ide: add "vlb|pci_clock=" parameter
[pandora-kernel.git] / drivers / ide / pci / aec62xx.c
index 7f4d185..7f46c22 100644 (file)
@@ -1,6 +1,4 @@
 /*
- * linux/drivers/ide/pci/aec62xx.c             Version 0.27    Sep 16, 2007
- *
  * Copyright (C) 1999-2002     Andre Hedrick <andre@linux-ide.org>
  * Copyright (C) 2007          MontaVista Software, Inc. <source@mvista.com>
  *
@@ -9,7 +7,6 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/pci.h>
-#include <linux/delay.h>
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #include <linux/init.h>
@@ -90,7 +87,7 @@ static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entr
 static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
 {
        ide_hwif_t *hwif        = HWIF(drive);
-       struct pci_dev *dev     = hwif->pci_dev;
+       struct pci_dev *dev     = to_pci_dev(hwif->dev);
        u16 d_conf              = 0;
        u8 ultra = 0, ultra_conf = 0;
        u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
@@ -116,7 +113,7 @@ static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
 static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
 {
        ide_hwif_t *hwif        = HWIF(drive);
-       struct pci_dev *dev     = hwif->pci_dev;
+       struct pci_dev *dev     = to_pci_dev(hwif->dev);
        u8 unit         = (drive->select.b.unit & 0x01);
        u8 tmp1 = 0, tmp2 = 0;
        u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
@@ -138,12 +135,12 @@ static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
 
 static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
-       drive->hwif->set_dma_mode(drive, pio + XFER_PIO_0);
+       drive->hwif->port_ops->set_dma_mode(drive, pio + XFER_PIO_0);
 }
 
 static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name)
 {
-       int bus_speed = system_bus_clock();
+       int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock();
 
        if (bus_speed <= 33)
                pci_set_drvdata(dev, (void *) aec6xxx_33_base);
@@ -168,40 +165,36 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch
        return dev->irq;
 }
 
-static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
+static u8 __devinit atp86x_cable_detect(ide_hwif_t *hwif)
 {
-       struct pci_dev *dev     = hwif->pci_dev;
-
-       hwif->set_pio_mode = &aec_set_pio_mode;
-
-       if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
-               hwif->set_dma_mode = &aec6210_set_mode;
-       else
-               hwif->set_dma_mode = &aec6260_set_mode;
-
-       if (hwif->dma_base == 0)
-               return;
+       struct pci_dev *dev = to_pci_dev(hwif->dev);
+       u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
 
-       if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
-               return;
+       pci_read_config_byte(dev, 0x49, &ata66);
 
-       if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
-               u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
+       return (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
 
-               pci_read_config_byte(hwif->pci_dev, 0x49, &ata66);
+static const struct ide_port_ops atp850_port_ops = {
+       .set_pio_mode           = aec_set_pio_mode,
+       .set_dma_mode           = aec6210_set_mode,
+};
 
-               hwif->cbl = (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-       }
-}
+static const struct ide_port_ops atp86x_port_ops = {
+       .set_pio_mode           = aec_set_pio_mode,
+       .set_dma_mode           = aec6260_set_mode,
+       .cable_detect           = atp86x_cable_detect,
+};
 
 static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
        {       /* 0 */
                .name           = "AEC6210",
                .init_chipset   = init_chipset_aec62xx,
-               .init_hwif      = init_hwif_aec62xx,
                .enablebits     = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
+               .port_ops       = &atp850_port_ops,
                .host_flags     = IDE_HFLAG_SERIALIZE |
                                  IDE_HFLAG_NO_ATAPI_DMA |
+                                 IDE_HFLAG_NO_DSC |
                                  IDE_HFLAG_ABUSE_SET_DMA_MODE |
                                  IDE_HFLAG_OFF_BOARD,
                .pio_mask       = ATA_PIO4,
@@ -210,7 +203,7 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
        },{     /* 1 */
                .name           = "AEC6260",
                .init_chipset   = init_chipset_aec62xx,
-               .init_hwif      = init_hwif_aec62xx,
+               .port_ops       = &atp86x_port_ops,
                .host_flags     = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_AUTODMA |
                                  IDE_HFLAG_ABUSE_SET_DMA_MODE |
                                  IDE_HFLAG_OFF_BOARD,
@@ -220,17 +213,18 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
        },{     /* 2 */
                .name           = "AEC6260R",
                .init_chipset   = init_chipset_aec62xx,
-               .init_hwif      = init_hwif_aec62xx,
                .enablebits     = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
+               .port_ops       = &atp86x_port_ops,
                .host_flags     = IDE_HFLAG_NO_ATAPI_DMA |
-                                 IDE_HFLAG_ABUSE_SET_DMA_MODE,
+                                 IDE_HFLAG_ABUSE_SET_DMA_MODE |
+                                 IDE_HFLAG_NON_BOOTABLE,
                .pio_mask       = ATA_PIO4,
                .mwdma_mask     = ATA_MWDMA2,
                .udma_mask      = ATA_UDMA4,
        },{     /* 3 */
                .name           = "AEC6280",
                .init_chipset   = init_chipset_aec62xx,
-               .init_hwif      = init_hwif_aec62xx,
+               .port_ops       = &atp86x_port_ops,
                .host_flags     = IDE_HFLAG_NO_ATAPI_DMA |
                                  IDE_HFLAG_ABUSE_SET_DMA_MODE |
                                  IDE_HFLAG_OFF_BOARD,
@@ -240,8 +234,8 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
        },{     /* 4 */
                .name           = "AEC6280R",
                .init_chipset   = init_chipset_aec62xx,
-               .init_hwif      = init_hwif_aec62xx,
                .enablebits     = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
+               .port_ops       = &atp86x_port_ops,
                .host_flags     = IDE_HFLAG_NO_ATAPI_DMA |
                                  IDE_HFLAG_ABUSE_SET_DMA_MODE |
                                  IDE_HFLAG_OFF_BOARD,