udelay(1);
result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0);
- if ((result == -ETIMEDOUT) || ((result == 0xff) && ((address & 3) < 2))) {
+ if (result == -ETIMEDOUT) {
ciintf_slot_shutdown(ca, slot);
printk(KERN_INFO "budget-av: cam ejected 3\n");
return -ETIMEDOUT;
.mclk = 88000000UL,
.invert = 0,
.skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_1,
+ .lock_output = STV0299_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
.mclk = 88000000UL,
.invert = 0,
.skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_0,
+ .lock_output = STV0299_LOCKOUTPUT_0,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
.mclk = 88000000UL,
.invert = 1,
.skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_1,
+ .lock_output = STV0299_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
.invert = 0,
};
+static struct tda10023_config philips_cu1216_tda10023_config = {
+ .demod_address = 0x0c,
+ .invert = 1,
+};
+
static int philips_tu1216_tuner_init(struct dvb_frontend *fe)
{
struct budget *budget = (struct budget *) fe->dvb->priv;
.mclk = 88000000UL,
.invert = 0,
.skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_1,
+ .lock_output = STV0299_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = philips_sd1878_ci_set_symbol_rate,
switch (saa->pci->subsystem_device) {
case SUBID_DVBS_KNC1:
+ /*
+ * maybe that setting is needed for other dvb-s cards as well,
+ * but so far it has been only confirmed for this type
+ */
+ budget_av->reinitialise_demod = 1;
+ /* fall through */
case SUBID_DVBS_KNC1_PLUS:
case SUBID_DVBS_EASYWATCH_1:
if (saa->pci->subsystem_vendor == 0x1894) {
case SUBID_DVBC_KNC1_PLUS_MK3:
budget_av->reinitialise_demod = 1;
budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
- fe = dvb_attach(tda10023_attach, &philips_cu1216_config,
- &budget_av->budget.i2c_adap,
- read_pwm(budget_av));
+ fe = dvb_attach(tda10023_attach,
+ &philips_cu1216_tda10023_config,
+ &budget_av->budget.i2c_adap,
+ read_pwm(budget_av));
if (fe) {
fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
}