#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/slab.h>
-#include <media/v4l2-chip-ident.h>
+#include <linux/v4l2-mediabus.h>
+
#include <media/soc_camera.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-ctrls.h>
#define to_ov9740(sd) container_of(sd, struct ov9740_priv, subdev)
struct ov9740_priv {
struct v4l2_subdev subdev;
+ struct v4l2_ctrl_handler hdl;
int ident;
u16 model;
V4L2_MBUS_FMT_YUYV8_2X8,
};
-static const struct v4l2_queryctrl ov9740_controls[] = {
- {
- .id = V4L2_CID_VFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Vertically",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- },
- {
- .id = V4L2_CID_HFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Horizontally",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- },
-};
-
/* read a register */
static int ov9740_reg_read(struct i2c_client *client, u16 reg, u8 *val)
{
return ret;
}
-/* Alter bus settings on camera side */
-static int ov9740_set_bus_param(struct soc_camera_device *icd,
- unsigned long flags)
-{
- return 0;
-}
-
-/* Request bus settings on camera side */
-static unsigned long ov9740_query_bus_param(struct soc_camera_device *icd)
-{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
-
- unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
- SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
- SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATAWIDTH_8;
-
- return soc_camera_apply_sensor_flags(icl, flags);
-}
-
/* select nearest higher resolution for capture */
static void ov9740_res_roundup(u32 *width, u32 *height)
{
return 0;
}
-/* Get status of additional camera capabilities */
-static int ov9740_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct ov9740_priv *priv = to_ov9740(sd);
-
- switch (ctrl->id) {
- case V4L2_CID_VFLIP:
- ctrl->value = priv->flag_vflip;
- break;
- case V4L2_CID_HFLIP:
- ctrl->value = priv->flag_hflip;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
/* Set status of additional camera capabilities */
-static int ov9740_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int ov9740_s_ctrl(struct v4l2_ctrl *ctrl)
{
- struct ov9740_priv *priv = to_ov9740(sd);
+ struct ov9740_priv *priv =
+ container_of(ctrl->handler, struct ov9740_priv, hdl);
switch (ctrl->id) {
case V4L2_CID_VFLIP:
- priv->flag_vflip = ctrl->value;
+ priv->flag_vflip = ctrl->val;
break;
case V4L2_CID_HFLIP:
- priv->flag_hflip = ctrl->value;
+ priv->flag_hflip = ctrl->val;
break;
default:
return -EINVAL;
}
#endif
-static int ov9740_video_probe(struct soc_camera_device *icd,
- struct i2c_client *client)
+static int ov9740_video_probe(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct ov9740_priv *priv = to_ov9740(sd);
u8 modelhi, modello;
int ret;
- /* We must have a parent by now. And it cannot be a wrong one. */
- BUG_ON(!icd->parent ||
- to_soc_camera_host(icd->parent)->nr != icd->iface);
-
/*
* check and show product ID and manufacturer ID
*/
return ret;
}
-static struct soc_camera_ops ov9740_ops = {
- .set_bus_param = ov9740_set_bus_param,
- .query_bus_param = ov9740_query_bus_param,
- .controls = ov9740_controls,
- .num_controls = ARRAY_SIZE(ov9740_controls),
-};
+/* Request bus settings on camera side */
+static int ov9740_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+ cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+ V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+ V4L2_MBUS_DATA_ACTIVE_HIGH;
+ cfg->type = V4L2_MBUS_PARALLEL;
+ cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+ return 0;
+}
static struct v4l2_subdev_video_ops ov9740_video_ops = {
- .s_stream = ov9740_s_stream,
- .s_mbus_fmt = ov9740_s_fmt,
- .try_mbus_fmt = ov9740_try_fmt,
- .enum_mbus_fmt = ov9740_enum_fmt,
- .cropcap = ov9740_cropcap,
- .g_crop = ov9740_g_crop,
+ .s_stream = ov9740_s_stream,
+ .s_mbus_fmt = ov9740_s_fmt,
+ .try_mbus_fmt = ov9740_try_fmt,
+ .enum_mbus_fmt = ov9740_enum_fmt,
+ .cropcap = ov9740_cropcap,
+ .g_crop = ov9740_g_crop,
+ .g_mbus_config = ov9740_g_mbus_config,
};
static struct v4l2_subdev_core_ops ov9740_core_ops = {
- .g_ctrl = ov9740_g_ctrl,
- .s_ctrl = ov9740_s_ctrl,
.g_chip_ident = ov9740_g_chip_ident,
.s_power = ov9740_s_power,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.video = &ov9740_video_ops,
};
+static const struct v4l2_ctrl_ops ov9740_ctrl_ops = {
+ .s_ctrl = ov9740_s_ctrl,
+};
+
/*
* i2c_driver function
*/
const struct i2c_device_id *did)
{
struct ov9740_priv *priv;
- struct soc_camera_device *icd = client->dev.platform_data;
- struct soc_camera_link *icl;
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
int ret;
- if (!icd) {
- dev_err(&client->dev, "Missing soc-camera data!\n");
- return -EINVAL;
- }
-
- icl = to_soc_camera_link(icd);
if (!icl) {
dev_err(&client->dev, "Missing platform_data for driver\n");
return -EINVAL;
}
v4l2_i2c_subdev_init(&priv->subdev, client, &ov9740_subdev_ops);
+ v4l2_ctrl_handler_init(&priv->hdl, 13);
+ v4l2_ctrl_new_std(&priv->hdl, &ov9740_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&priv->hdl, &ov9740_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ priv->subdev.ctrl_handler = &priv->hdl;
+ if (priv->hdl.error) {
+ int err = priv->hdl.error;
- icd->ops = &ov9740_ops;
+ kfree(priv);
+ return err;
+ }
- ret = ov9740_video_probe(icd, client);
+ ret = ov9740_video_probe(client);
+ if (!ret)
+ ret = v4l2_ctrl_handler_setup(&priv->hdl);
if (ret < 0) {
- icd->ops = NULL;
+ v4l2_ctrl_handler_free(&priv->hdl);
kfree(priv);
}
{
struct ov9740_priv *priv = i2c_get_clientdata(client);
+ v4l2_device_unregister_subdev(&priv->subdev);
+ v4l2_ctrl_handler_free(&priv->hdl);
kfree(priv);
-
return 0;
}
git.openpandora.org / pandora-kernel.git / blobdiff