mtd/nand: s3c6400 support for s3c2410 driver

[pandora-kernel.git] / drivers / mtd / nand / Kconfig

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 2ff8879..1823212 100644 (file)
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -74,6 +74,12 @@ config MTD_NAND_AMS_DELTA
        help
          Support for NAND flash on Amstrad E3 (Delta).
 
+config MTD_NAND_OMAP2
+       tristate "NAND Flash device on OMAP2 and OMAP3"
+       depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3)
+       help
+          Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
+
 config MTD_NAND_TS7250
        tristate "NAND Flash device on TS-7250 board"
        depends on MACH_TS72XX
@@ -139,27 +145,27 @@ config MTD_NAND_PPCHAMELEONEVB
          This enables the NAND flash driver on the PPChameleon EVB Board.
 
 config MTD_NAND_S3C2410
-       tristate "NAND Flash support for S3C2410/S3C2440 SoC"
-       depends on ARCH_S3C2410
+       tristate "NAND Flash support for Samsung S3C SoCs"
+       depends on ARCH_S3C2410 || ARCH_S3C64XX
        help
-         This enables the NAND flash controller on the S3C2410 and S3C2440
+         This enables the NAND flash controller on the S3C24xx and S3C64xx
          SoCs
 
          No board specific support is done by this driver, each board
          must advertise a platform_device for the driver to attach.
 
 config MTD_NAND_S3C2410_DEBUG
-       bool "S3C2410 NAND driver debug"
+       bool "Samsung S3C NAND driver debug"
        depends on MTD_NAND_S3C2410
        help
-         Enable debugging of the S3C2410 NAND driver
+         Enable debugging of the S3C NAND driver
 
 config MTD_NAND_S3C2410_HWECC
-       bool "S3C2410 NAND Hardware ECC"
+       bool "Samsung S3C NAND Hardware ECC"
        depends on MTD_NAND_S3C2410
        help
-         Enable the use of the S3C2410's internal ECC generator when
-         using NAND. Early versions of the chip have had problems with
+         Enable the use of the controller's internal ECC generator when
+         using NAND. Early versions of the chips have had problems with
          incorrect ECC generation, and if using these, the default of
          software ECC is preferable.
 
@@ -171,7 +177,7 @@ config MTD_NAND_NDFC
         NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
 
 config MTD_NAND_S3C2410_CLKSTOP
-       bool "S3C2410 NAND IDLE clock stop"
+       bool "Samsung S3C NAND IDLE clock stop"
        depends on MTD_NAND_S3C2410
        default n
        help
@@ -334,7 +340,7 @@ config MTD_NAND_ATMEL_ECC_NONE
 endchoice
 
 config MTD_NAND_PXA3xx
-       bool "Support for NAND flash devices on PXA3xx"
+       tristate "Support for NAND flash devices on PXA3xx"
        depends on MTD_NAND && PXA3xx
        help
          This enables the driver for the NAND flash device found on
@@ -427,4 +433,23 @@ config MTD_NAND_SH_FLCTL
          Several Renesas SuperH CPU has FLCTL. This option enables support
          for NAND Flash using FLCTL. This driver support SH7723.
 
+config MTD_NAND_DAVINCI
+        tristate "Support NAND on DaVinci SoC"
+        depends on ARCH_DAVINCI
+        help
+         Enable the driver for NAND flash chips on Texas Instruments
+         DaVinci processors.
+
+config MTD_NAND_TXX9NDFMC
+       tristate "NAND Flash support for TXx9 SoC"
+       depends on SOC_TX4938 || SOC_TX4939
+       help
+         This enables the NAND flash controller on the TXx9 SoCs.
+
+config MTD_NAND_SOCRATES
+       tristate "Support for NAND on Socrates board"
+       depends on MTD_NAND && SOCRATES
+       help
+         Enables support for NAND Flash chips wired onto Socrates board.
+
 endif # MTD_NAND