config VIDEO_VIVI
tristate "Virtual Video Driver"
depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
- depends on (FRAMEBUFFER_CONSOLE || STI_CONSOLE) && FONTS
+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
select FONT_8x16
select VIDEOBUF_VMALLOC
default n
Check out <file:Documentation/video4linux/w9966.txt> for more
information.
-config VIDEO_CPIA
- tristate "CPiA Video For Linux (DEPRECATED)"
- depends on VIDEO_V4L1
- default n
- ---help---
- This driver is DEPRECATED please use the gspca cpia1 module
- instead. Note that you need atleast version 0.6.4 of libv4l for
- the cpia1 gspca module.
-
- This is the video4linux driver for cameras based on Vision's CPiA
- (Colour Processor Interface ASIC), such as the Creative Labs Video
- Blaster Webcam II. If you have one of these cameras, say Y here
- and select parallel port and/or USB lowlevel support below,
- otherwise say N. This will not work with the Creative Webcam III.
-
- Please read <file:Documentation/video4linux/README.cpia> for more
- information.
-
- This driver is also available as a module (cpia).
-
-config VIDEO_CPIA_PP
- tristate "CPiA Parallel Port Lowlevel Support"
- depends on PARPORT_1284 && VIDEO_CPIA && PARPORT
- help
- This is the lowlevel parallel port support for cameras based on
- Vision's CPiA (Colour Processor Interface ASIC), such as the
- Creative Webcam II. If you have the parallel port version of one
- of these cameras, say Y here, otherwise say N. It is also available
- as a module (cpia_pp).
-
-config VIDEO_CPIA_USB
- tristate "CPiA USB Lowlevel Support"
- depends on VIDEO_CPIA && USB
- help
- This is the lowlevel USB support for cameras based on Vision's CPiA
- (Colour Processor Interface ASIC), such as the Creative Webcam II.
- If you have the USB version of one of these cameras, say Y here,
- otherwise say N. This will not work with the Creative Webcam III.
- It is also available as a module (cpia_usb).
-
source "drivers/media/video/cpia2/Kconfig"
-config VIDEO_SAA5246A
- tristate "SAA5246A, SAA5281 Teletext processor"
- depends on I2C && VIDEO_V4L2
- help
- Support for I2C bus based teletext using the SAA5246A or SAA5281
- chip. Useful only if you live in Europe.
-
- To compile this driver as a module, choose M here: the
- module will be called saa5246a.
-
-config VIDEO_SAA5249
- tristate "SAA5249 Teletext processor"
- depends on I2C && VIDEO_V4L2
- help
- Support for I2C bus based teletext using the SAA5249 chip. At the
- moment this is only useful on some European WinTV cards.
-
- To compile this driver as a module, choose M here: the
- module will be called saa5249.
-
config VIDEO_VINO
tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
Say Y here to build in support for the Vino video input system found
on SGI Indy machines.
-config VIDEO_STRADIS
- tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)"
- depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS
- help
- Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
- driver for PCI. There is a product page at
- <http://www.stradis.com/>.
-
source "drivers/media/video/zoran/Kconfig"
config VIDEO_MEYE
CMOS camera controller. This is the controller found on first-
generation OLPC systems.
+config VIDEO_SR030PC30
+ tristate "SR030PC30 VGA camera sensor support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ This driver supports SR030PC30 VGA camera from Siliconfile
+
+config VIDEO_VIA_CAMERA
+ tristate "VIAFB camera controller support"
+ depends on FB_VIA
+ select VIDEOBUF_DMA_SG
+ select VIDEO_OV7670
+ help
+ Driver support for the integrated camera controller in VIA
+ Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems
+ with ov7670 sensors.
+
config SOC_CAMERA
tristate "SoC camera support"
depends on VIDEO_V4L2 && HAS_DMA && I2C
over a bus like PCI or USB. For example some i2c camera connected
directly to the data bus of an SoC.
+config SOC_CAMERA_IMX074
+ tristate "imx074 support"
+ depends on SOC_CAMERA && I2C
+ help
+ This driver supports IMX074 cameras from Sony
+
config SOC_CAMERA_MT9M001
tristate "mt9m001 support"
depends on SOC_CAMERA && I2C
help
This is a generic SoC camera platform driver, useful for testing
+config SOC_CAMERA_OV6650
+ tristate "ov6650 sensor support"
+ depends on SOC_CAMERA && I2C
+ ---help---
+ This is a V4L2 SoC camera driver for the OmniVision OV6650 sensor
+
config SOC_CAMERA_OV772X
tristate "ov772x camera support"
depends on SOC_CAMERA && I2C
---help---
This is a v4l2 driver for the SuperH Mobile CEU Interface
+config VIDEO_OMAP1
+ tristate "OMAP1 Camera Interface driver"
+ depends on VIDEO_DEV && ARCH_OMAP1 && SOC_CAMERA
+ select VIDEOBUF_DMA_CONTIG
+ select VIDEOBUF_DMA_SG
+ ---help---
+ This is a v4l2 driver for the TI OMAP1 camera interface
+
config VIDEO_OMAP2
tristate "OMAP2 Camera Capture Interface driver"
depends on VIDEO_DEV && ARCH_OMAP2
git.openpandora.org / pandora-kernel.git / blobdiff