
-#define FCR_CMD1 0x00FF0000
-#define FCR_CMD1_SHIFT 16
-#define FCR_CMD2 0x0000FF00
-#define FCR_CMD2_SHIFT 8
-#define FCR_CMD3 0x000000FF
-#define FCR_CMD3_SHIFT 0
- __be32 fbar; /**< Flash Block Address Register */
-#define FBAR_BLK 0x00FFFFFF
- __be32 fpar; /**< Flash Page Address Register */
-#define FPAR_SP_PI 0x00007C00
-#define FPAR_SP_PI_SHIFT 10
-#define FPAR_SP_MS 0x00000200
-#define FPAR_SP_CI 0x000001FF
-#define FPAR_SP_CI_SHIFT 0
-#define FPAR_LP_PI 0x0003F000
-#define FPAR_LP_PI_SHIFT 12
-#define FPAR_LP_MS 0x00000800
-#define FPAR_LP_CI 0x000007FF
-#define FPAR_LP_CI_SHIFT 0
- __be32 fbcr; /**< Flash Byte Count Register */
-#define FBCR_BC 0x00000FFF
- u8 res11[0x8];
- u8 res8[0xF00];
-};
-
struct fsl_elbc_ctrl;
/* mtd information per set */
/* device info */
struct device *dev;
- struct elbc_regs __iomem *regs;
+ struct fsl_lbc_regs __iomem *regs;
int irq;
wait_queue_head_t irq_wait;
unsigned int irq_status; /* status read from LTESR by irq handler */
.eccbytes = 3,
.eccpos = {6, 7, 8},
.oobfree = { {0, 5}, {9, 7} },
- .oobavail = 12,
};
/* Small Page FLASH with FMR[ECCM] = 1 */
.eccbytes = 3,
.eccpos = {8, 9, 10},
.oobfree = { {0, 5}, {6, 2}, {11, 5} },
- .oobavail = 12,
};
/* Large Page FLASH with FMR[ECCM] = 0 */
.eccbytes = 12,
.eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56},
.oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} },
- .oobavail = 48,
};
/* Large Page FLASH with FMR[ECCM] = 1 */
.eccbytes = 12,
.eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
.oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} },
- .oobavail = 48,
+};
+
+/*
+ * fsl_elbc_oob_lp_eccm* specify that LP NAND's OOB free area starts at offset
+ * 1, so we have to adjust bad block pattern. This pattern should be used for
+ * x8 chips only. So far hardware does not support x16 chips anyway.
+ */
+static u8 scan_ff_pattern[] = { 0xff, };
+
+static struct nand_bbt_descr largepage_memorybased = {
+ .options = 0,
+ .offs = 0,
+ .len = 1,
+ .pattern = scan_ff_pattern,
+};
+
+/*
+ * ELBC may use HW ECC, so that OOB offsets, that NAND core uses for bbt,
+ * interfere with ECC positions, that's why we implement our own descriptors.
+ * OOB {11, 5}, works for both SP and LP chips, with ECCM = 1 and ECCM = 0.
+ */
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+ NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 11,
+ .len = 4,
+ .veroffs = 15,
+ .maxblocks = 4,
+ .pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+ NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 11,
+ .len = 4,
+ .veroffs = 15,
+ .maxblocks = 4,
+ .pattern = mirror_pattern,
};
/*=================================*/
struct nand_chip *chip = mtd->priv;
struct fsl_elbc_mtd *priv = chip->priv;
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
- struct elbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
int buf_num;
ctrl->page = page_addr;
struct nand_chip *chip = mtd->priv;
struct fsl_elbc_mtd *priv = chip->priv;
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
- struct elbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
/* Setup the FMR[OP] to execute without write protection */
out_be32(&lbc->fmr, priv->fmr | 3);
in_be32(&lbc->fbar), in_be32(&lbc->fpar),
in_be32(&lbc->fbcr), priv->bank);
+ ctrl->irq_status = 0;
/* execute special operation */
out_be32(&lbc->lsor, priv->bank);
/* wait for FCM complete flag or timeout */
- ctrl->irq_status = 0;
wait_event_timeout(ctrl->irq_wait, ctrl->irq_status,
FCM_TIMEOUT_MSECS * HZ/1000);
ctrl->status = ctrl->irq_status;
{
struct fsl_elbc_mtd *priv = chip->priv;
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
- struct elbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
if (priv->page_size) {
out_be32(&lbc->fir,
struct nand_chip *chip = mtd->priv;
struct fsl_elbc_mtd *priv = chip->priv;
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
- struct elbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
ctrl->use_mdr = 0;
ctrl->column = column;
ctrl->oob = 0;
- fcr = (NAND_CMD_PAGEPROG << FCR_CMD1_SHIFT) |
- (NAND_CMD_SEQIN << FCR_CMD2_SHIFT);
-
if (priv->page_size) {
+ fcr = (NAND_CMD_SEQIN << FCR_CMD0_SHIFT) |
+ (NAND_CMD_PAGEPROG << FCR_CMD1_SHIFT);
+
out_be32(&lbc->fir,
(FIR_OP_CW0 << FIR_OP0_SHIFT) |
(FIR_OP_CA << FIR_OP1_SHIFT) |
(FIR_OP_PA << FIR_OP2_SHIFT) |
(FIR_OP_WB << FIR_OP3_SHIFT) |
(FIR_OP_CW1 << FIR_OP4_SHIFT));
-
- fcr |= NAND_CMD_READ0 << FCR_CMD0_SHIFT;
} else {
+ fcr = (NAND_CMD_PAGEPROG << FCR_CMD1_SHIFT) |
+ (NAND_CMD_SEQIN << FCR_CMD2_SHIFT);
+
out_be32(&lbc->fir,
(FIR_OP_CW0 << FIR_OP0_SHIFT) |
(FIR_OP_CM2 << FIR_OP1_SHIFT) |
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
unsigned int bufsize = mtd->writesize + mtd->oobsize;
- if (len < 0) {
+ if (len <= 0) {
dev_err(ctrl->dev, "write_buf of %d bytes", len);
ctrl->status = 0;
return;
}
memcpy_toio(&ctrl->addr[ctrl->index], buf, len);
+ /*
+ * This is workaround for the weird elbc hangs during nand write,
+ * Scott Wood says: "...perhaps difference in how long it takes a
+ * write to make it through the localbus compared to a write to IMMR
+ * is causing problems, and sync isn't helping for some reason."
+ * Reading back the last byte helps though.
+ */
+ in_8(&ctrl->addr[ctrl->index] + len - 1);
+
ctrl->index += len;
}
{
struct fsl_elbc_mtd *priv = chip->priv;
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
- struct elbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
if (ctrl->status != LTESR_CC)
return NAND_STATUS_FAIL;
struct nand_chip *chip = mtd->priv;
struct fsl_elbc_mtd *priv = chip->priv;
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
- struct elbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
unsigned int al;
/* calculate FMR Address Length field */
/* adjust Option Register and ECC to match Flash page size */
if (mtd->writesize == 512) {
priv->page_size = 0;
- clrbits32(&lbc->bank[priv->bank].or, ~OR_FCM_PGS);
+ clrbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);
} else if (mtd->writesize == 2048) {
priv->page_size = 1;
setbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);
chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
&fsl_elbc_oob_lp_eccm1 :
&fsl_elbc_oob_lp_eccm0;
- mtd->ecclayout = chip->ecc.layout;
- mtd->oobavail = chip->ecc.layout->oobavail;
+ chip->badblock_pattern = &largepage_memorybased;
}
} else {
dev_err(ctrl->dev,
return -1;
}
- /* The default u-boot configuration on MPC8313ERDB causes errors;
- * more delay is needed. This should be safe for other boards
- * as well.
- */
- setbits32(&lbc->bank[priv->bank].or, 0x70);
return 0;
}
static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
{
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
- struct elbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
struct nand_chip *chip = &priv->chip;
dev_dbg(priv->dev, "eLBC Set Information for bank %d\n", priv->bank);
chip->cmdfunc = fsl_elbc_cmdfunc;
chip->waitfunc = fsl_elbc_wait;
+ chip->bbt_td = &bbt_main_descr;
+ chip->bbt_md = &bbt_mirror_descr;
+
/* set up nand options */
- chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+ chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
+ NAND_USE_FLASH_BBT;
chip->controller = &ctrl->controller;
chip->priv = priv;
nand_release(&priv->mtd);
+ kfree(priv->mtd.name);
+
if (priv->vbase)
iounmap(priv->vbase);
return 0;
}
-static int fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
- struct device_node *node)
+static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
+ struct device_node *node)
{
- struct elbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
struct fsl_elbc_mtd *priv;
struct resource res;
#ifdef CONFIG_MTD_PARTITIONS
goto err;
}
+ priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", (unsigned)res.start);
+ if (!priv->mtd.name) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
ret = fsl_elbc_chip_init(priv);
if (ret)
goto err;
static int __devinit fsl_elbc_ctrl_init(struct fsl_elbc_ctrl *ctrl)
{
- struct elbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
/* clear event registers */
setbits32(&lbc->ltesr, LTESR_NAND_MASK);
return 0;
}
-static int __devexit fsl_elbc_ctrl_remove(struct of_device *ofdev)
+static int fsl_elbc_ctrl_remove(struct of_device *ofdev)
{
struct fsl_elbc_ctrl *ctrl = dev_get_drvdata(&ofdev->dev);
int i;
static irqreturn_t fsl_elbc_ctrl_irq(int irqno, void *data)
{
struct fsl_elbc_ctrl *ctrl = data;
- struct elbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
__be32 status = in_be32(&lbc->ltesr) & LTESR_NAND_MASK;
if (status) {
},
.match_table = fsl_elbc_match,
.probe = fsl_elbc_ctrl_probe,
- .remove = __devexit_p(fsl_elbc_ctrl_remove),
+ .remove = fsl_elbc_ctrl_remove,
};
static int __init fsl_elbc_init(void)
git.openpandora.org / pandora-kernel.git / blobdiff