static void geovision_muxsel(struct bttv *btv, unsigned int input);
+static void phytec_muxsel(struct bttv *btv, unsigned int input);
+
+static void gv800s_muxsel(struct bttv *btv, unsigned int input);
+static void gv800s_init(struct bttv *btv);
+
static int terratec_active_radio_upgrade(struct bttv *btv);
static int tea5757_read(struct bttv *btv);
static int tea5757_write(struct bttv *btv, int value);
static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
+static unsigned int audiodev[BTTV_MAX];
+static unsigned int saa6588[BTTV_MAX];
static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
-#ifdef MODULE
-static unsigned int autoload = 1;
-#else
-static unsigned int autoload;
-#endif
+static unsigned int autoload = UNSET;
static unsigned int gpiomask = UNSET;
static unsigned int audioall = UNSET;
static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
module_param_array(tuner, int, NULL, 0444);
module_param_array(svhs, int, NULL, 0444);
module_param_array(remote, int, NULL, 0444);
+module_param_array(audiodev, int, NULL, 0444);
module_param_array(audiomux, int, NULL, 0444);
MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
MODULE_PARM_DESC(tuner,"specify installed tuner type");
-MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
+MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
+MODULE_PARM_DESC(audiodev, "specify audio device:\n"
+ "\t\t-1 = no audio\n"
+ "\t\t 0 = autodetect (default)\n"
+ "\t\t 1 = msp3400\n"
+ "\t\t 2 = tda7432\n"
+ "\t\t 3 = tvaudio");
+MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
" [some VIA/SIS chipsets are known to have problem with overlay]");
/* Duplicate PCI ID, reconfigure for this board during the eeprom read.
* { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
+ { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"},
+
/* DVB cards (using pci function .1 for mpeg data xfer) */
{ 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
{ 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" },
{ 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" },
{ 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" },
+ { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
+ { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
+ { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
+ { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
+
+ { 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" },
+ { 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" },
+ { 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" },
+ { 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" },
+ { 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" },
+ { 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" },
+ { 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" },
+ { 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" },
+
{ 0, -1, NULL }
};
[BTTV_BOARD_UNKNOWN] = {
.name = " *** UNKNOWN/GENERIC *** ",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
.svhs = 2,
- .muxsel = { 2, 3, 1, 0 },
+ .muxsel = MUXSEL(2, 3, 1, 0),
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_MIRO] = {
.name = "MIRO PCTV",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 15,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
.needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_HAUPPAUGE] = {
.name = "Hauppauge (bt848)",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 7,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
.needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_STB] = {
.name = "STB, Gateway P/N 6000699 (bt848)",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 7,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 4, 0, 2, 3 },
.gpiomute = 1,
.no_msp34xx = 1,
.needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},
[BTTV_BOARD_INTEL] = {
.name = "Intel Create and Share PCI/ Smart Video Recorder III",
.video_inputs = 4,
- .audio_inputs = 0,
- .tuner = UNSET,
+ /* .audio_inputs= 0, */
.svhs = 2,
.gpiomask = 0,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0 },
.needs_tvaudio = 0,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_DIAMOND] = {
.name = "Diamond DTV2000",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 3,
- .muxsel = { 2, 3, 1, 0 },
+ .muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0, 1, 0, 1 },
.gpiomute = 3,
.needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_AVERMEDIA] = {
.name = "AVerMedia TVPhone",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 3,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomask = 0x0f,
.gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
/* 0x04 for some cards ?? */
.needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.audio_mode_gpio= avermedia_tvphone_audio,
.has_remote = 1,
},
[BTTV_BOARD_MATRIX_VISION] = {
.name = "MATRIX-Vision MV-Delta",
.video_inputs = 5,
- .audio_inputs = 1,
- .tuner = UNSET,
+ /* .audio_inputs= 1, */
.svhs = 3,
.gpiomask = 0,
- .muxsel = { 2, 3, 1, 0, 0 },
+ .muxsel = MUXSEL(2, 3, 1, 0, 0),
.gpiomux = { 0 },
.needs_tvaudio = 1,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
/* ---- card 0x08 ---------------------------------- */
[BTTV_BOARD_FLYVIDEO] = {
.name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xc00,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0xc00, 0x800, 0x400 },
.gpiomute = 0xc00,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_TURBOTV] = {
.name = "IMS/IXmicro TurboTV",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 3,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 1, 2, 3 },
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_HAUPPAUGE878] = {
.name = "Hauppauge (bt878)",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x0f, /* old: 7 */
- .muxsel = { 2, 0, 1, 1 },
+ .muxsel = MUXSEL(2, 0, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_MIROPRO] = {
.name = "MIRO PCTV pro",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x3014f,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20001,0x10001, 0, 0 },
.gpiomute = 10,
.needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
/* ---- card 0x0c ---------------------------------- */
[BTTV_BOARD_ADSTECH_TV] = {
.name = "ADS Technologies Channel Surfer TV (bt848)",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 15,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 13, 14, 11, 7 },
.needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_AVERMEDIA98] = {
.name = "AVerMedia TVCapture 98",
.video_inputs = 3,
- .audio_inputs = 4,
- .tuner = 0,
+ /* .audio_inputs= 4, */
.svhs = 2,
.gpiomask = 15,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 13, 14, 11, 7 },
.needs_tvaudio = 1,
.msp34xx_alt = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.audio_mode_gpio= avermedia_tv_stereo_audio,
.no_gpioirq = 1,
},
[BTTV_BOARD_VHX] = {
.name = "Aimslab Video Highway Xtreme (VHX)",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 7,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
.gpiomute = 4,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_ZOLTRIX] = {
.name = "Zoltrix TV-Max",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 15,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 1, 0 },
.gpiomute = 10,
.needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
/* ---- card 0x10 ---------------------------------- */
[BTTV_BOARD_PIXVIEWPLAYTV] = {
.name = "Prolink Pixelview PlayTV (bt878)",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x01fe00,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
/* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
.gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
.gpiomute = 0x002000,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_WINVIEW_601] = {
.name = "Leadtek WinView 601",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x8300f8,
- .muxsel = { 2, 3, 1, 1,0 },
+ .muxsel = MUXSEL(2, 3, 1, 1, 0),
.gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
.gpiomute = 0xcfa007,
.needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.volume_gpio = winview_volume,
.has_radio = 1,
},
[BTTV_BOARD_AVEC_INTERCAP] = {
.name = "AVEC Intercapture",
.video_inputs = 3,
- .audio_inputs = 2,
- .tuner = 0,
+ /* .audio_inputs= 2, */
.svhs = 2,
.gpiomask = 0,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 0, 0, 0 },
.needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_LIFE_FLYKIT] = {
.name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = UNSET,
- .svhs = UNSET,
+ /* .audio_inputs= 1, */
+ .svhs = NO_SVHS,
.gpiomask = 0x8dff00,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0 },
.no_msp34xx = 1,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
/* ---- card 0x14 ---------------------------------- */
[BTTV_BOARD_CEI_RAFFLES] = {
.name = "CEI Raffles Card",
.video_inputs = 3,
- .audio_inputs = 3,
- .tuner = 0,
+ /* .audio_inputs= 3, */
.svhs = 2,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_CONFERENCETV] = {
.name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
.video_inputs = 4,
- .audio_inputs = 2, /* tuner, line in */
- .tuner = 0,
+ /* .audio_inputs= 2, tuner, line in */
.svhs = 2,
.gpiomask = 0x1800,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0x800, 0x1000, 0x1000 },
.gpiomute = 0x1800,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_PHOEBE_TVMAS] = {
.name = "Askey CPH050/ Phoebe Tv Master + FM",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xc00,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 0x800, 0x400 },
.gpiomute = 0xc00,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_MODTEC_205] = {
.name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
- .svhs = UNSET,
+ /* .audio_inputs= 1, */
+ .svhs = NO_SVHS,
+ .has_dig_in = 1,
.gpiomask = 7,
- .muxsel = { 2, 3, -1 },
- .digital_mode = DIGITAL_MODE_CAMERA,
+ .muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */
+ /* .digital_mode= DIGITAL_MODE_CAMERA, */
.gpiomux = { 0, 0, 0, 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ALPS_TSBB5_PAL_I,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
/* ---- card 0x18 ---------------------------------- */
[BTTV_BOARD_MAGICTVIEW061] = {
.name = "Askey CPH05X/06X (bt878) [many vendors]",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xe00,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = {0x400, 0x400, 0x400, 0x400 },
.gpiomute = 0xc00,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.has_remote = 1,
},
[BTTV_BOARD_VOBIS_BOOSTAR] = {
.name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x1f0fff,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
.gpiomute = 0x40000,
.needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.audio_mode_gpio= terratv_audio,
},
[BTTV_BOARD_HAUPPAUG_WCAM] = {
.name = "Hauppauge WinCam newer (bt878)",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 3,
.gpiomask = 7,
- .muxsel = { 2, 0, 1, 1 },
+ .muxsel = MUXSEL(2, 0, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
.needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_MAXI] = {
.name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
.video_inputs = 4,
- .audio_inputs = 2,
- .tuner = 0,
+ /* .audio_inputs= 2, */
.svhs = 2,
.gpiomask = 0x1800,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0x800, 0x1000, 0x1000 },
.gpiomute = 0x1800,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_SECAM,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
/* ---- card 0x1c ---------------------------------- */
[BTTV_BOARD_TERRATV] = {
.name = "Terratec TerraTV+ Version 1.1 (bt878)",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x1f0fff,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
.gpiomute = 0x40000,
.needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.audio_mode_gpio= terratv_audio,
/* GPIO wiring:
External 20 pin connector (for Active Radio Upgrade board)
/* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
.name = "Imagenation PXC200",
.video_inputs = 5,
- .audio_inputs = 1,
- .tuner = UNSET,
+ /* .audio_inputs= 1, */
.svhs = 1, /* was: 4 */
.gpiomask = 0,
- .muxsel = { 2, 3, 1, 0, 0},
+ .muxsel = MUXSEL(2, 3, 1, 0, 0),
.gpiomux = { 0 },
.needs_tvaudio = 1,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.muxsel_hook = PXC200_muxsel,
},
[BTTV_BOARD_FLYVIDEO_98] = {
.name = "Lifeview FlyVideo 98 LR50",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x1800, /* 0x8dfe00 */
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0x0800, 0x1000, 0x1000 },
.gpiomute = 0x1800,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_IPROTV] = {
.name = "Formac iProTV, Formac ProTV I (bt848)",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 3,
.gpiomask = 1,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 0, 0, 0 },
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
/* ---- card 0x20 ---------------------------------- */
[BTTV_BOARD_INTEL_C_S_PCI] = {
.name = "Intel Create and Share PCI/ Smart Video Recorder III",
.video_inputs = 4,
- .audio_inputs = 0,
- .tuner = UNSET,
+ /* .audio_inputs= 0, */
.svhs = 2,
.gpiomask = 0,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0 },
.needs_tvaudio = 0,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_TERRATVALUE] = {
.name = "Terratec TerraTValue Version Bt878",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xffff00,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x500, 0, 0x300, 0x900 },
.gpiomute = 0x900,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_WINFAST2000] = {
.name = "Leadtek WinFast 2000/ WinFast 2000 XP",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
- .muxsel = { 2, 3, 1, 1, 0 }, /* TV, CVid, SVid, CVid over SVid connector */
+ /* TV, CVid, SVid, CVid over SVid connector */
+ .muxsel = MUXSEL(2, 3, 1, 1, 0),
/* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
.gpiomask = 0xb33000,
.gpiomux = { 0x122000,0x1000,0x0000,0x620000 },
.has_radio = 1,
.tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.audio_mode_gpio= winfast2000_audio,
.has_remote = 1,
},
[BTTV_BOARD_CHRONOS_VS2] = {
.name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
.video_inputs = 4,
- .audio_inputs = 3,
- .tuner = 0,
+ /* .audio_inputs= 3, */
.svhs = 2,
.gpiomask = 0x1800,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0x800, 0x1000, 0x1000 },
.gpiomute = 0x1800,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
/* ---- card 0x24 ---------------------------------- */
[BTTV_BOARD_TYPHOON_TVIEW] = {
.name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
.video_inputs = 4,
- .audio_inputs = 3,
- .tuner = 0,
+ /* .audio_inputs= 3, */
.svhs = 2,
.gpiomask = 0x1800,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0x800, 0x1000, 0x1000 },
.gpiomute = 0x1800,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.has_radio = 1,
},
[BTTV_BOARD_PXELVWPLTVPRO] = {
.name = "Prolink PixelView PlayTV pro",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xff,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x21, 0x20, 0x24, 0x2c },
.gpiomute = 0x29,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_MAGICTVIEW063] = {
.name = "Askey CPH06X TView99",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x551e00,
- .muxsel = { 2, 3, 1, 0 },
+ .muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0x551400, 0x551200, 0, 0 },
.gpiomute = 0x551c00,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.has_remote = 1,
},
[BTTV_BOARD_PINNACLE] = {
.name = "Pinnacle PCTV Studio/Rave",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x03000F,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0xd0001, 0, 0 },
.gpiomute = 1,
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
/* ---- card 0x28 ---------------------------------- */
[BTTV_BOARD_STB2] = {
.name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 7,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 4, 0, 2, 3 },
.gpiomute = 1,
.no_msp34xx = 1,
.needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},
[BTTV_BOARD_AVPHONE98] = {
.name = "AVerMedia TVPhone 98",
.video_inputs = 3,
- .audio_inputs = 4,
- .tuner = 0,
+ /* .audio_inputs= 4, */
.svhs = 2,
.gpiomask = 15,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 13, 4, 11, 7 },
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.has_radio = 1,
.audio_mode_gpio= avermedia_tvphone_audio,
},
[BTTV_BOARD_PV951] = {
.name = "ProVideo PV951", /* pic16c54 */
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0,
- .muxsel = { 2, 3, 1, 1},
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 0, 0},
.needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_ONAIR_TV] = {
.name = "Little OnAir TV",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xe00b,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
.gpiomute = 0xff3ffc,
.no_msp34xx = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
/* ---- card 0x2c ---------------------------------- */
[BTTV_BOARD_SIGMA_TVII_FM] = {
.name = "Sigma TVII-FM",
.video_inputs = 2,
- .audio_inputs = 1,
- .tuner = 0,
- .svhs = UNSET,
+ /* .audio_inputs= 1, */
+ .svhs = NO_SVHS,
.gpiomask = 3,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 1, 0, 2 },
.gpiomute = 3,
.no_msp34xx = 1,
.pll = PLL_NONE,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_MATRIX_VISION2] = {
.name = "MATRIX-Vision MV-Delta 2",
.video_inputs = 5,
- .audio_inputs = 1,
- .tuner = UNSET,
+ /* .audio_inputs= 1, */
.svhs = 3,
.gpiomask = 0,
- .muxsel = { 2, 3, 1, 0, 0 },
+ .muxsel = MUXSEL(2, 3, 1, 0, 0),
.gpiomux = { 0 },
.no_msp34xx = 1,
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_ZOLTRIX_GENIE] = {
.name = "Zoltrix Genie TV/FM",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xbcf03f,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
.gpiomute = 0xbcb03f,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_4039FR5_NTSC,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_TERRATVRADIO] = {
.name = "Terratec TV/Radio+",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x70000,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
.gpiomute = 0x40000,
.needs_tvaudio = 1,
.pll = PLL_35,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.has_radio = 1,
},
[BTTV_BOARD_DYNALINK] = {
.name = "Askey CPH03x/ Dynalink Magic TView",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 15,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = {2,0,0,0 },
.gpiomute = 1,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_GVBCTV3PCI] = {
.name = "IODATA GV-BCTV3/PCI",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x010f00,
- .muxsel = {2, 3, 0, 0 },
+ .muxsel = MUXSEL(2, 3, 0, 0),
.gpiomux = {0x10000, 0, 0x10000, 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ALPS_TSHC6_NTSC,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.audio_mode_gpio= gvbctv3pci_audio,
},
[BTTV_BOARD_PXELVWPLTVPAK] = {
.name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
.video_inputs = 5,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 3,
+ .has_dig_in = 1,
.gpiomask = 0xAA0000,
- .muxsel = { 2,3,1,1,-1 },
- .digital_mode = DIGITAL_MODE_CAMERA,
+ .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
+ /* .digital_mode= DIGITAL_MODE_CAMERA, */
.gpiomux = { 0x20000, 0, 0x80000, 0x80000 },
.gpiomute = 0xa8000,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.has_remote = 1,
/* GPIO wiring: (different from Rev.4C !)
GPIO17: U4.A0 (first hef4052bt)
[BTTV_BOARD_EAGLE] = {
.name = "Eagle Wireless Capricorn2 (bt878A)",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 7,
- .muxsel = { 2, 0, 1, 1 },
+ .muxsel = MUXSEL(2, 0, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
.pll = PLL_28,
.tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
/* ---- card 0x34 ---------------------------------- */
/* David Härdeman <david@2gen.com> */
.name = "Pinnacle PCTV Studio Pro",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 3,
.gpiomask = 0x03000F,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 0xd0001, 0, 0 },
.gpiomute = 10,
/* sound path (5 sources):
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_TVIEW_RDS_FM] = {
/* Claas Langbehn <claas@bigfoot.com>,
Sven Grothklags <sven@upb.de> */
.name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
.video_inputs = 4,
- .audio_inputs = 3,
- .tuner = 0,
+ /* .audio_inputs= 3, */
.svhs = 2,
.gpiomask = 0x1c,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 0x10, 8 },
.gpiomute = 4,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.has_radio = 1,
},
[BTTV_BOARD_LIFETEC_9415] = {
options tuner type=5 */
.name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x18e0,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
.gpiomute = 0x18e0,
/* For cards with tda9820/tda9821:
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_BESTBUY_EASYTV] = {
/* Miguel Angel Alvarez <maacruz@navegalia.com>
old Easy TV BT848 version (model CPH031) */
.name = "Askey CPH031/ BESTBUY Easy TV",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xF,
- .muxsel = { 2, 3, 1, 0 },
+ .muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
/* ---- card 0x38 ---------------------------------- */
/* Gordon Heydon <gjheydon@bigfoot.com ('98) */
.name = "Lifeview FlyVideo 98FM LR50",
.video_inputs = 4,
- .audio_inputs = 3,
- .tuner = 0,
+ /* .audio_inputs= 3, */
.svhs = 2,
.gpiomask = 0x1800,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0x800, 0x1000, 0x1000 },
.gpiomute = 0x1800,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
/* This is the ultimate cheapo capture card
* just a BT848A on a small PCB!
[BTTV_BOARD_GRANDTEC] = {
.name = "GrandTec 'Grand Video Capture' (Bt848)",
.video_inputs = 2,
- .audio_inputs = 0,
- .tuner = UNSET,
+ /* .audio_inputs= 0, */
.svhs = 1,
.gpiomask = 0,
- .muxsel = { 3, 1 },
+ .muxsel = MUXSEL(3, 1),
.gpiomux = { 0 },
.needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_35,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_ASKEY_CPH060] = {
/* Daniel Herrington <daniel.herrington@home.com> */
.name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xe00,
- .muxsel = { 2, 3, 1, 1},
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x400, 0x400, 0x400, 0x400 },
.gpiomute = 0x800,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_4036FY5_NTSC,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_ASKEY_CPH03X] = {
/* Matti Mottus <mottus@physic.ut.ee> */
.name = "Askey CPH03x TV Capturer",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x03000F,
- .muxsel = { 2, 3, 1, 0 },
+ .muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 1,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
/* ---- card 0x3c ---------------------------------- */
/* Philip Blundell <philb@gnu.org> */
.name = "Modular Technology MM100PCTV",
.video_inputs = 2,
- .audio_inputs = 2,
- .tuner = 0,
- .svhs = UNSET,
+ /* .audio_inputs= 2, */
+ .svhs = NO_SVHS,
.gpiomask = 11,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0, 0, 1 },
.gpiomute = 8,
.pll = PLL_35,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_GMV1] = {
/* Adrian Cox <adrian@humboldt.co.uk */
.name = "AG Electronics GMV1",
.video_inputs = 2,
- .audio_inputs = 0,
- .tuner = UNSET,
+ /* .audio_inputs= 0, */
.svhs = 1,
.gpiomask = 0xF,
- .muxsel = { 2, 2 },
+ .muxsel = MUXSEL(2, 2),
.gpiomux = { },
.no_msp34xx = 1,
.needs_tvaudio = 0,
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_BESTBUY_EASYTV2] = {
/* Miguel Angel Alvarez <maacruz@navegalia.com>
special thanks to Informatica Mieres for providing the card */
.name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
.video_inputs = 3,
- .audio_inputs = 2,
- .tuner = 0,
+ /* .audio_inputs= 2, */
.svhs = 2,
.gpiomask = 0xFF,
- .muxsel = { 2, 3, 1, 0 },
+ .muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 1, 0, 4, 4 },
.gpiomute = 9,
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_ATI_TVWONDER] = {
/* Lukas Gebauer <geby@volny.cz> */
.name = "ATI TV-Wonder",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xf03f,
- .muxsel = { 2, 3, 1, 0 },
+ .muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0xbffe, 0, 0xbfff, 0 },
.gpiomute = 0xbffe,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
/* ---- card 0x40 ---------------------------------- */
/* Lukas Gebauer <geby@volny.cz> */
.name = "ATI TV-Wonder VE",
.video_inputs = 2,
- .audio_inputs = 1,
- .tuner = 0,
- .svhs = UNSET,
+ /* .audio_inputs= 1, */
+ .svhs = NO_SVHS,
.gpiomask = 1,
- .muxsel = { 2, 3, 0, 1 },
+ .muxsel = MUXSEL(2, 3, 0, 1),
.gpiomux = { 0, 0, 1, 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_FLYVIDEO2000] = {
/* DeeJay <deejay@westel900.net (2000S) */
.name = "Lifeview FlyVideo 2000S LR90",
.video_inputs = 3,
- .audio_inputs = 3,
- .tuner = 0,
+ /* .audio_inputs= 3, */
.svhs = 2,
.gpiomask = 0x18e0,
- .muxsel = { 2, 3, 0, 1 },
+ .muxsel = MUXSEL(2, 3, 0, 1),
/* Radio changed from 1e80 to 0x800 to make
FlyVideo2000S in .hu happy (gm)*/
/* -dk-???: set mute=0x1800 for tda9874h daughterboard */
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_TERRATVALUER] = {
.name = "Terratec TValueRadio",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xffff00,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x500, 0x500, 0x300, 0x900 },
.gpiomute = 0x900,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.has_radio = 1,
},
[BTTV_BOARD_GVBCTV4PCI] = {
/* TANAKA Kei <peg00625@nifty.com> */
.name = "IODATA GV-BCTV4/PCI",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x010f00,
- .muxsel = {2, 3, 0, 0 },
+ .muxsel = MUXSEL(2, 3, 0, 0),
.gpiomux = {0x10000, 0, 0x10000, 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.audio_mode_gpio= gvbctv3pci_audio,
},
/* try "insmod msp3400 simple=0" if you have
* sound problems with this card. */
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
- .svhs = UNSET,
+ /* .audio_inputs= 1, */
+ .svhs = NO_SVHS,
.gpiomask = 0x4f8a00,
/* 0x100000: 1=MSP enabled (0=disable again)
* 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
.gpiomute = 0x947fff,
/* tvtuner, radio, external,internal, mute, stereo
* tuner, Composit, SVid, Composit-on-Svid-adapter */
- .muxsel = { 2, 3 ,0 ,1 },
+ .muxsel = MUXSEL(2, 3, 0, 1),
.tuner_type = TUNER_MT2032,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},
/* try "insmod msp3400 simple=0" if you have
* sound problems with this card. */
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
- .svhs = UNSET,
+ /* .audio_inputs= 1, */
+ .svhs = NO_SVHS,
.gpiomask = 0x4f8a00,
/* 0x100000: 1=MSP enabled (0=disable again)
* 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
.gpiomute = 0x947fff,
/* tvtuner, radio, external,internal, mute, stereo
* tuner, Composit, SVid, Composit-on-Svid-adapter */
- .muxsel = { 2, 3 ,0 ,1 },
+ .muxsel = MUXSEL(2, 3, 0, 1),
.tuner_type = TUNER_MT2032,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},
/* Philip Blundell <pb@nexus.co.uk> */
.name = "Active Imaging AIMMS",
.video_inputs = 1,
- .audio_inputs = 0,
- .tuner = UNSET,
- .tuner_type = UNSET,
+ /* .audio_inputs= 0, */
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.pll = PLL_28,
- .muxsel = { 2 },
+ .muxsel = MUXSEL(2),
.gpiomask = 0
},
[BTTV_BOARD_PV_BT878P_PLUS] = {
/* Tomasz Pyra <hellfire@sedez.iq.pl> */
.name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
.video_inputs = 3,
- .audio_inputs = 4,
- .tuner = 0,
+ /* .audio_inputs= 4, */
.svhs = 2,
.gpiomask = 15,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
.gpiomute = 13,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_LG_PAL_I_FM,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.has_remote = 1,
/* GPIO wiring:
GPIO0: U4.A0 (hef4052bt)
[BTTV_BOARD_FLYVIDEO98EZ] = {
.name = "Lifeview FlyVideo 98EZ (capture only) LR51",
.video_inputs = 4,
- .audio_inputs = 0,
- .tuner = UNSET,
+ /* .audio_inputs= 0, */
.svhs = 2,
- .muxsel = { 2, 3, 1, 1 }, /* AV1, AV2, SVHS, CVid adapter on SVHS */
+ /* AV1, AV2, SVHS, CVid adapter on SVHS */
+ .muxsel = MUXSEL(2, 3, 1, 1),
.pll = PLL_28,
.no_msp34xx = 1,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
/* ---- card 0x48 ---------------------------------- */
/* Dariusz Kowalewski <darekk@automex.pl> */
.name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x3f,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x01, 0x00, 0x03, 0x03 },
.gpiomute = 0x09,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
.has_radio = 1, /* Note: not all cards have radio */
.has_remote = 1,
/* you must jumper JP5 for the card to work */
.name = "Sensoray 311",
.video_inputs = 5,
- .audio_inputs = 0,
- .tuner = UNSET,
+ /* .audio_inputs= 0, */
.svhs = 4,
.gpiomask = 0,
- .muxsel = { 2, 3, 1, 0, 0 },
+ .muxsel = MUXSEL(2, 3, 1, 0, 0),
.gpiomux = { 0 },
.needs_tvaudio = 0,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_RV605] = {
/* Miguel Freitas <miguel@cetuc.puc-rio.br> */
.name = "RemoteVision MX (RV605)",
.video_inputs = 16,
- .audio_inputs = 0,
- .tuner = UNSET,
- .svhs = UNSET,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
.gpiomask = 0x00,
.gpiomask2 = 0x07ff,
- .muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
- 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
+ .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
.no_msp34xx = 1,
.no_tda9875 = 1,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.muxsel_hook = rv605_muxsel,
},
[BTTV_BOARD_POWERCLR_MTV878] = {
.name = "Powercolor MTV878/ MTV878R/ MTV878F",
.video_inputs = 3,
- .audio_inputs = 2,
- .tuner = 0,
+ /* .audio_inputs= 2, */
.svhs = 2,
.gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
- .muxsel = { 2, 1, 1, },
+ .muxsel = MUXSEL(2, 1, 1),
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 4,
.needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},
/* Masaki Suzuki <masaki@btree.org> */
.name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x140007,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.audio_mode_gpio= windvr_audio,
},
[BTTV_BOARD_GRANDTEC_MULTI] = {
.name = "GrandTec Multi Capture Card (Bt878)",
.video_inputs = 4,
- .audio_inputs = 0,
- .tuner = UNSET,
- .svhs = UNSET,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
.gpiomask = 0,
- .muxsel = { 2, 3, 1, 0 },
+ .muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0 },
.needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_KWORLD] = {
.name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
.video_inputs = 4,
- .audio_inputs = 3,
- .tuner = 0,
+ /* .audio_inputs= 3, */
.svhs = 2,
.gpiomask = 7,
- .muxsel = { 2, 3, 1, 1 }, /* Tuner, SVid, SVHS, SVid to SVHS connector */
+ /* Tuner, SVid, SVHS, SVid to SVHS connector */
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
* This card lacks external Audio In, so we mute it on Ext. & Int.
* The PCB can take a sbx1637/sbx1673, wiring unknown.
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
/* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
radio signal strength indicators work fine. */
.has_radio = 1,
/* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
.name = "DSP Design TCVIDEO",
.video_inputs = 4,
- .svhs = UNSET,
- .muxsel = { 2, 3, 1, 0 },
+ .svhs = NO_SVHS,
+ .muxsel = MUXSEL(2, 3, 1, 0),
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
/* ---- card 0x50 ---------------------------------- */
[BTTV_BOARD_HAUPPAUGEPVR] = {
.name = "Hauppauge WinTV PVR",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
- .muxsel = { 2, 0, 1, 1 },
+ .muxsel = MUXSEL(2, 0, 1, 1),
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.gpiomask = 7,
.gpiomux = {7},
[BTTV_BOARD_GVBCTV5PCI] = {
.name = "IODATA GV-BCTV5/PCI",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x0f0f80,
- .muxsel = {2, 3, 1, 0 },
+ .muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = {0x030000, 0x010000, 0, 0 },
.gpiomute = 0x020000,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC_M,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.audio_mode_gpio= gvbctv5pci_audio,
.has_radio = 1,
},
[BTTV_BOARD_OSPREY1x0] = {
.name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
.video_inputs = 4, /* id-inputs-clock */
- .audio_inputs = 0,
- .tuner = UNSET,
+ /* .audio_inputs= 0, */
.svhs = 3,
- .muxsel = { 3, 2, 0, 1 },
+ .muxsel = MUXSEL(3, 2, 0, 1),
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
[BTTV_BOARD_OSPREY1x0_848] = {
.name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
.video_inputs = 3,
- .audio_inputs = 0,
- .tuner = UNSET,
+ /* .audio_inputs= 0, */
.svhs = 2,
- .muxsel = { 2, 3, 1 },
+ .muxsel = MUXSEL(2, 3, 1),
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
[BTTV_BOARD_OSPREY101_848] = {
.name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
.video_inputs = 2,
- .audio_inputs = 0,
- .tuner = UNSET,
+ /* .audio_inputs= 0, */
.svhs = 1,
- .muxsel = { 3, 1 },
+ .muxsel = MUXSEL(3, 1),
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
[BTTV_BOARD_OSPREY1x1] = {
.name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
.video_inputs = 1,
- .audio_inputs = 0,
- .tuner = UNSET,
- .svhs = UNSET,
- .muxsel = { 0 },
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .muxsel = MUXSEL(0),
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
[BTTV_BOARD_OSPREY1x1_SVID] = {
.name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
.video_inputs = 2,
- .audio_inputs = 0,
- .tuner = UNSET,
+ /* .audio_inputs= 0, */
.svhs = 1,
- .muxsel = { 0, 1 },
+ .muxsel = MUXSEL(0, 1),
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
[BTTV_BOARD_OSPREY2xx] = {
.name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
.video_inputs = 1,
- .audio_inputs = 1,
- .tuner = UNSET,
- .svhs = UNSET,
- .muxsel = { 0 },
+ /* .audio_inputs= 1, */
+ .svhs = NO_SVHS,
+ .muxsel = MUXSEL(0),
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
[BTTV_BOARD_OSPREY2x0_SVID] = {
.name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
.video_inputs = 2,
- .audio_inputs = 1,
- .tuner = UNSET,
+ /* .audio_inputs= 1, */
.svhs = 1,
- .muxsel = { 0, 1 },
+ .muxsel = MUXSEL(0, 1),
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
[BTTV_BOARD_OSPREY2x0] = {
.name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
.video_inputs = 2,
- .audio_inputs = 1,
- .tuner = UNSET,
+ /* .audio_inputs= 1, */
.svhs = 1,
- .muxsel = { 2, 3 },
+ .muxsel = MUXSEL(2, 3),
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
[BTTV_BOARD_OSPREY500] = {
.name = "Osprey 500", /* 500 */
.video_inputs = 2,
- .audio_inputs = 1,
- .tuner = UNSET,
+ /* .audio_inputs= 1, */
.svhs = 1,
- .muxsel = { 2, 3 },
+ .muxsel = MUXSEL(2, 3),
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
[BTTV_BOARD_OSPREY540] = {
.name = "Osprey 540", /* 540 */
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = UNSET,
+ /* .audio_inputs= 1, */
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
[BTTV_BOARD_OSPREY2000] = {
.name = "Osprey 2000", /* 2000 */
.video_inputs = 2,
- .audio_inputs = 1,
- .tuner = UNSET,
+ /* .audio_inputs= 1, */
.svhs = 1,
- .muxsel = { 2, 3 },
+ .muxsel = MUXSEL(2, 3),
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
/* M G Berberich <berberic@forwiss.uni-passau.de> */
.name = "IDS Eagle",
.video_inputs = 4,
- .audio_inputs = 0,
- .tuner = UNSET,
- .tuner_type = UNSET,
+ /* .audio_inputs= 0, */
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
- .svhs = UNSET,
+ .svhs = NO_SVHS,
.gpiomask = 0,
- .muxsel = { 0, 1, 2, 3 },
+ .muxsel = MUXSEL(2, 2, 2, 2),
.muxsel_hook = eagle_muxsel,
.no_msp34xx = 1,
.no_tda9875 = 1,
[BTTV_BOARD_PINNACLESAT] = {
.name = "Pinnacle PCTV Sat",
.video_inputs = 2,
- .audio_inputs = 0,
+ /* .audio_inputs= 0, */
.svhs = 1,
- .tuner = UNSET,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
- .muxsel = { 3, 1 },
+ .muxsel = MUXSEL(3, 1),
.pll = PLL_28,
.no_gpioirq = 1,
.has_dvb = 1,
[BTTV_BOARD_FORMAC_PROTV] = {
.name = "Formac ProTV II (bt878)",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 3,
.gpiomask = 2,
/* TV, Comp1, Composite over SVID con, SVID */
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 2, 0, 0 },
.pll = PLL_28,
.has_radio = 1,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
/* sound routing:
GPIO=0x00,0x01,0x03: mute (?)
0x02: both TV and radio (tuner: FM1216/I)
[BTTV_BOARD_MACHTV] = {
.name = "MachTV",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
- .svhs = UNSET,
+ /* .audio_inputs= 1, */
+ .svhs = NO_SVHS,
.gpiomask = 7,
- .muxsel = { 2, 3, 1, 1},
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 3},
.gpiomute = 4,
.needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.pll = PLL_28,
},
[BTTV_BOARD_EURESYS_PICOLO] = {
.name = "Euresys Picolo",
.video_inputs = 3,
- .audio_inputs = 0,
- .tuner = UNSET,
+ /* .audio_inputs= 0, */
.svhs = 2,
.gpiomask = 0,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
- .muxsel = { 2, 0, 1},
+ .muxsel = MUXSEL(2, 0, 1),
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_PV150] = {
/* Luc Van Hoeylandt <luc@e-magic.be> */
.name = "ProVideo PV150", /* 0x4f */
.video_inputs = 2,
- .audio_inputs = 0,
- .tuner = UNSET,
- .svhs = UNSET,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
.gpiomask = 0,
- .muxsel = { 2, 3 },
+ .muxsel = MUXSEL(2, 3),
.gpiomux = { 0 },
.needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_AD_TVK503] = {
/* Hiroshi Takekawa <sian@big.or.jp> */
/* This card lacks subsystem ID */
.name = "AD-TVK503", /* 0x63 */
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x001e8007,
- .muxsel = { 2, 3, 1, 0 },
+ .muxsel = MUXSEL(2, 3, 1, 0),
/* Tuner, Radio, external, internal, off, on */
.gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
.gpiomute = 0x0f,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.audio_mode_gpio= adtvk503_audio,
},
[BTTV_BOARD_HERCULES_SM_TV] = {
.name = "Hercules Smart TV Stereo",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x00,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
/* Notes:
- card lacks subsystem ID
- stereo variant w/ daughter board with tda9874a @0xb0
[BTTV_BOARD_PACETV] = {
.name = "Pace TV & Radio Card",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
- .muxsel = { 2, 3, 1, 1 }, /* Tuner, CVid, SVid, CVid over SVid connector */
+ /* Tuner, CVid, SVid, CVid over SVid connector */
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomask = 0,
.no_tda9875 = 1,
.no_tda7432 = 1,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.has_radio = 1,
.pll = PLL_28,
/* Bt878, Bt832, FI1246 tuner; no pci subsystem id
/* Chris Willing <chris@vislab.usyd.edu.au> */
.name = "IVC-200",
.video_inputs = 1,
- .audio_inputs = 0,
- .tuner = UNSET,
- .tuner_type = UNSET,
+ /* .audio_inputs= 0, */
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
- .svhs = UNSET,
+ .svhs = NO_SVHS,
.gpiomask = 0xdf,
- .muxsel = { 2 },
+ .muxsel = MUXSEL(2),
.pll = PLL_28,
},
[BTTV_BOARD_IVCE8784] = {
.name = "IVCE-8784",
.video_inputs = 1,
- .audio_inputs = 0,
- .tuner = UNSET,
- .tuner_type = UNSET,
+ /* .audio_inputs= 0, */
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
- .svhs = UNSET,
+ .svhs = NO_SVHS,
.gpiomask = 0xdf,
- .muxsel = { 2 },
+ .muxsel = MUXSEL(2),
.pll = PLL_28,
},
[BTTV_BOARD_XGUARD] = {
.name = "Grand X-Guard / Trust 814PCI",
.video_inputs = 16,
- .audio_inputs = 0,
- .tuner = UNSET,
- .svhs = UNSET,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.gpiomask2 = 0xff,
- .muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
+ .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
.muxsel_hook = xguard_muxsel,
.no_msp34xx = 1,
.no_tda9875 = 1,
[BTTV_BOARD_NEBULA_DIGITV] = {
.name = "Nebula Electronics DigiTV",
.video_inputs = 1,
- .tuner = UNSET,
- .svhs = UNSET,
- .muxsel = { 2, 3, 1, 0 },
+ .svhs = NO_SVHS,
+ .muxsel = MUXSEL(2, 3, 1, 0),
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.has_dvb = 1,
.has_remote = 1,
.gpiomask = 0x1b,
/* Jorge Boncompte - DTI2 <jorge@dti2.net> */
.name = "ProVideo PV143",
.video_inputs = 4,
- .audio_inputs = 0,
- .tuner = UNSET,
- .svhs = UNSET,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
.gpiomask = 0,
- .muxsel = { 2, 3, 1, 0 },
+ .muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0 },
.needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
/* M.Klahr@phytec.de */
.name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
.video_inputs = 4,
- .audio_inputs = 0,
- .tuner = UNSET, /* card has no tuner */
+ /* .audio_inputs= 0, */
.svhs = 3,
.gpiomask = 0x00,
- .muxsel = { 2, 3, 1, 0 },
+ .muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.needs_tvaudio = 0,
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_VD009X1_VD011_COMBI] = {
.name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
.video_inputs = 4,
- .audio_inputs = 0,
- .tuner = UNSET, /* card has no tuner */
+ /* .audio_inputs= 0, */
.svhs = 3,
.gpiomask = 0x00,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.needs_tvaudio = 0,
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
/* ---- card 0x6c ---------------------------------- */
[BTTV_BOARD_VD009_MINIDIN] = {
.name = "PHYTEC VD-009 MiniDIN (bt878)",
.video_inputs = 10,
- .audio_inputs = 0,
- .tuner = UNSET, /* card has no tuner */
+ /* .audio_inputs= 0, */
.svhs = 9,
.gpiomask = 0x00,
- .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
- via the upper nibble of muxsel. here: used for
- xternal video-mux */
- .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
+ .gpiomask2 = 0x03, /* used for external vodeo mux */
+ .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
+ .muxsel_hook = phytec_muxsel,
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.needs_tvaudio = 1,
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_VD009_COMBI] = {
.name = "PHYTEC VD-009 Combi (bt878)",
.video_inputs = 10,
- .audio_inputs = 0,
- .tuner = UNSET, /* card has no tuner */
+ /* .audio_inputs= 0, */
.svhs = 9,
.gpiomask = 0x00,
- .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
- via the upper nibble of muxsel. here: used for
- xternal video-mux */
- .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
+ .gpiomask2 = 0x03, /* used for external vodeo mux */
+ .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
+ .muxsel_hook = phytec_muxsel,
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.needs_tvaudio = 1,
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_IVC100] = {
.name = "IVC-100",
.video_inputs = 4,
- .audio_inputs = 0,
- .tuner = UNSET,
- .tuner_type = UNSET,
+ /* .audio_inputs= 0, */
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
- .svhs = UNSET,
+ .svhs = NO_SVHS,
.gpiomask = 0xdf,
- .muxsel = { 2, 3, 1, 0 },
+ .muxsel = MUXSEL(2, 3, 1, 0),
.pll = PLL_28,
},
[BTTV_BOARD_IVC120] = {
/* IVC-120G - Alan Garfield <alan@fromorbit.com> */
.name = "IVC-120G",
.video_inputs = 16,
- .audio_inputs = 0, /* card has no audio */
- .tuner = UNSET, /* card has no tuner */
- .tuner_type = UNSET,
+ /* .audio_inputs= 0, */
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
- .svhs = UNSET, /* card has no svhs */
+ .svhs = NO_SVHS, /* card has no svhs */
.needs_tvaudio = 0,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.gpiomask = 0x00,
- .muxsel = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
- 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
+ .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
.muxsel_hook = ivc120_muxsel,
.pll = PLL_28,
},
[BTTV_BOARD_PC_HDTV] = {
.name = "pcHDTV HD-2000 TV",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
- .muxsel = { 2, 3, 1, 0 },
+ .muxsel = MUXSEL(2, 3, 1, 0),
.tuner_type = TUNER_PHILIPS_FCV1236D,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.has_dvb = 1,
},
[BTTV_BOARD_TWINHAN_DST] = {
.no_tda7432 = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.no_video = 1,
.has_dvb = 1,
},
[BTTV_BOARD_WINFASTVC100] = {
.name = "Winfast VC100",
.video_inputs = 3,
- .audio_inputs = 0,
+ /* .audio_inputs= 0, */
.svhs = 1,
- .tuner = UNSET,
- .muxsel = { 3, 1, 1, 3 }, /* Vid In, SVid In, Vid over SVid in connector */
+ /* Vid In, SVid In, Vid over SVid in connector */
+ .muxsel = MUXSEL(3, 1, 1, 3),
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.pll = PLL_28,
},
[BTTV_BOARD_TEV560] = {
.name = "Teppro TEV-560/InterVision IV-560",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 3,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 1, 1, 1 },
.needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.pll = PLL_35,
},
[BTTV_BOARD_SIMUS_GVC1100] = {
.name = "SIMUS GVC1100",
.video_inputs = 4,
- .audio_inputs = 0,
- .tuner = UNSET,
- .svhs = UNSET,
- .tuner_type = UNSET,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.pll = PLL_28,
- .muxsel = { 2, 2, 2, 2 },
+ .muxsel = MUXSEL(2, 2, 2, 2),
.gpiomask = 0x3F,
.muxsel_hook = gvc1100_muxsel,
},
/* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
.name = "NGS NGSTV+",
.video_inputs = 3,
- .tuner = 0,
.svhs = 2,
.gpiomask = 0x008007,
- .muxsel = { 2, 3, 0, 0 },
+ .muxsel = MUXSEL(2, 3, 0, 0),
.gpiomux = { 0, 0, 0, 0 },
.gpiomute = 0x000003,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.has_remote = 1,
},
[BTTV_BOARD_LMLBT4] = {
/* http://linuxmedialabs.com */
.name = "LMLBT4",
.video_inputs = 4, /* IN1,IN2,IN3,IN4 */
- .audio_inputs = 0,
- .tuner = UNSET,
- .svhs = UNSET,
- .muxsel = { 2, 3, 1, 0 },
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .muxsel = MUXSEL(2, 3, 1, 0),
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.needs_tvaudio = 0,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_TEKRAM_M205] = {
/* Helmroos Harri <harri.helmroos@pp.inet.fi> */
.name = "Tekram M205 PRO",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.svhs = 2,
.needs_tvaudio = 0,
.gpiomask = 0x68,
- .muxsel = { 2, 3, 1 },
+ .muxsel = MUXSEL(2, 3, 1),
.gpiomux = { 0x68, 0x68, 0x61, 0x61 },
.pll = PLL_28,
},
/* bt878 TV + FM without subsystem ID */
.name = "Conceptronic CONTVFMi",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x008007,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 3,
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.has_remote = 1,
.has_radio = 1,
},
/*0x79 in bttv.h*/
.name = "Euresys Picolo Tetra",
.video_inputs = 4,
- .audio_inputs = 0,
- .tuner = UNSET,
- .svhs = UNSET,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
.gpiomask = 0,
.gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
- .muxsel = {2,2,2,2},/*878A input is always MUX0, see above.*/
+ /*878A input is always MUX0, see above.*/
+ .muxsel = MUXSEL(2, 2, 2, 2),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.pll = PLL_28,
.needs_tvaudio = 0,
.muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_SPIRIT_TV] = {
/* Spirit TV Tuner from http://spiritmodems.com.au */
/* Stafford Goodsell <surge@goliath.homeunix.org> */
.name = "Spirit TV Tuner",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x0000000f,
- .muxsel = { 2, 1, 1 },
+ .muxsel = MUXSEL(2, 1, 1),
.gpiomux = { 0x02, 0x00, 0x00, 0x00 },
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
},
.name = "AVerMedia AVerTV DVB-T 771",
.video_inputs = 2,
.svhs = 1,
- .tuner = UNSET,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
- .muxsel = { 3 , 3 },
+ .muxsel = MUXSEL(3, 3),
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
/* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
.name = "AverMedia AverTV DVB-T 761",
.video_inputs = 2,
- .tuner = UNSET,
.svhs = 1,
- .muxsel = { 3, 1, 2, 0 }, /* Comp0, S-Video, ?, ? */
+ .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.has_dvb = 1,
.no_gpioirq = 1,
.has_remote = 1,
},
[BTTV_BOARD_MATRIX_VISIONSQ] = {
/* andre.schwarz@matrix-vision.de */
- .name = "MATRIX Vision Sigma-SQ",
- .video_inputs = 16,
- .audio_inputs = 0,
- .tuner = UNSET,
- .svhs = UNSET,
- .gpiomask = 0x0,
- .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2,
- 3, 3, 3, 3, 3, 3, 3, 3 },
- .muxsel_hook = sigmaSQ_muxsel,
- .gpiomux = { 0 },
- .no_msp34xx = 1,
- .pll = PLL_28,
- .tuner_type = UNSET,
- .tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
+ .name = "MATRIX Vision Sigma-SQ",
+ .video_inputs = 16,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .gpiomask = 0x0,
+ .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
+ .muxsel_hook = sigmaSQ_muxsel,
+ .gpiomux = { 0 },
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_MATRIX_VISIONSLC] = {
/* andre.schwarz@matrix-vision.de */
- .name = "MATRIX Vision Sigma-SLC",
- .video_inputs = 4,
- .audio_inputs = 0,
- .tuner = UNSET,
- .svhs = UNSET,
- .gpiomask = 0x0,
- .muxsel = { 2, 2, 2, 2 },
- .muxsel_hook = sigmaSLC_muxsel,
- .gpiomux = { 0 },
- .no_msp34xx = 1,
- .pll = PLL_28,
- .tuner_type = UNSET,
- .tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
+ .name = "MATRIX Vision Sigma-SLC",
+ .video_inputs = 4,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .gpiomask = 0x0,
+ .muxsel = MUXSEL(2, 2, 2, 2),
+ .muxsel_hook = sigmaSLC_muxsel,
+ .gpiomux = { 0 },
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
},
/* BTTV_BOARD_APAC_VIEWCOMP */
[BTTV_BOARD_APAC_VIEWCOMP] = {
/* bt878 TV + FM 0x00000000 subsystem ID */
.name = "APAC Viewcomp 878(AMAX)",
.video_inputs = 2,
- .audio_inputs = 1,
- .tuner = 0,
- .svhs = UNSET,
+ /* .audio_inputs= 1, */
+ .svhs = NO_SVHS,
.gpiomask = 0xFF,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
.has_radio = 1, /* not every card has radio */
},
[BTTV_BOARD_DVICO_DVBT_LITE] = {
/* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
.name = "DViCO FusionHDTV DVB-T Lite",
- .tuner = UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.pll = PLL_28,
.no_video = 1,
.has_dvb = 1,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_VGEAR_MYVCD] = {
/* Steven <photon38@pchome.com.tw> */
.name = "V-Gear MyVCD",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x3f,
- .muxsel = {2, 3, 1, 0 },
+ .muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = {0x31, 0x31, 0x31, 0x31 },
.gpiomute = 0x31,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC_M,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.has_radio = 0,
},
[BTTV_BOARD_SUPER_TV] = {
/* Rick C <cryptdragoon@gmail.com> */
.name = "Super TV Tuner",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
- .muxsel = { 2, 3, 1, 0 },
+ .muxsel = MUXSEL(2, 3, 1, 0),
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.gpiomask = 0x008007,
.gpiomux = { 0, 0x000001,0,0 },
.needs_tvaudio = 1,
/* Chris Fanning <video4linux@haydon.net> */
.name = "Tibet Systems 'Progress DVR' CS16",
.video_inputs = 16,
- .audio_inputs = 0,
- .tuner = UNSET,
- .svhs = UNSET,
- .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
.pll = PLL_28,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.muxsel_hook = tibetCS16_muxsel,
},
[BTTV_BOARD_KODICOM_4400R] = {
*/
.name = "Kodicom 4400R (master)",
.video_inputs = 16,
- .audio_inputs = 0,
- .tuner = UNSET,
- .tuner_type = UNSET,
+ /* .audio_inputs= 0, */
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
- .svhs = UNSET,
+ .svhs = NO_SVHS,
/* GPIO bits 0-9 used for analog switch:
* 00 - 03: camera selector
* 04 - 06: channel (controller) selector
*/
.gpiomask = 0x0003ff,
.no_gpioirq = 1,
- .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
+ .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
.pll = PLL_28,
.no_msp34xx = 1,
.no_tda7432 = 1,
*/
.name = "Kodicom 4400R (slave)",
.video_inputs = 16,
- .audio_inputs = 0,
- .tuner = UNSET,
- .tuner_type = UNSET,
+ /* .audio_inputs= 0, */
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
- .svhs = UNSET,
+ .svhs = NO_SVHS,
.gpiomask = 0x010000,
.no_gpioirq = 1,
- .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
+ .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
.pll = PLL_28,
.no_msp34xx = 1,
.no_tda7432 = 1,
/* Adlink RTV24 with special unlock codes */
.name = "Adlink RTV24",
.video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
- .muxsel = { 2, 3, 1, 0 },
+ .muxsel = MUXSEL(2, 3, 1, 0),
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.pll = PLL_28,
},
/* ---- card 0x87---------------------------------- */
[BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
/* Michael Krufky <mkrufky@m1k.net> */
.name = "DViCO FusionHDTV 5 Lite",
- .tuner = 0,
.tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.video_inputs = 3,
- .audio_inputs = 1,
+ /* .audio_inputs= 1, */
.svhs = 2,
- .muxsel = { 2, 3, 1 },
+ .muxsel = MUXSEL(2, 3, 1),
.gpiomask = 0x00e00007,
.gpiomux = { 0x00400005, 0, 0x00000001, 0 },
.gpiomute = 0x00c00007,
/* Mauro Carvalho Chehab <mchehab@infradead.org> */
.name = "Acorp Y878F",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x01fe00,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
.gpiomute = 0x002000,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
.tuner_addr = 0xc1 >>1,
- .radio_addr = 0xc1 >>1,
.has_radio = 1,
},
/* ---- card 0x89 ---------------------------------- */
[BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
.name = "Conceptronic CTVFMi v2",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x001c0007,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 3,
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TENA_9533_DI,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.has_remote = 1,
.has_radio = 1,
},
/* ---- card 0x8a ---------------------------------- */
[BTTV_BOARD_PV_BT878P_2E] = {
- .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
- .video_inputs = 5,
- .audio_inputs = 1,
- .tuner = 0,
- .svhs = 3,
- .gpiomask = 0x01fe00,
- .muxsel = { 2,3,1,1,-1 },
- .digital_mode = DIGITAL_MODE_CAMERA,
- .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 },
- .gpiomute = 0x12400,
- .no_msp34xx = 1,
- .pll = PLL_28,
- .tuner_type = TUNER_LG_PAL_FM,
- .tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
- .has_remote = 1,
+ .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
+ .video_inputs = 5,
+ /* .audio_inputs= 1, */
+ .svhs = 3,
+ .has_dig_in = 1,
+ .gpiomask = 0x01fe00,
+ .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
+ /* .digital_mode= DIGITAL_MODE_CAMERA, */
+ .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 },
+ .gpiomute = 0x12400,
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_LG_PAL_FM,
+ .tuner_addr = ADDR_UNSET,
+ .has_remote = 1,
},
/* ---- card 0x8b ---------------------------------- */
[BTTV_BOARD_PV_M4900] = {
/* Sérgio Fortier <sergiofortier@yahoo.com.br> */
.name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x3f,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x21, 0x20, 0x24, 0x2c },
.gpiomute = 0x29,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_YMEC_TVF_5533MF,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.has_radio = 1,
.has_remote = 1,
},
[BTTV_BOARD_OSPREY440] = {
.name = "Osprey 440",
.video_inputs = 4,
- .audio_inputs = 2, /* this is meaningless */
- .tuner = UNSET,
- .svhs = UNSET,
- .muxsel = { 2, 3, 0, 1 }, /* 3,0,1 are guesses */
+ /* .audio_inputs= 2, */
+ .svhs = NO_SVHS,
+ .muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
.gpiomask = 0x303,
.gpiomute = 0x000, /* int + 32kHz */
.gpiomux = { 0, 0, 0x000, 0x100},
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
[BTTV_BOARD_ASOUND_SKYEYE] = {
.name = "Asound Skyeye PCTV",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 15,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 1,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
/* ---- card 0x8e ---------------------------------- */
[BTTV_BOARD_SABRENT_TVFM] = {
.name = "Sabrent TV-FM (bttv version)",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x108007,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 100000, 100002, 100002, 100000 },
.no_msp34xx = 1,
.no_tda9875 = 1,
[BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
.name = "Hauppauge ImpactVCB (bt878)",
.video_inputs = 4,
- .audio_inputs = 0,
- .tuner = UNSET,
- .svhs = UNSET,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
.gpiomask = 0x0f, /* old: 7 */
- .muxsel = { 0, 1, 3, 2 }, /* Composite 0-3 */
+ .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_MACHTV_MAGICTV] = {
/* Julian Calaby <julian.calaby@gmail.com>
.name = "MagicTV", /* rebranded MachTV */
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 7,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
.tuner_type = TUNER_TEMIC_4009FR5_PAL,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
.has_remote = 1,
[BTTV_BOARD_SSAI_SECURITY] = {
.name = "SSAI Security Video Interface",
.video_inputs = 4,
- .audio_inputs = 0,
- .tuner = UNSET,
- .svhs = UNSET,
- .muxsel = { 0, 1, 2, 3 },
- .tuner_type = UNSET,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .muxsel = MUXSEL(0, 1, 2, 3),
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_SSAI_ULTRASOUND] = {
.name = "SSAI Ultrasound Video Interface",
.video_inputs = 2,
- .audio_inputs = 0,
- .tuner = UNSET,
+ /* .audio_inputs= 0, */
.svhs = 1,
- .muxsel = { 2, 0, 1, 3 },
- .tuner_type = UNSET,
+ .muxsel = MUXSEL(2, 0, 1, 3),
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
/* ---- card 0x94---------------------------------- */
[BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
.name = "DViCO FusionHDTV 2",
- .tuner = 0,
.tuner_type = TUNER_PHILIPS_FCV1236D,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.video_inputs = 3,
- .audio_inputs = 1,
+ /* .audio_inputs= 1, */
.svhs = 2,
- .muxsel = { 2, 3, 1 },
+ .muxsel = MUXSEL(2, 3, 1),
.gpiomask = 0x00e00007,
.gpiomux = { 0x00400005, 0, 0x00000001, 0 },
.gpiomute = 0x00c00007,
[BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
.name = "Typhoon TV-Tuner PCI (50684)",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x3014f,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20001,0x10001, 0, 0 },
.gpiomute = 10,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_GEOVISION_GV600] = {
/* emhn@usb.ve */
- .name = "Geovision GV-600",
- .video_inputs = 16,
- .audio_inputs = 0,
- .tuner = UNSET,
- .svhs = UNSET,
- .gpiomask = 0x0,
- .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2 },
- .muxsel_hook = geovision_muxsel,
- .gpiomux = { 0 },
- .no_msp34xx = 1,
- .pll = PLL_28,
- .tuner_type = UNSET,
- .tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
+ .name = "Geovision GV-600",
+ .video_inputs = 16,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .gpiomask = 0x0,
+ .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
+ .muxsel_hook = geovision_muxsel,
+ .gpiomux = { 0 },
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_KOZUMI_KTV_01C] = {
/* Mauro Lacy <mauro@lacy.com.ar>
.name = "Kozumi KTV-01C",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x008007,
- .muxsel = { 2, 3, 1, 1 },
+ .muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */
.gpiomute = 3, /* CONTVFMi */
.needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
.has_remote = 1,
Mauro Carvalho Chehab <mchehab@infradead.org */
.name = "Encore ENL TV-FM-2",
.video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
+ /* .audio_inputs= 1, */
.svhs = 2,
/* bit 6 -> IR disabled
bit 18/17 = 00 -> mute
11 -> internal audio input
*/
.gpiomask = 0x060040,
- .muxsel = { 2, 3, 3 },
+ .muxsel = MUXSEL(2, 3, 3),
.gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 },
.gpiomute = 0,
.tuner_type = TUNER_TCL_MF02GIP_5N,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
.has_remote = 1,
/* D.Heer@Phytec.de */
.name = "PHYTEC VD-012 (bt878)",
.video_inputs = 4,
- .audio_inputs = 0,
- .tuner = UNSET, /* card has no tuner */
- .svhs = UNSET, /* card has no s-video */
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
.gpiomask = 0x00,
- .muxsel = { 0, 2, 3, 1 },
+ .muxsel = MUXSEL(0, 2, 3, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.needs_tvaudio = 0,
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_VD012_X1] = {
/* D.Heer@Phytec.de */
.name = "PHYTEC VD-012-X1 (bt878)",
.video_inputs = 4,
- .audio_inputs = 0,
- .tuner = UNSET, /* card has no tuner */
+ /* .audio_inputs= 0, */
.svhs = 3,
.gpiomask = 0x00,
- .muxsel = { 2, 3, 1 },
+ .muxsel = MUXSEL(2, 3, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.needs_tvaudio = 0,
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
},
[BTTV_BOARD_VD012_X2] = {
/* D.Heer@Phytec.de */
.name = "PHYTEC VD-012-X2 (bt878)",
.video_inputs = 4,
- .audio_inputs = 0,
- .tuner = UNSET, /* card has no tuner */
+ /* .audio_inputs= 0, */
.svhs = 3,
.gpiomask = 0x00,
- .muxsel = { 3, 2, 1 },
+ .muxsel = MUXSEL(3, 2, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.needs_tvaudio = 0,
.pll = PLL_28,
- .tuner_type = UNSET,
+ .tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
- }
+ },
+ [BTTV_BOARD_GEOVISION_GV800S] = {
+ /* Bruno Christo <bchristo@inf.ufsm.br>
+ *
+ * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
+ * 1 audio input per BT878A = 4 audio inputs
+ * 4 video inputs per BT878A = 16 video inputs
+ * This is the first BT878A chip of the GV-800(S). It's the
+ * "master" chip and it controls the video inputs through an
+ * analog multiplexer (a CD22M3494) via some GPIO pins. The
+ * slaves should use card type 0x9e (following this one).
+ * There is a EEPROM on the card which is currently not handled.
+ * The audio input is not working yet.
+ */
+ .name = "Geovision GV-800(S) (master)",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .svhs = NO_SVHS,
+ .gpiomask = 0xf107f,
+ .no_gpioirq = 1,
+ .muxsel = MUXSEL(2, 2, 2, 2),
+ .pll = PLL_28,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .no_tda9875 = 1,
+ .muxsel_hook = gv800s_muxsel,
+ },
+ [BTTV_BOARD_GEOVISION_GV800S_SL] = {
+ /* Bruno Christo <bchristo@inf.ufsm.br>
+ *
+ * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
+ * 1 audio input per BT878A = 4 audio inputs
+ * 4 video inputs per BT878A = 16 video inputs
+ * The 3 other BT878A chips are "slave" chips of the GV-800(S)
+ * and should use this card type.
+ * The audio input is not working yet.
+ */
+ .name = "Geovision GV-800(S) (slave)",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .svhs = NO_SVHS,
+ .gpiomask = 0x00,
+ .no_gpioirq = 1,
+ .muxsel = MUXSEL(2, 2, 2, 2),
+ .pll = PLL_28,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .no_tda9875 = 1,
+ .muxsel_hook = gv800s_muxsel,
+ },
+ [BTTV_BOARD_PV183] = {
+ .name = "ProVideo PV183", /* 0x9f */
+ .video_inputs = 2,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .gpiomask = 0,
+ .muxsel = MUXSEL(2, 3),
+ .gpiomux = { 0 },
+ .needs_tvaudio = 0,
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
};
static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
btv->c.nr, btv->cardid & 0xffff,
(btv->cardid >> 16) & 0xffff);
printk(KERN_DEBUG "please mail id, board name and "
- "the correct card= insmod option to video4linux-list@redhat.com\n");
+ "the correct card= insmod option to linux-media@vger.kernel.org\n");
}
}
* has its own multiplexer */
static void eagle_muxsel(struct bttv *btv, unsigned int input)
{
- btaor((2)<<5, ~(3<<5), BT848_IFORM);
- gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
+ gpio_bits(3, input & 3);
/* composite */
/* set chroma ADC to sleep */
case BTTV_BOARD_KODICOM_4400R:
kodicom4400r_init(btv);
break;
+ case BTTV_BOARD_GEOVISION_GV800S:
+ gv800s_init(btv);
+ break;
}
/* pll configuration */
addr = bttv_tvcards[btv->c.type].tuner_addr;
if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
- if(UNSET == btv->tuner_type)
+ if (UNSET == btv->tuner_type)
btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
if (UNSET != tuner[btv->c.nr])
btv->tuner_type = tuner[btv->c.nr];
- if (btv->tuner_type == TUNER_ABSENT ||
- bttv_tvcards[btv->c.type].tuner == UNSET)
+ if (btv->tuner_type == TUNER_ABSENT)
printk(KERN_INFO "bttv%d: tuner absent\n", btv->c.nr);
else if(btv->tuner_type == UNSET)
printk(KERN_WARNING "bttv%d: tuner type unset\n", btv->c.nr);
printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
btv->tuner_type);
- if (btv->tuner_type != UNSET) {
+ if (autoload != UNSET) {
+ printk(KERN_WARNING "bttv%d: the autoload option is obsolete.\n", btv->c.nr);
+ printk(KERN_WARNING "bttv%d: use option msp3400, tda7432 or tvaudio to\n", btv->c.nr);
+ printk(KERN_WARNING "bttv%d: override which audio module should be used.\n", btv->c.nr);
+ }
+
+ if (UNSET == btv->tuner_type)
+ btv->tuner_type = TUNER_ABSENT;
+
+ if (btv->tuner_type != TUNER_ABSENT) {
struct tuner_setup tun_setup;
+ /* Load tuner module before issuing tuner config call! */
+ if (bttv_tvcards[btv->c.type].has_radio)
+ v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tuner", "tuner",
+ v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+ v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tuner", "tuner",
+ v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+ v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tuner", "tuner",
+ v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
+
tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
tun_setup.type = btv->tuner_type;
tun_setup.addr = addr;
- bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
+ if (bttv_tvcards[btv->c.type].has_radio)
+ tun_setup.mode_mask |= T_RADIO;
+
+ bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
}
if (btv->tda9887_conf) {
tda9887_cfg.tuner = TUNER_TDA9887;
tda9887_cfg.priv = &btv->tda9887_conf;
- bttv_call_i2c_clients(btv, TUNER_SET_CONFIG, &tda9887_cfg);
+ bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
}
- btv->svhs = bttv_tvcards[btv->c.type].svhs;
+ btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
+ bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
+ btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
+ UNSET : bttv_tvcards[btv->c.type].svhs;
if (svhs[btv->c.nr] != UNSET)
btv->svhs = svhs[btv->c.nr];
if (remote[btv->c.nr] != UNSET)
if (bttv_tvcards[btv->c.type].audio_mode_gpio)
btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio;
- if (!autoload)
- return;
-
- if (bttv_tvcards[btv->c.type].tuner == UNSET)
+ if (btv->tuner_type == TUNER_ABSENT)
return; /* no tuner or related drivers to load */
+ if (btv->has_saa6588 || saa6588[btv->c.nr]) {
+ /* Probe for RDS receiver chip */
+ static const unsigned short addrs[] = {
+ 0x20 >> 1,
+ 0x22 >> 1,
+ I2C_CLIENT_END
+ };
+ struct v4l2_subdev *sd;
+
+ sd = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "saa6588", "saa6588", addrs);
+ btv->has_saa6588 = (sd != NULL);
+ }
+
/* try to detect audio/fader chips */
- if (!bttv_tvcards[btv->c.type].no_msp34xx &&
- bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
- request_module("msp3400");
- if (bttv_tvcards[btv->c.type].msp34xx_alt &&
- bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
- request_module("msp3400");
+ /* First check if the user specified the audio chip via a module
+ option. */
+
+ switch (audiodev[btv->c.nr]) {
+ case -1:
+ return; /* do not load any audio module */
+
+ case 0: /* autodetect */
+ break;
+
+ case 1: {
+ /* The user specified that we should probe for msp3400 */
+ static const unsigned short addrs[] = {
+ I2C_ADDR_MSP3400 >> 1,
+ I2C_ADDR_MSP3400_ALT >> 1,
+ I2C_CLIENT_END
+ };
+
+ btv->sd_msp34xx = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "msp3400", "msp3400", addrs);
+ if (btv->sd_msp34xx)
+ return;
+ goto no_audio;
+ }
+
+ case 2: {
+ /* The user specified that we should probe for tda7432 */
+ static const unsigned short addrs[] = {
+ I2C_ADDR_TDA7432 >> 1,
+ I2C_CLIENT_END
+ };
+
+ if (v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tda7432", "tda7432", addrs))
+ return;
+ goto no_audio;
+ }
+
+ case 3: {
+ /* The user specified that we should probe for tvaudio */
+ btv->sd_tvaudio = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tvaudio", "tvaudio", tvaudio_addrs());
+ if (btv->sd_tvaudio)
+ return;
+ goto no_audio;
+ }
+
+ default:
+ printk(KERN_WARNING "bttv%d: unknown audiodev value!\n",
+ btv->c.nr);
+ return;
+ }
+
+ /* There were no overrides, so now we try to discover this through the
+ card definition */
+
+ /* probe for msp3400 first: this driver can detect whether or not
+ it really is a msp3400, so it will return NULL when the device
+ found is really something else (e.g. a tea6300). */
+ if (!bttv_tvcards[btv->c.type].no_msp34xx) {
+ btv->sd_msp34xx = v4l2_i2c_new_probed_subdev_addr(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "msp3400", "msp3400",
+ I2C_ADDR_MSP3400 >> 1);
+ } else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
+ btv->sd_msp34xx = v4l2_i2c_new_probed_subdev_addr(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "msp3400", "msp3400",
+ I2C_ADDR_MSP3400_ALT >> 1);
+ }
- if (!bttv_tvcards[btv->c.type].no_tda9875 &&
- bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
- request_module("tda9875");
+ /* If we found a msp34xx, then we're done. */
+ if (btv->sd_msp34xx)
+ return;
- if (!bttv_tvcards[btv->c.type].no_tda7432 &&
- bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
- request_module("tda7432");
+ /* it might also be a tda7432. */
+ if (!bttv_tvcards[btv->c.type].no_tda7432) {
+ static const unsigned short addrs[] = {
+ I2C_ADDR_TDA7432 >> 1,
+ I2C_CLIENT_END
+ };
- if (bttv_tvcards[btv->c.type].needs_tvaudio)
- request_module("tvaudio");
+ if (v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tda7432", "tda7432", addrs))
+ return;
+ }
- if (btv->tuner_type != UNSET && btv->tuner_type != TUNER_ABSENT)
- request_module("tuner");
+ /* Now see if we can find one of the tvaudio devices. */
+ btv->sd_tvaudio = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tvaudio", "tvaudio", tvaudio_addrs());
+ if (btv->sd_tvaudio)
+ return;
+
+no_audio:
+ printk(KERN_WARNING "bttv%d: audio absent, no audio device found!\n",
+ btv->c.nr);
}
printk("bttv%d: Terratec Active Radio Upgrade found.\n",
btv->c.nr);
btv->has_radio = 1;
+ btv->has_saa6588 = 1;
btv->has_matchbox = 1;
} else {
btv->has_radio = 0;
btv->has_remote ? "yes" : "no");
}
-/* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
-void bttv_tda9880_setnorm(struct bttv *btv, unsigned int norm)
+/*
+ * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880
+ * analog demod, which is not I2C controlled like the newer and more common
+ * TDA9887 series. Instead is has two tri-state input pins, S0 and S1,
+ * that control the IF for the video and audio. Apparently, bttv GPIO
+ * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I
+ * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
+ */
+u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
{
- /* fix up our card entry */
- if(norm==V4L2_STD_NTSC) {
- bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
- bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x957fff;
- bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
- bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomute=0x957fff;
- dprintk("bttv_tda9880_setnorm to NTSC\n");
- }
- else {
- bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff;
- bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x947fff;
- bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff;
- bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomute=0x947fff;
- dprintk("bttv_tda9880_setnorm to PAL\n");
+
+ if (btv->audio == TVAUDIO_INPUT_TUNER) {
+ if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
+ gpiobits |= 0x10000;
+ else
+ gpiobits &= ~0x10000;
}
- /* set GPIO according */
- gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
- bttv_tvcards[btv->c.type].gpiomux[btv->audio]);
+
+ gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
+ return gpiobits;
}
*/
static void rv605_muxsel(struct bttv *btv, unsigned int input)
{
+ static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
+ 0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
+
+ gpio_bits(0x07f, muxgpio[input]);
+
/* reset all conections */
gpio_bits(0x200,0x200);
mdelay(1);
mdelay(1);
/* create a new connection */
- gpio_bits(0x480,0x080);
gpio_bits(0x480,0x480);
mdelay(1);
gpio_bits(0x480,0x080);
bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
- /* Selects MUX0 for input on the 878 */
- btaor((0)<<5, ~(3<<5), BT848_IFORM);
+ /* 878's MUX0 is already selected for input via muxsel values */
}
printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
}
+static void phytec_muxsel(struct bttv *btv, unsigned int input)
+{
+ unsigned int mux = input % 4;
+
+ if (input == btv->svhs)
+ mux = 0;
+
+ gpio_bits(0x3, mux);
+}
+
+/*
+ * GeoVision GV-800(S) functions
+ * Bruno Christo <bchristo@inf.ufsm.br>
+*/
+
+/* This is a function to control the analog switch, which determines which
+ * camera is routed to which controller. The switch comprises an X-address
+ * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
+ * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
+ * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
+ * the switch. A STROBE bit (gpio bit 17) latches the data value into the
+ * specified address. There is also a chip select (gpio bit 16).
+ * The idea is to set the address and chip select together, bring
+ * STROBE high, write the data, and finally bring STROBE back to low.
+ */
+static void gv800s_write(struct bttv *btv,
+ unsigned char xaddr,
+ unsigned char yaddr,
+ unsigned char data) {
+ /* On the "master" 878A:
+ * GPIO bits 0-9 are used for the analog switch:
+ * 00 - 03: camera selector
+ * 04 - 06: 878A (controller) selector
+ * 16: cselect
+ * 17: strobe
+ * 18: data (1->on, 0->off)
+ * 19: reset
+ */
+ const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
+ const u32 CSELECT = 1<<16;
+ const u32 STROBE = 1<<17;
+ const u32 DATA = data<<18;
+
+ gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */
+ gpio_bits(0x20000, STROBE); /* STROBE high */
+ gpio_bits(0x40000, DATA); /* write DATA */
+ gpio_bits(0x20000, ~STROBE); /* STROBE low */
+}
+
+/*
+ * GeoVision GV-800(S) muxsel
+ *
+ * Each of the 4 cards (controllers) use this function.
+ * The controller using this function selects the input through the GPIO pins
+ * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
+ *
+ * The parameter 'input' is the requested camera number (0-4) on the controller.
+ * The map array has the address of each input. Note that the addresses in the
+ * array are in the sequence the original GeoVision driver uses, that is, set
+ * every controller to input 0, then to input 1, 2, 3, repeat. This means that
+ * the physical "camera 1" connector corresponds to controller 0 input 0,
+ * "camera 2" corresponds to controller 1 input 0, and so on.
+ *
+ * After getting the input address, the function then writes the appropriate
+ * data to the analog switch, and housekeeps the local copy of the switch
+ * information.
+ */
+static void gv800s_muxsel(struct bttv *btv, unsigned int input)
+{
+ struct bttv *mctlr;
+ char *sw_status;
+ int xaddr, yaddr;
+ static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
+ { 0x1, 0x5, 0xb, 0x7 },
+ { 0x2, 0x8, 0xc, 0xe },
+ { 0x3, 0x9, 0xd, 0xf } };
+ input = input%4;
+ mctlr = master[btv->c.nr];
+ if (mctlr == NULL) {
+ /* do nothing until the "master" is detected */
+ return;
+ }
+ yaddr = (btv->c.nr - mctlr->c.nr) & 3;
+ sw_status = (char *)(&mctlr->mbox_we);
+ xaddr = map[yaddr][input] & 0xf;
+
+ /* Check if the controller/camera pair has changed, ignore otherwise */
+ if (sw_status[yaddr] != xaddr) {
+ /* disable the old switch, enable the new one and save status */
+ gv800s_write(mctlr, sw_status[yaddr], yaddr, 0);
+ sw_status[yaddr] = xaddr;
+ gv800s_write(mctlr, xaddr, yaddr, 1);
+ }
+}
+
+/* GeoVision GV-800(S) "master" chip init */
+static void gv800s_init(struct bttv *btv)
+{
+ char *sw_status = (char *)(&btv->mbox_we);
+ int ix;
+
+ gpio_inout(0xf107f, 0xf107f);
+ gpio_write(1<<19); /* reset the analog MUX */
+ gpio_write(0);
+
+ /* Preset camera 0 to the 4 controllers */
+ for (ix = 0; ix < 4; ix++) {
+ sw_status[ix] = ix;
+ gv800s_write(btv, ix, ix, 1);
+ }
+
+ /* Inputs on the "master" controller need this brightness fix */
+ bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
+
+ if (btv->c.nr > BTTV_MAX-4)
+ return;
+ /*
+ * Store the "master" controller pointer in the master
+ * array for later use in the muxsel function.
+ */
+ master[btv->c.nr] = btv;
+ master[btv->c.nr+1] = btv;
+ master[btv->c.nr+2] = btv;
+ master[btv->c.nr+3] = btv;
+}
+
/* ----------------------------------------------------------------------- */
/* motherboard chipset specific stuff */
git.openpandora.org / pandora-kernel.git / blobdiff