#include "em28xx.h"
+#define DRIVER_NAME "em28xx"
+
static int tuner = -1;
module_param(tuner, int, 0444);
MODULE_PARM_DESC(tuner, "tuner type");
module_param(disable_ir, int, 0444);
MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
+static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
+module_param_array(card, int, NULL, 0444);
+MODULE_PARM_DESC(card, "card type");
+
+/* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
+static unsigned long em28xx_devused;
+
struct em28xx_hash_table {
unsigned long hash;
unsigned int model;
unsigned int tuner;
};
+/*
+ * Reset sequences for analog/digital modes
+ */
+
+/* Reset for the most [analog] boards */
+static struct em28xx_reg_seq default_analog[] = {
+ {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Reset for the most [digital] boards */
+static struct em28xx_reg_seq default_digital[] = {
+ {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Board Hauppauge WinTV HVR 900 analog */
+static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
+ {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10},
+ {0x05, 0xff, 0x10, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Board Hauppauge WinTV HVR 900 digital */
+static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
+ {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
+ {EM2880_R04_GPO, 0x04, 0x0f, 10},
+ {EM2880_R04_GPO, 0x0c, 0x0f, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
+static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
+ {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
+
+/* Board - EM2870 Kworld 355u
+ Analog - No input analog */
+
+/* Callback for the most boards */
+static struct em28xx_reg_seq default_tuner_gpio[] = {
+ {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
+ {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10},
+ {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Pinnacle PCTV HD Mini (80e) GPIOs
+ 0-5: not used
+ 6: demod reset, active low
+ 7: LED on, active high */
+static struct em28xx_reg_seq em2874_pinnacle_80e_digital[] = {
+ {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/
+ {EM2874_R80_GPIO, 0x80, 0xff, 100},/*Demod reset*/
+ {EM2874_R80_GPIO, 0xc0, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+/*
+ * Board definitions
+ */
struct em28xx_board em28xx_boards[] = {
[EM2750_BOARD_UNKNOWN] = {
.name = "Unknown EM2750/EM2751 webcam grabber",
- .vchannels = 1,
+ .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
+ .tuner_type = TUNER_ABSENT, /* This is a webcam */
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
} },
},
[EM2800_BOARD_UNKNOWN] = {
.name = "Unknown EM2800 video grabber",
.is_em2800 = 1,
- .vchannels = 2,
.tda9887_conf = TDA9887_PRESENT,
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .decoder = EM28XX_SAA711X,
+ .tuner_type = TUNER_ABSENT,
+ .input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_UNKNOWN] = {
- .name = "Unknown EM2750/28xx video grabber",
- .is_em2800 = 0,
- .tuner_type = TUNER_ABSENT,
+ .name = "Unknown EM2750/28xx video grabber",
+ .tuner_type = TUNER_ABSENT,
},
[EM2750_BOARD_DLCW_130] = {
/* Beijing Huaqi Information Digital Technology Co., Ltd */
.name = "Huaqi DLCW-130",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 1,
+ .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
+ .tuner_type = TUNER_ABSENT, /* This is a webcam */
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
} },
},
[EM2820_BOARD_KWORLD_PVRTV2800RF] = {
.name = "Kworld PVR TV 2800 RF",
- .is_em2800 = 0,
- .vchannels = 2,
.tuner_type = TUNER_TEMIC_PAL,
.tda9887_conf = TDA9887_PRESENT,
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .decoder = EM28XX_SAA711X,
+ .input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_TERRATEC_CINERGY_250] = {
.name = "Terratec Cinergy 250 USB",
- .vchannels = 3,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .decoder = EM28XX_SAA711X,
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_PINNACLE_USB_2] = {
.name = "Pinnacle PCTV USB 2",
- .vchannels = 3,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .decoder = EM28XX_SAA711X,
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
.name = "Hauppauge WinTV USB 2",
- .vchannels = 3,
.tuner_type = TUNER_PHILIPS_FM1236_MK3,
.tda9887_conf = TDA9887_PRESENT |
TDA9887_PORT1_ACTIVE|
TDA9887_PORT2_ACTIVE,
.decoder = EM28XX_TVP5150,
.has_msp34xx = 1,
- /*FIXME: S-Video not tested */
- .input = { {
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = MSP_INPUT_DEFAULT,
[EM2820_BOARD_DLINK_USB_TV] = {
.name = "D-Link DUB-T210 TV Tuner",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
- .is_em2800 = 0,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .decoder = EM28XX_SAA711X,
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
.name = "Hercules Smart TV USB 2.0",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
- .decoder = EM28XX_SAA7113,
+ .decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
.name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
- .is_em2800 = 0,
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
.tda9887_conf = TDA9887_PRESENT,
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .decoder = EM28XX_SAA711X,
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_GADMEI_UTV310] = {
.name = "Gadmei UTV310",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
.tuner_type = TUNER_TNF_5335MF,
.tda9887_conf = TDA9887_PRESENT,
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .decoder = EM28XX_SAA711X,
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
.name = "Leadtek Winfast USB II Deluxe",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
.tda9887_conf = TDA9887_PRESENT,
- .decoder = EM28XX_SAA7114,
- .input = { {
+ .decoder = EM28XX_SAA711X,
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
- .vmux = 2,
- .amux = 0,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
- .vmux = 0,
- .amux = 1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
- .vmux = 9,
- .amux = 1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_PINNACLE_DVC_100] = {
.name = "Pinnacle Dazzle DVC 100",
- .valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .decoder = EM28XX_SAA711X,
+ .tuner_type = TUNER_ABSENT, /* Capture only device */
+ .input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
- .name = "Videology 20K14XUSB USB2.0",
+ .name = "Videology 20K14XUSB USB2.0",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 1,
- .input = { {
+ .tuner_type = TUNER_ABSENT, /* This is a webcam */
+ .input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
} },
},
[EM2821_BOARD_PROLINK_PLAYTV_USB2] = {
.name = "SIIG AVTuner-PVR/Prolink PlayTV USB 2.0",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
- .is_em2800 = 0,
.tuner_type = TUNER_LG_PAL_NEW_TAPC, /* unknown? */
.tda9887_conf = TDA9887_PRESENT, /* unknown? */
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .decoder = EM28XX_SAA711X,
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2821_BOARD_SUPERCOMP_USB_2] = {
.name = "Supercomp USB 2.0 TV",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
- .is_em2800 = 0,
.tuner_type = TUNER_PHILIPS_FM1236_MK3,
.tda9887_conf = TDA9887_PRESENT |
TDA9887_PORT1_ACTIVE |
TDA9887_PORT2_ACTIVE,
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .decoder = EM28XX_SAA711X,
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2821_BOARD_USBGEAR_VD204] = {
- .name = "Usbgear VD204v9",
+ .name = "Usbgear VD204v9",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 2,
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .tuner_type = TUNER_ABSENT, /* Capture only device */
+ .decoder = EM28XX_SAA711X,
+ .input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2860_BOARD_NETGMBH_CAM] = {
/* Beijing Huaqi Information Digital Technology Co., Ltd */
- .name = "NetGMBH Cam",
- .valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 1,
- .input = { {
+ .name = "NetGMBH Cam",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_ABSENT, /* This is a webcam */
+ .input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
} },
},
[EM2860_BOARD_TYPHOON_DVD_MAKER] = {
- .name = "Typhoon DVD Maker",
- .valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 2,
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .name = "Typhoon DVD Maker",
+ .decoder = EM28XX_SAA711X,
+ .tuner_type = TUNER_ABSENT, /* Capture only device */
+ .input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2860_BOARD_GADMEI_UTV330] = {
.name = "Gadmei UTV330",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
.tuner_type = TUNER_TNF_5335MF,
.tda9887_conf = TDA9887_PRESENT,
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .decoder = EM28XX_SAA711X,
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2860_BOARD_TERRATEC_HYBRID_XS] = {
.name = "Terratec Cinergy A Hybrid XS",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
- .input = { {
+
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2861_BOARD_KWORLD_PVRTV_300U] = {
.name = "KWorld PVRTV 300U",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
- .input = { {
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
.name = "Yakumo MovieMixer",
- .valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 1,
+ .tuner_type = TUNER_ABSENT, /* Capture only device */
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2861_BOARD_PLEXTOR_PX_TV100U] = {
.name = "Plextor ConvertX PX-TV100U",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
.tuner_type = TUNER_TNF_5335MF,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_TVP5150,
- .input = { {
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
+
+ /* Those boards with em2870 are DVB Only*/
+
[EM2870_BOARD_TERRATEC_XS] = {
.name = "Terratec Cinergy T XS",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
},
[EM2870_BOARD_TERRATEC_XS_MT2060] = {
.name = "Terratec Cinergy T XS (MT2060)",
.name = "Kworld 350 U DVB-T",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
},
[EM2870_BOARD_KWORLD_355U] = {
.name = "Kworld 355 U DVB-T",
.name = "Pinnacle PCTV DVB-T",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_ABSENT, /* MT2060 */
+ /* djh - I have serious doubts this is right... */
+ .xclk = EM28XX_XCLK_IR_RC5_MODE |
+ EM28XX_XCLK_FREQUENCY_10MHZ,
},
[EM2870_BOARD_COMPRO_VIDEOMATE] = {
.name = "Compro, VideoMate U3",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_ABSENT, /* MT2060 */
},
+
[EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
.name = "Terratec Hybrid XS Secam",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
.has_msp34xx = 1,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
- .input = { {
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = default_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = default_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = default_analog,
} },
},
[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
.name = "Hauppauge WinTV HVR 900",
- .vchannels = 3,
.tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
- .has_dvb = 1,
+ .has_dvb = 1,
+ .dvb_gpio = hauppauge_wintv_hvr_900_digital,
.decoder = EM28XX_TVP5150,
- .input = { {
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
.name = "Hauppauge WinTV HVR 900 (R2)",
- .vchannels = 3,
.tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
.decoder = EM28XX_TVP5150,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
+ } },
+ },
+ [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
+ .name = "Hauppauge WinTV HVR 850",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .mts_firmware = 1,
+ .has_dvb = 1,
+ .dvb_gpio = hauppauge_wintv_hvr_900_digital,
+ .ir_codes = ir_codes_hauppauge_new,
+ .decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
.name = "Hauppauge WinTV HVR 950",
- .vchannels = 3,
- .tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
- .has_12mhz_i2s = 1,
.has_dvb = 1,
+ .dvb_gpio = hauppauge_wintv_hvr_900_digital,
+ .ir_codes = ir_codes_hauppauge_new,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
.name = "Pinnacle PCTV HD Pro Stick",
- .vchannels = 3,
- .tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
- .has_12mhz_i2s = 1,
.has_dvb = 1,
+ .dvb_gpio = hauppauge_wintv_hvr_900_digital,
+ .ir_codes = ir_codes_pinnacle_pctv_hd,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
.name = "AMD ATI TV Wonder HD 600",
- .vchannels = 3,
- .tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
- .has_12mhz_i2s = 1,
.has_dvb = 1,
+ .dvb_gpio = hauppauge_wintv_hvr_900_digital,
+ .ir_codes = ir_codes_ati_tv_wonder_hd_600,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2880_BOARD_TERRATEC_HYBRID_XS] = {
- .name = "Terratec Hybrid XS",
- .vchannels = 3,
- .tda9887_conf = TDA9887_PRESENT,
- .tuner_type = TUNER_XC2028,
- .decoder = EM28XX_TVP5150,
+ .name = "Terratec Hybrid XS",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .decoder = EM28XX_TVP5150,
.has_dvb = 1,
+ .dvb_gpio = default_analog,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = default_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = default_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = default_analog,
} },
},
/* maybe there's a reason behind it why Terratec sells the Hybrid XS
maybe we'll need it lateron */
[EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
.name = "Terratec Prodigy XS",
- .vchannels = 3,
- .tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
- .input = { {
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2820_BOARD_MSI_VOX_USB_2] = {
.name = "MSI VOX USB 2.0",
- .vchannels = 3,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT |
TDA9887_PORT1_ACTIVE |
TDA9887_PORT2_ACTIVE,
.max_range_640_480 = 1,
-
- .decoder = EM28XX_SAA7114,
+ .decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE4,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2800_BOARD_TERRATEC_CINERGY_200] = {
.name = "Terratec Cinergy 200 USB",
.is_em2800 = 1,
- .vchannels = 3,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .decoder = EM28XX_SAA711X,
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2800_BOARD_GRABBEEX_USB2800] = {
.name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
.is_em2800 = 1,
- .vchannels = 2,
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .decoder = EM28XX_SAA711X,
+ .tuner_type = TUNER_ABSENT, /* capture only board */
+ .input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
.name = "Leadtek Winfast USB II",
.is_em2800 = 1,
- .vchannels = 3,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .decoder = EM28XX_SAA711X,
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2800_BOARD_KWORLD_USB2800] = {
.name = "Kworld USB2800",
.is_em2800 = 1,
- .vchannels = 3,
.tuner_type = TUNER_PHILIPS_FCV1236D,
.tda9887_conf = TDA9887_PRESENT,
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .decoder = EM28XX_SAA711X,
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_PINNACLE_DVC_90] = {
.name = "Pinnacle Dazzle DVC 90/DVC 100",
- .vchannels = 3,
- .tuner_type = TUNER_ABSENT,
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .tuner_type = TUNER_ABSENT, /* capture only board */
+ .decoder = EM28XX_SAA711X,
+ .input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2800_BOARD_VGEAR_POCKETTV] = {
.name = "V-Gear PocketTV",
.is_em2800 = 1,
- .vchannels = 3,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .decoder = EM28XX_SAA711X,
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
- [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
- .name = "Pixelview Prolink PlayTV USB 2.0",
- .vchannels = 3,
+ [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
+ .name = "Pixelview PlayTV Box 4 USB 2.0",
.tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_YMEC_TVF_5533MF,
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .decoder = EM28XX_SAA711X,
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
- .amux = EM28XX_AMUX_LINE_IN,
+ .amux = EM28XX_AMUX_VIDEO,
+ .aout = EM28XX_AOUT_MONO | /* I2S */
+ EM28XX_AOUT_MASTER, /* Line out pin */
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
- [EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA] = {
- .name = "PointNix Intra-Oral Camera",
+ [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
+ .name = "Pixelview Prolink PlayTV USB 2.0",
.has_snapshot_button = 1,
- .vchannels = 1,
.tda9887_conf = TDA9887_PRESENT,
- .tuner_type = TUNER_ABSENT,
- .decoder = EM28XX_SAA7113,
- .input = { {
+ .tuner_type = TUNER_YMEC_TVF_5533MF,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_VIDEO,
+ .aout = EM28XX_AOUT_MONO | /* I2S */
+ EM28XX_AOUT_MASTER, /* Line out pin */
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+ },
+ [EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA] = {
+ .name = "PointNix Intra-Oral Camera",
+ .has_snapshot_button = 1,
+ .tda9887_conf = TDA9887_PRESENT,
+ .tuner_type = TUNER_ABSENT,
+ .decoder = EM28XX_SAA711X,
+ .input = { {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
} },
},
[EM2880_BOARD_MSI_DIGIVOX_AD] = {
.name = "MSI DigiVox A/D",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
- .input = { {
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = em2880_msi_digivox_ad_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = em2880_msi_digivox_ad_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = em2880_msi_digivox_ad_analog,
} },
},
[EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
.name = "MSI DigiVox A/D II",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
- .input = { {
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = em2880_msi_digivox_ad_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = em2880_msi_digivox_ad_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = em2880_msi_digivox_ad_analog,
} },
},
[EM2880_BOARD_KWORLD_DVB_305U] = {
.name = "KWorld DVB-T 305U",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
- .input = { {
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2880_BOARD_KWORLD_DVB_310U] = {
.name = "KWorld DVB-T 310U",
- .vchannels = 3,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
.has_dvb = 1,
+ .dvb_gpio = default_digital,
.mts_firmware = 1,
.decoder = EM28XX_TVP5150,
- .input = { {
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
+ .gpio = default_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = EM28XX_AMUX_AC97_LINE_IN,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = default_analog,
}, { /* S-video has not been tested yet */
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = EM28XX_AMUX_AC97_LINE_IN,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = default_analog,
} },
},
[EM2881_BOARD_DNT_DA2_HYBRID] = {
.name = "DNT DA2 Hybrid",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
- .input = { {
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = default_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = default_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = default_analog,
} },
},
[EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
.name = "Pinnacle Hybrid Pro",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
- .input = { {
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = default_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = default_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = default_analog,
} },
},
[EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
.name = "Pinnacle Hybrid Pro (2)",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
.decoder = EM28XX_TVP5150,
- .input = { {
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2882_BOARD_KWORLD_VS_DVBT] = {
.name = "Kworld VS-DVB-T 323UR",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
- .input = { {
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2882_BOARD_TERRATEC_HYBRID_XS] = {
.name = "Terratec Hybrid XS (em2882)",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
- .input = { {
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2883_BOARD_KWORLD_HYBRID_A316] = {
.name = "Kworld PlusTV HD Hybrid 330",
- .valid = EM28XX_BOARD_NOT_VALIDATED,
- .vchannels = 3,
- .is_em2800 = 0,
.tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
- .input = { {
+ .mts_firmware = 1,
+ .has_dvb = 1,
+ .dvb_gpio = default_digital,
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
- .amux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = default_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = 1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
.name = "Compro VideoMate ForYou/Stereo",
- .vchannels = 2,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_TVP5150,
- .input = { {
+ .input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
+
+ /* em2874 tuners are DVB only */
+
+ [EM2874_BOARD_PINNACLE_PCTV_80E] = {
+ .name = "Pinnacle PCTV HD Mini",
+ .tuner_type = TUNER_ABSENT,
+ .has_dvb = 1,
+ .dvb_gpio = em2874_pinnacle_80e_digital,
+ .ir_codes = ir_codes_pinnacle_pctv_hd,
+ .decoder = EM28XX_NODECODER,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM2874_I2C_SECONDARY_BUS_SELECT |
+ EM28XX_I2C_FREQ_400_KHZ,
+#ifdef DJH_DEBUG
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+#endif
+ },
};
const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
{ USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
- { USB_DEVICE(0x2040, 0x651f), /* HCW HVR-850 */
- .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
+ { USB_DEVICE(0x2040, 0x651f),
+ .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
{ USB_DEVICE(0x0438, 0xb002),
.driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
{ USB_DEVICE(0x2001, 0xf112),
.driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
{ USB_DEVICE(0x2304, 0x0227),
.driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
+ { USB_DEVICE(0x2304, 0x023f),
+ .driver_info = EM2874_BOARD_PINNACLE_PCTV_80E },
{ USB_DEVICE(0x0413, 0x6023),
.driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
{ USB_DEVICE(0x093b, 0xa005),
};
MODULE_DEVICE_TABLE(usb, em28xx_id_table);
-/*
- * Reset sequences for analog/digital modes
- */
-
-/* Reset for the most [analog] boards */
-static struct em28xx_reg_seq default_analog[] = {
- {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
- { -1, -1, -1, -1},
-};
-
-/* Reset for the most [digital] boards */
-static struct em28xx_reg_seq default_digital[] = {
- {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
- { -1, -1, -1, -1},
-};
-
-/* Board Hauppauge WinTV HVR 900 analog */
-static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
- {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10},
- {0x05, 0xff, 0x10, 10},
- { -1, -1, -1, -1},
-};
-
-/* Board Hauppauge WinTV HVR 900 digital */
-static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
- {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
- {EM2880_R04_GPO, 0x04, 0x0f, 10},
- {EM2880_R04_GPO, 0x0c, 0x0f, 10},
- { -1, -1, -1, -1},
-};
-
-/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
-static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
- {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10},
- { -1, -1, -1, -1},
-};
-
-/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
-static struct em28xx_reg_seq em2880_msi_digivox_ad_digital[] = {
- {EM28XX_R08_GPIO, 0x6a, ~EM_GPIO_4, 10},
- { -1, -1, -1, -1},
-};
-
-/* Board - EM2870 Kworld 355u
- Analog - No input analog */
-static struct em28xx_reg_seq em2870_kworld_355u_digital[] = {
- {EM2880_R04_GPO, 0x01, 0xff, 10},
- { -1, -1, -1, -1},
-};
-
-/* Callback for the most boards */
-static struct em28xx_reg_seq default_callback[] = {
- {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
- {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10},
- {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
- { -1, -1, -1, -1},
-};
-
-/* Callback for EM2882 TERRATEC HYBRID XS */
-static struct em28xx_reg_seq em2882_terratec_hybrid_xs_digital[] = {
- {EM28XX_R08_GPIO, 0x2e, 0xff, 6},
- {EM28XX_R08_GPIO, 0x3e, ~EM_GPIO_4, 6},
- {EM2880_R04_GPO, 0x04, 0xff, 10},
- {EM2880_R04_GPO, 0x0c, 0xff, 10},
- { -1, -1, -1, -1},
-};
-
/*
* EEPROM hash table for devices with generic USB IDs
*/
static struct em28xx_hash_table em28xx_eeprom_hash [] = {
/* P/N: SA 60002070465 Tuner: TVF7533-MF */
{0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
+ {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
{0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
};
{0x1ba50080, EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA, TUNER_ABSENT},
};
-int em28xx_tuner_callback(void *ptr, int command, int arg)
+int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
{
int rc = 0;
struct em28xx *dev = ptr;
if (command != XC2028_TUNER_RESET)
return 0;
- if (dev->mode == EM28XX_ANALOG_MODE)
- rc = em28xx_gpio_set(dev, dev->tun_analog_gpio);
- else
- rc = em28xx_gpio_set(dev, dev->tun_digital_gpio);
+ rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
return rc;
}
EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
-static void em28xx_set_model(struct em28xx *dev)
+static void inline em28xx_set_model(struct em28xx *dev)
{
- dev->is_em2800 = em28xx_boards[dev->model].is_em2800;
- dev->has_msp34xx = em28xx_boards[dev->model].has_msp34xx;
- dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
- dev->decoder = em28xx_boards[dev->model].decoder;
- dev->video_inputs = em28xx_boards[dev->model].vchannels;
- dev->has_12mhz_i2s = em28xx_boards[dev->model].has_12mhz_i2s;
- dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480;
- dev->has_dvb = em28xx_boards[dev->model].has_dvb;
- dev->has_snapshot_button = em28xx_boards[dev->model].has_snapshot_button;
- dev->valid = em28xx_boards[dev->model].valid;
+ memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
}
/* Since em28xx_pre_card_setup() requires a proper dev->model,
{
int rc;
- rc = em28xx_read_reg(dev, EM2880_R04_GPO);
- if (rc >= 0)
- dev->reg_gpo = rc;
+ em28xx_set_model(dev);
+
+ em28xx_info("Identified as %s (card=%d)\n",
+ dev->board.name, dev->model);
+
+ /* Set the default GPO/GPIO for legacy devices */
+ dev->reg_gpo_num = EM2880_R04_GPO;
+ dev->reg_gpio_num = EM28XX_R08_GPIO;
dev->wait_after_write = 5;
+
+ /* Based on the Chip ID, set the device configuration */
rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
if (rc > 0) {
- switch (rc) {
+ dev->chip_id = rc;
+
+ switch (dev->chip_id) {
+ case CHIP_ID_EM2750:
+ em28xx_info("chip ID is em2750\n");
+ break;
+ case CHIP_ID_EM2820:
+ em28xx_info("chip ID is em2820\n");
+ break;
+ case CHIP_ID_EM2840:
+ em28xx_info("chip ID is em2840\n");
+ break;
case CHIP_ID_EM2860:
em28xx_info("chip ID is em2860\n");
break;
+ case CHIP_ID_EM2870:
+ em28xx_info("chip ID is em2870\n");
+ dev->wait_after_write = 0;
+ break;
+ case CHIP_ID_EM2874:
+ em28xx_info("chip ID is em2874\n");
+ dev->reg_gpio_num = EM2874_R80_GPIO;
+ dev->wait_after_write = 0;
+ break;
case CHIP_ID_EM2883:
em28xx_info("chip ID is em2882/em2883\n");
dev->wait_after_write = 0;
break;
default:
- em28xx_info("em28xx chip ID = %d\n", rc);
+ em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
}
}
- em28xx_set_model(dev);
-
- /* request some modules */
- switch (dev->model) {
- case EM2880_BOARD_TERRATEC_PRODIGY_XS:
- case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
- case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
- case EM2860_BOARD_TERRATEC_HYBRID_XS:
- case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
- case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
- case EM2882_BOARD_PINNACLE_HYBRID_PRO:
- case EM2883_BOARD_KWORLD_HYBRID_A316:
- case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
- em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
- em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
- msleep(50);
-
- /* Sets GPO/GPIO sequences for this device */
- dev->analog_gpio = hauppauge_wintv_hvr_900_analog;
- dev->digital_gpio = hauppauge_wintv_hvr_900_digital;
- dev->tun_analog_gpio = default_callback;
- dev->tun_digital_gpio = default_callback;
- break;
- case EM2882_BOARD_TERRATEC_HYBRID_XS:
- em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
- em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
- msleep(50);
-
- /* should be added ir_codes here */
+ /* Prepopulate cached GPO register content */
+ rc = em28xx_read_reg(dev, dev->reg_gpo_num);
+ if (rc >= 0)
+ dev->reg_gpo = rc;
- /* Sets GPO/GPIO sequences for this device */
- dev->analog_gpio = hauppauge_wintv_hvr_900_analog;
- dev->digital_gpio = hauppauge_wintv_hvr_900_digital;
- dev->tun_analog_gpio = default_callback;
- dev->tun_digital_gpio = em2882_terratec_hybrid_xs_digital;
- break;
+ /* Those are the default values for the majority of boards
+ Use those values if not specified otherwise at boards entry
+ */
+ if (!dev->board.xclk)
+ dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
+ EM28XX_XCLK_FREQUENCY_12MHZ;
- case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
- case EM2880_BOARD_TERRATEC_HYBRID_XS:
- case EM2870_BOARD_TERRATEC_XS:
- case EM2881_BOARD_PINNACLE_HYBRID_PRO:
- case EM2880_BOARD_KWORLD_DVB_310U:
- case EM2870_BOARD_KWORLD_350U:
- case EM2881_BOARD_DNT_DA2_HYBRID:
- em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
- em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
- msleep(50);
-
- /* NOTE: EM2881_DNT_DA2_HYBRID spend 140 msleep for digital
- and analog commands. If this commands doesn't work,
- add this timer. */
-
- /* Sets GPO/GPIO sequences for this device */
- dev->analog_gpio = default_analog;
- dev->digital_gpio = default_digital;
- dev->tun_analog_gpio = default_callback;
- dev->tun_digital_gpio = default_callback;
- break;
+ if (!dev->board.i2c_speed)
+ dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_100_KHZ;
- case EM2880_BOARD_MSI_DIGIVOX_AD:
- case EM2880_BOARD_MSI_DIGIVOX_AD_II:
- em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
- em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
- msleep(50);
-
- /* Sets GPO/GPIO sequences for this device */
- dev->analog_gpio = em2880_msi_digivox_ad_analog;
- dev->digital_gpio = em2880_msi_digivox_ad_digital;
- dev->tun_analog_gpio = default_callback;
- dev->tun_digital_gpio = default_callback;
- break;
-
- case EM2750_BOARD_UNKNOWN:
- case EM2750_BOARD_DLCW_130:
- em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x0a", 1);
- break;
+ em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
+ em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
+ msleep(50);
+ /* request some modules */
+ switch (dev->model) {
case EM2861_BOARD_PLEXTOR_PX_TV100U:
- em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
- em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
/* FIXME guess */
/* Turn on analog audio output */
- em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
break;
-
case EM2861_BOARD_KWORLD_PVRTV_300U:
case EM2880_BOARD_KWORLD_DVB_305U:
- em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
- em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x4c", 1);
- msleep(10);
- em28xx_write_regs(dev, 0x08, "\x6d", 1);
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
msleep(10);
- em28xx_write_regs(dev, 0x08, "\x7d", 1);
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
msleep(10);
break;
-
- case EM2870_BOARD_KWORLD_355U:
- em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
- em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
- msleep(50);
-
- /* Sets GPO/GPIO sequences for this device */
- dev->digital_gpio = em2870_kworld_355u_digital;
- break;
-
case EM2870_BOARD_COMPRO_VIDEOMATE:
- em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
- em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
/* TODO: someone can do some cleanup here...
not everything's needed */
- em28xx_write_regs(dev, 0x04, "\x00", 1);
+ em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
msleep(10);
- em28xx_write_regs(dev, 0x04, "\x01", 1);
+ em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
msleep(10);
- em28xx_write_regs(dev, 0x08, "\xfd", 1);
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
mdelay(70);
- em28xx_write_regs(dev, 0x08, "\xfc", 1);
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
mdelay(70);
- em28xx_write_regs(dev, 0x08, "\xdc", 1);
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
mdelay(70);
- em28xx_write_regs(dev, 0x08, "\xfc", 1);
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
mdelay(70);
break;
-
case EM2870_BOARD_TERRATEC_XS_MT2060:
- em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
- em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
/* this device needs some gpio writes to get the DVB-T
demod work */
- em28xx_write_regs(dev, 0x08, "\xfe", 1);
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
mdelay(70);
- em28xx_write_regs(dev, 0x08, "\xde", 1);
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
mdelay(70);
- dev->em28xx_write_regs(dev, 0x08, "\xfe", 1);
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
mdelay(70);
break;
-
case EM2870_BOARD_PINNACLE_PCTV_DVB:
- em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
/* this device needs some gpio writes to get the
DVB-T demod work */
- em28xx_write_regs(dev, 0x08, "\xfe", 1);
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
mdelay(70);
- em28xx_write_regs(dev, 0x08, "\xde", 1);
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
mdelay(70);
- em28xx_write_regs(dev, 0x08, "\xfe", 1);
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
mdelay(70);
- /* switch em2880 rc protocol */
- em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x22", 1);
- /* should be added ir_codes here */
break;
-
case EM2820_BOARD_GADMEI_UTV310:
- em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
- em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
- /* Turn on analog audio output */
- em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
- break;
-
- case EM2860_BOARD_GADMEI_UTV330:
- /* Turn on IR */
- em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
- em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
- /* should be added ir_codes here */
- break;
-
case EM2820_BOARD_MSI_VOX_USB_2:
- em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
- em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
- /* enables audio for that device */
- em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
+ /* enables audio for that devices */
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
break;
}
- em28xx_gpio_set(dev, dev->tun_analog_gpio);
+ em28xx_gpio_set(dev, dev->board.tuner_gpio);
em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
/* Unlock device */
- em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED);
+ em28xx_set_mode(dev, EM28XX_SUSPEND);
}
static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
ctl->demod = XC3028_FE_DEFAULT;
ctl->fname = XC3028L_DEFAULT_FIRMWARE;
break;
+ case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
/* FIXME: Better to specify the needed IF */
em28xx_set_model(dev);
dev->tuner_type = em28xx_boards[dev->model].tuner_type;
+ if (em28xx_boards[dev->model].tuner_addr)
+ dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
/* request some modules */
switch (dev->model) {
case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
+ case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
{
struct tveeprom tv;
if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
dev->i2s_speed = 2048000;
- dev->has_msp34xx = 1;
+ dev->board.has_msp34xx = 1;
}
#ifdef CONFIG_MODULES
if (tv.has_ir)
}
case EM2820_BOARD_KWORLD_PVRTV2800RF:
/* GPIO enables sound on KWORLD PVR TV 2800RF */
- em28xx_write_regs_req(dev, 0x00, 0x08, "\xf9", 1);
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
break;
case EM2820_BOARD_UNKNOWN:
case EM2800_BOARD_UNKNOWN:
break;
}
- if (dev->has_snapshot_button)
+ if (dev->board.has_snapshot_button)
em28xx_register_snapshot_button(dev);
- if (dev->valid == EM28XX_BOARD_NOT_VALIDATED) {
+ if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
em28xx_errdev("\n\n");
em28xx_errdev("The support for this board weren't "
"valid yet.\n");
#ifdef CONFIG_MODULES
/* request some modules */
- if (dev->has_msp34xx)
+ if (dev->board.has_msp34xx)
request_module("msp3400");
- if (dev->decoder == EM28XX_SAA7113 || dev->decoder == EM28XX_SAA7114)
+ if (dev->board.decoder == EM28XX_SAA711X)
request_module("saa7115");
- if (dev->decoder == EM28XX_TVP5150)
+ if (dev->board.decoder == EM28XX_TVP5150)
request_module("tvp5150");
- if (dev->tuner_type != TUNER_ABSENT)
+ if (dev->board.tuner_type != TUNER_ABSENT)
request_module("tuner");
#endif
em28xx_config_tuner(dev);
+
+ em28xx_ir_init(dev);
+}
+
+
+#if defined(CONFIG_MODULES) && defined(MODULE)
+static void request_module_async(struct work_struct *work)
+{
+ struct em28xx *dev = container_of(work,
+ struct em28xx, request_module_wk);
+
+ if (dev->has_audio_class)
+ request_module("snd-usb-audio");
+ else if (dev->has_alsa_audio)
+ request_module("em28xx-alsa");
+
+ if (dev->board.has_dvb)
+ request_module("em28xx-dvb");
+}
+
+static void request_modules(struct em28xx *dev)
+{
+ INIT_WORK(&dev->request_module_wk, request_module_async);
+ schedule_work(&dev->request_module_wk);
+}
+#else
+#define request_modules(dev)
+#endif /* CONFIG_MODULES */
+
+/*
+ * em28xx_realease_resources()
+ * unregisters the v4l2,i2c and usb devices
+ * called when the device gets disconected or at module unload
+*/
+void em28xx_release_resources(struct em28xx *dev)
+{
+ if (dev->sbutton_input_dev)
+ em28xx_deregister_snapshot_button(dev);
+
+ if (dev->ir)
+ em28xx_ir_fini(dev);
+
+ /*FIXME: I2C IR should be disconnected */
+
+ em28xx_release_analog_resources(dev);
+
+ em28xx_remove_from_devlist(dev);
+
+ em28xx_i2c_unregister(dev);
+ usb_put_dev(dev->udev);
+
+ /* Mark device as unused */
+ em28xx_devused &= ~(1 << dev->devno);
+};
+
+/*
+ * em28xx_init_dev()
+ * allocates and inits the device structs, registers i2c bus and v4l device
+ */
+int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
+ int minor)
+{
+ struct em28xx *dev = *devhandle;
+ int retval = -ENOMEM;
+ int errCode;
+
+ dev->udev = udev;
+ mutex_init(&dev->ctrl_urb_lock);
+ spin_lock_init(&dev->slock);
+ init_waitqueue_head(&dev->open);
+ init_waitqueue_head(&dev->wait_frame);
+ init_waitqueue_head(&dev->wait_stream);
+
+ dev->em28xx_write_regs = em28xx_write_regs;
+ dev->em28xx_read_reg = em28xx_read_reg;
+ dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
+ dev->em28xx_write_regs_req = em28xx_write_regs_req;
+ dev->em28xx_read_reg_req = em28xx_read_reg_req;
+ dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
+
+ em28xx_pre_card_setup(dev);
+
+ if (!dev->board.is_em2800) {
+ /* Sets I2C speed to 100 KHz */
+ retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
+ if (retval < 0) {
+ em28xx_errdev("%s: em28xx_write_regs_req failed!"
+ " retval [%d]\n",
+ __func__, retval);
+ return retval;
+ }
+ }
+
+ /* register i2c bus */
+ errCode = em28xx_i2c_register(dev);
+ if (errCode < 0) {
+ em28xx_errdev("%s: em28xx_i2c_register - errCode [%d]!\n",
+ __func__, errCode);
+ return errCode;
+ }
+
+ /* Do board specific init and eeprom reading */
+ em28xx_card_setup(dev);
+
+ /* Configure audio */
+ errCode = em28xx_audio_setup(dev);
+ if (errCode < 0) {
+ em28xx_errdev("%s: Error while setting audio - errCode [%d]!\n",
+ __func__, errCode);
+ }
+
+ /* wake i2c devices */
+ em28xx_wake_i2c(dev);
+
+ /* init video dma queues */
+ INIT_LIST_HEAD(&dev->vidq.active);
+ INIT_LIST_HEAD(&dev->vidq.queued);
+
+
+ if (dev->board.has_msp34xx) {
+ /* Send a reset to other chips via gpio */
+ errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
+ if (errCode < 0) {
+ em28xx_errdev("%s: em28xx_write_regs_req - "
+ "msp34xx(1) failed! errCode [%d]\n",
+ __func__, errCode);
+ return errCode;
+ }
+ msleep(3);
+
+ errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
+ if (errCode < 0) {
+ em28xx_errdev("%s: em28xx_write_regs_req - "
+ "msp34xx(2) failed! errCode [%d]\n",
+ __func__, errCode);
+ return errCode;
+ }
+ msleep(3);
+ }
+
+ em28xx_add_into_devlist(dev);
+
+ retval = em28xx_register_analog_devices(dev);
+ if (retval < 0) {
+ em28xx_release_resources(dev);
+ goto fail_reg_devices;
+ }
+
+ em28xx_init_extension(dev);
+
+ /* Save some power by putting tuner to sleep */
+ em28xx_i2c_call_clients(dev, TUNER_SET_STANDBY, NULL);
+
+ return 0;
+
+fail_reg_devices:
+ return retval;
}
+
+/*
+ * em28xx_usb_probe()
+ * checks for supported devices
+ */
+static int em28xx_usb_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ const struct usb_endpoint_descriptor *endpoint;
+ struct usb_device *udev;
+ struct usb_interface *uif;
+ struct em28xx *dev = NULL;
+ int retval = -ENODEV;
+ int i, nr, ifnum, isoc_pipe;
+ char *speed;
+ char descr[255] = "";
+
+ udev = usb_get_dev(interface_to_usbdev(interface));
+ ifnum = interface->altsetting[0].desc.bInterfaceNumber;
+
+ /* Check to see next free device and mark as used */
+ nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
+ em28xx_devused |= 1<<nr;
+
+ /* Don't register audio interfaces */
+ if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
+ em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
+ "interface %i, class %i\n",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct),
+ ifnum,
+ interface->altsetting[0].desc.bInterfaceClass);
+
+ em28xx_devused &= ~(1<<nr);
+ return -ENODEV;
+ }
+
+ endpoint = &interface->cur_altsetting->endpoint[0].desc;
+
+ /* check if the device has the iso in endpoint at the correct place */
+ if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_ISOC &&
+ (interface->altsetting[1].endpoint[0].desc.wMaxPacketSize == 940)) {
+ /* It's a newer em2874/em2875 device */
+ isoc_pipe = 0;
+ } else {
+ int check_interface = 1;
+ isoc_pipe = 1;
+ endpoint = &interface->cur_altsetting->endpoint[1].desc;
+ if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
+ USB_ENDPOINT_XFER_ISOC)
+ check_interface = 0;
+
+ if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)
+ check_interface = 0;
+
+ if (!check_interface) {
+ em28xx_err(DRIVER_NAME " video device (%04x:%04x): "
+ "interface %i, class %i found.\n",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct),
+ ifnum,
+ interface->altsetting[0].desc.bInterfaceClass);
+
+ em28xx_err(DRIVER_NAME " This is an anciliary "
+ "interface not used by the driver\n");
+
+ em28xx_devused &= ~(1<<nr);
+ return -ENODEV;
+ }
+ }
+
+ switch (udev->speed) {
+ case USB_SPEED_LOW:
+ speed = "1.5";
+ break;
+ case USB_SPEED_UNKNOWN:
+ case USB_SPEED_FULL:
+ speed = "12";
+ break;
+ case USB_SPEED_HIGH:
+ speed = "480";
+ break;
+ default:
+ speed = "unknown";
+ }
+
+ if (udev->manufacturer)
+ strlcpy(descr, udev->manufacturer, sizeof(descr));
+
+ if (udev->product) {
+ if (*descr)
+ strlcat(descr, " ", sizeof(descr));
+ strlcat(descr, udev->product, sizeof(descr));
+ }
+ if (*descr)
+ strlcat(descr, " ", sizeof(descr));
+
+ printk(DRIVER_NAME ": New device %s@ %s Mbps "
+ "(%04x:%04x, interface %d, class %d)\n",
+ descr,
+ speed,
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct),
+ ifnum,
+ interface->altsetting->desc.bInterfaceNumber);
+
+ if (nr >= EM28XX_MAXBOARDS) {
+ printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
+ EM28XX_MAXBOARDS);
+ em28xx_devused &= ~(1<<nr);
+ return -ENOMEM;
+ }
+
+ /* allocate memory for our device state and initialize it */
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (dev == NULL) {
+ em28xx_err(DRIVER_NAME ": out of memory!\n");
+ em28xx_devused &= ~(1<<nr);
+ return -ENOMEM;
+ }
+
+ snprintf(dev->name, 29, "em28xx #%d", nr);
+ dev->devno = nr;
+ dev->model = id->driver_info;
+ dev->alt = -1;
+
+ /* Checks if audio is provided by some interface */
+ for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
+ uif = udev->config->interface[i];
+ if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
+ dev->has_audio_class = 1;
+ break;
+ }
+ }
+
+ /* compute alternate max packet sizes */
+ uif = udev->actconfig->interface[0];
+
+ dev->num_alt = uif->num_altsetting;
+ dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL);
+
+ if (dev->alt_max_pkt_size == NULL) {
+ em28xx_errdev("out of memory!\n");
+ em28xx_devused &= ~(1<<nr);
+ kfree(dev);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < dev->num_alt ; i++) {
+ u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
+ dev->alt_max_pkt_size[i] =
+ (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
+ }
+
+ if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
+ dev->model = card[nr];
+
+ /* allocate device struct */
+ mutex_init(&dev->lock);
+ mutex_lock(&dev->lock);
+ retval = em28xx_init_dev(&dev, udev, nr);
+ if (retval) {
+ em28xx_devused &= ~(1<<dev->devno);
+ kfree(dev);
+
+ return retval;
+ }
+
+ /* save our data pointer in this interface device */
+ usb_set_intfdata(interface, dev);
+
+ request_modules(dev);
+
+ /* Should be the last thing to do, to avoid newer udev's to
+ open the device before fully initializing it
+ */
+ mutex_unlock(&dev->lock);
+
+ return 0;
+}
+
+/*
+ * em28xx_usb_disconnect()
+ * called when the device gets diconencted
+ * video device will be unregistered on v4l2_close in case it is still open
+ */
+static void em28xx_usb_disconnect(struct usb_interface *interface)
+{
+ struct em28xx *dev;
+
+ dev = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+
+ if (!dev)
+ return;
+
+ em28xx_info("disconnecting %s\n", dev->vdev->name);
+
+ /* wait until all current v4l2 io is finished then deallocate
+ resources */
+ mutex_lock(&dev->lock);
+
+ wake_up_interruptible_all(&dev->open);
+
+ if (dev->users) {
+ em28xx_warn
+ ("device /dev/video%d is open! Deregistration and memory "
+ "deallocation are deferred on close.\n",
+ dev->vdev->num);
+
+ dev->state |= DEV_MISCONFIGURED;
+ em28xx_uninit_isoc(dev);
+ dev->state |= DEV_DISCONNECTED;
+ wake_up_interruptible(&dev->wait_frame);
+ wake_up_interruptible(&dev->wait_stream);
+ } else {
+ dev->state |= DEV_DISCONNECTED;
+ em28xx_release_resources(dev);
+ }
+
+ em28xx_close_extension(dev);
+
+ mutex_unlock(&dev->lock);
+
+ if (!dev->users) {
+ kfree(dev->alt_max_pkt_size);
+ kfree(dev);
+ }
+}
+
+static struct usb_driver em28xx_usb_driver = {
+ .name = "em28xx",
+ .probe = em28xx_usb_probe,
+ .disconnect = em28xx_usb_disconnect,
+ .id_table = em28xx_id_table,
+};
+
+static int __init em28xx_module_init(void)
+{
+ int result;
+
+ /* register this driver with the USB subsystem */
+ result = usb_register(&em28xx_usb_driver);
+ if (result)
+ em28xx_err(DRIVER_NAME
+ " usb_register failed. Error number %d.\n", result);
+
+ printk(KERN_INFO DRIVER_NAME " driver loaded\n");
+
+ return result;
+}
+
+static void __exit em28xx_module_exit(void)
+{
+ /* deregister this driver with the USB subsystem */
+ usb_deregister(&em28xx_usb_driver);
+}
+
+module_init(em28xx_module_init);
+module_exit(em28xx_module_exit);
git.openpandora.org / pandora-kernel.git / blobdiff