*
* We group bitmap updates into batches. Each batch has a number.
* We may write out several batches at once, but that isn't very important.
- * conf->bm_write is the number of the last batch successfully written.
- * conf->bm_flush is the number of the last batch that was closed to
+ * conf->seq_write is the number of the last batch successfully written.
+ * conf->seq_flush is the number of the last batch that was closed to
* new additions.
* When we discover that we will need to write to any block in a stripe
* (in add_stripe_bio) we update the in-memory bitmap and record in sh->bm_seq
- * the number of the batch it will be in. This is bm_flush+1.
+ * the number of the batch it will be in. This is seq_flush+1.
* When we are ready to do a write, if that batch hasn't been written yet,
* we plug the array and queue the stripe for later.
* When an unplug happens, we increment bm_flush, thus closing the current
BUG_ON(!list_empty(&sh->lru));
BUG_ON(atomic_read(&conf->active_stripes)==0);
if (test_bit(STRIPE_HANDLE, &sh->state)) {
- if (test_bit(STRIPE_DELAYED, &sh->state)) {
+ if (test_bit(STRIPE_DELAYED, &sh->state))
list_add_tail(&sh->lru, &conf->delayed_list);
- plugger_set_plug(&conf->plug);
- } else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
- sh->bm_seq - conf->seq_write > 0) {
+ else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
+ sh->bm_seq - conf->seq_write > 0)
list_add_tail(&sh->lru, &conf->bitmap_list);
- plugger_set_plug(&conf->plug);
- } else {
+ else {
clear_bit(STRIPE_BIT_DELAY, &sh->state);
list_add_tail(&sh->lru, &conf->handle_list);
}
< (conf->max_nr_stripes *3/4)
|| !conf->inactive_blocked),
conf->device_lock,
- md_raid5_kick_device(conf));
+ );
conf->inactive_blocked = 0;
} else
init_stripe(sh, sector, previous);
wait_event_lock_irq(conf->wait_for_stripe,
!list_empty(&conf->inactive_list),
conf->device_lock,
- blk_flush_plug(current));
+ );
osh = get_free_stripe(conf);
spin_unlock_irq(&conf->device_lock);
atomic_set(&nsh->count, 1);
atomic_inc(&conf->preread_active_stripes);
list_add_tail(&sh->lru, &conf->hold_list);
}
- } else
- plugger_set_plug(&conf->plug);
+ }
}
static void activate_bit_delay(raid5_conf_t *conf)
}
}
-void md_raid5_kick_device(raid5_conf_t *conf)
-{
- blk_flush_plug(current);
- raid5_activate_delayed(conf);
- md_wakeup_thread(conf->mddev->thread);
-}
-EXPORT_SYMBOL_GPL(md_raid5_kick_device);
-
-static void raid5_unplug(struct plug_handle *plug)
-{
- raid5_conf_t *conf = container_of(plug, raid5_conf_t, plug);
-
- md_raid5_kick_device(conf);
-}
-
int md_raid5_congested(mddev_t *mddev, int bits)
{
raid5_conf_t *conf = mddev->private;
struct stripe_head *sh;
const int rw = bio_data_dir(bi);
int remaining;
+ int plugged;
if (unlikely(bi->bi_rw & REQ_FLUSH)) {
md_flush_request(mddev, bi);
bi->bi_next = NULL;
bi->bi_phys_segments = 1; /* over-loaded to count active stripes */
+ plugged = mddev_check_plugged(mddev);
for (;logical_sector < last_sector; logical_sector += STRIPE_SECTORS) {
DEFINE_WAIT(w);
int disks, data_disks;
* add failed due to overlap. Flush everything
* and wait a while
*/
- md_raid5_kick_device(conf);
+ md_wakeup_thread(mddev->thread);
release_stripe(sh);
schedule();
goto retry;
}
}
+ if (!plugged)
+ md_wakeup_thread(mddev->thread);
+
spin_lock_irq(&conf->device_lock);
remaining = raid5_dec_bi_phys_segments(bi);
spin_unlock_irq(&conf->device_lock);
struct stripe_head *sh;
raid5_conf_t *conf = mddev->private;
int handled;
+ struct blk_plug plug;
pr_debug("+++ raid5d active\n");
md_check_recovery(mddev);
+ blk_start_plug(&plug);
handled = 0;
spin_lock_irq(&conf->device_lock);
while (1) {
struct bio *bio;
- if (conf->seq_flush != conf->seq_write) {
- int seq = conf->seq_flush;
+ if (atomic_read(&mddev->plug_cnt) == 0 &&
+ !list_empty(&conf->bitmap_list)) {
+ /* Now is a good time to flush some bitmap updates */
+ conf->seq_flush++;
spin_unlock_irq(&conf->device_lock);
bitmap_unplug(mddev->bitmap);
spin_lock_irq(&conf->device_lock);
- conf->seq_write = seq;
+ conf->seq_write = conf->seq_flush;
activate_bit_delay(conf);
}
+ if (atomic_read(&mddev->plug_cnt) == 0)
+ raid5_activate_delayed(conf);
while ((bio = remove_bio_from_retry(conf))) {
int ok;
spin_unlock_irq(&conf->device_lock);
async_tx_issue_pending_all();
+ blk_finish_plug(&plug);
pr_debug("--- raid5d inactive\n");
}
mdname(mddev));
md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));
- plugger_init(&conf->plug, raid5_unplug);
- mddev->plug = &conf->plug;
if (mddev->queue) {
int chunk_size;
/* read-ahead size must cover two whole stripes, which
mddev->queue->backing_dev_info.congested_data = mddev;
mddev->queue->backing_dev_info.congested_fn = raid5_congested;
- mddev->queue->queue_lock = &conf->device_lock;
chunk_size = mddev->chunk_sectors << 9;
blk_queue_io_min(mddev->queue, chunk_size);
mddev->thread = NULL;
if (mddev->queue)
mddev->queue->backing_dev_info.congested_fn = NULL;
- plugger_flush(&conf->plug); /* the unplug fn references 'conf'*/
free_conf(conf);
mddev->private = NULL;
mddev->to_remove = &raid5_attrs_group;
static void *raid45_takeover_raid0(mddev_t *mddev, int level)
{
struct raid0_private_data *raid0_priv = mddev->private;
+ sector_t sectors;
/* for raid0 takeover only one zone is supported */
if (raid0_priv->nr_strip_zones > 1) {
return ERR_PTR(-EINVAL);
}
+ sectors = raid0_priv->strip_zone[0].zone_end;
+ sector_div(sectors, raid0_priv->strip_zone[0].nb_dev);
+ mddev->dev_sectors = sectors;
mddev->new_level = level;
mddev->new_layout = ALGORITHM_PARITY_N;
mddev->new_chunk_sectors = mddev->chunk_sectors;
git.openpandora.org / pandora-kernel.git / blobdiff