/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* to communicate between kernel and user code.
*/
-/* This is the IEEE-assigned OUI for PathScale, Inc. */
+
+/* This is the IEEE-assigned OUI for QLogic Inc. InfiniPath */
#define IPATH_SRC_OUI_1 0x00
#define IPATH_SRC_OUI_2 0x11
#define IPATH_SRC_OUI_3 0x75
__u64 sps_hwerrs;
/* number of times IB link changed state unexpectedly */
__u64 sps_iblink;
- /* no longer used; left for compatibility */
- __u64 sps_unused3;
+ /* kernel receive interrupts that didn't read intstat */
+ __u64 sps_fastrcvint;
/* number of kernel (port0) packets received */
__u64 sps_port0pkts;
/* number of "ethernet" packets sent by driver */
__u64 sps_ether_spkts;
/* number of "ethernet" packets received by driver */
__u64 sps_ether_rpkts;
- /* number of SMA packets sent by driver */
+ /* number of SMA packets sent by driver. Obsolete. */
__u64 sps_sma_spkts;
- /* number of SMA packets received by driver */
+ /* number of SMA packets received by driver. Obsolete. */
__u64 sps_sma_rpkts;
/* number of times all ports rcvhdrq was full and packet dropped */
__u64 sps_hdrqfull;
__u64 sps_ports;
/* list of pkeys (other than default) accepted (0 means not set) */
__u16 sps_pkeys[4];
- /* lids for up to 4 infinipaths, indexed by infinipath # */
- __u16 sps_lid[4];
+ __u16 sps_unused16[4]; /* available; maintaining compatible layout */
/* number of user ports per chip (not IB ports) */
__u32 sps_nports;
/* not our interrupt, or already handled */
__u64 sps_pageunlocks;
/*
* Number of packets dropped in kernel other than errors (ether
- * packets if ipath not configured, sma/mad, etc.)
+ * packets if ipath not configured, etc.)
*/
__u64 sps_krdrops;
- /* mlids for up to 4 infinipaths, indexed by infinipath # */
- __u16 sps_mlid[4];
+ __u64 sps_txeparity; /* PIO buffer parity error, recovered */
/* pad for future growth */
__u64 __sps_pad[45];
};
#define IPATH_STATUS_DISABLED 0x2 /* hardware disabled */
/* Device has been disabled via admin request */
#define IPATH_STATUS_ADMIN_DISABLED 0x4
-#define IPATH_STATUS_OIB_SMA 0x8 /* ipath_mad kernel SMA running */
-#define IPATH_STATUS_SMA 0x10 /* user SMA running */
/* Chip has been found and initted */
#define IPATH_STATUS_CHIP_PRESENT 0x20
/* IB link is at ACTIVE, usable for data traffic */
#define IPATH_RUNTIME_PCIE 0x2
#define IPATH_RUNTIME_FORCE_WC_ORDER 0x4
#define IPATH_RUNTIME_RCVHDR_COPY 0x8
+#define IPATH_RUNTIME_MASTER 0x10
+#define IPATH_RUNTIME_PBC_REWRITE 0x20
+#define IPATH_RUNTIME_LOOSE_DMA_ALIGN 0x40
/*
* This structure is returned by ipath_userinit() immediately after
/* version of software, for feature checking. */
__u32 spi_sw_version;
/* InfiniPath port assigned, goes into sent packets */
- __u32 spi_port;
+ __u16 spi_port;
+ __u16 spi_subport;
/*
* IB MTU, packets IB data must be less than this.
* The MTU is in bytes, and will be a multiple of 4 bytes.
__u32 spi_tidcnt;
/* size of the TID Eager list in infinipath, in entries */
__u32 spi_tidegrcnt;
- /* size of a single receive header queue entry. */
+ /* size of a single receive header queue entry in words. */
__u32 spi_rcvhdrent_size;
/*
* Count of receive header queue entries allocated.
__u32 spi_rcv_egrchunksize;
/* total size of mmap to cover full rcvegrbuffers */
__u32 spi_rcv_egrbuftotlen;
+ __u32 spi_filler_for_align;
+ /* address of readonly memory copy of the rcvhdrq tail register. */
+ __u64 spi_rcvhdr_tailaddr;
+
+ /* shared memory pages for subports if IPATH_RUNTIME_MASTER is set */
+ __u64 spi_subport_uregbase;
+ __u64 spi_subport_rcvegrbuf;
+ __u64 spi_subport_rcvhdr_base;
+
} __attribute__ ((aligned(8)));
/*
* Minor version differences are always compatible
- * a within a major version, however if if user software is larger
+ * a within a major version, however if user software is larger
* than driver software, some new features and/or structure fields
* may not be implemented; the user code must deal with this if it
- * cares, or it must abort after initialization reports the difference
+ * cares, or it must abort after initialization reports the difference.
*/
-#define IPATH_USER_SWMINOR 2
+#define IPATH_USER_SWMINOR 3
#define IPATH_USER_SWVERSION ((IPATH_USER_SWMAJOR<<16) | IPATH_USER_SWMINOR)
/*
* Similarly, this is the kernel version going back to the user. It's
* slightly different, in that we want to tell if the driver was built as
- * part of a PathScale release, or from the driver from OpenIB, kernel.org,
- * or a standard distribution, for support reasons. The high bit is 0 for
- * non-PathScale, and 1 for PathScale-built/supplied.
+ * part of a QLogic release, or from the driver from openfabrics.org,
+ * kernel.org, or a standard distribution, for support reasons.
+ * The high bit is 0 for non-QLogic and 1 for QLogic-built/supplied.
*
* It's returned by the driver to the user code during initialization in the
* spi_sw_version field of ipath_base_info, so the user code can in turn
__u32 spu_rcvhdrsize;
/*
- * cache line aligned (64 byte) user address to
- * which the rcvhdrtail register will be written by infinipath
- * whenever it changes, so that no chip registers are read in
- * the performance path.
+ * If two or more processes wish to share a port, each process
+ * must set the spu_subport_cnt and spu_subport_id to the same
+ * values. The only restriction on the spu_subport_id is that
+ * it be unique for a given node.
*/
- __u64 spu_rcvhdraddr;
+ __u16 spu_subport_cnt;
+ __u16 spu_subport_id;
+
+ __u32 spu_unused; /* kept for compatible layout */
/*
* address of struct base_info to write to
#define IPATH_CMD_TID_UPDATE 19 /* update expected TID entries */
#define IPATH_CMD_TID_FREE 20 /* free expected TID entries */
#define IPATH_CMD_SET_PART_KEY 21 /* add partition key */
+#define IPATH_CMD_SLAVE_INFO 22 /* return info on slave processes */
-#define IPATH_CMD_MAX 21
+#define IPATH_CMD_MAX 22
struct ipath_port_info {
__u32 num_active; /* number of active units */
__u32 unit; /* unit (chip) assigned to caller */
- __u32 port; /* port on unit assigned to caller */
+ __u16 port; /* port on unit assigned to caller */
+ __u16 subport; /* subport on unit assigned to caller */
+ __u16 num_ports; /* number of ports available on unit */
+ __u16 num_subports; /* number of subport slaves opened on port */
};
struct ipath_tid_info {
__u32 recv_ctrl;
/* partition key to set */
__u16 part_key;
+ /* user address of __u32 bitmask of active slaves */
+ __u64 slave_mask_addr;
} cmd;
};
struct ipath_iovec sps_iov[4];
};
-/* Passed into SMA special file's ->read and ->write methods. */
-struct ipath_sma_pkt
-{
- __u32 unit; /* unit on which to send packet */
- __u64 data; /* address of payload in userspace */
- __u32 len; /* length of payload */
+/* Passed into diag data special file's ->write method. */
+struct ipath_diag_pkt {
+ __u32 unit;
+ __u64 data;
+ __u32 len;
};
/*
* Data layout in I2C flash (for GUID, etc.)
* All fields are little-endian binary unless otherwise stated
*/
-#define IPATH_FLASH_VERSION 1
+#define IPATH_FLASH_VERSION 2
struct ipath_flash {
/* flash layout version (IPATH_FLASH_VERSION) */
__u8 if_fversion;
__u8 if_csum;
/*
* valid length (in use, protected by if_csum), including
- * if_fversion and if_sum themselves)
+ * if_fversion and if_csum themselves)
*/
__u8 if_length;
/* the GUID, in network order */
__u8 if_guid[8];
/* number of GUIDs to use, starting from if_guid */
__u8 if_numguid;
- /* the board serial number, in ASCII */
+ /* the (last 10 characters of) board serial number, in ASCII */
char if_serial[12];
/* board mfg date (YYYYMMDD ASCII) */
char if_mfgdate[8];
__u8 if_powerhour[2];
/* ASCII free-form comment field */
char if_comment[32];
- /* 78 bytes used, min flash size is 128 bytes */
- __u8 if_future[50];
+ /* Backwards compatible prefix for longer QLogic Serial Numbers */
+ char if_sprefix[4];
+ /* 82 bytes used, min flash size is 128 bytes */
+ __u8 if_future[46];
};
/*
/* K_PktFlags bits */
#define INFINIPATH_KPF_INTR 0x1
+#define INFINIPATH_KPF_SUBPORT_MASK 0x3
+#define INFINIPATH_KPF_SUBPORT_SHIFT 1
+
+#define INFINIPATH_MAX_SUBPORT 4
/* SendPIO per-buffer control */
-#define INFINIPATH_SP_LENGTHP1_MASK 0x3FF
-#define INFINIPATH_SP_LENGTHP1_SHIFT 0
-#define INFINIPATH_SP_INTR 0x80000000
-#define INFINIPATH_SP_TEST 0x40000000
-#define INFINIPATH_SP_TESTEBP 0x20000000
+#define INFINIPATH_SP_TEST 0x40
+#define INFINIPATH_SP_TESTEBP 0x20
/* SendPIOAvail bits */
#define INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT 1
#define INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT 0
+/* infinipath header format */
+struct ipath_header {
+ /*
+ * Version - 4 bits, Port - 4 bits, TID - 10 bits and Offset -
+ * 14 bits before ECO change ~28 Dec 03. After that, Vers 4,
+ * Port 4, TID 11, offset 13.
+ */
+ __le32 ver_port_tid_offset;
+ __le16 chksum;
+ __le16 pkt_flags;
+};
+
+/* infinipath user message header format.
+ * This structure contains the first 4 fields common to all protocols
+ * that employ infinipath.
+ */
+struct ipath_message_header {
+ __be16 lrh[4];
+ __be32 bth[3];
+ /* fields below this point are in host byte order */
+ struct ipath_header iph;
+ __u8 sub_opcode;
+};
+
+/* infinipath ethernet header format */
+struct ether_header {
+ __be16 lrh[4];
+ __be32 bth[3];
+ struct ipath_header iph;
+ __u8 sub_opcode;
+ __u8 cmd;
+ __be16 lid;
+ __u16 mac[3];
+ __u8 frag_num;
+ __u8 seq_num;
+ __le32 len;
+ /* MUST be of word size due to PIO write requirements */
+ __le32 csum;
+ __le16 csum_offset;
+ __le16 flags;
+ __u16 first_2_bytes;
+ __u8 unused[2]; /* currently unused */
+};
+
+
+/* IB - LRH header consts */
+#define IPATH_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */
+#define IPATH_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */
+
+/* misc. */
+#define SIZE_OF_CRC 1
+
+#define IPATH_DEFAULT_P_KEY 0xFFFF
+#define IPATH_PERMISSIVE_LID 0xFFFF
+#define IPATH_AETH_CREDIT_SHIFT 24
+#define IPATH_AETH_CREDIT_MASK 0x1F
+#define IPATH_AETH_CREDIT_INVAL 0x1F
+#define IPATH_PSN_MASK 0xFFFFFF
+#define IPATH_MSN_MASK 0xFFFFFF
+#define IPATH_QPN_MASK 0xFFFFFF
+#define IPATH_MULTICAST_LID_BASE 0xC000
+#define IPATH_MULTICAST_QPN 0xFFFFFF
+
+/* Receive Header Queue: receive type (from infinipath) */
+#define RCVHQ_RCV_TYPE_EXPECTED 0
+#define RCVHQ_RCV_TYPE_EAGER 1
+#define RCVHQ_RCV_TYPE_NON_KD 2
+#define RCVHQ_RCV_TYPE_ERROR 3
+
+
+/* sub OpCodes - ith4x */
+#define IPATH_ITH4X_OPCODE_ENCAP 0x81
+#define IPATH_ITH4X_OPCODE_LID_ARP 0x82
+
+#define IPATH_HEADER_QUEUE_WORDS 9
+
+/* functions for extracting fields from rcvhdrq entries for the driver.
+ */
+static inline __u32 ipath_hdrget_err_flags(const __le32 * rbuf)
+{
+ return __le32_to_cpu(rbuf[1]);
+}
+
+static inline __u32 ipath_hdrget_rcv_type(const __le32 * rbuf)
+{
+ return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_RCVTYPE_SHIFT)
+ & INFINIPATH_RHF_RCVTYPE_MASK;
+}
+
+static inline __u32 ipath_hdrget_length_in_bytes(const __le32 * rbuf)
+{
+ return ((__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_LENGTH_SHIFT)
+ & INFINIPATH_RHF_LENGTH_MASK) << 2;
+}
+
+static inline __u32 ipath_hdrget_index(const __le32 * rbuf)
+{
+ return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_EGRINDEX_SHIFT)
+ & INFINIPATH_RHF_EGRINDEX_MASK;
+}
+
+static inline __u32 ipath_hdrget_ipath_ver(__le32 hdrword)
+{
+ return (__le32_to_cpu(hdrword) >> INFINIPATH_I_VERS_SHIFT)
+ & INFINIPATH_I_VERS_MASK;
+}
+
#endif /* _IPATH_COMMON_H */
git.openpandora.org / pandora-kernel.git / blobdiff