/*
* mxl5007t.c - driver for the MaxLinear MxL5007T silicon tuner
*
- * Copyright (C) 2008 Michael Krufky <mkrufky@linuxtv.org>
+ * Copyright (C) 2008, 2009 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#define MHz 1000000
enum mxl5007t_mode {
- MxL_MODE_OTA_DVBT_ATSC = 0,
- MxL_MODE_OTA_NTSC_PAL_GH = 1,
- MxL_MODE_OTA_PAL_IB = 2,
- MxL_MODE_OTA_PAL_D_SECAM_KL = 3,
- MxL_MODE_OTA_ISDBT = 4,
- MxL_MODE_CABLE_DIGITAL = 0x10,
- MxL_MODE_CABLE_NTSC_PAL_GH = 0x11,
- MxL_MODE_CABLE_PAL_IB = 0x12,
- MxL_MODE_CABLE_PAL_D_SECAM_KL = 0x13,
- MxL_MODE_CABLE_SCTE40 = 0x14,
+ MxL_MODE_ISDBT = 0,
+ MxL_MODE_DVBT = 1,
+ MxL_MODE_ATSC = 2,
+ MxL_MODE_CABLE = 0x10,
};
enum mxl5007t_chip_version {
MxL_UNKNOWN_ID = 0x00,
MxL_5007_V1_F1 = 0x11,
MxL_5007_V1_F2 = 0x12,
+ MxL_5007_V4 = 0x14,
MxL_5007_V2_100_F1 = 0x21,
MxL_5007_V2_100_F2 = 0x22,
MxL_5007_V2_200_F1 = 0x23,
/* ------------------------------------------------------------------------- */
static struct reg_pair_t init_tab[] = {
- { 0x0b, 0x44 }, /* XTAL */
- { 0x0c, 0x60 }, /* IF */
- { 0x10, 0x00 }, /* MISC */
- { 0x12, 0xca }, /* IDAC */
- { 0x16, 0x90 }, /* MODE */
- { 0x32, 0x38 }, /* MODE Analog/Digital */
- { 0xd8, 0x18 }, /* CLK_OUT_ENABLE */
- { 0x2c, 0x34 }, /* OVERRIDE */
- { 0x4d, 0x40 }, /* OVERRIDE */
- { 0x7f, 0x02 }, /* OVERRIDE */
- { 0x9a, 0x52 }, /* OVERRIDE */
- { 0x48, 0x5a }, /* OVERRIDE */
- { 0x76, 0x1a }, /* OVERRIDE */
- { 0x6a, 0x48 }, /* OVERRIDE */
- { 0x64, 0x28 }, /* OVERRIDE */
- { 0x66, 0xe6 }, /* OVERRIDE */
- { 0x35, 0x0e }, /* OVERRIDE */
- { 0x7e, 0x01 }, /* OVERRIDE */
- { 0x83, 0x00 }, /* OVERRIDE */
- { 0x04, 0x0b }, /* OVERRIDE */
- { 0x05, 0x01 }, /* TOP_MASTER_ENABLE */
+ { 0x02, 0x06 },
+ { 0x03, 0x48 },
+ { 0x05, 0x04 },
+ { 0x06, 0x10 },
+ { 0x2e, 0x15 }, /* OVERRIDE */
+ { 0x30, 0x10 }, /* OVERRIDE */
+ { 0x45, 0x58 }, /* OVERRIDE */
+ { 0x48, 0x19 }, /* OVERRIDE */
+ { 0x52, 0x03 }, /* OVERRIDE */
+ { 0x53, 0x44 }, /* OVERRIDE */
+ { 0x6a, 0x4b }, /* OVERRIDE */
+ { 0x76, 0x00 }, /* OVERRIDE */
+ { 0x78, 0x18 }, /* OVERRIDE */
+ { 0x7a, 0x17 }, /* OVERRIDE */
+ { 0x85, 0x06 }, /* OVERRIDE */
+ { 0x01, 0x01 }, /* TOP_MASTER_ENABLE */
{ 0, 0 }
};
static struct reg_pair_t init_tab_cable[] = {
- { 0x0b, 0x44 }, /* XTAL */
- { 0x0c, 0x60 }, /* IF */
- { 0x10, 0x00 }, /* MISC */
- { 0x12, 0xca }, /* IDAC */
- { 0x16, 0x90 }, /* MODE */
- { 0x32, 0x38 }, /* MODE A/D */
- { 0x71, 0x3f }, /* TOP1 */
- { 0x72, 0x3f }, /* TOP2 */
- { 0x74, 0x3f }, /* TOP3 */
- { 0xd8, 0x18 }, /* CLK_OUT_ENABLE */
- { 0x2c, 0x34 }, /* OVERRIDE */
- { 0x4d, 0x40 }, /* OVERRIDE */
- { 0x7f, 0x02 }, /* OVERRIDE */
- { 0x9a, 0x52 }, /* OVERRIDE */
- { 0x48, 0x5a }, /* OVERRIDE */
- { 0x76, 0x1a }, /* OVERRIDE */
- { 0x6a, 0x48 }, /* OVERRIDE */
- { 0x64, 0x28 }, /* OVERRIDE */
- { 0x66, 0xe6 }, /* OVERRIDE */
- { 0x35, 0x0e }, /* OVERRIDE */
- { 0x7e, 0x01 }, /* OVERRIDE */
- { 0x04, 0x0b }, /* OVERRIDE */
- { 0x68, 0xb4 }, /* OVERRIDE */
- { 0x36, 0x00 }, /* OVERRIDE */
- { 0x05, 0x01 }, /* TOP_MASTER_ENABLE */
+ { 0x02, 0x06 },
+ { 0x03, 0x48 },
+ { 0x05, 0x04 },
+ { 0x06, 0x10 },
+ { 0x09, 0x3f },
+ { 0x0a, 0x3f },
+ { 0x0b, 0x3f },
+ { 0x2e, 0x15 }, /* OVERRIDE */
+ { 0x30, 0x10 }, /* OVERRIDE */
+ { 0x45, 0x58 }, /* OVERRIDE */
+ { 0x48, 0x19 }, /* OVERRIDE */
+ { 0x52, 0x03 }, /* OVERRIDE */
+ { 0x53, 0x44 }, /* OVERRIDE */
+ { 0x6a, 0x4b }, /* OVERRIDE */
+ { 0x76, 0x00 }, /* OVERRIDE */
+ { 0x78, 0x18 }, /* OVERRIDE */
+ { 0x7a, 0x17 }, /* OVERRIDE */
+ { 0x85, 0x06 }, /* OVERRIDE */
+ { 0x01, 0x01 }, /* TOP_MASTER_ENABLE */
{ 0, 0 }
};
/* ------------------------------------------------------------------------- */
static struct reg_pair_t reg_pair_rftune[] = {
- { 0x11, 0x00 }, /* abort tune */
- { 0x13, 0x15 },
- { 0x14, 0x40 },
- { 0x15, 0x0e },
- { 0x11, 0x02 }, /* start tune */
+ { 0x0f, 0x00 }, /* abort tune */
+ { 0x0c, 0x15 },
+ { 0x0d, 0x40 },
+ { 0x0e, 0x0e },
+ { 0x1f, 0x87 }, /* OVERRIDE */
+ { 0x20, 0x1f }, /* OVERRIDE */
+ { 0x21, 0x87 }, /* OVERRIDE */
+ { 0x22, 0x1f }, /* OVERRIDE */
+ { 0x80, 0x01 }, /* freq dependent */
+ { 0x0f, 0x01 }, /* start tune */
{ 0, 0 }
};
s32 if_diff_out_level)
{
switch (mode) {
- case MxL_MODE_OTA_DVBT_ATSC:
- set_reg_bits(state->tab_init, 0x32, 0x0f, 0x06);
- set_reg_bits(state->tab_init, 0x35, 0xff, 0x0e);
+ case MxL_MODE_ATSC:
+ set_reg_bits(state->tab_init, 0x06, 0x1f, 0x12);
break;
- case MxL_MODE_OTA_ISDBT:
- set_reg_bits(state->tab_init, 0x32, 0x0f, 0x06);
- set_reg_bits(state->tab_init, 0x35, 0xff, 0x12);
+ case MxL_MODE_DVBT:
+ set_reg_bits(state->tab_init, 0x06, 0x1f, 0x11);
break;
- case MxL_MODE_OTA_NTSC_PAL_GH:
- set_reg_bits(state->tab_init, 0x16, 0x70, 0x00);
- set_reg_bits(state->tab_init, 0x32, 0xff, 0x85);
+ case MxL_MODE_ISDBT:
+ set_reg_bits(state->tab_init, 0x06, 0x1f, 0x10);
break;
- case MxL_MODE_OTA_PAL_IB:
- set_reg_bits(state->tab_init, 0x16, 0x70, 0x10);
- set_reg_bits(state->tab_init, 0x32, 0xff, 0x85);
- break;
- case MxL_MODE_OTA_PAL_D_SECAM_KL:
- set_reg_bits(state->tab_init, 0x16, 0x70, 0x20);
- set_reg_bits(state->tab_init, 0x32, 0xff, 0x85);
- break;
- case MxL_MODE_CABLE_DIGITAL:
- set_reg_bits(state->tab_init_cable, 0x71, 0xff, 0x01);
- set_reg_bits(state->tab_init_cable, 0x72, 0xff,
- 8 - if_diff_out_level);
- set_reg_bits(state->tab_init_cable, 0x74, 0xff, 0x17);
- break;
- case MxL_MODE_CABLE_NTSC_PAL_GH:
- set_reg_bits(state->tab_init, 0x16, 0x70, 0x00);
- set_reg_bits(state->tab_init, 0x32, 0xff, 0x85);
- set_reg_bits(state->tab_init_cable, 0x71, 0xff, 0x01);
- set_reg_bits(state->tab_init_cable, 0x72, 0xff,
- 8 - if_diff_out_level);
- set_reg_bits(state->tab_init_cable, 0x74, 0xff, 0x17);
- break;
- case MxL_MODE_CABLE_PAL_IB:
- set_reg_bits(state->tab_init, 0x16, 0x70, 0x10);
- set_reg_bits(state->tab_init, 0x32, 0xff, 0x85);
- set_reg_bits(state->tab_init_cable, 0x71, 0xff, 0x01);
- set_reg_bits(state->tab_init_cable, 0x72, 0xff,
+ case MxL_MODE_CABLE:
+ set_reg_bits(state->tab_init_cable, 0x09, 0xff, 0xc1);
+ set_reg_bits(state->tab_init_cable, 0x0a, 0xff,
8 - if_diff_out_level);
- set_reg_bits(state->tab_init_cable, 0x74, 0xff, 0x17);
- break;
- case MxL_MODE_CABLE_PAL_D_SECAM_KL:
- set_reg_bits(state->tab_init, 0x16, 0x70, 0x20);
- set_reg_bits(state->tab_init, 0x32, 0xff, 0x85);
- set_reg_bits(state->tab_init_cable, 0x71, 0xff, 0x01);
- set_reg_bits(state->tab_init_cable, 0x72, 0xff,
- 8 - if_diff_out_level);
- set_reg_bits(state->tab_init_cable, 0x74, 0xff, 0x17);
- break;
- case MxL_MODE_CABLE_SCTE40:
- set_reg_bits(state->tab_init_cable, 0x36, 0xff, 0x08);
- set_reg_bits(state->tab_init_cable, 0x68, 0xff, 0xbc);
- set_reg_bits(state->tab_init_cable, 0x71, 0xff, 0x01);
- set_reg_bits(state->tab_init_cable, 0x72, 0xff,
- 8 - if_diff_out_level);
- set_reg_bits(state->tab_init_cable, 0x74, 0xff, 0x17);
+ set_reg_bits(state->tab_init_cable, 0x0b, 0xff, 0x17);
break;
default:
mxl_fail(-EINVAL);
val = 0x00;
break;
case MxL_IF_4_5_MHZ:
- val = 0x20;
+ val = 0x02;
break;
case MxL_IF_4_57_MHZ:
- val = 0x30;
+ val = 0x03;
break;
case MxL_IF_5_MHZ:
- val = 0x40;
+ val = 0x04;
break;
case MxL_IF_5_38_MHZ:
- val = 0x50;
+ val = 0x05;
break;
case MxL_IF_6_MHZ:
- val = 0x60;
+ val = 0x06;
break;
case MxL_IF_6_28_MHZ:
- val = 0x70;
+ val = 0x07;
break;
case MxL_IF_9_1915_MHZ:
- val = 0x80;
+ val = 0x08;
break;
case MxL_IF_35_25_MHZ:
- val = 0x90;
+ val = 0x09;
break;
case MxL_IF_36_15_MHZ:
- val = 0xa0;
+ val = 0x0a;
break;
case MxL_IF_44_MHZ:
- val = 0xb0;
+ val = 0x0b;
break;
default:
mxl_fail(-EINVAL);
return;
}
- set_reg_bits(state->tab_init, 0x0c, 0xf0, val);
+ set_reg_bits(state->tab_init, 0x02, 0x0f, val);
/* set inverted IF or normal IF */
- set_reg_bits(state->tab_init, 0x0c, 0x08, invert_if ? 0x08 : 0x00);
+ set_reg_bits(state->tab_init, 0x02, 0x10, invert_if ? 0x10 : 0x00);
return;
}
static void mxl5007t_set_xtal_freq_bits(struct mxl5007t_state *state,
enum mxl5007t_xtal_freq xtal_freq)
{
- u8 val;
-
switch (xtal_freq) {
case MxL_XTAL_16_MHZ:
- val = 0x00; /* select xtal freq & Ref Freq */
+ /* select xtal freq & ref freq */
+ set_reg_bits(state->tab_init, 0x03, 0xf0, 0x00);
+ set_reg_bits(state->tab_init, 0x05, 0x0f, 0x00);
break;
case MxL_XTAL_20_MHZ:
- val = 0x11;
+ set_reg_bits(state->tab_init, 0x03, 0xf0, 0x10);
+ set_reg_bits(state->tab_init, 0x05, 0x0f, 0x01);
break;
case MxL_XTAL_20_25_MHZ:
- val = 0x22;
+ set_reg_bits(state->tab_init, 0x03, 0xf0, 0x20);
+ set_reg_bits(state->tab_init, 0x05, 0x0f, 0x02);
break;
case MxL_XTAL_20_48_MHZ:
- val = 0x33;
+ set_reg_bits(state->tab_init, 0x03, 0xf0, 0x30);
+ set_reg_bits(state->tab_init, 0x05, 0x0f, 0x03);
break;
case MxL_XTAL_24_MHZ:
- val = 0x44;
+ set_reg_bits(state->tab_init, 0x03, 0xf0, 0x40);
+ set_reg_bits(state->tab_init, 0x05, 0x0f, 0x04);
break;
case MxL_XTAL_25_MHZ:
- val = 0x55;
+ set_reg_bits(state->tab_init, 0x03, 0xf0, 0x50);
+ set_reg_bits(state->tab_init, 0x05, 0x0f, 0x05);
break;
case MxL_XTAL_25_14_MHZ:
- val = 0x66;
+ set_reg_bits(state->tab_init, 0x03, 0xf0, 0x60);
+ set_reg_bits(state->tab_init, 0x05, 0x0f, 0x06);
break;
case MxL_XTAL_27_MHZ:
- val = 0x77;
+ set_reg_bits(state->tab_init, 0x03, 0xf0, 0x70);
+ set_reg_bits(state->tab_init, 0x05, 0x0f, 0x07);
break;
case MxL_XTAL_28_8_MHZ:
- val = 0x88;
+ set_reg_bits(state->tab_init, 0x03, 0xf0, 0x80);
+ set_reg_bits(state->tab_init, 0x05, 0x0f, 0x08);
break;
case MxL_XTAL_32_MHZ:
- val = 0x99;
+ set_reg_bits(state->tab_init, 0x03, 0xf0, 0x90);
+ set_reg_bits(state->tab_init, 0x05, 0x0f, 0x09);
break;
case MxL_XTAL_40_MHZ:
- val = 0xaa;
+ set_reg_bits(state->tab_init, 0x03, 0xf0, 0xa0);
+ set_reg_bits(state->tab_init, 0x05, 0x0f, 0x0a);
break;
case MxL_XTAL_44_MHZ:
- val = 0xbb;
+ set_reg_bits(state->tab_init, 0x03, 0xf0, 0xb0);
+ set_reg_bits(state->tab_init, 0x05, 0x0f, 0x0b);
break;
case MxL_XTAL_48_MHZ:
- val = 0xcc;
+ set_reg_bits(state->tab_init, 0x03, 0xf0, 0xc0);
+ set_reg_bits(state->tab_init, 0x05, 0x0f, 0x0c);
break;
case MxL_XTAL_49_3811_MHZ:
- val = 0xdd;
+ set_reg_bits(state->tab_init, 0x03, 0xf0, 0xd0);
+ set_reg_bits(state->tab_init, 0x05, 0x0f, 0x0d);
break;
default:
mxl_fail(-EINVAL);
return;
}
- set_reg_bits(state->tab_init, 0x0b, 0xff, val);
return;
}
mxl5007t_set_if_freq_bits(state, cfg->if_freq_hz, cfg->invert_if);
mxl5007t_set_xtal_freq_bits(state, cfg->xtal_freq_hz);
- set_reg_bits(state->tab_init, 0x10, 0x40, cfg->loop_thru_enable << 6);
-
- set_reg_bits(state->tab_init, 0xd8, 0x08, cfg->clk_out_enable << 3);
-
- set_reg_bits(state->tab_init, 0x10, 0x07, cfg->clk_out_amp);
+ set_reg_bits(state->tab_init, 0x04, 0x01, cfg->loop_thru_enable);
+ set_reg_bits(state->tab_init, 0x03, 0x08, cfg->clk_out_enable << 3);
+ set_reg_bits(state->tab_init, 0x03, 0x07, cfg->clk_out_amp);
- /* set IDAC to automatic mode control by AGC */
- set_reg_bits(state->tab_init, 0x12, 0x80, 0x00);
-
- if (mode >= MxL_MODE_CABLE_DIGITAL) {
+ if (mode >= MxL_MODE_CABLE) {
copy_reg_bits(state->tab_init, state->tab_init_cable);
return state->tab_init_cable;
} else
* and DIG_MODEINDEX_CSF */
break;
case MxL_BW_7MHz:
- val = 0x21;
+ val = 0x2a;
break;
case MxL_BW_8MHz:
val = 0x3f;
mxl_fail(-EINVAL);
return;
}
- set_reg_bits(state->tab_rftune, 0x13, 0x3f, val);
+ set_reg_bits(state->tab_rftune, 0x0c, 0x3f, val);
return;
}
if (temp > 7812)
dig_rf_freq++;
- set_reg_bits(state->tab_rftune, 0x14, 0xff, (u8)dig_rf_freq);
- set_reg_bits(state->tab_rftune, 0x15, 0xff, (u8)(dig_rf_freq >> 8));
+ set_reg_bits(state->tab_rftune, 0x0d, 0xff, (u8) dig_rf_freq);
+ set_reg_bits(state->tab_rftune, 0x0e, 0xff, (u8) (dig_rf_freq >> 8));
+
+ if (rf_freq >= 333000000)
+ set_reg_bits(state->tab_rftune, 0x80, 0x40, 0x40);
return state->tab_rftune;
}
static int mxl5007t_soft_reset(struct mxl5007t_state *state)
{
u8 d = 0xff;
- struct i2c_msg msg = { .addr = state->i2c_props.addr, .flags = 0,
- .buf = &d, .len = 1 };
-
+ struct i2c_msg msg = {
+ .addr = state->i2c_props.addr, .flags = 0,
+ .buf = &d, .len = 1
+ };
int ret = i2c_transfer(state->i2c_props.adap, &msg, 1);
if (ret != 1) {
if (mxl_fail(ret))
goto fail;
mdelay(1);
-
- ret = mxl5007t_write_reg(state, 0x2c, 0x35);
- mxl_fail(ret);
fail:
return ret;
}
*rf_locked = 0;
*ref_locked = 0;
- ret = mxl5007t_read_reg(state, 0xcf, &d);
+ ret = mxl5007t_read_reg(state, 0xd8, &d);
if (mxl_fail(ret))
goto fail;
return ret;
}
-static int mxl5007t_check_rf_input_power(struct mxl5007t_state *state,
- s32 *rf_input_level)
-{
- u8 d1, d2;
- int ret;
-
- ret = mxl5007t_read_reg(state, 0xb7, &d1);
- if (mxl_fail(ret))
- goto fail;
-
- ret = mxl5007t_read_reg(state, 0xbf, &d2);
- if (mxl_fail(ret))
- goto fail;
-
- d2 = d2 >> 4;
- if (d2 > 7)
- d2 += 0xf0;
-
- *rf_input_level = (s32)(d1 + d2 - 113);
-fail:
- return ret;
-}
-
/* ------------------------------------------------------------------------- */
static int mxl5007t_get_status(struct dvb_frontend *fe, u32 *status)
{
struct mxl5007t_state *state = fe->tuner_priv;
- int rf_locked, ref_locked;
- s32 rf_input_level = 0;
- int ret;
+ int rf_locked, ref_locked, ret;
+
+ *status = 0;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
mxl_debug("%s%s", rf_locked ? "rf locked " : "",
ref_locked ? "ref locked" : "");
- ret = mxl5007t_check_rf_input_power(state, &rf_input_level);
- if (mxl_fail(ret))
- goto fail;
- mxl_debug("rf input power: %d", rf_input_level);
+ if ((rf_locked) || (ref_locked))
+ *status |= TUNER_STATUS_LOCKED;
fail:
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
switch (params->u.vsb.modulation) {
case VSB_8:
case VSB_16:
- mode = MxL_MODE_OTA_DVBT_ATSC;
+ mode = MxL_MODE_ATSC;
break;
case QAM_64:
case QAM_256:
- mode = MxL_MODE_CABLE_DIGITAL;
+ mode = MxL_MODE_CABLE;
break;
default:
mxl_err("modulation not set!");
mxl_err("bandwidth not set!");
return -EINVAL;
}
- mode = MxL_MODE_OTA_DVBT_ATSC;
+ mode = MxL_MODE_DVBT;
} else {
mxl_err("modulation type not supported!");
return -EINVAL;
return ret;
}
-static int mxl5007t_set_analog_params(struct dvb_frontend *fe,
- struct analog_parameters *params)
-{
- struct mxl5007t_state *state = fe->tuner_priv;
- enum mxl5007t_bw_mhz bw = 0; /* FIXME */
- enum mxl5007t_mode cbl_mode;
- enum mxl5007t_mode ota_mode;
- char *mode_name;
- int ret;
- u32 freq = params->frequency * 62500;
-
-#define cable 1
- if (params->std & V4L2_STD_MN) {
- cbl_mode = MxL_MODE_CABLE_NTSC_PAL_GH;
- ota_mode = MxL_MODE_OTA_NTSC_PAL_GH;
- mode_name = "MN";
- } else if (params->std & V4L2_STD_B) {
- cbl_mode = MxL_MODE_CABLE_PAL_IB;
- ota_mode = MxL_MODE_OTA_PAL_IB;
- mode_name = "B";
- } else if (params->std & V4L2_STD_GH) {
- cbl_mode = MxL_MODE_CABLE_NTSC_PAL_GH;
- ota_mode = MxL_MODE_OTA_NTSC_PAL_GH;
- mode_name = "GH";
- } else if (params->std & V4L2_STD_PAL_I) {
- cbl_mode = MxL_MODE_CABLE_PAL_IB;
- ota_mode = MxL_MODE_OTA_PAL_IB;
- mode_name = "I";
- } else if (params->std & V4L2_STD_DK) {
- cbl_mode = MxL_MODE_CABLE_PAL_D_SECAM_KL;
- ota_mode = MxL_MODE_OTA_PAL_D_SECAM_KL;
- mode_name = "DK";
- } else if (params->std & V4L2_STD_SECAM_L) {
- cbl_mode = MxL_MODE_CABLE_PAL_D_SECAM_KL;
- ota_mode = MxL_MODE_OTA_PAL_D_SECAM_KL;
- mode_name = "L";
- } else if (params->std & V4L2_STD_SECAM_LC) {
- cbl_mode = MxL_MODE_CABLE_PAL_D_SECAM_KL;
- ota_mode = MxL_MODE_OTA_PAL_D_SECAM_KL;
- mode_name = "L'";
- } else {
- mode_name = "xx";
- /* FIXME */
- cbl_mode = MxL_MODE_CABLE_NTSC_PAL_GH;
- ota_mode = MxL_MODE_OTA_NTSC_PAL_GH;
- }
- mxl_debug("setting mxl5007 to system %s", mode_name);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
-
- mutex_lock(&state->lock);
-
- ret = mxl5007t_tuner_init(state, cable ? cbl_mode : ota_mode);
- if (mxl_fail(ret))
- goto fail;
-
- ret = mxl5007t_tuner_rf_tune(state, freq, bw);
- if (mxl_fail(ret))
- goto fail;
-
- state->frequency = freq;
- state->bandwidth = 0;
-fail:
- mutex_unlock(&state->lock);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
-
- return ret;
-}
-
/* ------------------------------------------------------------------------- */
static int mxl5007t_init(struct dvb_frontend *fe)
{
struct mxl5007t_state *state = fe->tuner_priv;
int ret;
- u8 d;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
- ret = mxl5007t_read_reg(state, 0x05, &d);
- if (mxl_fail(ret))
- goto fail;
-
- ret = mxl5007t_write_reg(state, 0x05, d | 0x01);
+ /* wake from standby */
+ ret = mxl5007t_write_reg(state, 0x01, 0x01);
mxl_fail(ret);
-fail:
+
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
{
struct mxl5007t_state *state = fe->tuner_priv;
int ret;
- u8 d;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
- ret = mxl5007t_read_reg(state, 0x05, &d);
- if (mxl_fail(ret))
- goto fail;
-
- ret = mxl5007t_write_reg(state, 0x05, d & ~0x01);
+ /* enter standby mode */
+ ret = mxl5007t_write_reg(state, 0x01, 0x00);
mxl_fail(ret);
-fail:
+ ret = mxl5007t_write_reg(state, 0x0f, 0x00);
+ mxl_fail(ret);
+
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
.init = mxl5007t_init,
.sleep = mxl5007t_sleep,
.set_params = mxl5007t_set_params,
- .set_analog_params = mxl5007t_set_analog_params,
.get_status = mxl5007t_get_status,
.get_frequency = mxl5007t_get_frequency,
.get_bandwidth = mxl5007t_get_bandwidth,
int ret;
u8 id;
- ret = mxl5007t_read_reg(state, 0xd3, &id);
+ ret = mxl5007t_read_reg(state, 0xd9, &id);
if (mxl_fail(ret))
goto fail;
case MxL_5007_V2_200_F2:
name = "MxL5007.v2.200.f2";
break;
+ case MxL_5007_V4:
+ name = "MxL5007T.v4";
+ break;
default:
name = "MxL5007T";
+ printk(KERN_WARNING "%s: unknown rev (%02x)\n", __func__, id);
id = MxL_UNKNOWN_ID;
}
state->chip_id = id;
mutex_lock(&mxl5007t_list_mutex);
instance = hybrid_tuner_request_state(struct mxl5007t_state, state,
hybrid_tuner_instance_list,
- i2c, addr, "mxl5007");
+ i2c, addr, "mxl5007t");
switch (instance) {
case 0:
goto fail;
MODULE_DESCRIPTION("MaxLinear MxL5007T Silicon IC tuner driver");
MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
MODULE_LICENSE("GPL");
-MODULE_VERSION("0.1");
+MODULE_VERSION("0.2");
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
git.openpandora.org / pandora-kernel.git / blobdiff