ide-cd: convert to ide-atapi facilities

[pandora-kernel.git] / drivers / ide / ide-cd.c

diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 2cb301d..cae6937 100644 (file)
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -510,99 +510,6 @@ end_request:
        return 1;
 }
 
-static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *);
-static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
-
-/*
- * Set up the device registers for transferring a packet command on DEV,
- * expecting to later transfer XFERLEN bytes.  HANDLER is the routine
- * which actually transfers the command to the drive.  If this is a
- * drq_interrupt device, this routine will arrange for HANDLER to be
- * called when the interrupt from the drive arrives.  Otherwise, HANDLER
- * will be called immediately after the drive is prepared for the transfer.
- */
-static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive)
-{
-       ide_hwif_t *hwif = drive->hwif;
-       struct request *rq = hwif->rq;
-       int xferlen;
-
-       xferlen = ide_cd_get_xferlen(rq);
-
-       ide_debug_log(IDE_DBG_PC, "Call %s, xferlen: %d\n", __func__, xferlen);
-
-       /* FIXME: for Virtual DMA we must check harder */
-       if (drive->dma)
-               drive->dma = !hwif->dma_ops->dma_setup(drive);
-
-       /* set up the controller registers */
-       ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL,
-                          xferlen, drive->dma);
-
-       if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
-               /* waiting for CDB interrupt, not DMA yet. */
-               if (drive->dma)
-                       drive->waiting_for_dma = 0;
-
-               /* packet command */
-               ide_execute_command(drive, ATA_CMD_PACKET,
-                                   cdrom_transfer_packet_command,
-                                   ATAPI_WAIT_PC, ide_cd_expiry);
-               return ide_started;
-       } else {
-               ide_execute_pkt_cmd(drive);
-
-               return cdrom_transfer_packet_command(drive);
-       }
-}
-
-/*
- * Send a packet command to DRIVE described by CMD_BUF and CMD_LEN. The device
- * registers must have already been prepared by cdrom_start_packet_command.
- * HANDLER is the interrupt handler to call when the command completes or
- * there's data ready.
- */
-#define ATAPI_MIN_CDB_BYTES 12
-static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive)
-{
-       ide_hwif_t *hwif = drive->hwif;
-       struct request *rq = hwif->rq;
-       int cmd_len;
-       ide_startstop_t startstop;
-
-       ide_debug_log(IDE_DBG_PC, "Call %s\n", __func__);
-
-       /* we must wait for DRQ to get set */
-       if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) {
-               printk(KERN_ERR "%s: timeout while waiting for DRQ to assert\n",
-                               drive->name);
-               return startstop;
-       }
-
-       if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
-               /* ok, next interrupt will be DMA interrupt */
-               if (drive->dma)
-                       drive->waiting_for_dma = 1;
-       }
-
-       /* arm the interrupt handler */
-       ide_set_handler(drive, cdrom_newpc_intr, rq->timeout, ide_cd_expiry);
-
-       /* ATAPI commands get padded out to 12 bytes minimum */
-       cmd_len = COMMAND_SIZE(rq->cmd[0]);
-       if (cmd_len < ATAPI_MIN_CDB_BYTES)
-               cmd_len = ATAPI_MIN_CDB_BYTES;
-
-       /* start the DMA if need be */
-       if (drive->dma)
-               hwif->dma_ops->dma_start(drive);
-
-       /* send the command to the device */
-       hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len);
-
-       return ide_started;
-}
-
 /*
  * Check the contents of the interrupt reason register from the cdrom
  * and attempt to recover if there are problems.  Returns  0 if everything's
@@ -1174,7 +1081,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
                return ide_stopped;
        }
 
-       return cdrom_start_packet_command(drive);
+       return ide_issue_pc(drive);
 }
 
 /*
@@ -2072,6 +1979,7 @@ static int ide_cd_probe(ide_drive_t *drive)
        }
 
        drive->debug_mask = debug_mask;
+       drive->irq_handler = cdrom_newpc_intr;
 
        info = kzalloc(sizeof(struct cdrom_info), GFP_KERNEL);
        if (info == NULL) {