-/*
- * stridx() returns the offset of c within s,
- * or -1 if c is '\0' or not found within s.
- */
-static int __init stridx (const char *s, char c)
-{
- char *i = strchr(s, c);
- return (i && c) ? i - s : -1;
-}
-
-/*
- * match_parm() does parsing for ide_setup():
- *
- * 1. the first char of s must be '='.
- * 2. if the remainder matches one of the supplied keywords,
- * the index (1 based) of the keyword is negated and returned.
- * 3. if the remainder is a series of no more than max_vals numbers
- * separated by commas, the numbers are saved in vals[] and a
- * count of how many were saved is returned. Base10 is assumed,
- * and base16 is allowed when prefixed with "0x".
- * 4. otherwise, zero is returned.
- */
-static int __init match_parm (char *s, const char *keywords[], int vals[], int max_vals)
-{
- static const char *decimal = "0123456789";
- static const char *hex = "0123456789abcdef";
- int i, n;
-
- if (*s++ == '=') {
- /*
- * Try matching against the supplied keywords,
- * and return -(index+1) if we match one
- */
- if (keywords != NULL) {
- for (i = 0; *keywords != NULL; ++i) {
- if (!strcmp(s, *keywords++))
- return -(i+1);
- }
- }
- /*
- * Look for a series of no more than "max_vals"
- * numeric values separated by commas, in base10,
- * or base16 when prefixed with "0x".
- * Return a count of how many were found.
- */
- for (n = 0; (i = stridx(decimal, *s)) >= 0;) {
- vals[n] = i;
- while ((i = stridx(decimal, *++s)) >= 0)
- vals[n] = (vals[n] * 10) + i;
- if (*s == 'x' && !vals[n]) {
- while ((i = stridx(hex, *++s)) >= 0)
- vals[n] = (vals[n] * 0x10) + i;
- }
- if (++n == max_vals)
- break;
- if (*s == ',' || *s == ';')
- ++s;
- }
- if (!*s)
- return n;
- }
- return 0; /* zero = nothing matched */
-}
-
-/*
- * ide_setup() gets called VERY EARLY during initialization,
- * to handle kernel "command line" strings beginning with "hdx=" or "ide".
- *
- * Remember to update Documentation/ide/ide.txt if you change something here.
- */
-static int __init ide_setup(char *s)
-{
- ide_hwif_t *hwif;
- ide_drive_t *drive;
- unsigned int hw, unit;
- int vals[3];
- const char max_drive = 'a' + ((MAX_HWIFS * MAX_DRIVES) - 1);
-
- if (strncmp(s,"hd",2) == 0 && s[2] == '=') /* hd= is for hd.c */
- return 0; /* driver and not us */
-
- if (strncmp(s,"ide",3) && strncmp(s,"idebus",6) && strncmp(s,"hd",2))
- return 0;
-
- printk(KERN_INFO "ide_setup: %s", s);
- init_ide_data ();
-
-#ifdef CONFIG_BLK_DEV_IDEDOUBLER
- if (!strcmp(s, "ide=doubler")) {
- extern int ide_doubler;
-
- printk(" : Enabled support for IDE doublers\n");
- ide_doubler = 1;
- goto obsolete_option;
- }
-#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
-
- if (!strcmp(s, "ide=nodma")) {
- printk(" : Prevented DMA\n");
- noautodma = 1;
- goto obsolete_option;
- }
-
-#ifdef CONFIG_BLK_DEV_IDEACPI
- if (!strcmp(s, "ide=noacpi")) {
- //printk(" : Disable IDE ACPI support.\n");
- ide_noacpi = 1;
- goto obsolete_option;
- }
- if (!strcmp(s, "ide=acpigtf")) {
- //printk(" : Enable IDE ACPI _GTF support.\n");
- ide_acpigtf = 1;
- goto obsolete_option;
- }
- if (!strcmp(s, "ide=acpionboot")) {
- //printk(" : Call IDE ACPI methods on boot.\n");
- ide_acpionboot = 1;
- goto obsolete_option;
- }
-#endif /* CONFIG_BLK_DEV_IDEACPI */
-
- /*
- * Look for drive options: "hdx="
- */
- if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) {
- const char *hd_words[] = {
- "none", "noprobe", "nowerr", "cdrom", "nodma",
- "-6", "-7", "-8", "-9", "-10",
- "noflush", "remap", "remap63", "scsi", NULL };
- unit = s[2] - 'a';
- hw = unit / MAX_DRIVES;
- unit = unit % MAX_DRIVES;
- hwif = &ide_hwifs[hw];
- drive = &hwif->drives[unit];
- if (strncmp(s + 4, "ide-", 4) == 0) {
- strlcpy(drive->driver_req, s + 4, sizeof(drive->driver_req));
- goto obsolete_option;
- }
- switch (match_parm(&s[3], hd_words, vals, 3)) {
- case -1: /* "none" */
- case -2: /* "noprobe" */
- drive->noprobe = 1;
- goto obsolete_option;
- case -3: /* "nowerr" */
- drive->bad_wstat = BAD_R_STAT;
- goto obsolete_option;
- case -4: /* "cdrom" */
- drive->present = 1;
- drive->media = ide_cdrom;
- /* an ATAPI device ignores DRDY */
- drive->ready_stat = 0;
- goto obsolete_option;
- case -5: /* nodma */
- drive->nodma = 1;
- goto obsolete_option;
- case -11: /* noflush */
- drive->noflush = 1;
- goto obsolete_option;
- case -12: /* "remap" */
- drive->remap_0_to_1 = 1;
- goto obsolete_option;
- case -13: /* "remap63" */
- drive->sect0 = 63;
- goto obsolete_option;
- case -14: /* "scsi" */
- drive->scsi = 1;
- goto obsolete_option;
- case 3: /* cyl,head,sect */
- drive->media = ide_disk;
- drive->ready_stat = READY_STAT;
- drive->cyl = drive->bios_cyl = vals[0];
- drive->head = drive->bios_head = vals[1];
- drive->sect = drive->bios_sect = vals[2];
- drive->present = 1;
- drive->forced_geom = 1;
- goto obsolete_option;
- default:
- goto bad_option;
- }
- }
-
- if (s[0] != 'i' || s[1] != 'd' || s[2] != 'e')
- goto bad_option;
- /*
- * Look for bus speed option: "idebus="
- */
- if (s[3] == 'b' && s[4] == 'u' && s[5] == 's') {
- if (match_parm(&s[6], NULL, vals, 1) != 1)
- goto bad_option;
- if (vals[0] >= 20 && vals[0] <= 66) {
- idebus_parameter = vals[0];
- } else
- printk(" -- BAD BUS SPEED! Expected value from 20 to 66");
- goto obsolete_option;
- }
-
-bad_option:
- printk(" -- BAD OPTION\n");
- return 1;
-obsolete_option:
- printk(" -- OBSOLETE OPTION, WILL BE REMOVED SOON!\n");
- return 1;
-}
-
-EXPORT_SYMBOL(ide_lock);
-