#include "l64781.h"
#include "tda8083.h"
#include "s5h1420.h"
+#include "lnbp21.h"
static void Set22K (struct budget *budget, int state)
{
* Routines for the Fujitsu Siemens Activy budget card
* 22 kHz tone and DiSEqC are handled by the frontend.
* Voltage must be set here.
+ * GPIO 1: LNBP EN, GPIO 2: LNBP VSEL
*/
static int SetVoltage_Activy (struct budget *budget, fe_sec_voltage_t voltage)
{
switch (voltage) {
case SEC_VOLTAGE_13:
+ saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI);
saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO);
break;
case SEC_VOLTAGE_18:
+ saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI);
saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
break;
+ case SEC_VOLTAGE_OFF:
+ saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO);
+ break;
default:
return -EINVAL;
}
return 0;
}
-static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
-{
- struct budget* budget = (struct budget*) fe->dvb->priv;
- u8 buf;
- struct i2c_msg msg = { .addr = 0x08, .flags = I2C_M_RD, .buf = &buf, .len = sizeof(buf) };
-
- if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-
- switch(voltage) {
- case SEC_VOLTAGE_13:
- buf = (buf & 0xf7) | 0x04;
- break;
-
- case SEC_VOLTAGE_18:
- buf = (buf & 0xf7) | 0x0c;
- break;
-
- case SEC_VOLTAGE_OFF:
- buf = buf & 0xf0;
- break;
- }
-
- msg.flags = 0;
- if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-
- return 0;
-}
-
-static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend* fe, int arg)
-{
- struct budget* budget = (struct budget*) fe->dvb->priv;
- u8 buf;
- struct i2c_msg msg = { .addr = 0x08, .flags = I2C_M_RD, .buf = &buf, .len = sizeof(buf) };
-
- if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-
- if (arg) {
- buf = buf | 0x10;
- } else {
- buf = buf & 0xef;
- }
-
- msg.flags = 0;
- if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-
- return 0;
-}
-
-static int lnbp21_init(struct budget* budget)
-{
- u8 buf = 0x00;
- struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = &buf, .len = sizeof(buf) };
-
- if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1)
- return -EIO;
- return 0;
-}
-
static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
struct budget* budget = (struct budget*) fe->dvb->priv;
.pll_set = alps_bsru6_pll_set,
};
-static u8 alps_bsbe1_inittab[] = {
- 0x01, 0x15,
- 0x02, 0x30,
- 0x03, 0x00,
- 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
- 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
- 0x06, 0x40, /* DAC not used, set to high impendance mode */
- 0x07, 0x00, /* DAC LSB */
- 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
- 0x09, 0x00, /* FIFO */
- 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
- 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
- 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
- 0x10, 0x3f, // AGC2 0x3d
- 0x11, 0x84,
- 0x12, 0xb9,
- 0x15, 0xc9, // lock detector threshold
- 0x16, 0x00,
- 0x17, 0x00,
- 0x18, 0x00,
- 0x19, 0x00,
- 0x1a, 0x00,
- 0x1f, 0x50,
- 0x20, 0x00,
- 0x21, 0x00,
- 0x22, 0x00,
- 0x23, 0x00,
- 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
- 0x29, 0x1e, // 1/2 threshold
- 0x2a, 0x14, // 2/3 threshold
- 0x2b, 0x0f, // 3/4 threshold
- 0x2c, 0x09, // 5/6 threshold
- 0x2d, 0x05, // 7/8 threshold
- 0x2e, 0x01,
- 0x31, 0x1f, // test all FECs
- 0x32, 0x19, // viterbi and synchro search
- 0x33, 0xfc, // rs control
- 0x34, 0x93, // error control
- 0x0f, 0x92, // 0x80 = inverse AGC
- 0xff, 0xff
-};
-
-static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params)
-{
- int ret;
- u8 data[4];
- u32 div;
- struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
-
- if ((params->frequency < 950000) || (params->frequency > 2150000))
- return -EINVAL;
-
- div = (params->frequency + (125 - 1)) / 125; // round correctly
- data[0] = (div >> 8) & 0x7f;
- data[1] = div & 0xff;
- data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
- data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4;
-
- ret = i2c_transfer(i2c, &msg, 1);
- return (ret != 1) ? -EIO : 0;
-}
-
-static struct stv0299_config alps_bsbe1_config = {
- .demod_address = 0x68,
- .inittab = alps_bsbe1_inittab,
- .mclk = 88000000UL,
- .invert = 1,
- .skip_reinit = 0,
- .min_delay_ms = 100,
- .set_symbol_rate = alps_bsru6_set_symbol_rate,
- .pll_set = alps_bsbe1_pll_set,
-};
-
static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
struct budget* budget = (struct budget*) fe->dvb->priv;
static void frontend_init(struct budget *budget)
{
switch(budget->dev->pci->subsystem_device) {
- case 0x1017:
- // try the ALPS BSBE1 now
- budget->dvb_frontend = stv0299_attach(&alps_bsbe1_config, &budget->i2c_adap);
- if (budget->dvb_frontend) {
- budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage;
- budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
- if (lnbp21_init(budget)) {
- printk("%s: No LNBP21 found!\n", __FUNCTION__);
- goto error_out;
- }
- }
-
- break;
case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659))
case 0x1013:
// try the ALPS BSRV2 first of all
budget->dvb_frontend = stv0299_attach(&alps_bsru6_config, &budget->i2c_adap);
if (budget->dvb_frontend) {
budget->dvb_frontend->ops->set_voltage = siemens_budget_set_voltage;
- break;
+ budget->dvb_frontend->ops->dishnetwork_send_legacy_command = NULL;
}
break;
budget->dvb_frontend = tda8083_attach(&grundig_29504_451_config, &budget->i2c_adap);
if (budget->dvb_frontend) {
budget->dvb_frontend->ops->set_voltage = siemens_budget_set_voltage;
- break;
+ budget->dvb_frontend->ops->dishnetwork_send_legacy_command = NULL;
}
break;
case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260))
budget->dvb_frontend = s5h1420_attach(&s5h1420_config, &budget->i2c_adap);
if (budget->dvb_frontend) {
- budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage;
- budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
- if (lnbp21_init(budget)) {
+ if (lnbp21_init(budget->dvb_frontend, &budget->i2c_adap, 0, 0)) {
printk("%s: No LNBP21 found!\n", __FUNCTION__);
goto error_out;
}
static struct saa7146_extension budget_extension;
-MAKE_BUDGET_INFO(ttbs2, "TT-Budget/WinTV-NOVA-S PCI (rev AL/alps bsbe1 lnbp21 frontend)", BUDGET_TT);
MAKE_BUDGET_INFO(ttbs, "TT-Budget/WinTV-NOVA-S PCI", BUDGET_TT);
MAKE_BUDGET_INFO(ttbc, "TT-Budget/WinTV-NOVA-C PCI", BUDGET_TT);
MAKE_BUDGET_INFO(ttbt, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT);
MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004),
MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005),
MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
- MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017),
MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1016),
MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60),
MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61),
git.openpandora.org / pandora-kernel.git / blobdiff