V4L/DVB(7879): Adding cx18 Support for mxl5005s

[pandora-kernel.git] / drivers / media / video / cx18 / cx18-dvb.c

diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index 65efe69..c974417 100644 (file)
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -24,25 +24,27 @@
 #include "cx18-streams.h"
 #include "cx18-cards.h"
 #include "s5h1409.h"
-
-/* Wait until the MXL500X driver is merged */
-#ifdef HAVE_MXL500X
-#include "mxl500x.h"
-#endif
+#include "mxl5005s.h"
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 #define CX18_REG_DMUX_NUM_PORT_0_CONTROL 0xd5a000
 
-#ifdef HAVE_MXL500X
-static struct mxl500x_config hauppauge_hvr1600_tuner = {
-       .delsys    = MXL500x_MODE_ATSC,
-       .octf      = MXL500x_OCTF_CH,
-       .xtal_freq = 16000000,
-       .iflo_freq = 5380000,
-       .ref_freq  = 322800000,
-       .rssi_ena  = MXL_RSSI_ENABLE,
-       .addr      = 0xC6 >> 1,
+static struct mxl5005s_config hauppauge_hvr1600_tuner = {
+       .i2c_address     = 0xC6 >> 1,
+       .if_freq         = IF_FREQ_5380000HZ,
+       .xtal_freq       = CRYSTAL_FREQ_16000000HZ,
+       .agc_mode        = MXL_SINGLE_AGC,
+       .tracking_filter = MXL_TF_C_H,
+       .rssi_enable     = MXL_RSSI_ENABLE,
+       .cap_select      = MXL_CAP_SEL_ENABLE,
+       .div_out         = MXL_DIV_OUT_4,
+       .clock_out       = MXL_CLOCK_OUT_DISABLE,
+       .output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+       .top             = MXL5005S_TOP_25P2,
+       .mod_mode        = MXL_DIGITAL_MODE,
+       .if_mode         = MXL_ZERO_IF,
+       .AgcMasterByte   = 0x00,
 };
 
 static struct s5h1409_config hauppauge_hvr1600_config = {
@@ -55,7 +57,6 @@ static struct s5h1409_config hauppauge_hvr1600_config = {
        .mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
 
 };
-#endif
 
 static int dvb_register(struct cx18_stream *stream);
 
@@ -252,21 +253,18 @@ static int dvb_register(struct cx18_stream *stream)
        int ret = 0;
 
        switch (cx->card->type) {
-/* Wait until the MXL500X driver is merged */
-#ifdef HAVE_MXL500X
        case CX18_CARD_HVR_1600_ESMT:
        case CX18_CARD_HVR_1600_SAMSUNG:
                dvb->fe = dvb_attach(s5h1409_attach,
                        &hauppauge_hvr1600_config,
                        &cx->i2c_adap[0]);
                if (dvb->fe != NULL) {
-                       dvb_attach(mxl500x_attach, dvb->fe,
-                               &hauppauge_hvr1600_tuner,
-                               &cx->i2c_adap[0]);
+                       dvb_attach(mxl5005s_attach, dvb->fe,
+                               &cx->i2c_adap[0],
+                               &hauppauge_hvr1600_tuner);
                        ret = 0;
                }
                break;
-#endif
        default:
                /* No Digital Tv Support */
                break;