#include "au0828.h"
#include "au0828-cards.h"
+#include "au8522.h"
+#include "media/tuner.h"
+#include "media/v4l2-common.h"
+
+void hvr950q_cs5340_audio(void *priv, int enable)
+{
+ /* Because the HVR-950q shares an i2s bus between the cs5340 and the
+ au8522, we need to hold cs5340 in reset when using the au8522 */
+ struct au0828_dev *dev = priv;
+ if (enable == 1)
+ au0828_set(dev, REG_000, 0x10);
+ else
+ au0828_clear(dev, REG_000, 0x10);
+}
struct au0828_board au0828_boards[] = {
[AU0828_BOARD_UNKNOWN] = {
.name = "Unknown board",
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
},
[AU0828_BOARD_HAUPPAUGE_HVR850] = {
.name = "Hauppauge HVR850",
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0x61,
+ .i2c_clk_divider = AU0828_I2C_CLK_30KHZ,
+ .input = {
+ {
+ .type = AU0828_VMUX_TELEVISION,
+ .vmux = AU8522_COMPOSITE_CH4_SIF,
+ .amux = AU8522_AUDIO_SIF,
+ },
+ {
+ .type = AU0828_VMUX_COMPOSITE,
+ .vmux = AU8522_COMPOSITE_CH1,
+ .amux = AU8522_AUDIO_NONE,
+ .audio_setup = hvr950q_cs5340_audio,
+ },
+ {
+ .type = AU0828_VMUX_SVIDEO,
+ .vmux = AU8522_SVIDEO_CH13,
+ .amux = AU8522_AUDIO_NONE,
+ .audio_setup = hvr950q_cs5340_audio,
+ },
+ },
},
[AU0828_BOARD_HAUPPAUGE_HVR950Q] = {
.name = "Hauppauge HVR950Q",
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0x61,
+ /* The au0828 hardware i2c implementation does not properly
+ support the xc5000's i2c clock stretching. So we need to
+ lower the clock frequency enough where the 15us clock
+ stretch fits inside of a normal clock cycle, or else the
+ au0828 fails to set the STOP bit. A 30 KHz clock puts the
+ clock pulse width at 18us */
+ .i2c_clk_divider = AU0828_I2C_CLK_30KHZ,
+ .input = {
+ {
+ .type = AU0828_VMUX_TELEVISION,
+ .vmux = AU8522_COMPOSITE_CH4_SIF,
+ .amux = AU8522_AUDIO_SIF,
+ },
+ {
+ .type = AU0828_VMUX_COMPOSITE,
+ .vmux = AU8522_COMPOSITE_CH1,
+ .amux = AU8522_AUDIO_NONE,
+ .audio_setup = hvr950q_cs5340_audio,
+ },
+ {
+ .type = AU0828_VMUX_SVIDEO,
+ .vmux = AU8522_SVIDEO_CH13,
+ .amux = AU8522_AUDIO_NONE,
+ .audio_setup = hvr950q_cs5340_audio,
+ },
+ },
},
[AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL] = {
.name = "Hauppauge HVR950Q rev xxF8",
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
},
[AU0828_BOARD_DVICO_FUSIONHDTV7] = {
.name = "DViCO FusionHDTV USB",
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
},
[AU0828_BOARD_HAUPPAUGE_WOODBURY] = {
.name = "Hauppauge Woodbury",
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
},
};
dprintk(1, "%s()\n", __func__);
- switch (dev->board) {
+ switch (dev->boardnr) {
case AU0828_BOARD_HAUPPAUGE_HVR850:
case AU0828_BOARD_HAUPPAUGE_HVR950Q:
case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
struct tveeprom tv;
tveeprom_hauppauge_analog(&dev->i2c_client, &tv, eeprom_data);
+ dev->board.tuner_type = tv.tuner_type;
/* Make sure we support the board model */
switch (tv.model) {
case 72000: /* WinTV-HVR950q (Retail, IR, ATSC/QAM */
- case 72001: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and basic analog video */
- case 72211: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */
- case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */
- case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */
- case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and basic analog video */
- case 72251: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and basic analog video */
- case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and basic analog video */
+ case 72001: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
+ case 72211: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
+ case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
+ case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
+ case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and analog video */
+ case 72251: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
+ case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and analog video */
case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */
break;
default:
void au0828_card_setup(struct au0828_dev *dev)
{
static u8 eeprom[256];
+ struct tuner_setup tun_setup;
+ struct v4l2_subdev *sd;
+ unsigned int mode_mask = T_ANALOG_TV |
+ T_DIGITAL_TV;
dprintk(1, "%s()\n", __func__);
+ memcpy(&dev->board, &au0828_boards[dev->boardnr], sizeof(dev->board));
+
if (dev->i2c_rc == 0) {
dev->i2c_client.addr = 0xa0 >> 1;
tveeprom_read(&dev->i2c_client, eeprom, sizeof(eeprom));
}
- switch (dev->board) {
+ switch (dev->boardnr) {
case AU0828_BOARD_HAUPPAUGE_HVR850:
case AU0828_BOARD_HAUPPAUGE_HVR950Q:
case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
hauppauge_eeprom(dev, eeprom+0xa0);
break;
}
+
+ if (AUVI_INPUT(0).type != AU0828_VMUX_UNDEFINED) {
+ /* Load the analog demodulator driver (note this would need to
+ be abstracted out if we ever need to support a different
+ demod) */
+ sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "au8522", "au8522", 0x8e >> 1);
+ if (sd == NULL)
+ printk(KERN_ERR "analog subdev registration failed\n");
+ }
+
+ /* Setup tuners */
+ if (dev->board.tuner_type != TUNER_ABSENT) {
+ /* Load the tuner module, which does the attach */
+ sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "tuner", "tuner", dev->board.tuner_addr);
+ if (sd == NULL)
+ printk(KERN_ERR "tuner subdev registration fail\n");
+
+ tun_setup.mode_mask = mode_mask;
+ tun_setup.type = dev->board.tuner_type;
+ tun_setup.addr = dev->board.tuner_addr;
+ tun_setup.tuner_callback = au0828_tuner_callback;
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr,
+ &tun_setup);
+ }
}
/*
{
dprintk(1, "%s()\n", __func__);
- switch (dev->board) {
+ switch (dev->boardnr) {
case AU0828_BOARD_HAUPPAUGE_HVR850:
case AU0828_BOARD_HAUPPAUGE_HVR950Q:
case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
* 4 - CS5340
* 5 - AU8522 Demodulator
* 6 - eeprom W/P
+ * 7 - power supply
* 9 - XC5000 Tuner
*/
/* Into reset */
au0828_write(dev, REG_003, 0x02);
- au0828_write(dev, REG_002, 0x88 | 0x20);
+ au0828_write(dev, REG_002, 0x80 | 0x20 | 0x10);
au0828_write(dev, REG_001, 0x0);
au0828_write(dev, REG_000, 0x0);
msleep(100);
- /* Out of reset */
+ /* Out of reset (leave the cs5340 in reset until needed) */
au0828_write(dev, REG_003, 0x02);
au0828_write(dev, REG_001, 0x02);
- au0828_write(dev, REG_002, 0x88 | 0x20);
- au0828_write(dev, REG_000, 0x88 | 0x20 | 0x40);
+ au0828_write(dev, REG_002, 0x80 | 0x20 | 0x10);
+ au0828_write(dev, REG_000, 0x80 | 0x40 | 0x20);
+
msleep(250);
break;
case AU0828_BOARD_DVICO_FUSIONHDTV7:
git.openpandora.org / pandora-kernel.git / blobdiff