*
*/
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/slab.h>
/* Module Parameters */
static int phys_dma = 1;
-module_param(phys_dma, int, 0644);
+module_param(phys_dma, int, 0444);
MODULE_PARM_DESC(phys_dma, "Enable physical dma (default = 1).");
static void dma_trm_tasklet(unsigned long data);
* register content.
* To actually enable physical responses is the job of our interrupt
* handler which programs the physical request filter. */
- reg_write(ohci, OHCI1394_PhyUpperBound, 0x01000000);
+ reg_write(ohci, OHCI1394_PhyUpperBound,
+ OHCI1394_PHYS_UPPER_BOUND_PROGRAMMED >> 16);
DBGMSG("physUpperBoundOffset=%08x",
reg_read(ohci, OHCI1394_PhyUpperBound));
OHCI1394_isochRx |
OHCI1394_isochTx |
OHCI1394_postedWriteErr |
+ OHCI1394_cycleTooLong |
OHCI1394_cycleInconsistent);
/* Enable link */
buf = reg_read(ohci, OHCI1394_Version);
sprintf (irq_buf, "%d", ohci->dev->irq);
PRINT(KERN_INFO, "OHCI-1394 %d.%d (PCI): IRQ=[%s] "
- "MMIO=[%lx-%lx] Max Packet=[%d] IR/IT contexts=[%d/%d]",
+ "MMIO=[%llx-%llx] Max Packet=[%d] IR/IT contexts=[%d/%d]",
((((buf) >> 16) & 0xf) + (((buf) >> 20) & 0xf) * 10),
((((buf) >> 4) & 0xf) + ((buf) & 0xf) * 10), irq_buf,
- pci_resource_start(ohci->dev, 0),
- pci_resource_start(ohci->dev, 0) + OHCI1394_REGISTER_SIZE - 1,
+ (unsigned long long)pci_resource_start(ohci->dev, 0),
+ (unsigned long long)pci_resource_start(ohci->dev, 0) + OHCI1394_REGISTER_SIZE - 1,
ohci->max_packet_size,
ohci->nb_iso_rcv_ctx, ohci->nb_iso_xmit_ctx);
PRINT(KERN_ERR, "physical posted write error");
/* no recovery strategy yet, had to involve protocol drivers */
}
+ if (event & OHCI1394_cycleTooLong) {
+ if(printk_ratelimit())
+ PRINT(KERN_WARNING, "isochronous cycle too long");
+ else
+ DBGMSG("OHCI1394_cycleTooLong");
+ reg_write(ohci, OHCI1394_LinkControlSet,
+ OHCI1394_LinkControl_CycleMaster);
+ event &= ~OHCI1394_cycleTooLong;
+ }
if (event & OHCI1394_cycleInconsistent) {
/* We subscribe to the cycleInconsistent event only to
* clear the corresponding event bit... otherwise,
{
struct hpsb_host *host;
struct ti_ohci *ohci; /* shortcut to currently handled device */
- unsigned long ohci_base;
+ resource_size_t ohci_base;
if (pci_enable_device(dev))
FAIL(-ENXIO, "Failed to enable OHCI hardware");
* clearly says it's 2kb, so this shouldn't be a problem. */
ohci_base = pci_resource_start(dev, 0);
if (pci_resource_len(dev, 0) < OHCI1394_REGISTER_SIZE)
- PRINT(KERN_WARNING, "PCI resource length of %lx too small!",
- pci_resource_len(dev, 0));
+ PRINT(KERN_WARNING, "PCI resource length of 0x%llx too small!",
+ (unsigned long long)pci_resource_len(dev, 0));
/* Seems PCMCIA handles this internally. Not sure why. Seems
* pretty bogus to force a driver to special case this. */
#ifndef PCMCIA
if (!request_mem_region (ohci_base, OHCI1394_REGISTER_SIZE, OHCI1394_DRIVER_NAME))
- FAIL(-ENOMEM, "MMIO resource (0x%lx - 0x%lx) unavailable",
- ohci_base, ohci_base + OHCI1394_REGISTER_SIZE);
+ FAIL(-ENOMEM, "MMIO resource (0x%llx - 0x%llx) unavailable",
+ (unsigned long long)ohci_base,
+ (unsigned long long)ohci_base + OHCI1394_REGISTER_SIZE);
#endif
ohci->init_state = OHCI_INIT_HAVE_MEM_REGION;
spin_lock_init(&ohci->event_lock);
/*
- * interrupts are disabled, all right, but... due to SA_SHIRQ we
+ * interrupts are disabled, all right, but... due to IRQF_SHARED we
* might get called anyway. We'll see no event, of course, but
* we need to get to that "no event", so enough should be initialized
* by that point.
*/
- if (request_irq(dev->irq, ohci_irq_handler, SA_SHIRQ,
+ if (request_irq(dev->irq, ohci_irq_handler, IRQF_SHARED,
OHCI1394_DRIVER_NAME, ohci))
FAIL(-ENOMEM, "Failed to allocate shared interrupt %d", dev->irq);
host->csr.max_rec = (reg_read(ohci, OHCI1394_BusOptions) >> 12) & 0xf;
host->csr.lnk_spd = reg_read(ohci, OHCI1394_BusOptions) & 0x7;
+ if (phys_dma) {
+ host->low_addr_space =
+ (u64) reg_read(ohci, OHCI1394_PhyUpperBound) << 16;
+ if (!host->low_addr_space)
+ host->low_addr_space = OHCI1394_PHYS_UPPER_BOUND_FIXED;
+ }
+ host->middle_addr_space = OHCI1394_MIDDLE_ADDRESS_SPACE;
+
/* Tell the highlevel this host is ready */
if (hpsb_add_host(host))
FAIL(-ENOMEM, "Failed to register host with highlevel");
case OHCI_INIT_HAVE_TXRX_BUFFERS__MAYBE:
/* The ohci_soft_reset() stops all DMA contexts, so we
* dont need to do this. */
- /* Free AR dma */
free_dma_rcv_ctx(&ohci->ar_req_context);
free_dma_rcv_ctx(&ohci->ar_resp_context);
-
- /* Free AT dma */
free_dma_trm_ctx(&ohci->at_req_context);
free_dma_trm_ctx(&ohci->at_resp_context);
-
- /* Free IR dma */
free_dma_rcv_ctx(&ohci->ir_legacy_context);
-
- /* Free IT dma */
free_dma_trm_ctx(&ohci->it_legacy_context);
- /* Free IR legacy dma */
- free_dma_rcv_ctx(&ohci->ir_legacy_context);
-
-
case OHCI_INIT_HAVE_SELFID_BUFFER:
pci_free_consistent(ohci->dev, OHCI1394_SI_DMA_BUF_SIZE,
ohci->selfid_buf_cpu,
}
#endif /* CONFIG_PPC_PMAC */
+ pci_restore_state(pdev);
pci_enable_device(pdev);
return 0;
static int ohci1394_pci_suspend (struct pci_dev *pdev, pm_message_t state)
{
+ pci_save_state(pdev);
+
#ifdef CONFIG_PPC_PMAC
if (machine_is(powermac)) {
struct device_node *of_node;
git.openpandora.org / pandora-kernel.git / blobdiff